The Grow Awards 2026 🏆
Likes
Comments
Share
Le hice budwashing o lavado de cogollos ya que estaban muuuuuy atacados de esta ultima semana por arañas rojas del capullo.. no ha tenido creo yo ni una semana entera de treguas esta planta, pero bueno, pese a todo la he podido cosechar y relativamente bien. Hay fotos en las que se ven las telarañas cubriendo a saco los cogollos, pero luego subo fotos y video de los cogollos colgando del tendedero para quitarle el exceso de humedad al sumergirlos en diferentes soluciones con agua y ahí ya si se ven limpios, igualmente cuando sequen y manicure les haré mas fotos.
Likes
5
Share
🌿 **Green-O-Matic Grow Week 9 Update: Nearing Harvest Time!** 🌱 Greetings, fellow growers! It's time for an exciting update on the progress of our Green-O-Matic journey as we reach Week 9 of the grow cycle. With anticipation building and buds swelling, let's dive into the latest developments: 🌟 **Bountiful Bud Development**: At Week 9, our Green-O-Matic beauties are truly showing their potential, with buds swelling and resin production kicking into high gear. The once-small flowers have transformed into dense, frosty nuggets, promising a bountiful harvest in the near future. Trichome production is in full swing, indicating peak cannabinoid potency and aromatic complexity. 📏 **Final Stretch of Growth**: As we enter the final stretch of the flowering phase, our focus shifts to maximizing bud development while ensuring optimal ripening conditions. With careful attention to environmental factors such as temperature, humidity, and airflow, we aim to create the perfect microclimate for our plants to thrive and reach their full potential. 🍃 **Leaf Senescence and Nutrient Management**: As expected in the late flowering stage, some leaves may begin to exhibit signs of senescence as the plant reallocates energy towards bud production. This natural process is perfectly normal and serves as a signal that the plant is nearing maturity. Meanwhile, our nutrient management strategy remains vigilant, providing the essential elements needed to support robust flowering without risking nutrient imbalances or deficiencies. 🔍 **Monitoring Trichome Maturity**: With harvest on the horizon, we're keeping a close eye on trichome development to determine the optimal time for harvest. Using a jeweler's loupe or digital microscope, we inspect trichomes for signs of maturity, aiming for a mix of cloudy and amber trichomes to achieve the desired balance of THC and CBD levels, as well as flavor and aroma profiles. 🌞 **Preparing for Harvest**: As we prepare for harvest day, our checklist includes gathering supplies such as trimming shears, drying racks, and storage containers, as well as ensuring a clean and sanitized workspace to maintain the integrity of our precious buds. Proper post-harvest care and curing techniques will be employed to preserve terpene profiles and enhance overall quality. In conclusion, Week 9 marks a pivotal moment in our Green-O-Matic grow journey, where patience and precision culminate in the imminent harvest of our prized buds. Stay tuned for the next update as we celebrate the culmination of months of dedicated cultivation with a bounty of premium-grade cannabis ready to be enjoyed and shared. Happy growing! 🌿✨ 🚫 **Addendum: Phenotype Bin Update** 🌱 In the spirit of transparency and continuous improvement, it's important to note that we've made the decision to bin one out of the three phenotypes due to poor development. Despite our best efforts and meticulous care, this particular phenotype failed to thrive and did not meet our quality standards. While it's always disappointing to part ways with a plant, this decision ensures that our resources and attention remain focused on nurturing the strongest and healthiest phenotypes to their fullest potential. By removing underperforming individuals, we can redirect our efforts towards optimizing the remaining plants for a successful harvest. Rest assured, this adjustment will not deter us from our commitment to excellence. We remain dedicated to the cultivation process, learning from each experience, and striving for the highest standards of quality and consistency in our cannabis cultivation journey. Thank you for your understanding and continued support as we navigate the complexities of plant development and refinement. Together, we'll continue to grow and evolve towards greater success in our cultivation endeavors. 🌿💪
Likes
11
Share
@Albargina
Follow
Semana con sentimientos encontrados!😂😢 Contento por que voy a poder probar por fin la Ansiada Gorilla Snow ultra CBD y La Katana de Élite Seeds, el que es para mi el mejor banco por su gran trabajo con sus genéticas, por otra parte triste por que hasta que no pase el veranito no volveremos a cultivar por el tema de la calor! Esta semana empiezo a quitar hojas poco a poco, esta es la segunda semana que están con la limpieza de raíz así que para final de semana las cortaré, estoy empezando a ver que algunas tienen un poco de araña roja espero que no se extienda mucho y no me fastidie! Las Gorilla Snow Ultra CBD parece una variedad exquesita, y en unas condiciones climatológicas mas adecuadas debe de ser una pasada en cuanto a su producción de resina, no os quiero contar La Katana...😵 menuda manta de resina tiene encima es una barbaridad!!
