Day 1: Popped. Temp: 75º RH: 82% + PPFD: 250 Day 2: Temp: 75º RH: 82% + PPFD: 250 Day 3: Roots showing through the bottom of the rapid rooter. Dusted roots with Tryfecta Myco Supreme (FoxFarms) and transplanted to 3 gallon pot w/ProMix HP. Temp: 75º RH: 78% + PPFD: 300 Day 4: 5-10ml ph 6.2 water feed. Temp: 75º RH: 75% + PPFD: 300 Day 5: Showing second set of leaves. Temp: 75º RH: 75% PPFD: 300 Day 6: Temp 75º RH: 75% PPFD: 300 Day 7: Temp 75º RH: 72% PPFD: 300 Both + Speed Autos are falling a little behind this first week which I find a little surprising given the name.We'll see how they do in week 2. Will continue to mist spray a few times a day for the next week with maybe one more 5-10ml ph 6.2 water feed.

Well, I've almost made it to the finish line. Finally brought down the two KTs. Was A LOT more work than I anticipated and the magic wore off quickly! After hours and hours of trimming and some easy drying at about 73 F and 63 RH. About 8 days for the KTs, then another trim and jarred them up. Scale was acting up a bit but my count is 10.4 ounces dry between 2 plants. Happy with the yield. Am currently a little concerned that it doesn't smell like much. Didn't over dry, didn't quickly dry. In jars the RH is showing 61 or 62. Really hoping some individual character comes back to them! Will return to update smoke report. OG and Blueberry still drying.

ZTRAWBERRIEZ and Gorilla Punch don't need much longer. In this week the pistols all were coloured in orange. The buds did their bulk perfectly. We got temps +30 degrees so in the greenhouse there Are +40 degrees. The following week should get cold and rainy. ZKITTELZ needs a little more time but also is doing good.

- 17-05-21 (Day 1) // // - 18-05-21 (Day 2) three of the girls got out of the soil correctly!😊 while the Runtz sprout is the only one that still remains in its seed despite she already opened it for 2/3 day now..🤔 its root seems to struggle to grow or pierce the soil .. I'm helping her by keeping the humidity higher since I put this bag, we'll see what happens 🤷‍♂️🏻 ..Any advice will be welcome 🙏🏻 as always have a nice day and happy growing to everyone! 😊☮️💚 19-05-21 (Day 3) ..Unfortunately the Runtz Muffin is dead, was unable to come to life like her little sisters. After three days, i tried to help her removing her seed husk.. but there was nothing to do 😢 So here is a new start!! 😊 I put this Lemon Tree “Freebie” seed to germinate aaand to replace the poor Runtz Muffin. 😕🙌🏻 We'll see how it goes this time.. 🤞🏻🍀 Sending positive vibes for you and your garden ☮️💚 20-05-21 (Day 4) All the girls are doing great and continuing their grow. The Lemon Tree is doing great too with its germination, that in just six hours the seed has opened! Now I’ll wait that the sprout grow a tiny root of (1,5/2cm) at least, to pass it into the soil. Happy grow fam. Stay smoky 😙💨 21-05-21 (Day 5) With today the girls are in their fifth day of growth. 🙌🏻 Bio-heaven (amino-acids) added to the recipe (1ml/1L) As you know after the death of Runtz Muffin, I have been germinating the Lemon Tree for two days now, today is the third day for her after an excellent germination, I have transferred it from the paper towel to the soil to make it grow. Let’s see how she will grow, Despite being a week behind, I hope she grows strong, healthy and fast🤞🏻 Have a good weekend, lift up and relax. Peace ☮️ 💚 22-05-21 (Day 6) The Lemon tree is officially out of the soil, ready to grow! 🙌🏻💚 The other girls are fine, they are on their sixth day of life and they love the environment where they are growing up. ..Plus they are always listening to music (Lo-Fi) 24/7 ☺️ I hope they like it.. 🤷‍♂️🏻😆 That's all for today. Have a good weekend gromies!! 🧑🏻‍🌾👩‍🌾🏻☮️💚 23-05-21 (Day 7) Today last day of the first week for the girls and first day of life for the Lemon Tree! The nourishment for them is always the same, except for the Lemon Tree which for the moment I am just spraying water to irrigate it. ..In this round I expect great things! Happy growing to everyone! ☮️💚

