Elle fait de jolie étoile ⭐️ bien givrée! 😲🤤Jour 49 . J’ai récolté une j’en prendrais des photos finale du résultat après séchage. Je vais attendre encore pour le reste parce que son en pleine santé!

Got ac hehe now We r talking !!!! So since some of my girls are not stretching as much as the others, i decided to upgrade them a few inches up so that they get more light ! As for the rest, they are looking amazing and they all seem happy !!! One of my SG Clones turn out to be an Alasken Purple, and i think it's great lol Glad my friend make this mistake wen gave me clones :) Height : SG number 6 - 93cm SG numbers 2 and 3 - 52cm SG numbers 4 and 5 - 80 cm SG number 7 - 80 cm Starting to test the aptus all in one on this girl and see if i can find any diferences Alaskan Purple lol - 57cm PG - 59cm HK - 43cm WM LA1- 68cm BB- 46cm So a friend as been teling me wonders of this Aptus all in one liquid base, it's suppose to b full Bio so i decided to givit a try, i know i should wait for a new grow and test it from scracth, but again , all i grow is for myself so its ok to play like this, and if i like the results on the Super Glue lucky number 7, i'l givit a try for my next grow. let's see how it goes :) Peace Out !!! D.

Hello everyone, all good for this week 😎 They grow fast and with a beautiful green colour on the leaves! In this grow i will be testing out Plagron Nutrients and Spider Farmer SE7000 Tropicana Cookies from Fast Buds 🏝️🍪

Thestretch stopped and now after defoliation i let her go stressless

Haven't seen too much calyx formation yet, just a lot of stretching. Waiting on the purple too🧐 I've been pruning out lower branches and leaves hanging close to the ground to help keep air flowing and humidity down, especially near her stalk.

It's happening! It's going to be a high of 32C/90F and so very sunny, so why not train them today? They're both 22 days from seed as of training start. #2 got FIMmed: So I was planning on topping one but ended up choosing to FIM it instead because it's lower stress. I have no idea what will happen now. I've never done either before. I chose #2 because it seems to be having an easier time producing leaves so far. I have a video of the cut. I used a pair of bonsai shears. I was really second guessing that I actually had to cut the leaves? I missed one, and it just felt weird to go back in and cut healthy growth, even though I'd already took off most of the newest leaves. I am not convinced I did this correctly because I don't understand what happens with the tiny new node I didn't cut. We will see. #1 got LST'd: With LST, I maybe should have done it sooner. The issue is the leaves are wide enough that they would be touching the soil if I really bent it like I was planning. I even undid it and tried the other direction just to see that it was even wider across. I propped a leaf on the tie and will have to adjust it again tomorrow once the crown has righted itself. I also read that it's not good to keep them in ties once they've gone into flower for autos because it stresses them, but with two plants I had LST'd, removing the ties just resulted in them eventually straightening the stems back out. So I'll not do that again for this one. I'm also a bit obsessive about measuring my plants, and that's harder with LSTing. I have a ribbon tape measure I use to measure the main stem length instead of the actual height of the plant.

Hello growmies 👩‍🌾👨‍🌾🌲🌲, 👋 The babies start to be really unhappy in the plug, Harvested others plant, so more space, I've put them in 2l pot with plagron light mix, To start was directly under the light, I've finally shutdown the light and using the light of the right Started grow nutes. 💧 Give water each 2/3 day And vaporise plant with water + Plagron Roots (1ml/l) Vapo Water + Roots (1 ml/l) 0.3 l Water + Roots + Grow + Zym (1 + 2.5 + 1 ml/l) 0.3 l Water + Roots + Grow + Zym (1 + 2.5 + 1 ml/l) PH @6 💡Mars Hydro - FC 3000 50% indirectly under Mars Hydro Fan kit Setting 7 Have a good week and see you next week 👋 Thanks community for follow, likes, comments, always a pleasure 👩‍🌾👨‍🌾❤️🌲 Mars Hydro - Smart FC3000 300W Samsung LM301B LED Grow Light💡💡 https://www.mars-hydro.com/fc-3000-samsung-lm301b-led-grow-light Mars Hydro - 6 Inch Inline Fan And Carbon Filter Combo With Thermostat Controller 💨💨 https://www.mars-hydro.com/6-inch-inline-duct-fan-and-carbon-filter-combo-with-thermostat-controller Fast Buds - GG4 Sherbet FF🌲🌲 https://2fast4buds.com/us/seeds/gg4-sherbet-fast-flowering

Cytokinins stopped stretch so ima keep lights at current height given havent seen burn or bleaching. One pheno sharp candy getting sweeter n milder, 2nd pheno is similar to my bubba diagonal i grew here. I guess not bad for week 4 in 3 gallon bags but i hope they start filling in?

