Processing
Likes
Comments
Share
@Valedor
Follow
semana de crecimiento de tricomas, ademas las flores presentan un crecimiento muy bueno, ya están madurando de verdad, el próximo cultivo lo documentaré con fotos mas claras, he aprendido mucho de tenerlas en hidroponia, me gusta y lo voy a seguir usando y explotando
Likes
22
Share
@Slobasian
Follow
You walk into the back yard and it’s a straight face punch of smells. Looking like some indoor rn moved all plants to safer place in case storm hits so now I atleast have a wind break
Likes
27
Share
@phobic94
Follow
De plantjes staan nu al een paar dagen in bloei. Ik heb ze paar dagen alleen maar water gegeven omdat ze wat donker van kleur waren nu geef ik weer voeding. Heb net mijn netje geplaatst en binnen paar dagen schakel ik over naar bloeivoeding.
Likes
22
Share
@OldEnt
Follow
I'm getting impatient now. Gave her a light P burn with a extra feed of PK at the end of last week and have dropped Boost entirely. Fade came on faster than expected but I think that's the Boost making her hungry, leaving no doubt in my mind it's a PGR. Dammit. Two more weeks??
Likes
2
Share
@TTerpz
Follow
Start of week 13 (Day 49 of flower) 9/20/25
Likes
Comments
Share
@Dirizhor
Follow
Week 13. Looks good, smells good, doesn't strech, just getting fatter, ... the fatter the better) Trichoms on some leaves are getting ember already. That's a surprize, as I initially expected it to flower 9-10 weeks, and so far she is through 5 weeks of floweri ng. Anyways, not foing to rush so far, I believe there's more potential in it. Waterring /feeding is the same, 1 liter every 2 days with 5ml of plagron flowering smthn) Thank you for checking!
Likes
10
Share
This grow will be a very humbling experience being this is my first full grow from seedling to harvest and figured I would bring others along for this journey with me, hopefully some of you viewers may even have insight to any future problems I should have or run into. I appreciate your support and well wishes 🙏. Good luck to you and your grows. Can't wait for the first topping and to start L.S.T.
Likes
52
Share
@MeaCulpa
Follow
The first thing I did was disinfect everything and put it in the shower. Then I calmly rewired the tent and filled the pots. 20% clay balls at the bottom as drainage. On top 50% Biobizz All- and 50% Biobizz Lightmix. I mixed the whole thing well beforehand. 3 seeds came out great, one is currently fighting through and I don't think anything will happen to the last. I planted them all today. Let's see if the last one can still make it.
Likes
62
Share
@Reyden
Follow
🔸Davvero una grande notizia! Una nuova collaborazione con @Spiderfarmer è iniziata e sono felice di poter creare dei contenuti per una azienda seria come la loro!!! Questa mattina è stata montata questa bellissima #SF2000 nella tenda da coltivazione più grande dove dovrà lavorare per far fiorire tutte le signorine che passeranno di qui prossimamente 😁😎🔥 Voglio fare i complimenti perché siete riusciti a creare veramente una luce bellissima con materiali super leggeri ed esteticamente geniali ❤️‍🔥oltre che consumare veramente poco (2.7 Umol/J)per il raggio di copertura ( 4x3 in crescita )(4x2 in fioritura ) e intensità uniforme in PPFD Mi piace molto anche il fatto che monta anche diodi IR utili per accelerare la fase di fioritura e aumentare la resa 💡 Ci saranno diversi aggiornamenti rimanete connessi e grazie ancora per essere passati a trovarmi 😃 https://www.instagram.com/reel/Cl_EEAbu_vQ/?igshid=YmMyMTA2M2Y= Funzionalità principali 2022 NUOVA VERSIONE COSTI DI ESERCIZIO INFERIORI E RENDIMENTI DI QUALITÀ SUPERIORE: Le luci progressive a LED SPIDER FARMER SF2000 utilizzano la più recente tecnologia LED ad alto rendimento oggi: diodi Samsung LM301B, alta efficienza energetica con 2,7 umol/J, creano la migliore penetrazione della luce del baldacchino. Copertura vegetale 3 x 4 piedi, fiore 2 x 4 piedi. Potenza estremamente elevata ma consuma solo 200 W di elettricità, rendendola più efficiente delle tradizionali lampade HID e di altre lampade per piante sul mercato. NUOVO DISPOSIZIONE DEI DIODI E DESIGN DIMMERANTE: Luci crescenti SF2000 aggiornate. Più perline leggere ai bordi, meno al centro. Aiuta a ottenere una PPFD più uniforme. e la manopola di regolazione della luminosità regola liberamente l'intensità della luce. Connessione multi-luce con regolazione unificata particolarmente vantaggiosa per un'ampia area di coltivazione indoor e piantagione commerciale. IDEALE PER TUTTE LE FASI DI CRESCITA: Eccellente spettro completo: bianco, blu, rosso e IR (3000K, 5000K, 660nm e IR 760nm). Diodi 3000K che forniscono più luce rossastra e 5000K che forniscono più luce bluastra. La luce rossa e IR da 660 nm è particolarmente utile durante la fioritura, dove accelera i tempi di fioritura e aumenta i raccolti. Trasforma i tuoi semi nella tua scorta. E la luce sembra abbastanza naturale, quindi è utile per monitorare accuratamente la salute delle piante. COSTRUZIONE BEN FATTA E SOLIDA: nessuna ventola senza rumore. Il driver ad alta efficienza, affidabile e staccabile ha un'ottima dissipazione del calore. Il dissipatore di calore in alluminio è spesso e robusto, coperture protettive per i cavi; Imballaggio intuitivo. Componenti di qualità significano che la luce dura più a lungo, SF Light si prende cura di te con un design più attento, puoi facilmente risparmiare denaro senza acquistare frequentemente luci. In qualità di produttore professionale di luci di coltivazione a LED da oltre 10 anni. Spider Farmer ha sempre insistito per creare attrezzature per la semina domestica più efficienti, adatte e di alta qualità per la crescita delle piante e si impegna a diventare un partner fidato per ogni coltivatore! Riceverai una lampada da coltivazione Spider Farmer SF2000, un manuale di istruzioni, un paio di ganci d'argento, un paio di ganci neri.
