I didn't get a wet weight, but will update after it completely dry

3cm vertical growth this week. A few more leaves.

40 days are over 3 Out of 4 Plants are fully in flower 1 is still in veg i guess Its not an autoflower and i have to force it to flower. Removed alot of leafes that blocked light and removed all the bottom leafes

Die Gelato ist jetzt ca in der 13. Woche (eigentlich Automatic). Sie wächst sehr gesund und stark, hat ca 20 Seitentriebe welche zum Teil runtergebunden worden sind. Sie ist jetzt seit ca 1 1/2 Wochen in Vorblüte und ich hoffe das an diesem heißen Wochenende jetzt der Sprung in die volle Blüte gelingt. Ist eine durstige Dame ca 1,5 -2 Liter pro Tag an Wasser. Jeden 2 oder 3 Tag wird gedüngt je nach Bedarf. Die Pflanze steht auf einer Dachterrasse - absolute Hitze manchmal in der Sonne bis zu 49°C. Nachts ist es teilweise auf 15°C abgefallen. Sie bekomm von 7,45Uhr bis 20.00uhr Sonne, vollgas Sonne. Die Pflanze steht in einem 5 Gal Stofftopf von Spiderfarmer. Die meisten Sonnensegel wurden bereits entfernt, diese waren riesig.

👉Dropped Seed into solution of 1:16 H202/ H20. After 48hrs the shell split and the tap root started peeking out. Then placed in black plastic container between two squares of cellulose fiber towel and soaked in the H202/H20 solution. After 24 hours the tap root has grown to 1/4" and was then placed into the media. The plant emerged two days later and is healthy.

So pleased with the growth, this week I put a net up to separate out the buds a bit and trimmed the plants to try and get more light to the lower buds. Instead of replacing the water, I'm now directly recycling and adding nutrients and additives. I found the easiest way was to pump the system out into another bucket so I could measure more accurately how much to add and then replace the mix back in the system. The grow room smells wonderful. I'm so looking forward to when I can try it.