Tag 91: Die Trichome der Cosmos F1 Automatic von Royal Queen Seeds sind schon zum großen Teil trübe. Die drei Hauptcoli sind traumhaft gefärbt. Die Blüten sind sehr dick, fest und glitzern voller Trichome. Habt einen schönen Tag. 😀

Week 2 Day 2: Things are going well. We had some high humidity and a little algae, so I increased the fan level. There was also some slight bubbling in the leaves which could be due to the humidity, so I'm keeping an eye on that. Otherwise, things are looking good. Planning to water today (8/8), and keep an eye on them for the rest of the week. Feels like patience is key at this point. Will need to decide on feed schedule soon, and will be PH'ing my water for the first time today. Will also continue researching LST methods. Week 2 Day 7: Still struggling with high humidity. My grow is in my basement, and in the summer it stays around 70% RH. When the tent was at 80% RH I opened the vents and had the airflow running pretty high. I couldn’t come up with any other way to decrease it, so I went to Facebook marketplace and got a dehumidifier. Ran it overnight in the basement yesterday and the humidity has not really changed and there were barely droplets of water in it 😭. I’m going to try putting it in the tent if things don’t change.

Purple runtz

Der Topf ist unten geöffnet die Wurzel kann sich entfalten. Nach Oben ist nicht so viel Platz. Die Pflanze zeigt sehr interessante ,, Albino" Ansicht. Dünger wird verlangt. Blätter zeigten Magnesiummangel, mehr als gewöhnlich (2x in 4 Wochen) zugefügt.

Day 1- watered Day 2- 😴 Day 3- 😴 Day 4- I need to feed tent 1 tomorrow. Gonna up the nutes from last week since they dont seem to be getting caught up. Can see 1st signs of flowering so I'm gonna experiment a bit with additives and see if I can see a noticeable winner or possibly no difference at all. Day 5- Fed tent#1 14ml advanced trio, 1ml floralicous +, .6ml mammoth p. 1/8tsp flower fuel per/gal. Tent#2 got 2.5ml armor si, 5ml tiger bloom, .6ml mammoth p/gal. Pulled each plant out and cleaned up the bottoms and middles, washed trays and gave a very light dusting diatomaceous earth on underside of leaves. Hoping that will keep any spider mites that think fucking with me again this year will be fun, dead as shit and disappointed. Got a bunch of cuts for clones now too. That's gonna be tomorrow me's problem though lol. Day 6- 🚫 Day 7- well I'll be a son of a bitch...guess what I found? Spider mites. Got to try out my new eradication method I thought up months ago using diatomaceous earth and an air compressor. (Almost a week later and I cant find a mite anywhere 😁) STEP 1- Turn off your carbon filter so u dont plug it up then dust the hell out of everything with diatomaceous earth. I wanted it to look like a thick fog and let the fans blow it all around. I'd go fog it back up every 10-15 minutes for an hr or so. STEP 2- Starting with the worst, pull each plant out of the tent and blow off with 60psi (4bar) compressed air(see video) STEP 3- Inspect the plant and blow off any mites u find with the air gun. I used a LED flashlight to make it easy to see them. STEP 4- After the plant appears mite free give another dusting of diatomaceous earth.(see video) STEP 5- clean tent. Vacuum up all the DE and blow dust out of lights. STEP 6- Put plants back in the tent and start your carbon filter if u have 1. In theory this should take care of current mites and any eggs that hatch. Check daily and repeat steps 2-4 as necessary.

Creciendo fuerte y adaptándose a las podas

Every day the whole plant iis getting heavier and the buds are growing bigger minute by minute... Thank you Barney’s Farm for such a super quality of every your seed and produce!...