Likes
3
Share
Aún no aparecen las raíces por el fondo de la maceta. Seguimos con el propagador.
Likes
24
Share
Another great week for the Apple Betty girls. I have not seen a single deficiency, other than the odd yellowed or withered leaf under the canopy, typically due to lack of light. I will come through soon and do a defoliation of both tents to allow for more light to penetrate, and perhaps get a good push for some girthy colas 😋. I have lowered the temps a bit in the tents by controlling my lung room temps, and they are maxing out at 77 degrees and hitting a night time cool of about 70. I have also lowered the humidity to hover between 47 and 52 %. Hopefully will start to get some nice colours as they finish. As I mentioned before, when I water is when I like to get under the canopy and check the stems and leaves for anything that shouldn’t be… and typically once a week after watering I’ll wipe down the tent and sanitize any surface I can. There is no reason to get lazy, that’s how you get Pests, Mold, and PM. Happy Gardening 🇨🇦👊❤️
Likes
45
Share
~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_ ❤️💡🌱😽💨 We're back from vacation!! These did great on autopilot, of the 6 plants, these 2 are definitely my favorite.. a simple 4way LST when all tops come in level makes me happy 😻. they're still a little too dark/overfed so we're going super light for a while.. We raised the Solux350 a few inches as well, they're stretching fast... all other plants were showing early signs of cal-mag def so we adjusted strengths for everyone.. We have the Solux350 at 75% power, we'll keep it here until their flowering stretch is over and finish out at 100%...I'm really curious to see if resin production using 2835pro/Osram combo is comparable to what 301b/Osram does.. We have another 300watt using these diodes and that tent is a frost factory lmao..not too much else to report, it was nice not returning home to dead plants lol..thanks as always for dropping by and happy harvests everyone!! 🤘😼❤️🌱 ⚡Hortibloom/Solux 350⚡ Specifications ⚙️: Diodes: Samsung LM281 Pro / Osram DR (1,440 total)💡 Driver: Inventronics 350 watt🔌 PPF: 1015 μmol/s ☢️ PPE: 2.9 µmol/j 〰️〰️ Lifespan: 50k+ hrs ⌛ Weight: 14.3lbs lbs (6.5kg) Veg Coverage: 5 x 5 ft 🌱 Flowering Coverage: 4 x 4 ft 🌼 -Uses an aluminum heatsink (no fan), quiet while operating 👂⬇️ -IP65 waterproof ratings, tolerant to high humidity grow environments 💦 -May be daisy-chained via RJ14 and managed from a single controller 💡~💡~💡~💡~💡 🌎 https://hortibloom.com/products/solux-350-led-grow-light ~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_
Processing
Likes
8
Share
Added the other two bag seeds in this week. They aren’t stretching quite yet. Pineapple Express is stretching like crazy and is now the tallest plant in the tent. Put the ScrOG net in to help control the grow... I have five plants in the flowering tent and the tent is only 2x4... defoliated each plant this week... lets see how this grows 😅
Likes
8
Share
Week 3 and a repot is done and now in day 3. Finally it’s settling down after the repot, which was not pretty at all😂 Hope to get some massive plants this run 🌱 ________________________________________________________________________________________ Light from @MedicGrowLED 😎 NEO 780 LED🔥 780 Watt⚡️💥 PPF of 2184 μmol/s & 2.8 μmol/J🔥 Full Spectrum V1/F1 🌈 WiFi smart connection & Smart Aura Control 😱
Likes
35
Share
Haters hate hate raters rate don’t hate the player hate the game bitches
Likes
53
Share
Welcome to my 1st DWC diary. Drop a like if you'd like me to visit your diary. Either way thanks for dropping by. 🍻 Super lemon Haze, was actually meant to be Super Lemon Haze Auto. The seed bank sent me these instead by mistake. Was asked to send them them back but decided to go ahead and keep these. I'm going to run these on a full Terra Power line up. I'm a bit concerned about root rot and bad bactria and all but I have nutrients to counteract this and break down dying roots. I feel obligated to run a full DWC enzyme grow as I have all these great nutes and 2 Sep buckets. So I'm gonna run this as a enzyme living grow and the other is a toss up for enzymes. This plant is 80-100cm so I think mainlining this 1 will be the way to go, or not, I'll be mainlining the soil/coco SLH so maybe I'll leave this 1 to be a massive bush not lollipop needing to be done I reckon. Looking forward to getting this going. Gonna read through all my nutrients and pick the best enzymes and make sure I do it right. Will be starting her on a light diet as soon as she shows some leafs. Very small amount like 3-500ppm. 1/5/22 VD1 she has popped and was started on a light mix. I just added some distilled water