The Grow Awards 2026 🏆
Likes
Comments
Share
@Hazelmaus
Follow
Unfortunately, I messed up a little bit with the side branches, I wanted to have them all at the same height when beginning the flowering phase. Nevertheless, I will let them grow and try to fill as many squares as possible. All in all she lools quite pretty imho
Likes
46
Share
Sehr schlechtes Wetter, kalt, regnerisch, kaum Sonne. Aber kein frost. Die laubblätter verfärben sich durch kalte Nächte und beschädigten wurzeln( zu nass).. es läuft, aber suboptimal.. Bis nächste Woche ✌️
Likes
5
Share
@Aleks555
Follow
Harvest — Amnesia X3 Turbo Feminized by Seeds Mafia After 117 days from seed, our Amnesia X3 Turbo Feminized has reached harvest — and what a journey it has been! The plant matured into a stunning structure, with dense, resin-soaked buds and that unmistakable Amnesia aroma: citrusy, spicy, and uplifting. We trained her under a SCRoG net, which helped to maximize light penetration and support the heavy colas. She responded beautifully, growing strong and full of energy. 🌡️ Day temp: 25–26°C 🌙 Night temp: 20–21°C 💧 Humidity: ~45% 💡 Light schedule: 12/12 💨 CO₂ supplementation 🌱 Nutrients: Xpert Nutrients (full cycle) We couldn’t wait — and tried a quick sample dried in the microwave. The effect was intense, fast-hitting, and long-lasting — a true turbo Amnesia experience! Easily one of the most powerful sativa-dominant strains we've grown. Huge thanks to Seeds Mafia for the top-tier genetics, and to Xpert Nutrients for the professional-quality fertilizers that helped bring this beauty to her full potential. We’re beyond satisfied with the results and can’t wait to enjoy the full cure!
Likes
9
Share
@Piorkeed
Follow
Week 3 (06/02 - 12/02) During this week I will try to apply the LST to the plants. On the inkbird, I will switch the fan with the extractor. The heating/cooling system parameters will be: 23.5°C (+0.5°/-3°C). The extractor will be on 5 hours in the morning, 5 hours in the afternoon. I will continue to feed the plants with tap water and only 2ml/l of Bio-grow. I will increase the light up to 75% with a distance of 30cm from the top of the plants. 06/02 D15: - 07/02 D16: first LST, bent down the pants directly to the soil. Watered the plants with tap water (0,5l each) 08/02 D17: I increased the inkbird cooling parameter to +1°C because the temperature inside the tent starts to increase faster. The plants seem to have responded well to first training 09/02 D18: watering day. I added 2ml of Bio-grow to 1.5l of tap water. 10/02 D19: - 11/02 D20: today I applied a second LST bending because the plants started to grow strait. After the training I sprayed the pants with tap water. 12/02 D21: watering day, I added 3ml of Bio-grow to 1.5l of tap water
Likes
15
Share
@EasyAutos
Follow
Both Phenotypes responding very well to training. Vanilla Latte Showing Pre Flowers on Day 31 I'm using diatomaceous earth as a silica ammendment at 1/4 cup w/ water per week, it is excessive but imprpves soil water retention and stem growth has significantly improved 72 hours after application. Vanilla latte lost 4 inches off the main cola. Snapped while training and it's first week of flower. Hopefully it's not to stunted. 🤷‍♂️
Likes
11
Share
@PanGrower
Follow
The bush has been moving for 2 weeks now and I have no opportunity to take detailed photos. The grow report is being supplemented after 3 months.
Likes
224
Share
@Ju_Bps
Follow
Hello growmies 👩‍🌾👨‍🌾🌲🌲, 👋 Flowers continue maturation, End is approaching, one more week with nutes, and flush for the next/last week. 💧Give water each 2 or 3 days 1,5l Water + Nutri NPK Bloom + Sugar Royal 1,5l Water + Nutri NPK Bloom PH @6 - Nutri NPK Bloom 1/2 tsp for 1 gal. 💡Mars Hydro - SP 3000 100% 43 cm. 🔥 Thanks community for follow, likes, comments, always a pleasure 👩‍🌾👨‍🌾💚🌲. Mars Hydro - SP 3000 💡💡 https://www.mars-hydro.com/sp-3000-samsung-lm301b-greenhouse-led-grow-light NUTRI NPK 💥🔥 https://www.nutrinpk.com/product/npk-mix-pak-for-4-to-5-plants-cannabis-fertilizer/ Pure Instinto - Strawberry Shortcake Auto🌲🌲 https://pureinstinto.com/product/strawberry-shortcake-autoflower/
Likes
12
Share
Привет друзья. Моей растихе сегодня 60 дней. Начал применять LST технику на 19 дне и продалжаю применять её через день, а 18 августа добавил ДЕФОЛИЗАЦИЮ С 20.08 ДЕФОЛИЗАЦИЮ делаю каждые 3,4 дня С 20.08 LST технику делаю каждые 4.6 дней На сегодняшний день влажность 60% 15 дней назад заметил высокий Ph 7.9 С 48 дня Ph не ниже 5.8 На сегодняшний день Ph 6.0 Начал кормить с 60 дня Canna Terra Vega PPM 550 Погладитель влажности, выполняет свои функции. Посмотрю на динамику. Всем мира и добра! https://t.me/smail_seeds #Smail_Seeds
Likes
37
Share
