The Grow Awards 2026 🏆
Likes
Comments
Share
@BudBeezy
Follow
Welcome to week 3 of my grow diary. Since the plant has grown really well, I decided to top it. I made the cut above node 3. I usually do it above node 2, but I wanted to try something new this time and gain some new experience. Maybe it will work better this way than usual. I also removed one pair of fan leaves so that the lowest shoots can develop well. In addition I will now just let the plant grow without LST. If it is really necessary, I may decide to do it. At the end of the week, it had reached a height of 14 cm. There was no growth stoppage at all after topping. The Sour Jealousy seems really robust. FastBuds always delivers great quality. So far, I've only had one plant that remained a dwarf due to topping. So big shoutout to the breeder! See you next week
Likes
2
Share
@PINUFLA
Follow
Día: 78 Riego: 1,5L x Pl. - Agua Día: 81 Riego: 1L x Pl. - FinalFlush 2mlxL Día: 83 Riego: 1L x Pl. - Agua
Likes
14
Share
@BudXs
Follow
3 for 3 on the bean pops. Now just gotta weed out the males. This grow is for Shawn, the breeders son
Likes
23
Share
@Gram_Solo
Follow
I have topped both RS11 Couple more weeks of veg and we switch to flower 1 plant looking abit weird atm pale and deficiency Maybe some calmag needed?
Likes
33
Share
@Hawkbo
Follow
Lookin good, no more herms so far as I’ve tightened things up hopefully that’s the last of them for good. I installed a 4Inch AC infinity fan and filter as an intake so I have been able to close all of the vents. At this point the leaf strip has proven to be a solid method, I have nothing to compare bud size at this point but just the extra space it opened up is a plus. I’m sure the lowers will be a little more firm and the plants obviously haven’t had to be fed as often as usual so its saving time, water and nutrients. The added microbes have also allowed me to keep my ppm around 1000 instead of 1080ish without any sign of deficiencies. The Mandarin cookies x Dionysus has a little cal-mag issue but that was a trait from the mother which out of 10+ grows all had a cal-mag deficency. I gave everything a little flush last watering and took measurements then a good feed today REMEMBER , IF YOUR SHOPPING FOR GEAR YOU CAN USE THE CODE “BANGDANG” FOR 10% OFF YOUR ENTIRE PURCHASE FROM ANY OF THE FOLLOWING COMPANIES. @greenbuzzliquids @rainscience_growbags @gorilla_grow_tent @growlightscience.led *****Gorilla grow tent discounts extend to all companies affiliated with grow strong industries which include..***** @super.closet Lotus Nutrients Kind LED grow lights
Likes
7
Share
She'll go to sleep earlier tomorrow as she's gonna be flipped into flower finally on her day 30 since planted February 15th, cannot wait to see how big she gets on the final stretch! Stay tuned everybody! My lady have been flipped into flower on February 15th finally! Let's see how big she gets in the first 2 week of flower! Now the fun begins!! 💚💛❤️👨‍🌾
Likes
30
Share
I’m lightly defoliating each and making sure my bud sites are exposed. Everything seems to be swelling up nicely.
