Week 2 Veg phase Day 8 Veg phase This morning the leaves where twisting not sure in the beginning what was happening. pH is 6.5 my humidity in the tent in around 63 to 69 % . And i have the marshydro 1000 on 70% . At distance off 40cm from the plants . I will wait and see. Day 9 Veg phase Have bin letting the soil dry up . And today start giving them 2ml per liter In a 5 liter sprayerbottle and added the following nutrients 4Liter Filtered water with pH of 6.5 8ml of the nutrients below : Advanced Nutrients pH Perfect Bloom Advanced Nutrients pH Perfect grow Advanced Nutrients pH Perfect micro Advanced Nutrients B-52 Advanced Nutrients Voodoo Juice Advanced Nutrients Rhino Skin Day 10 Veg phase Everything looking good besides the waving leaves . 3 part of leaves are slowly coming out 👍. Giving them around 0.3 L per plant per 24 hours Day 11 Veg Phase They are growing very nicely in good tempo . Going to be Adding some Biobizz calmag 1ML per 1Liter in the mix today Day 12 Veg Phase Everything going good nothing to tell 😎😎 Day 13 Veg Phase The New leaves are coming out nicely Day 14 Veg Phase It was a perfect week for the 2 Cookies Gelato on to week 3 of Veg 👌👌

Videos: 10 días despertando , transplante 12 días , algunos sistemas radiculares y despertando post transplante . 🌱Solución de riego a micorrizas : Mycochum y luego riego completo cuando despierten . Ocupamos granular y great white en polvo para transplante , mitad y mitad. Ph: 6,0 Ec: 0,7 🌱Solución riego a foleo 1 hora antes que despierten : 1 litro : proactive 5,0 ml y knactive 2 ml. Ec : 0,5 Ph: 6,0 🌱Sumamos alfalfa alrededor de los tréboles 👑Actualización Jardin 18-19 días . ⌛️Videos : 🎥18 días , con hambre y sueño. 🎥19 días antes de dormir 🎥19 días despertando post foleo y post preventivo de tierra de diatomeas , listas para transplante en 1 semana . 🌱Solución foleo 2 litros : knactive + proactive (4,0 ml ) y ( 0,8 de proactive ( melazas , quitina , etc ) Y sumamos preventivo después que se secó el foleo. Ec : 0,4 Ph: 6,1 🌱metimos amarres al central y full lst .

Starting to keep a close eye on the Trichomes. Still clear some cloudy. Stopped feeding, Starting to flush. It’s starting to smell amazing in here.

El sabado 7 arranca una nueva semana de vegetativo, las plantas crecen con vigor, la Ztrawberry esta mas bajita que las Full Gas. Se esta regando solo con 2 litros de agua con ph 6.3 dia por medio solamente para mantener la humedad. 10/9 Se aplica poda apical a todas las puntas y se retiran hojas que tapen la luz.

