Genética muy estable, floración rápida, hermoso color y bastante generosa 💚❤️

Will harvet her in 1-2 weeks. Just strait water

For the first time, I tried working with enzymes in the irrigation water. These are supposed to break down dead roots and plant material in the soil and make it available to the plant as food. I'm curious to see how it goes. After the first three weeks of light changeover the flower transformation is done. Now it is the right time for defoliation and lollopoping. In case cherry high lollipopping wasn’t necessary I only removed one or two popcorn buds and a few leaves. Light Power: 100% Day 72 Flower day 29 Photoshooting Defoliaton

Note : + jegliches Zubehör wird in der GermniationsWoche aufgelistet . Zeitraffer Videos folgen immer nachträglich. + videos werden so geschnitten das nur ein geschlossenes Zelt erscheint , ergo Fehlen paar reale Minuten (ca 1 Std) . ++ nur probleme mit der Zeitrafferkamera . Sorry für die Schrägen und halben Aufnahmen . Vielleicht schaff ich beim nächsten Grow da abhilfe zu leisten. Day 50: Wachstumstillstand bei 68cm . Day 51: + Höhe : 68cm + 2 Liter Flaschenwasser + + Dünger für Blühte + + + Canna Terrar Flores (Achtung wirkt wie PH-) + + + Canna Boost + + + Cannazym + + + Greenhouse Feeding BioEnhancer als PH+ Day 52: Kleine Entlaubung . Test MAX Licht : Main-Cola PPFD 1000 (16h) , sekundär Colas PPFD 750 (16h). Das wird mächtige Mangelerscheinungen geben . LED und Cal-Mag Probleme sind ja ein Standard Problem :)) Schauen wir mal was passiert bei so einer Autoflower. Day 53: + Höhe : 68cm + 1.5 Liter Flaschenwasser + + Dünger für Blühte + + + Canna Terrar Flores (Achtung wirkt wie PH-) + + + Canna Boost + + + Cannazym + + + Canna PH+ + + PH 5.81 Wegen Wetter Test verschiebung um ein paar Tage . Es wird hier einfach zu heiss im Zelt. Day 54: Weltuntergangsstimmung für meine Zoe . Dank des Super Wetters hab ich hier 77%-80% Luftfeuchtigkeit (draussen ist es noch höher ) und es wird auch noch warm . Ergo, schon gestern hat meine Pflanze extreme Probleme mit der Wurzeltemperatur bekommen und hat die Blätter hängen lassen . Ich hab das Licht runtergeschraubt und Abluft extrem erhöht. Ventilation direkt in die Pflanze sonst gibts Schimmel . Aber hilft halt nicht wirklich . Luftentfeuchter läuft auf Dauerschaltung und produziert dann auch noch Wärme, die ich überhaupt nicht gebrauchen kann bei den Temperaturen draussen lol. Ein Teufelskreis :(((((( Day 55: + 1.75 Liter Flaschenwasser + + Dünger für Blühte + + + Canna Terrar Flores (Achtung wirkt wie PH-) + + + Canna Boost + + + Cannazym + + + Canna PH+ + + PH 5.88 Draussen sind 31 Grad , ich hab den ganzen Growroom + Vorraum (meine Wohnung ) über Nacht runtergekühlt so weit es ging (23°C und 22°C). Das Licht noch weiter reduziert dafür näher an die Planze gemacht. Das ist wirklich das mindeste was noch geht. Liegt ca bei PPFD 600 an der Spitze . Wenigstens ist hier die Luftfeuchtigkeit im Rahmen , zwar immer noch zuviel (67% im Zelt) aber besser so als das hier die Hitze in die Höhe schießt . Nach 12h Licht (19:00 Uhr) wird dann wieder aufgedreht und die letzen Stunden mit mehr intensität nachgeholt was nachzuholen geht , denn dann gehen hier erst wieder die Temperaturen runter . Day 56: Läuft wie gestern ab 19:00 wurde das Licht aufgedreht und DLI nachgeholt .