Likes
9
Share
It's been a beautiful plant to grow, I thought she was gonna be a little bigger, however she has produced an amazing quality flowers, very sticky, terpy and stinky, the citric aroma it's absolutely wonderful just because of that I could grow her again and again. You definitely need to try this strain if you lovd weed.💚🌱🤤
Processing
Likes
38
Share
8/2: Everybody is potted up in a 3 gallon pot now. I sprayed them all with Boom Boom Spray one day, and foliar fed with kelp and Superthive all week. They got their first real feeding with TPS One and seemed to like it. I also gave them a little molasses.
Likes
21
Share
Males decided to show themselves, had 3 males out of 6 plants, after pulling the males I ended up with 2 sour 60 females and 1 berry Ryder female, Starting nutes next watering and continuing the lst
Likes
18
Share
@Luv2Grow
Follow
Overall the grow went pretty smooth and really had no issues along the way. She took to LST like a champ and buds were fat and dense.
Likes
11
Share
@4F1M6
Follow
These ladies are stacking some fat colas. Its all flowers now as they are blooming with vigor. Very happy and healthy and chugging along like nobody's buisness. Sexy,fat, lush foliage all over their frames. Enchanted. They got treated with Dr zhymes as a preventative. That will basically wrap up their treatments ...possibly once more with lost coast. Upped the pk intake as they are blooming strong now. Gotta keep those engines well fuelled. Response was stellar. Happy happy happy ladies. Until next update. Happy growing and stay lit fam.
Likes
13
Share
@Danylo
Follow
Harvest is imminent! I'm basically just waiting for her to drink her last watering. So 1-3 days I guess - my last few "finished" plants basically stopped drinking much at the end, and she seems to be the same. But my last post was about a week ago so one more flowering week report! A few days ago I took off some of the brittle taco-ified fan leafs. My guess is they don't do much for photosynthesis anymore and just prevent lower growth from getting light. Upper leafs by now have turned a pretty violet/plum color! I put a leaf from another plant in the picture for comparison.😊 Structurally there is little change since last week. Smell is still incredible too! She is significantly heavier than three weeks ago so the stems are losing the battle against gravity.. but as she's coming down in a few I'm not gonna go wild with jojos or garden wire. 🤷
Processing
Likes
10
Share
@GrowerGaz
Follow
Very happy this week as my friend gave me a female Mac x Purple Punch he was using as a mother plant. That is in an 18 litre soil pot. The 3 Rado Z are now in 15 l autopots fitted with airdomes. A soil mix was made with dutch vega bio soil , Bio grow and silicium flash. The MacPunch I have stripped the lowers and trained it using easy bend clips.
Likes
2
Share
@bbs42
Follow
Day 23, been QCing the buds and lots defoliation the past 2 days. Getting caked in Trich and some nice bright orange hair poping out. Added trimmed buds to mulch layer. No fan leaves in mulch
Likes
20
Share
Que hay familia ya traigo la última semana de floración de estas Lava Cake de Zamnesia. Vaya color que se marcan todavía, están bastante sanas , los tricomas están pegajosos , tiene unos aromas espectaculares, me tiene enamorado.Están ya a punto de caramelo. Temperaturas máximas en 28 y mínimas en 25 y una humedad estable en torno al 36%. Os comento que tengo un descuento y para que compréis en la web de Zamnesia de un 20%, el código es ZAMMIGD2023 The discount 20% and the code is ZAMMIGD2023 https://www.zamnesia.com/ Agrobeta: https://www.agrobeta.com/agrobetatiendaonline/36-abonos-canamo Mars hydro: Code discount: EL420 https://www.mars-hydro.com/ Espero que lo disfrutéis, buenos humos 💨💨.