Last run of the growing season. Biscotti Mintz by Barney's Farm. I wasn't satisfied with the last crop's yield so i wanted another crack at it. This time I'm armed with a digital Lux meter so i can better dial in the light without the guesswork. Looking to start the clones off with between 5000 and 7000 LUX at the canopy. But i didn't like the brightness at 8000 so i upped it to 15,000 Lux. I think the 5k to 8k Lux recommendations for clones was for clones in the process of rooting. Recommended Lux values for vegging plants is between 15,000 and 50,000 Lux. They were very lanky with long internodal spacing which I thought might be insufficient lighting. Because the other Biscotti Mintz grows and research i've done, shows a very bushy indica trait growth pattern. So either i have a shitty pheno, or my lighting wasn't good enough. I'm guessing it was the light because preliminary testing with the Lux meter showed that my canopy was quite under lit last run. Again using 3 gallon pots, this time i am crossing my fingers with the substrate because it is reused coco that i washed and buffered myself. I've never done this before so i have no idea what's going to happen. For all i know they will all be dead in a few days lol. Anyways, i tested the coco pH last night, and after buffering with 2x strength calmag and soaking the coco in a 6.0 pH for 48 hours, the pH is sitting around 6.8 in the coco. Not where I wanted it, but it's doable. I believe the coco brand new out of the bag measures at 6.8 so... I will be watering in 6.0 pH to try to achieve a balance. Treating the roots before planting with Azos and dusting the planting hole with Mykos. The nutrient solution is very mild to start off. About 450ppm. Hygrozyme will be added to the mix and watered in to help break down the old dead root matter that wasn't able to be sifted out of the coco. The cellulase will break those roots down into usable food for the plant to uptake, and clean up the dead roots at the same time. Hygroben will also be added because i have some left from the last crop. And after seeing the results of using bacteria, i'm pretty sold on using it. Today is March 4th, 2024. I like to start on the first of the month but i like starting on Monday's better for keeping my weed soaked brain organized a little easier. I'm thinking to do half strength doses 2x per week instead of full doses 1x per week. It's twice the mixing, but that's ok. There will be 7 plants in total, and the experiment i am running this time, for anyone that wants to check out, is 1 of the plants i will do a seriously severe defoliation on while leaving the rest untouched. And we'll see how it plays out yield wise. I'm sure of the outcome already, but I'm tired of the babbling dummies all over the place that preach fan leaves fan leaves... So we shall see! I had the pH of the nutrient solution set to 6.0 but after adding the enzyme and liquid bacteria, the pH dropped to 5.78, so beware of that if you use those products, even though they claim not to affect the pH. The light dimmer is set to 6 of 10. The clip fan is set to 2 of 10. Temps set to 74F and humidity set to 70% humidity. The light is 18 inches from the canopy at a dimmer setting of 6, which gives the canopy 15,000 Lux. Each plant was gently watered with about 300ml of nutrient solution, which was carefully and gently dispensed with a 140CC syringe Hope they like what i've done with the place lol. P.S. I realized that the 5000 to 7000 Lux was for clones that are rooting. So I had the lux at 12,000 at 18 inches from the plants at a dimmer value of 5. I've now upped the dimmer to 6. Tomorrow i'll check the lux and see where it's at. The clones have just come out of the dome today so i don't want to push them too aggressively too fast. MARCH 5, 2024 I just tested the Par light reading on BM #1 and the BM right in the center. BM #1 Par reading is 247. Center plant is 270. Light dimmer is at 6 and light is now 13 inches from plant canopy. MARCH 9, 2024 Fed again today. There is some progress in growth. 1/2 inch increase. The clones have been upset getting adjusted to their new environment. I've upped the dimmer to 7 and the PPFD and DLI numbers are good. Humidity remains set at 70% and temperature is set to trigger the fan at 78F Light remains where it was so the plants have grown 1/2 so the light will be 12 inches above the canopy. Mixed up 2 liters of nutrients and the ppm was 555, and the pH was adjusted to 6.15. 2ml Per liter of hygrozyme and hygroben were also added. Clones have curled leaves and a perky/droopy stature. The leaf edges are browning a little bit. I'm not sure whats happening with them other than it's just the effects of transplanting and drastic environmental change. What i'm wondering is how they will/are reacting to the used coco underneath? We press on with fingers crossed! 🙏😁

Now that I see how these girls turned out it was probably a blessing I had some herms to cut out because there would’ve been no room. Especially in the pc/ssh tent because Pcrit and Sundae Driver were looking to be the biggest plants before I found balls and cut them down. The humidity has been surprisingly high but we’ve had warmer, wet weather for this time of year. I’m not sure I would’ve been able to keep it down with a tent packed wall to wall. I’m just thankful for how everything has worked out. If I ever do two plants per earthbound again I’ll make sure to veg for less time. I’m hoping to give these girls another week but the weather once again is going to be warm and wet so I will probably need to cut them down

The ladies gain a good size Elizabeth look ready to enter flowering This strain grow really fast😲 from now I try to push them with 24h light on😈 let's see if both start flowering this week👌 -------------------------- UPDATE DAY 25: (finally i've a decent camera so you'll see better pics from now) Got some trubble yesterday morning, Elizabeth started silcing from the topped part 😟 (probably due to excessive lst). Luckly she didn't even noticed it 😅 (i've fix it as soon as i found it out), she continue her road on flowering. While Irene probably will start in next 2-3 days. So next week we should start with flowering. P.s. already started developing a very nice smell👌 next week i'll probably start a time-lapse for flowering