Likes
45
Share
@Bembeto
Follow
Se sigue alargando la maduración del pato 🦆 pero bueno, se nota que están ganando tamaño los cogollos y a su vez una forma hermosa😍 Estoy enamorado de los colores ya les contaré aserca de ella cuando llegue la cosecha, muchas gracias por el apoyo de la comunidad a lo largo del proceso, motivan a seguir haciendo diarios incluso mejores y mejores. Un abrazo hasta la próxima actualización ✨✌️
Likes
5
Share
@Zeaiache
Follow
En su Nuevo suelo y con los microbios ganaron vigorosidad, las hojas están frondosas, y sus tallos engordaron, la verdad siento que prometen mucho 😈
Likes
28
Share
Jumped up a few feet idk yet but look like I got a winner here guys might be going in to flower idk
Likes
17
Share
@m0use
Follow
This was a fun project that was a few years in the making and a year later to see if they would last a season for this upload to happen. Before any of this I would bike aorund town grabbing up all the old Ikea solid pine bed slats that I could find and storing them in the basement. I have a lot of wood down there, any size worked as long as I have enough of them. The hot days to find them were the first and last of the months because that's when people where moving in/out. I also kept an eye on the free section on local online classifieds as well. The entire purpose of this was to recycle as much off the streets as I could before buying anything to finalize the project. In the end I only bought sealer, screws and some takeaway/beers. All the wood was 100% free and salvaged off the streets of Toronto saving it from the dumpster bin. After collecting all the slats for about 2 years I was playing aorund with them on how I wanted to make this work. I had previously done a little project like this before but I messed it up and the boxes where crap. did not last longer then 2 seasons, they where thin and shallow as well could not grow much of anything in them. I Was talking to my friend who is renovating their house and we brainstormed some ideas on the boxes, I found some designs I liked online and said lets make something like this out of what I have here. We tossed out a few of the design features when looking at them as it would have been wasted wood and extra work not needed. If I had more wood them maybe it could have been an option but simple was the name of the game. They taught me what I needed to know like how the miter saw and sander worked, plus all the other tools I was using. They did help out with a table saw and creating the triangle support joints in the corners, They used some pine left overs they had while making a staircase indoors. I did not feel up to the task of using a table saw given all the relatives I know who have lost a finger to them. In the end we decided the design would be three boards high and take an alternating pattern on corners. layer one short, layer 2 long, layer 3 short. Went with a galvanized and painted deck screw so it can take the weathering. Ran into some problems like making everything level as some of the boards were warped and other ones had undesired aspects like knots and tacky sticker goo I could not remove. So I used them for the base that will not been seen so much. Clamped everything down and called it a day. Once it was all done and over with, I then brought them back home from my buddies work garage and started to seal them. I went with a boiled linseed oil as its a food safe option should the wood degrade into the soil I will plant in them. I will need to reapply it to the boxes year after year but the main coat is the most important one and I put it on 3 layers with a good dry in between coats. the inside of the boxes that where coated did not degrade at all as the sun did not hit them so it will not need a new coat just the outside. Overall the end result was very impressive for myself, I've never taken a woodworking class ever and It was a near perfect outcome for me. Heavy Duty Planter Boxes for all my gardening needs. I made a last min decision to add in a plastic liner to preserve the wood even longer and stapled that into the frame. it has held up quite well and may need replacing end of 2nd or 3rd year out in the sun. Used a thick moisture wrap plastic with UV protectors in its formula. Lets see what I can grow in them this year! m0use's haus of projects - garden box edition
Processing
Likes
10
Share
@Prop207
Follow
Trimmed her bush, tucked her bits that were sticking out past the fishnets. She's ready to go *Held back on the light switch clones have put their feet down yet. Going another week maybe of veg
Likes
5
Share
Esta semana pasa a floracion y continua la estimulacion con delta 9 y mañana cambia el fotoperiodo a 12 /12
Likes
13
Share
Hi Gromie's, well it's the end of another problem free week! Week 9 going into week 10 of veg! I don't usually veg for this long but I'm just trying to get the timing right for perpetual harvest. Plants in flowering tent were harvested & drying now for 5 days, so these girls will be transferred to the flowering tent in the next few days for the start of flowering, I've allready planted new seeds for the following grow, so just trying to get on top of the timing for everything related with perpetual growing. Thinking of setting up a 4x2 tent with a 4 inch extraction fan & filter for drying, so I can cut out around a week, that way as soon as I've harvested & cleaned the tent I can transfer plants from veg instead of having to dry in the flowering tent. Have developed really strong & thick structure's from the H.S.T & L.S.T training. Plants are nice & healthy. Performed 1 last defoliation before they go to flower as they get very bushy quickly.
