I had buds every where, a lot of flower and she smells really good. am very excited to taste her, i hope she has a good high with very nice taste

I started germination of 3 Amnesiac beans on 29/12/2020. I pre moistened my rockwool cubes with ph balanced water to 6.4. Made sure the plugs were just damp and not soaked. Using a small wooden dowel I increased the size of the plugs pre made holes. Than I sowed my beans into the holes. Ripped off a small piece of rockwool and mulched it up. Lightly filled the holes in with the mulched rockwool. Than stuck the plugs into a misted humidity dome, to complete germination. Shouldn't take anymore than 4-5 days to see some sprouts. Once I see some cotlydon leaves bursting to the surface. I will get the plugs planted into some 1 gallon pots. Plus get these ladies situated into their home. Cant wait! Some background information on my first run with Amnesiac. She was super powerful straight out the gate. Hammering off quite the amount of veg growth in 6 weeks. She was a little stingy on nitrogen and really wanted s slightly decreased dose from my norm but nothing to extreme. She was the tallest in the room going into flower and she was quite the stretcher. She gained about 250% size after the first 2 weeks of bloom. Leading to me supercropping her at that point. She didnt mind the hst one bit! Was back to growing and turning her bud sites up withing about 12 hours. She resulted in a great quantity of high quality flowers. Very fat chunky colas just coated in trichomes. Looking to knock her out of the park even further this time around!

Just let the plants Cruze this week. Some training and defoliation was done to some of the plants.

***Sponsored Grow*** = Medic || https://medicgrow.com || Grow = ***Sponsored Grow*** Not a whole lot is happening this week, still having some PH issues in the medium, I believe this is from the microbial mass I added a while back. A microbe product, PH going into the medium is around 6.5-6.8 and coming out is between 5.5-5.8, so something is acidifying it up. Also noticed the runoff last week was a bit higher at times. So lowered the feed down quite a bit, going in at 1.4EC vs 1.8 will bump it up to 1.5 and 1.6 in the next few weeks. I also added in a bit of a PK booster. nothing to crazy only 60ppm worth on a total allowance of 700PPM Lights now running at 100% with V1 spectrum, decided to go with 100% now vs after stretch, will see how it works out. Till next week. ***Sponsored Grow*** Official Website: https://medicgrow.com/ Facebook: https://www.facebook.com/medicgrowled Twitter: https://twitter.com/medicgrow Instagram: https://www.instagram.com/medicgrow420/ YouTube: https://www.youtube.com/channel/UCNmiY4F9z94u-8eGj7R1CSQ Growdiaries: https://growdiaries.com/grower/medicgrowled https://growdiaries.com/grow-lights/medic-grow

📆 Semana 10: La Candy Bubatz XL se encuentra en su punto álgido de floración, mostrando todo su potencial genético. Los cogollos están completamente desarrollados, cubiertos por una gruesa capa de resina que le da un aspecto brillante y pegajoso. El aroma es profundo y complejo, muy característico de esta variedad. La mayoría de los pistilos están oscuros y retraídos, mientras que los tricomas presentan una mezcla ideal de lechosos y ámbar, señalando que la cosecha se aproxima. 🌿 La planta sigue fuerte y sana. ¡Seguimos creciendo fuerte! 💪

I had to move the grow to another house and break a lot of steams. 2 main stems are broken (hst) and some secundary ones, but besides that everything is going smooth. They are recovering well.

Hello Growmies, The first week of flowering has wrapped up, and I'm pleased to report that she's stretched evenly through the ScrOG. I've been doing some light defoliation where leaves were overshadowing other shoots. She's showing a clear preference for a pH below 6. Anytime it creeps above that, the plant begins to experience nutrient lockout. I'm keeping a close eye on this and will adjust the pH as necessary. Her root system is expanding robustly, gearing up for increased growth above ground. To support this, I've upped the dosage of Orca along with the boost accelerator. Here's a bonus for you all: enter the code ZAMMIGD2023 at checkout in Zamnesia's online store for a 20% discount. Thanks for stopping by, and stay tuned for more updates next week!

Esta semana he regado solo con oro negro 2ml x litro de agua y organic power 1ml x litro de agua el resto de la semana solo con agua, he medido las ppm y en el drenaje me ha dado 1040. Me preocupa un poco el color de los tallos de las hojas que están de color morado, pero solo a las de maceta, a la que esta en tierra la veo bien, es mas le he sacado las ramas bajas para que no gaste energía en criar esos coquitos que salen pequeños.