DAY 6 WEEK 2 - FLOWER Hello fellow growers, I'm thrilled to report that my current grow is progressing smoothly as I enter Week 2 Day 6. The plant is showing promising signs of healthy growth with no apparent deficiencies detected thus far. However, I've encountered some peculiar symptoms with the leaves; it seems like there's some tissue tearing or ripping occurring. Despite thorough inspections, I'm confident in stating that pests are not the culprit, as I haven't observed any other signs they typically leave behind. It's a bit perplexing, but I'm keeping a close eye on it. One aspect I've been experimenting with in this grow is the use of an ExHale CO2 bag. While I had hoped for a noticeable increase in CO2 levels, I haven't seen a significant improvement. After careful consideration, I suspect that the lack of a sealed environment is hindering its effectiveness. Humidity issues prevent me from sealing the environment completely, which likely results in the CO2 being dispersed rapidly. For now, I've decided to forgo using the CO2 bags, but I'm open to revisiting them in the future if I can establish a sealed environment. Looking ahead to the start of Week 3 of the flowering stage, I plan to introduce PK boost additives to enhance potassium intake. This strategic addition aims to support robust flower development and overall yield. Despite the minor setbacks, I remain absolutely thrilled with the progress of this run. With approximately five more weeks to go, I'm eagerly anticipating the taste and aroma of the final product. I appreciate all the support and encouragement from fellow growers. Here's to continued success and growth! Let's Grow!

Common soon

💩Alrighty then Growmies We Are Back At it 💩 Well folks we just finished up the last run and so we are bad to do it all over again 😁 So what do you say we have some fun 👈 We got some Z & Z 🚗 🚘 🚗 🚘 👉 From Exotic Seeds Well we are just 42 days and folks shes doing pretty good 👌 It's been a crazy few weeks 👉and so I had to get creative and then i has some uptake issues over the last weekend 👈 So I gave them a light flush and then switched to there new brand of nutrients and began there new regiments 👌Just need to remind myself to take it easy 🤔 FC4800 from MarsHydro Lights being readjusted and chart updated .........👍I've added a UR45 to the mix👈 www.marshydro.ca 👉I am using Agrogardens for nutrients for my grows and welcome anyone to give them a try .👈 👉 www.agrogardens.com 👈 Agrogardens Cal MAG Agrogardens Grow A+B Agrogardens Bloom A+B Agrogardens Bud Booster Agrogardens PK13/14 I GOT MULTIPLE DIARIES ON THE GO 😱 please check them out 😎 👉THANKS FOR TAKING THE TIME TO GO OVER MY DIARIES 👈 Would you like to hang with the growdiary community 👉 https://discord.gg/gr4cHGDpdb 👈

Had to come Down early due to poor weather and rot . Wish I got the full flowering cycle but a lot of weed and good smoke. F***ing monster !!! Cured for 3 months

previously, all my seedlings have almost stretched. this time i put the cm led lights 2 inches away from the seedling, and it seems to have induced self-fimming and divided into 5 or more branches. despite looking at many timelapse videos of germinating seedlings, i have not seen behavior similar to that of my little girl. besides that, it was a pretty uneventful week. i mixed and changed nutrients once testing the doser - still feeding at 1ec, pH 5.9. I had one leak, i think the hpa nozzle was shooting water from the side as i was not sitting correctly on the grommet - i must figure a way around this. i did not build the garden master controller yet with high-pressure sensors, hopefully soon.

A really hot week last week, The lamp doesn’t make it any easier but steady at 28 degrees now. OG auto in its final days I think, leaves are starting to turn yellow so I’ve started a flush, it’s a beautiful plant, 80% of the plant is covered in bud, I’ll post some good pics before harvest. Not gonna be a crazy yield but for the size of the plant really decent. The feminized OG are all exploding with bud sites, amazing how fast it’s going the smell is getting better by the day Gorillas are cute! Flowering a little slower but a lot bushier and the leaves are sooooo pretty! Started to give more water and upping the dosage of nutes since I’ve not seen any signs of over feeding might as well try it out Okloveyoubye ❤️

This was my first ever grow and I am extremely proud of it. The nugs are dense and smell fantastic. The phenotypes on each of my plants were very unique, and each has its own smell. This did make it a little harder to care for the plants, but it ended up working out fine. I opted for a dry trim and did a tight manicure on the nugs. I plan on turning the trim into cannabutter using a sous vide machine.

Noticing more leaves coming in.

7/22 day 43 7/29 end of this week all plants are super healthy.