Likes
67
Share
NOTE: THE COUNTING OF DAYS STARTS FROM THE DAY THE SEED STARTS ITS PROCESS, IN THIS GROW DAY 1 WAS THE MOMENT THE SEED GOT INSERTED INTO THE EASY START (i do not recomend this method for experienced growers, but higly recomend it to unexperienced growers that might accidentally damage their seedling's new root as they move them from the germination zone into their next or final pot, with easy start you can just pick up the small cube of soil and place it inside the next pot GENTLY). NOTE: For strain informations, soil recipe and nutrient's stock please do check "Germination Week" as you will find all the information there. (Do not replicate nutrient dosages as these are higly variable depending on the conditions within the grow room or tent, so you may end up damaging or killing your plants even if they are the same strain from the same breeder). --------------------------------------------------------------------___________________________________________________________-----------------------------------------------------------------------_____________________________________________________________________---------------------------------------------------------------- 03/11- All watered with 950ml of water per plant with dilluted nutrients in the rates specified above. Light schedules changed to 19/5 and will be further extended to 20/4 to allow for more hours of heat from the lights as we progress into winter. 06/11- All watered with 1,4l of water with 2ml/l Bio Rhizhotonic + 0.45ml/l of Ancient Earth. LP1- Topped + Removed first set of leaves as those were not in use anymore completely covered from light. LP2- Removed first set of leaves as those were not in use anymore completely covered from light.
Likes
5
Share
@Pblc_10
Follow
Ich hab vor ein paar Tagen umgetopft und n paar LST Clips Ran getan und hoffe das die so richtig sind😅👍 Umgetopft wurde in BioBizz allmix Lampe bei 50cm Abstand auf 35% (280ppfd) Jetzt nur noch abwarten dann Seitentriebe etwas selektieren und denn geht's auch schon in die blüte wenn alles passt👍
Processing
Likes
13
Share
@GrowGuy97
Follow
Got everything moved around & the new carbon filter, fans & lights so hopefully I got better coverage with less power👍🏼 Topped 1 of the Gelato OGs today was getting way taller than the rest we will see how she bounces back! Everything else seems to be going great! Day 22 topped & trimmed them up a bit Day 23 started LST on a few Day 24 started mainline on one of the GZ Day 25 trimmed them a little more today
Likes
18
Share
Hello! Both plants are growing well, so I'm moving them to flower early next week. Thank you for stopping by, and be healthy! 🙏 To be continued... 😶
Likes
38
Share
This week went well. They are all stretching out nicely, except for alien berries which is looking a little runtish. Pink kush did not like the nitrogen and she made it clear to me with some claws up top. She also began to really prefiere so next feed will be with bloom mutes for her. The other ladies still seem to be in veg despite showing sex already. Defoliating any large leaves covering lower growth tips.
Likes
11
Share
@Jacks_Pot
Follow
The third week started with repotting. I'm using the 14 liter (3.7 gallons) Airmaxx airpots again. The second coblamp was turned on and both lights were dimmed to a total of 132 watt at 48 cm(18.9 inches) from the plants on the first day of the week, giving a DLI of 23. 4 days later the power was raised to 140 watt and the distance was lowered to 45 cm(17.7 inches), giving a DLI of 26.5 and it stayed that way for the rest of the week. The lowest 1 finger leaves and the lowest shoots were removed on day 20. Next week I'm going to top them. Day 15, day of repotting, I gave them 200 ml of ph adjusted tapwater with Plagron Power Roots (ec 0.5 – ph 6.1) each. The next 2 days were dry. Day 18 I gave them 300 ml of ph adjusted tapwater with Plagron nutrients (amounts see above) each. The next 2 days were dry again. On the last day of the week I gave them 400 ml of the same solution they received on day 18. Twice this week I gave them a shower with CannaCure. I added 40 ml to 200 ml tapwater (ph 6) to make the spray solution. Temperatures fluctuated between 21.5 – 26.3 °C (70.7 – 79.3 °F) and humidity between 41 – 84 % That's about it for this week. To be continued... ✌️ ❤️ 😮‍💨 Do you want to grow this strain? 👉 https://www.barneysfarm.us/pineapple-chunk-weed-strain-15 👈