Royal haze in the 11th week It's supposed to be a 12 week finisher but think it may go a week longer I've just done a major defoliation to allow all the bud sites to get nice and fat , I had started to cut the nutes down but have put them back upto 4ml a and b per litre again , the 6 photoperiod are on 2ml a and b and 4 ml per litre of rhisotonic , out of the NL , Wedding gelato and zkittles the zkittles has been the best strain so far

🗓️ Veg – Week 4 complete (2 days late 😅) Nothing but good news this week: The 15L pots are already fully rooted after just one week – much faster than expected. The plants are looking healthy and full of energy 🌿 I’m still going very light on the nutrients – currently at about 50% of the Advanced Nutrients schedule. Still, they’re clearly starting to take in more – you can feel the momentum building 🚀 Regular LST has also paid off – the structure is opening up nicely, staying compact and well-exposed to light 🔧🌱 And here’s a major milestone to wrap up veg: I switched to 12/12 right at the beginning of Week 5 – flowering phase is officially on! 🌸

She was always thirsty! She drank almost as much as my 10ft tall plant & she was under 2ft tall?! Handled LST very well. She had an abundance of leaves which looked like a beautiful canna-bush growing but come trim time ugh not so much. Her leaves started turning darker purple the last two weeks, making her even prettier! She was only 14 inches tall (LST) & wound up having 65 bud sites.

Nothing too wild happened this week. I trimmed her up a bit today before taking pictures, she’s looking good. Doesn’t seem like much is really going on with the plant, but the buds do seem to be getting bigger. While trimming today, I think I found a spider in the leaves I removed. Should I be worried about this? It’s either eating insects or it’s just in there right? Hopefully there are no bugs for this thing to eat. 4 more weeks of flower. Wednesday update: Had an issue. Seems my timers stopped working. Light and filters/fans. Not sure when it happened, but I've reset lights to the normal time setting. Hope this doesn't affect her

Im falling in love, cos thoose our babe's makes US 🤩😋🤩 ..., that Last 3 weeks. Jeep on rollin baby

Let’s Go day 29!! This week went real nice ! Girls are staying very healthy and building up nicely and even started showing signs of female sex which is super great ! We started doing a little bit of leaf tuck training method on em , nothing to big as like I said I want these girls just to do there thang an grow more on naturally side! My Air temp and Humidity have been on point all week, staying from 70-75 degrees throughout the day and humidity staying around 58-61% humidity , my girls are loving that summer an 75 feeling !! Can’t wait to see what we do this week ! Hopefully you all enjoy, and are ready for another great productive week ! Peace love an positive vibes to y’all Cheers 😶‍🌫️💨💨💨💨🤙🏻Happy Grows✌️🏻Week 4 let’s get it !