I had to harvest my Blue Dream plant early due to some larger mold spots I found on the buds. To prevent the mold from spreading to my other plants, I acted quickly and made the cut. Unfortunately, this meant I couldn't give her a proper flush. Despite the abrupt end, the aroma of the buds is fantastic, and I'm optimistic about the taste. During trimming, the scissors became sticky with resin, which is a good sign of potency. I carefully harvested bud by bud to ensure I didn't miss any mold-affected areas. Unfortunately, the main bud had the worst mold spot, so I had to take it apart. It's puzzling since they were never outside during rain and only had to contend with morning dew. Overall, I'm pleased with this grow and feel humble. It was an incredible journey filled with challenges and triumphs. I'm looking forward to enjoying the fruits of my labor and learning from the experience. Thank you to all my growmies for following along and being part of this learning experience. Your support means a lot. Stay tuned to see how my remaining two trained ladies turn out. One love, one community. ❤️ Harvest Report: Blue Dream (Update 09.08.) After 9 days of drying, I brought the Blue Dream buds into my apartment for the final trim before jarring. The initial yield was 40 grams, but during my last inspection, I discovered more mold spots, this time buried deep within the buds. Unfortunately, all the larger colas were affected, forcing me to take the buds almost completely apart. In the end, I managed to salvage 21 grams of pure, healthy buds without any mildew. I also set aside 6 grams of “quarantine” buds, which I’ll dry separately. Sadly, I lost 13 grams to mildew—a tough blow, but one of the harsh realities of outdoor growing. It’s disheartening, especially since three other friends experienced similar losses this season. Honestly, I’m not sure what I could have done differently, aside from discarding the plant earlier. But even with these setbacks, if the cured buds taste as good as they smell, I’ll still consider this grow a success. The genetics from Fastbuds proved to be solid, and I recognize that the challenges I faced were largely due to environmental factors and my own decisions. This was a learning experience, and despite the issues, I'm happy with what I've achieved.
Likes
1
Share
@Urunascar
Follow
Mostraron las primeras señales de flora entonces arme una estructura afuera para los Led con los que había empezado el cultivo y poder darles 18hs de luz fijas todos los días además de la luz solar qué reciben
Likes
16
Share
Esta planta tiene olor a gasolina y cola de zapatero, un olor muy peculiar, sus flores son más compactas con cálices pequeños y una resina pegajosa
Likes
7
Share
Vamos familia actualizamos la cosecha de las gelato Olandese de Dutchfem . La verdad que el secado muy bien 7 días en Malla y a los botes, 40% humedad y 24 grados es la temperatura ambiental que han tenido en el secado. Por lo demás de miedo os la recomiendo. Gracias a DutchFem, Agrobeta y Mars hydro , sin ellos este proyecto no sería igual 🙏. Agrobeta: https://www.agrobeta.com/agrobetatiendaonline/36-abonos-canamo Mars hydro: Code discount: EL420 https://www.mars-hydro.com/ Buenos humos.
Likes
2
Share
Going tie them down this week topped most branches this morning
Likes
6
Share
@BigGGrows
Follow
This week was a big week for the candy cush. I noticed upon watering her to run off, that in the same day the pot would go super dry and light weight. I also noticed stress in the leaves and roots poking out the bottom of the pot. It was time for a transplant. So far so good! Upon transplanting i performed more LST to help her fill in the pot. She went from a 1 gallon to a 5 gallon. She was also defoliated thia week.
Likes
5
Share
Don't have a lot of time these days to take pics so I'll sum things up. CO2 got outta control and the plants took tf off literally. The video is around middle of week 3, I had to flip at week 4 BC I literally ran out of room and I had to constantly defoliate.
Likes
38
Share
@PapaNugs
Follow
A more difficult week. I've been battling the water consumption on two of the girls. I ordered and hooked up the Blumats auto watering system. I followed the instructions to a T but they don't work on those settings for this type of plant. They must be recommending for succulents cause the girls dried out right away with the settings. So I've been slowing dialing it in the get the proper amount to release. This Gorilla Cookie is my problem child right now. She is so delicate. Underwatered all the time. Then when you water a bunch she's overwatered. It's a dumb situation. I've never ran into this. I just think she outgrew her pot too soon and could benefit from synthetic nutrients. She's not gonna get them so tough luck. Dimmed to 80% Here are the lights details: Medic Grow Mini Sun-2 150W LED Model: MN150-022 Spectrum mode: V1 Efficacy: 2.8 umol/J Thanks for stopping by! You can find the light on Grow Diaries: https://growdiaries.com/grow-lights/medic-grow/mini-sun-2-150-watts You can find the light on Medic Grow's website: https://medicgrow.com/
Likes
16
Share
@IQuSX
Follow
The second branch has grown and leveled with the base🏎️🏎️ I think about one more week & let’s go to the bloom