05/03 - (C) - All the babies are coming along amazingly - They are in week 2 of early pre-flower and white hairs are setting in accordingly - Since the addition of the drip lines and keeping their feeds consistent they are thriving and coming into flower without any issues. 05/03 - (M) - The mother is also coming along nicely - Dense nuggs with heavy trichome build up on all the colas - I have increased her feeds to twice a day at 1 minute feeds per cycle. 05/07 - Disclaimer - Please disregard the weeks on the grow calendar as I am now they are offsetted for Mother - Clone harvest. 05/07 - (M) - Cutting down the mother this weekend, She seems to be suffering a bit from being ran so long (Lessoned learned) - Her buds are dense and frosty af!!😎😎😎- Her dry run will be as much as 60-60 can be (Low and Slow). 05/07 - (C) - Clones are in early flower running accordingly - since hooking them up to the Vivosun Drip system their feeds have become more consistent allowing them to feed on schedule - the feeds are offsetting clean water and nutrient feeds - They will continue to run in the 3x3 until the mother is dried out and harvested then they will be moved into the 4x4 - I will also increase "Cane Molasse" dosage to increase trichome production and facilitate and more robust terpene profile for all of them. 😎😎😎😎.. Peace and Bud..

The plant grows perfectly,I added lighting 165 watts

Hey everyone 😃. Due to the lack of space in the flower tent at the moment, I decided to use a delayed LST for the 2 women 🙂. So I can let them grow again in the next 30 days until there is room in the flower tent 😄👍. I'm curious to see how they will recover, and I think that growth will continue in the next 48 hours 👌. I wish you a lot of fun with the update, stay healthy 🙏🏻 and let it grow ☘️🍀 You can buy this Strain at : https://sweetseeds.es/de/cream-caramel/ Type: Cream Caramel ☝️🏼 Genetics: Blue Black x Maple Leaf Indica x White Rhino 👍 Vega lamp: 2 x Todogrow Led Quantum Board 100 W 💡 Bloom Lamp : 2 x Todogrow Led Cxb 3590 COB 3500 K 205W 💡💡☝️🏼 Soil : Canna Coco Professional + ☝️🏼 Fertilizer: Green House Powder Feeding ☝️🏼🌱 Water: Osmosis water mixed with normal water (24 hours stale that the chlorine evaporates) to 0.2 EC. Add Cal / Mag to 0.4 Ec Ph with Organic Ph - to 5.5 - 5.8 .

Hey fellow green thumbs! 🌿💚 The day has finally come—our Auto Northern Dragon Fuel from Super Sativa Seed Club has been harvested! After an exciting journey, we’re thrilled to share the details of this incredible plant’s final stage. Let’s dive into the harvest report! 🌟 Harvest Details: Day 75: Harvest Day • Harvest Date: Day 75 • Harvest Method: Our beautiful Auto Northern Dragon Fuel was harvested yesterday. After weeks of careful nurturing, the time was right to bring in this amazing plant. 🌿🌼 • Preparation: Before hanging, we meticulously cleaned the plant, removing all leaves without trichomes to ensure a smooth drying process and to enhance the quality of the final product. 🌿✂️ Current Drying Process: • Method: The entire plant is now hanging upside down to dry. This method helps maintain moisture levels within the buds, allowing for a slower and more even drying process. 🌿🔄 • Environment: • Temperature: 18-22°C (65-72°F) • Humidity: 50-60% Maintaining these conditions is crucial for achieving a perfect dry and preserving the plant’s aromatic and flavorful profile. 🌡️💧 🌟 Plant and Bud Characteristics: Auto Northern Dragon Fuel: • Bud Structure: Dense and sticky, with an impressive trichome coverage. The buds are beautifully formed, showcasing the robust genetics of this strain. • Aroma: Even in the drying phase, the rich and potent aroma is unmistakable. Expect a delightful scent that hints at the powerful experience to come. • Trichomes: A thick layer of trichomes covers the buds, promising a potent final product with a great flavor profile. 🌿✨ 🌟 Care Tips: • Drying Process: Patience is key. Allowing the plant to dry slowly will enhance the final quality, preserving both flavor and potency. Ensure good airflow around the hanging plant to prevent mold and mildew. 🌬️💧 • Trimming: Once the drying process is complete (typically 10-14 days), it will be time to trim the buds. This is where we’ll shape the final product and get it ready for curing. ✂️🌿 • Curing: After trimming, curing the buds in jars for at least 2-4 weeks will further enhance the flavor and smoothness. This final step is essential for achieving the best possible smoking experience. 🍁 🌟 Genetics Spotlight: Auto Northern Dragon Fuel: • Characteristics: Known for its robust structure and dense buds, this strain has shown remarkable resilience and impressive bud development throughout the grow. The final product promises to be potent and flavorful, thanks to the thick trichome coverage and rich aroma. • Harvest Expectations: High-quality buds with a strong aroma and potent effects. The slow drying process will ensure the best possible preservation of cannabinoids and terpenes. 🌍🌿 Fun Fact: Did you know? 🌿✨ Drying the entire plant slowly helps retain more terpenes, which are responsible for the plant’s aroma and flavor. This method also helps preserve the potency and quality of the buds, resulting in a smoother and more enjoyable experience. For all the in-depth action and detailed explanations, head over to my YouTube channel! 🎥✨ I’m sharing all the tips, tricks, and step-by-step guides to help you get the best results from your grow. This week’s harvest has been particularly exciting, and there’s so much more to explore and learn together! 👉 Join me on YouTube Link in my profile 👈 🌟 Conclusion: Harvesting Auto Northern Dragon Fuel at Day 75 has been a rewarding experience. With the plant now drying, we’re eagerly awaiting the final product. Stay tuned for updates on the drying, trimming, and curing process, and get ready for a high-quality harvest! Happy growing, and see you next time! 🌿💚✨ #SuperSativaSeedClub #HarvestReport #NorthernDragonFuel #PlantMagic #GardeningJoy #NatureLovers #PlantPower #InspireGrow #YouTubeJourney