Week 9 - First Week of Flowering 🌸 The dark period has ended, and these ladies came back into the light fully energized and ready for action! It’s just the first week of flower, and they’re all praying, stretching, and absolutely thriving—filling up every inch of the tent. This grow space is officially packed from wall to wall, with each plant competing for its share of light and showing off some of the biggest, healthiest leaves I’ve seen yet! 🌱 A few strategic plucks here and there have kept airflow smooth and light penetration balanced. Those big leaves? They’re a sign of happy, healthy growth. Large leaves help the plant capture maximum light energy, essential during this stage, especially as they start focusing on developing those flowers. When plants grow huge, vibrant leaves like these, it means they’re well-nourished and content in their environment—a true testament to the well-balanced conditions we’ve got going in the tent! Flowering Parameters 🌡️ Room Environment: • Temperature: 26.7°C • Humidity: 63.3% • CO2: 960 ppm • VPD: 1.29 kPa (prime zone for flowering health!) Lighting: • Light Intensity: 835 PPFD (ideal for boosting flower growth) • Solution: pH 5.96, TDS 460 ppm, temp 21.1°C • Medium: Moisture: 100%, TDS: 520 ppm, Temp: 21.6°C Carbon Filter Installation & Smell Management 🌬️🌱 With the transition to flower, the scent profile is already starting to kick in—crazy for the first week, right? 🌸 To keep everything fresh and under wraps, I’ve set up a carbon filter system. Here’s how it’s working: I’ve connected the filter to my Aerofan, which pulls air directly from the tent. This air is cleaned by the filter and released into the main room, where it then passes through another filter before exiting my space. This dual-filter setup means no scent escapes into the wild, keeping things stealthy and the grow room a peaceful, scent-contained environment. Perfect for anyone concerned about keeping their home free from that telltale aroma! 🕶️🌬️ Enhanced Lighting with Emerson Effect 🌞 This week, I’ve introduced an extra 15 minutes of red light at the beginning and end of each light cycle. Why? Well, this red boost taps into the Emerson effect, enhancing photosynthesis efficiency, especially during the flowering stage. By stimulating a little extra wake-up and wind-down light, we’re mimicking the natural sunrise and sunset experience for these plants, which can help reduce flowering time. Not only does it encourage smoother transitions into day and night, but in theory, it’ll help these ladies finish a bit faster, while giving them a little nudge to build more substantial, quality flowers. 🌇 Nutrient Adjustments 🌱 Now that we’re in flower, I’ve swapped out the Start Booster for P-Boost and TopBooster to specifically support flowering needs. Here’s why: • P-Boost brings in additional phosphorus, vital for energy transfer and cell division as the plant channels more resources into budding sites. • TopBooster supports the flowering phase by improving flower quality and density, helping to build those big, aromatic buds we’re after. These changes bring the nutrient mix in line with what’s most beneficial at this stage. All this precise dialing in is easy to manage thanks to the TrolMaster system. From pH to nutrient scheduling, the TrolMaster ecosystem and ThinkGrow LEDs have been the ultimate teammates in this grow journey, giving me real-time data, fine control, and peace of mind. 💯 (Not introducing UV light just yet, but stay tuned as that’s coming soon for an added boost!) Looking Forward 🌟 Next week, we’ll be upping the reds, giving us an even greater chance of activating those flowering signals for a smoother, faster transition through the cycle. I’ll keep tweaking and fine-tuning every parameter to make sure these ladies get exactly what they need to thrive. Big thanks to the TrolMaster system for keeping everything in balance and optimized, along with the supportive Grow Fam following this journey! Your enthusiasm, advice, and support are a huge part of this grow’s success. Keep following for more updates, and stay tuned for what’s next! 🌿✨ P.S. Deep Dive: TrolMaster’s MBS-S8 CO₂ Sensor & Smoke Detector 🚨 The MBS-S8 CO₂ Sensor from TrolMaster is a powerhouse for growers, especially when it comes to optimizing plant growth and efficiency in a controlled environment. This sensor continuously monitors CO₂ levels and integrates directly with the TrolMaster ecosystem, giving you real-time data on CO₂ concentration. Ideal levels of CO₂ can significantly boost growth and yield during certain stages, so understanding and managing CO₂ is key. With the MBS-S8, I can control CO₂ levels precisely, keeping them within the optimal range for photosynthesis. This sensor is a game-changer because it adjusts CO₂ delivery automatically, giving plants exactly what they need without any extra monitoring from me. Meanwhile, TrolMaster’s Smoke Detector is an essential safety device, especially in spaces with electrical equipment, lights, and heat-generating components. This detector can be set up to alert me instantly via the TrolMaster app if any smoke is detected, allowing me to respond immediately to any potential issues. Fires and smoke are rare in controlled grow setups but having this safety measure provides peace of mind and lets me focus on the plants without constant worry. It’s an incredible tool for any grower prioritizing safety and proactive monitoring. Discount Codes so you can save big on your next check out 💚💚💚 Kannabia - DOGDOCTOR 30% off SeedsmanSeeds - DOGDOCTOR 10% off CannaKan- DOGDOCTOR 15% off terpyz.eu - DOCTOR 15% off The Neutralizer - PORKIT5-DOG 15% off As always thank you all for stopping by, for the love and for it all , this journey of mine wold just not be the same without you guys, the love and support is very much appreciated and i fell honored and so joyful with you all in my life 🙏
 With true love comes happiness 💚🙏 Always believe in your self and always do things expecting nothing and with an open heart , be a giver and the universe will give back to you in ways you could not even imagine so 💚 Friendly reminder all you see here is pure research and for educational purposes only Growers Love to you all 💚💚💚

Day 85: The left plant is developing much slower, and I think it is caused by light stress. The right plant needs more light than the left one, so I have lowered the left plant. I don't understand why this grow as been so slow. They had problems through out there grow, but they are growing fine in size, and the left plant has much less noticeable problems. It might have something to do with the big pot size maybe?

Last the buds matured nicely. Quite a sweet, candy grape funky gas terp. The buds are very dense and heavy. Colas are palm sized and I’m happy with the 10% amber. Chopped er down. Buds are crazy dense and hard. 4 plants and I harvested 3 lbs and 11oz’s! not bad. Tastes like candy grape gas/skunk.

En esta actualización se incluyen 2 semanas ya que por trabajo me fue imposible añadir la semana anterior. El día 15 de Agosto recibió la segunda pulverización de Bacillus Thuringiensis para prevenir el ataque de las orugas. Sigo alternando riego de agua un día con riego de Ascophillum Nodosum al día siguiente. He dejado de regar con Cannazym.