Welcome to week 3 Day 16 after last night Im not going to post any pics tonight lets see what tomorrow looks like when they had a chance to suck up those nutes. One thing I did do is I added a cal/mag foliar spray I has a cal maG ISSUE on my older plants so I figured a little cal/mag on the leaves wont hurt anything (if you don't overdo it, as i LOOK BACK sry caps button locks, one thinbg that really plagues me is it seems during than of going into the stretch I seem to always have issue with a defienecy My week 7-plant from another current grow grow I waited to long to add cal/mag and lost a lot of leaves and it is hurting my buds But I have a Gorilla glue and a Gelato right next to each other the gorilla glue never had a issue while the gelato did strains do differ Like I learned last week gorilla glue has issues with phosphorus at the last half of flowering so I had to cut back on Bud enhancers and the black Lebanon I'm growing next is good in high temps and low humidity so remember so straiN IS THE SAME so research before you get seeds and grow what you are prepared for I rambled enough tonight to make up for pics Day 18 climbing for the net found out there are Name issues Gozilla cookies are supossed to be God Strain and Girl scout cookies But Herbie's strain is Gorilla glue#4 and Girl Scout cookie which by most other breeders is Gorilla Cookies. so the lesson here is always to check your Genetics. I am really concerned that many breeders and wanna-be breeders are going to do to Cannabis what dog Breeders did to pit bulls a lot of damage has been done to the pit bull breed due to overbreeding, inbreeding and cross-breeding Unless you spend a lot of money you dont know what you are getting I believe this will be the case with cannabis seeds

420 Fastbuds Week 5 Cherry Cola Auto What up grow fam. Weekly update on these girls starting week 2 of the flower cycle. So far all has been OK with keeping up the same routine. One of the plants I will say is an absolute mutant for some reason. Just not responding to anything I've done to try and help it out. I'll keep up with what all the other plants get because they seem healthy and happy. The other plant is doing well growing and producing preflowers. All in all Happy Growing

Filling out beautifully. That stack is amazing. Getting so frosty. Sweet smelling. The buds are so solid

I lost a little bit the count on this autoflowers, amazing 3 automatic plants, super powerful genetic, they ended up stinking very loud and the flowrs are just amazing, I'll show the flowers once they're dried! Grown 100% organically with FLO (living soil blend) and water 💦, hope you guys enjoy

7/18/25 chopped and hung. Will update more with smoke reports and final weight 7/20/25 been keeping it roughly around 60% Been keeping it on the lower end cuz of the size of the buds

Smooth week. This is a beast of a strain, wile o have two on the pot, since i germinated two seeds, i have planted both, but the two are beautiful i cannot kill one and choose… i have always wanted to plant this strain, I’m very happy i did! It is growing beautifully. I’m using velokelp from Remo and Nature’s candy i had laying around. That is compatible with living soil, and Moringa extract once a week. And have planted some companion plants as a soil cover. The Fastberry is in a super soil, next time all will be in a super soil… So easy, top up with some good bacterial / fungae , humic fulvic, seaweed and it is all good. Or straight water! Very minimal.

Essendo l'erba da portarmi in ferie e poi avrei staccato tutto... Queste 2 piante si sono prese la piena potenza delle lampade e son venute molto bene!! Sono molto soddisfatto del risultato!!! Mi spiace di non aver messo le foto dall'inizio perché è stato veramente un bel crescendo!!

So this week flushing began. Flushed with water pH 6.0 EC 0.1, I won't harvest the plants untill the run off EC is the same as the Input EC. Temps also brought down to preserve Terps as much as possible. Serious smell coming from both strains, Buds are somehow getting even frostier. Can not wait to harvest these two strains!