8-10 days in fridge and I’ll post last update with cured buds

Day 35 and she is a beauty. She has a nice color and I love her structure. I am going to call it flower this week since she is well into preflower. The system is running great. Haven't had any roots try to grow into the pipe yet. Going to start them on a little maxibloom soon.

They r going! I definitely don't reccomend the strain Bloody Skunk from Sweet seeds to anyone Not well stablished tons of problems

Chopped the first GG plant will update after it drys and I trim it. The cheese plant that isn't LST probably has another week or so maybe less. The rest have a few weeks slowly making more room in the tent. Only giving water for the rest of the time maybe some cal-mag to help the plants that at burnt (NL, both cheese).

Glory to Ukraine!

Week 4 for the indoor black Lebanon by SSSC Phenos 4 & 1 are for sure the ones packing on the size of buds first. Hoping the other 2 catch up. They were only feed plain water next week ill probably give them a feeding of greenhouse feeding bio enhancer for some extra boost. They are all smelling of a strong nutmeg type spice atm.

This Will be wrapping up the purple Queen and blue dream grow leaves on the purple Queen are starting to really color out as So when it's at the end of its life . Just RO water ph down to 6.8 until you get a PPM of 300. I'm going for Around about 150 100.

Had problems with ph swing on this run and a faulty ph meter caused extra issues but overall it bounced back well. Moral of the story is always have a spare ph tool lol

2 nights into flower and already they've doubled in size, from what I've seen , this strain is a pure stretcher. Added the scrog net about a foot and a half above the plants. Each plant has 4 main colas. One plant is showing expressions of pink in the leaves and stems, picture below of the leaf. 14.6 Last day of the week (sort of). We're going to conclude the weeks diary on Sunday now instead of Tuesday, it's much easier for my brain that way. All looking well. I can't seem to find the (albeit very mildly) plant that had pinky expressions anymore, although two of them seem to have red streaks on the stems which the other three don't so we will see, I'm hoping there's enough space in here to grow these girls, hopefully the scrog will save my ass. There's some slight discolouration in a couple of leaves on only two plants, not sure why it what may have caused it, maybe spilt nutrients water(although it's a very mild solution). Started introducing nutrients now, (my soil/compost mix was super rich in nitrogen but seriously lacking in p and k) liquid for the moment, but I'm going to add a top dress of compost, worm castings, bone meal, root fusion powder, sulphate of potash and guano). This should mean I won't have to feed many more nutrients, I will however be adding the remainder of Plagron's green sensation and top max and bloom to maximise flower production at least for the first 3-6 weeks of flower, we will see, I have no idea how sativa leaning this strain will turn out, I'm under the impression they're all a kinda 50/50 or sativa like structure.

Yet again I am not trying to make my strains look low quality. But this is the truth that I reused. Soil for these and did not let it go through a hole cycle of worm processing. I just slapped nutrients into soil for my last run and hoped for the best. If I had used fresh soil, these would fare better. I'm calling an end to this diary because the other ones look ok, they're mainly going to yield small amounts.But I still get to randomly judge the first three strains I bred.

This grow has been on of them grows when everythings going against you and what you want it to do