I have now trimmed and hung the plant after 9 weeks of flowering

The plans are showing 3 different height the tallest one was the one that I did less training on and the other two I did fairly the same amount of training I believe that one of them it's not growing very fast compared to The other two because they're showing some form of sign of nitrogen deficiency so i will increase the nitrogen for the next week the heights are like this: 30 inch 22 inch 14.25 inch The shortest plant seems to be stretching now a little bit more comparative to two days ago before increasing the feed of nitrogen I don't think I will use this type of soil again just because I don't see the plants responding as well as the time that I use soil with 30% of Coco in it definitely that combination the plans and The Roots seem to thrive very good with it now I'm using soilless Pro mix pH and I'm not too in love with it. Also the plans have a very strong cheese skunk smell not overpowering just really nice. Day 45 today I feed my plants solution a little bit heavy on the nitrogen today in order to try to flush out any build-up salt that could be causing a lockout or simply just i haven't water enough because I don't like pouring too much water on to them to avoid actually run out ( is always a lot of work and very messy). Thank you for reading I will continue to update have a happy grow.

Hi Growmies, So far it all goes to plan. Not much to do on soil I gotta admit. Right now they are receiving RO ph balanced water with some CalMag, rhizotonic and orca. The solution is applied with a spray bottle every time the top layer appears dry. #1 is a bit behind, as she struggled to get out of the seed shell. The other two are pretty much on par in terms of development. Thanks for stopping by and hope to see you next week.

Day 52-64 (Day 54) I’m going to thoroughly inspect each plant and remove bananas if found. So far it’s only been the one on #7 but I don’t want to take a chance. I’m also going to give a watering with some runoff. (Day 55) Can’t find anymore bananas but that one. I will probably find a few bag seeds but who knows. It’s way too late for pollen to really have effect anyway. These 5 plants finish nice and early compared to my other tent flipped on the same day. I would never take this strain 65+ days like last time. I would do 56-60 days next time I flower this strain (Day 58) Holy shit this tent is fading like crazy now. They are starting to show some beautiful autumn colors. #1 #5 and #7 are definitely done. #3 and #6 could use a little more time so I’ve decided to take them down on the 24th. I haven’t seen anymore bananas and the one that popped out on #7 has shriveled up and receded. (Day 63) I’m seeing what look like seed pods starting to form in some of the main colas on my picture perfect pheno. #7 is showing 3 or 4 little bananas too. All of the top buds are definitely done so I’m going to harvest as soon as the lights come on tomorrow. I’m going to give one last watering right now and then harvest. I’ve noticed that harvesting a watered plant will extend the dry time by a few days and that’s exactly what I’m looking for. A nice slow dry. Plants are being full plant hung + dry trimmed and tent is being kept at 60-65 degrees and 60-65% RH. Cutting everything down was a pain in the ass. I had to individually cut each square the scrog net so it wouldn’t contract and squish all the buds. I chopped down my other tent as well so I have no other plants in flower right now.

Looks like she's not gonna have any issue so far,everything goes smoothly,let's see how she develops day by day,Hope you like my work guys! I work with passion and dedication everyday,I love my cannabis and I love to grow this amazing plant!.

😫PRIMO OVERFERT SENZA AVER DATO NULLA ASSURDO...solo acqua e sono cariche scure ora sono palesemente in over... procederò ancora per altri 10 giorni di acqua il topping a funzionato bene da come si vede nel video ora faro riposare per 15 giorni e poi lancio in flow 14/05/2021 la jungla sembra crescere ora dovrò fare un pò di pulizia defogliare dalle foglie piu grandi e lollipoppare per bene.... sono solo un pauroso di togliere le foglie grandi (foglie primarie) al momento zero fertilizzanti ancora troppo scure 18/05/2021 la sera del 18 a un giorno da un mese di vegetazione in growbox ho lollipoppato e potato i rami i inutili.... ho dovuto anche fare una rotazione di piante in quanto non sono uniformi nel crescere.... ho riempito il bidone da 30 litri e mi sono accorto che le baby ora bevono molto pur troppo sono ancora in forte stress e overfert non capisco da cosa provenga in quanto non ho usato nei fertillizzzante.... vedremo oggi 21 come staranno ora posto le foto del 19 maggio giorno in cui fanno un mese e sono ancora 40cm aime qualcosa sta rallentando la crescita e arrivato il filtro a carboni e pesessantissimo speriamo che la mia box lo regge