Please leave any advise please

Here we are at the end of my plant's wonderful eleventh week of flowering, another week full of exciting developments and new discoveries. The constant and unstoppable growth of the plant has come to an end, showing a beauty and vitality that are a true spectacle for the eyes. 😎 The abundant layer of resin that has formed is a clear sign of the health and well-being of the plant, once again confirming the benefits of the premium nutrients used throughout the entire growth cycle. TrollMaster's "TENT-X" environmental control system continues to prove its worth, precisely maintaining optimal temperature and humidity levels to promote vigorous plant growth. The combination of advanced and precision technologies ensures that plants can thrive in a controlled and conducive environment😎 I am thrilled to share with you the latest video showing the temperature, humidity and VPD trends of this last week of flowering, providing further demonstration of the extraordinary performance of the TrollMaster control system and its synergy with the other elements of the grow room. With each week that passes, the anticipation for the new discoveries and challenges that await us continues to grow. With the constant support of Plagron nutrients, trust in the TrollMaster control system and the excellence of MEDIC GROW LED lighting, I am sure that I am always ready to face any challenge! Thank you again for being by my side in this extraordinary adventure, dedicated to exploring the wonders of plant cultivation. Together we continue to look to the future with confidence and enthusiastically anticipate the successes that each new week holds for us. 💪👽🌱✨ REVIEW TENT-X: I was pleasantly surprised by the effectiveness and functionality of the TROL MASTER! This device is simply amazing, as it has allowed me to monitor the environments I use it in accurately and efficiently. One of the most impressive features of this device is its ability to operate LED lights easily and intuitively. Thanks to its user-friendly interface, I could easily customize the lighting of my rooms according to my tastes and different situations. I particularly appreciated the possibility of programming the sunrise/sunset simulation, thus creating a more natural situation. But that's not all: the device goes further and manages to keep me constantly informed about the humidity and temperature of the surrounding environment. This feature has proven to be very useful, especially in times when I am not present. I was able to set humidity limits, so that the device would immediately alert me if the levels exceeded the desired threshold. This allowed me to intervene promptly and avoid excessive oscillations. The accuracy of the temperature measurements was another welcome surprise. The device is equipped with a high precision sensor that allows me to constantly monitor the temperature of the rooms. Here too I was able to set temperature limits, allowing me to be notified immediately if they were exceeded. Overall, I was really satisfied. The TENT-X exceeded all my expectations. Its ease of use, precision of measurements and possibility of customization make it an indispensable tool for those seeking to monitor and optimize environmental conditions.

Gute letze Woche. Ich bin mit dem Ergebnis im großen und ganzen sehr zufrieden. Ich habe einiges für zukünftige grows gelernt. In Zukunft werde ich mich auf weniger Triebe und einen sauberen unteren Bereich konzentrieren. Dann könnte ich sie eventuell auch noch ein paar Tage länger stehen lassen.

Always R.O Water Watering the plant 3 times for per week 1st Watering with nutriens. (750 ppm) (13.03.2023) 4 liter 2st Watering with nutriens. (750 ppm) (16.03.2023) 3 liter 3st Watering with only R.O water & CalMag. (300 ppm) 4 liter 1000 PPFD

So hey guys update just did a feeding last night then made the video update im really happy with the vigor and growth of this grow, hopefully i can finish out the grow in the next 4 or 5 weeks lets keep it going guys thank!!!! FOOOPPPP!!!!!!!!!!!! This stuff is amazing!!!!!! REAALLLY THOUGHH!!!! LETS GROWWWWWWW!!!!

Was hoping to have them all ready for the chop in under 90 day but starting to look like just 2 of them 🤔

Hello everyone 😊 Week 22 = harvest week. Just cut the plant and she's hung up to dry. The plan was to keep the plant whole but I decided, due to my injured elbow, it would be smarter to just use separate branches. More lightweight buds to move around haha. I also splitted the stem in the final 5 days. Don't know if it will have some effect. I didn't wanted to take the risk for longer since I don't have a microscope. She flowered for 10,5 weeks so I guess she was done. I cut away al the leaves that had brown or crispy leaves/tips. The other ones I left. Also maximum branch lengths to slow down the drying process. Last year the buds were dry too quick. I hope to leave them hanging for 10 to 14 days now with a more controlled process . It's the first time im trying this technique. I will keep the airflow on point to avoid bad conditions. The room temperature is around 18° Celsius I guess. Average room humidity. I inspected the buds well and I think this is a good year 😊 no mold, lots of brown pistils and pretty compact. I flushed for 3 weeks so no chance on bad taste I guess. One minor thing : still some popcornbuds. Discovered them a bit too late after I already removed some others a few weeks prior. Minor mistake. The Harvest report will follow during November. Gonna let them dry well before testing. Thx to everyone who followed along with this round. I had some good advice and I learned a lot of good stuff. See u in 4 weeks for smoke report. Adios😉