The cannabis strain Grape Guava can be a purple strain, depending on its specific phenotype and genetic makeup. While not all phenotypes of Grape Guava are purple, some variations, such as the Zatix Grape Guava, are noted for their striking purple appearance due to the genetic expression of anthocyanin pigments. In a garden of green, Grape Guava gleams, With its fruity aroma, enchanting dreams. Clusters of grapes, guava's sweetness ignite, A strain so divine, in purple and white. Euphoria whispers, a lush fruity haze, Grape Guava's embrace, a tranquil daze. Off and away.@1400ppm. The increased CO2 allows plants to thrive at higher temperatures, which in turn necessitates higher humidity to maintain the ideal VPD for healthy growth and transpiration. 80F -5F = 75F LST with 70% RH = 0.72 kPa. Higher temperatures and humidity promote rapid growth, nutrient uptake, and photosynthesis while maintaining a lower stress level. Temperature influences the rate of enzymatic reactions involved in aerobic respiration. Enzymes, such as those involved in glycolysis, the Krebs cycle, and the electron transport chain, work most efficiently at an optimal temperature range. In low temperatures, enzymatic activity will slow down, thus reducing the rate of aerobic respiration. In high temperatures, enzymes can become denatured, thus impairing their function and stopping the process of aerobic respiration. Glucose is the primary fuel for aerobic respiration. The rate of aerobic respiration increases with the availability of glucose, as it is the starting point for glycolysis. If glucose levels are low, cells may rely on alternative energy sources such as fatty acids or amino acids , but these processes may yield less ATP or be less efficient. To determine this effect, carbon dioxide volume was measured (as carbon dioxide is an output of aerobic respiration) A seed germinated via skotomorphogenesis (in the dark) will generally develop faster in its initial stages to reach light, though it will be etiolated (elongated and weak) and will switch to slower, more robust photomorphogenesis (light development) once it emerges into light. While skotomorphogenesis is a rapid, growth-oriented process for soil escape, it's a temporary phase; photomorphogenesis is a more sustainable development program that prepares the seedling for photosynthesis. 18/6 with the 6 being IR instead of darkness, keeping temps overnight a neat 77F-80F. PPFD overnight 1.8. Think of my tent as a lung. What goes in must come out. When the rate of air going out exceeds the amount of air coming in, it creates a negative pressure. Tent concaves (bends in). If set up correctly, your RH will begin to drop slowly to the desired level you set, and the extraction turns off when it reaches 50% RH. The plant, as it performs cellular respiration, will always be releasing more water into the air, so the RH% of the tent overnight will always increase, so long as oxidative phosphorylation is occurring. As soon as the RH% creeps back up to 55%, the extraction turns back on, over and over, this creates a strong pressure differential which will work wonders on your grow. replicating high and low pressure fronts in nature, critical for oxygen diffusion, but more importantly, full control of your RH%. Moisture will not transfer from a saturated atmosphere to another if that air is already at or above its saturation point, meaning the air can't hold any more water vapor. Once I understood that water is produced as a by product during cellular respiration, specifically at the very end of the electron transport chain (ETC) where electrons are finally transferred to molecular oxygen, the higher the RH of the air, the more resistance there is for more moisture to be added to that environment, and effects the ease with which it does so. But none of that water comes from the pot; it's pulled from the air. If you run high daytime RH, your medium/pot is 100% reliant on transpirational root pull to move water. ZERO evaporation happens across the atmosphere if the tent air has high RH%, the medium cannot release its water through evaporation. Once a canopy develops, light no longer slowly wicks and evaporates from the topsoil. The Soil-Plant-Atmosphere Continuum (SPAC) describes the continuous pathway and process of water movement, driven by a gradient in water potential, from the soil, through the plant's roots, stem, and leaves, and finally evaporating into the atmosphere through transpiration. There is evaporation, there is transpiration, then there is evapotranspiration; Evapotranspiration (ET) is the combined total of two processes: evaporation (water lost directly from soil and surface water into the atmosphere) and transpiration (water released from plants to the atmosphere through their leaves). Evapotranspiration represents the total amount of water that moves from the medium into the air. There is no such thing as a medium with too much water, only a medium that retains too much for too long. The water must always flow efficiently from one atmosphere(Medium) to another(Air) in a timely manner. Moisture is a critical factor for bacterial growth and decay. Dictating how long it's allowed to sit in any one location for any given period is a key preferred control. To ensure a net reduction in a bacterial population, the rate of removal (ET) must exceed the rate of bacterial growth (decay rate), which is often modeled as a growth rate for the specific bacterium under the given conditions. By optimizing daytime VPD, we also optimize conditions for bacterial growth to explode exponentially above 77°F.. If water is allowed to sit in a medium without an escape within a timeframe, nothing good will happen. IF High RH is maintained overnight as well as during the day, placing 100% of water movement at the behest of daytime transpiration, roots can only pull where they can reach, and if soil is compressed above a certain point, moisture will become trapped in a medium with no way of moving day or night. This will begin the countdown for decay to take hold. When water stagnates in a medium, it loses oxygen, creating anaerobic conditions that foster the growth of harmful microorganisms like bacteria and fungi, which can produce toxins and disease vectors. Thigmomorphogenesis, the process by which plants respond to mechanical stimuli like touch by altering their growth and development, resulting in significant morphological changes to improve survival against mechanical perturbations. This complex response involves sensing touch and initiating physiological and genetic responses, leading to changes in form and structure over days or weeks. The process is triggered by physical forces such as wind, rain, or touch. Plants adapt to these stimuli by changing their shape and structure, which may include slower growth, thickened stems, or altered leaf development. Plants possess sophisticated mechanisms to detect even subtle mechanical stimuli and initiate responses. A variety of molecules, including calcium ions, jasmonates, ethylene, and nitric oxide, are involved in signaling these mechanical inputs. Touch can induce the expression of genes that encode proteins for calcium sensing, cell wall modification, and defense mechanisms. A plant exposed to constant wind may become shorter and sturdier. A plant that is touched frequently might grow slower to conserve energy and develop thicker cell walls. These changes increase a plant's resilience and ability to survive in harsh environments. Let's get Thiggy with it.

Day 35. Minor defoliation and supercropped a few branches. Day 37. Starting to flower nicely, some frost Starting to appear on buds. Day 41. Strong smell of strawberry bubblegum when manipulating plant.