to my mix for my soil terra power grows and added 1/3 extra water. No need to PH it. By adding mystical green it stabilizes PH and when water gets taken up it should still hold your set PH from start to beginning. This is something every1 needs to get that uses DWC or get something similar that helps keep PH in set level in 15L or a wk later in 5L. The PH should still be the same. In other nutrients this isn't the case. When the water is taken with the nutrients the stabilizer is left behind to keep the PH stable but this all depends on you keeping your water level and nutrient level up as it goes down while your plants eat. That's why ppl get massive PH/EC swings when your The 3 Nutrients above were just for seedlings. They were left in the rockwool as they would have been left in the soil. They aren't been used since she showed face today. 2/5/22 5x bigger than yday. Looking small on top, she's growing a little to fast by the looks of it. (Not enough energy on the surface to support root growth) she only came out of the shell yday was about .3cm out of the rockwool. Bout 1.5cm now. 4/5/22 Decided to put her on the root stim La Calavera. Aka Voodoo juice. I found a chart saying I should be giving it. 6/5/22 So, it's begun. I've created a negative pressure environment, 1st time, let's see if it makes an impact. On wk 3 onwards I'll be running the intake extraction for 5mins every 30mins and I'll have 2 co2 bags up. If the RH becomes a problem or temp I'll put the extraction/intake back on 100% of the time. The extraction fan/intake is set at a ratio of 2 to 1. (100% extraction 50% intake) making a negative pressure environment, best way to show you have done this, the walls in your tent should cave in lightly Same Day: Okay, so this my last update. Going to run fans the same right up until flower and then I'll be sealing up my tent and adding 2 co2 bags. And will be adding a dehuimifier and setting at 45% it checks every 30mins and if it's gone up it'll turn back on and bring down to 45 or set RH, so no co2 will escape. The temp will be bordering 30-33c and then when they go into their rest window they'll be transferred to to a negative pressure environment with low temps and 45-50%RH. I'll only be able to do this for the 3 weeks of pre flower. And maybe some more, it depends how hard the dehuimifier will be working, but i want dense buds and only way to improve that is by introducing Co2 and then a negative pressure cold environment for terps. Then I'll be putting them back into full negative pressure environment and the Co2 will be useless, again all depends how it's gonna affect my bottom line. That and I only have 2 intake fans. I'll be going into detail about my Co2 adventures the week before I'll be prepping them to be able to withstand high temps, so I'll gradually bring up the temps the last wk of veg 28c max and that way when I push it to 30-32c in pre flower she won't stress as much, I'll have to add frozen water bottle or set up a copper chiller pump to run into my DWC tanks, as it's only for 3 wks I think I'll stick to the frozen water bottles, if I can't maintain 78f 20c in my buckets I'll build my own chiller that'll run copper pipping into cold water and then into my tanks and recirculate it. Thanks for reading, this is the last update for this week other than pics/video.. gottagrowsometime
Likes
30
Share
Day 71 - Defoliated today as she's starting to swell out. Took off around 30-40 fan leaves around the edges but also those growing towards the inside on the plant. Day 73 - I woke up this morning to the smell of sweet sweet Mary Jane! I left the tent slightly peeled open for the night to help with humidity and this morning my house smells of weed! Time to get out those odor control gels! By the way it smells amazing. Day 75 - I added a video flyover of my tent. Defoliated some more light blocking leaves this morning. In doing so I brushed by some flowers and man they are getting sticky!
Likes
14
Share
@Trinidad
Follow
She was left to dry for 13 days. I smoked some of her buds while drying. Offical weight could of been higher if I had the patience. She have a unique smell, very fruity and musky. I will have to wait for the cure to give more fair analysis. I smoke her in the evening when I am winding down after work and preparing for sleep. I had to weigh her in two parts. One part I took my time to trim the other I just gave a rough trim and placed in jars. I took about 3hrs to trim.
Likes
142
Share
ICE flushing + 48hrs darkness - then I choped ✂️ and hang them up now drying at around 60%rh but not best temp but around 20-22° C but still fine - waiting for like 10-14 Days before the fun part starts