Processing
Likes
72
Share
@DreamIT
Follow
🐩👤Sirius Black👤🐩 by 🌍🌱WeedSeedsExpress🌱🌍 👤 2.2 ... 👤 3.2 Everything is going well, I like this lamp very much, it also seems to make plants bloom faster than the previous one. Super yeah !!! 👤 4.2 ... 👤 5.2 lumos maxima! 🤣🤣🤣 👤 6.2 👤 7.2 👤 8.2 ____________________________________________________ 👀Are you looking for a good lamp to start?👀 Viparspectra in my opinion has something more than the others, take a look at their site. ➡️ http://bit.ly/pro-seriesproductspro-series-p1500 ⏩Use " GDVIP " for an extra discount💯 ____________________________________________________________________________________ 📜👀 A look at the details of what I'm growing 👀📜 🐩👤Sirius Black👤🐩 by 🌍🌱WeedSeedsExpress🌱🌍 📋 Details 📋 ⚧ Gender ▪️ Feminised ➰ Genes ▪️ 70% Indica / 30% Sativa 🎄 Genetics ▪️ Sirius Black 🚜Harvest ▪️ 450 g / m² 🌷Flowering ▪️ 63 - 70 days ✨THC ▪️ 25.0% ✅CBD ▪️ 0.5% 🏡Room Type ▪️ Indoor 🌄Room Type ▪️ Outdoor 🕋Room Type ▪️ Greenhouse 🎂Release Year ▪️ 2020 ____________________________________________________________________________________ 👀📷 Follow the best photos on instagram 📷👀 https://www.instagram.com/dreamit420/ 🔻Leave a comment with your opinions if you pass by here🔻 🤟🤗💚Thanks and Enjoy growth 💚🤗🤟
Likes
9
Share
Harvest day 69 since time switch to 12 / 12 h Hey guys :-) Finally it's time 💚 The lady is done the large leaves have been removed and hung upside down to dry in the dark drying room. You can now stay there for 13-15 days at a temperature of 18-20 degrees and 55-62% humidity. After 13-15 days it is neatly trimmed by hand and placed in jars with boveda packs 62. After 4 weeks Boveda 58% come in and are ready for testing ;-). After everything has been cut cleanly, the last update comes with the smoke report and the finished pictures. Have fun and stay healthy 💚🙏🏻 👇🏼👇🏼👇🏼👇🏼👇🏼👇🏼👇🏼👇🏼👇🏼👇🏼👇🏼👇🏼 ‘Powered by GreenHouse Feeding’ Copy the link for 10% off all Nutrients 👇🏼 http://shop.greenhousefeeding.com/ affiliate/madelngermany_passiongrower/ 👇🏼👇🏼👇🏼👇🏼👇🏼👇🏼👇🏼👇🏼👇🏼👇🏼👇🏼👇🏼 Water 💧 💧💧 Osmosis water mixed with Cal/Mag (24 hours stale that the chlorine evaporates) to 290 ppm and Ph with Ph- to 5.8 - 6.4 MadeInGermany
Likes
20
Share
Day - 112 She has grown a beast with some massive dens nuggets. Should get about 200g - 10% dry bud. Very strong smell and frosty nuggets ❄️👊👍 Great strain and my record on Auto yield 228g. Nice nuggets and good smoke
Processing
Likes
2
Share
She looks excellent on gje second week, very very terpy smells super dank and sweet,looks like she's very happy so let's see how she develops those frosty flowers 😍🌱, the smell is very powerful and strong man, I'm in love with this strain,I always recommend to every single grower please fed the plant properly that's for sure but please do it the organic way, and here's the demonstration,crazy resin production, very sticky and stinky,I didn't thought she abd her sister were going to produce such a crazy amount of aromatic very cery very sweet resin, I don't even know how to explain the aroma,but super floral,that's for sure. In love with this strain that after 19 days flowering she's producing such a big quantity of quality sweet cristals,thank you guys for creating this awesome genetic,I'm definitely happy and satisfied.
Likes
29
Share
@Smokwiri
Follow
Almost finished, flushing 10% discount on Zamnesia seeds with code GROWITGD
Likes
10
Share
Did some minor defoliation, and added final nutes before flush. Although stunted in veg, the outer two smaller plants are flowering well, thickening up, and smelling dank af... the center largest plant is still dealing with some type of deficiency that's been very difficult for me to diagnose. It's still chugging along with lots of bud spots, but the kolas aren't nearly as thick and seem like they might turn out larfy. It's also drinking the same amount of water much more slowly than the other two smaller plants... kinda strange right? Ps. I kinda f-ed up the compost tea and fed it to the plants before knowing it... I let the tea brew for 72 hours and should have stopped at 48 hours... plants didn't seem to mind too much though (I don't think the center plant's deficiencies have anything to do with the overripe tea.) and don't pay any mind to my nute percentages, I can't deal with that rn 😂
Likes
6
Share
Back on track everything looks fine. Ph runoff stable at 6.3 feeding twice daily now 1.5L in morning 1L evening. Have reintroduced silica at a reduced 2ml per 25 litre. Attempted some lst with plastic clips and did a lot of damage removing so will not be using them again. Am happy to just top and tuck for now till we are ready for trimming. Heights vary from 20cm to 29cm
Likes
14
Share
D78/F34 - 17/06/23 - I changed light schedule hoping she's going better. (6 only red ligh and 7 red-white) D79/F35 - 18/06/23 - New lights schedule is running D80/F36 - 19/06/23 - Added water and integrators EC 1.0 and pH 6.4 D81/F37 - 20/06/23 - Nothing to report D82/F38 - 21/06/23 - Added water and nutes EC 1.0 and pH 5.7 D83/F39 - 22/06/23 - Temp is too high for both water and environment. I see signals of suffering on the flowers (foxtailing) D84/F40 - 23/06/23 - I'm trying to keep the Tremp under control but isn't easy. To lowering water temp (that now is about 26 °C) I'm adding some ice to the water
Likes
34
Share
My first time making alcohol tintcure Using the c1 , Hold on tight gonna be a trip