FOR EVERYTHING MARS HYDRO VISIT: www.mars-hydro.com www.marshydroled.ca PROMO CODE: rocknroll VISIT THE ALIEXPRESS STORE: @marshydro_aliexpress Instagram: @marshydropenny Thanks for taking the time to read and check out my diary🤜🤛 TS3000 FEATURES: WIDEBAND SUNLIGHT FULL SPECTRUM LED GROW, Infinite close to natural sun light, suit for all plants whole stages indoor growing, rapid plant response from seed to flower, achieve maximum quality and quantity, much better than traditional HPS grow systems. HIGH REFLECTIVE & NOISE FREE-Fanless LIGHT BOARDS design will make your growing life easy and quiet, quickly heat dispersing material aluminum reducing light lost to aisles and walls, increase the light intensity up to 20%, allowing your plants receive more energy and without burning your plants for maximum headroom. HIGH EFFICIENCY ENERGY SAVING PLANT LIGHT, high-power NEW LED grow, Compares to traditional 3000 watt HPS lamp and other brand led grow light while only 450 watts true output with 1016 LEDs, more scientifically and energy-efficient! Perfect for 5' x 5' veg stage, 4' x 4' bloom stage, higher intensity in a MARS HYDRO grow tent, reflective area, or by crossing over using multiple TS3000. BOOM YIELD LARGE GROW LIGHT, NEWEST SMD LED technology provide highest PAR/LUMEN output(1095.6umol/), makes you get 30% higher yield compare OLD led lights, can get max yield at 2.5g/watt, less pay but get more yield, bring a amazing grow trip to any home grower as it beams huge amounts of light energy to plants below. COMMERCIAL LED GROW LIGHT, Updated easy dimming & daisy chain function, main light controlled, especially come with two waterproof and dimmable Mean Well Drivers, auto sensing power supply works on both 120VAC and 240VAC and 277VAC, suit for Large Rooms and Commercial Setups. Low Energy-Consuming LED Grow Light: Consuming 300w and also mounted with 1016 chips, TS3000 has the ability to replace a 450w HPS light while reducing 40% power intake. High Efficiency LED Grow Light: With overall light output PPF 343umol/S as well as amazing PPE 2.3 umol/j, it's 50% even more photon efficient and can assure a 30% more return than the old HPS/MH lights. Patent Highly-Reflective Hood Shape: The reflector design on TS3000 is patented, which can effectively gather the light dispersed in all directions to enhance its light intensity as well as assist plants in absorbing more light. Full Spectrum Plants Favorite Spectra: By the unique mix of spectra that makes most light in the 400-700nm waveband, incredibly conducive to plant photosynthesis. Adequate IR(730-740nm) is additionally consisted of in the range to generate larger buds. Dimming And Daisy Chain Feature Available: Upon an independent dimming button on the external driver, backing 0-100% settings adaptation and up to 30 LEDs daisy-chained in a group, it supplies different light levels for various plant stages meanwhile saving energy. Safety Certifications And Service Warranty: CE, ETL, RoHS, UKCA security certifications accepted, 50,000 hours durability, 5-year service warranty, and local after-sales repair 5x5 GROW TENT: LOCK ALL LIGHT INSIDE MARS HYDRO Indoor Grow Tent interior is made of diamond mylar which is highly reflective. (Other brand's mylar and reflective rate is as low as 50%, won't provide efficient light. )MARS HYDRO 1680D canvas, being double stitched, it is tear proof and has perfect light locking. Mars Hydro's grow tent keeps 100% lighting beams inside and helps your plant absorb more lights. EXTRA-THICK --No light leaks or rips at all DURABILITY GROW TENT Stable metal corner adapters and poles are the trustful supporters of the tent, standing sturdy, neither rusting nor paint-falling, quick easy tool-free installation. Mars Hydro's heavy-duty metal zippers, with double layer black lining, are the best on the market which create a light-proof seal EASY OBSERVATION FOR YOUR PLANTS. Special observation windows are made by double layers of cloth. Observe the growing conditions of your plants without opening the tent and avoid disturbing plants. The observation window also serves to dissipate heat and ventilate air AUTOMATIC 6 INCH EXHAUST FAN KIT W/ CONTROLLER: Mars Hydro 6'' Inline Fan uses a mixed-flow design to maintain peak performance in a high static pressure environment. GROW TENT FAN: MARS HYDRO inline fans are designed to ventilate hydroponic grow rooms, transfer heating/cooling, cool AV closets, and exhaust odors. EFFECTIVE VENTILATION: Variable speed controller for easy fan speed adjustment. Optimal ventilation for your planting. LOW NOISE LEVEL: Durable plastic fan housing and blades for extremely low noise(32dB-A); create a truly quiet growth environment. EASY INSTALLATION: Removable duct ends with locking tabs for quick removal and easy maintenance and a cord length of 4.9 feet for hassle-free setup. This grows tent fan with a controller for easy fan speed adjustment. BASIC PARAMETERS: Ventilation exhaust fan size: 6” | Dimensions: 315mm*225mm*210mm. | Weight: 2.7. | Airflow: 402CFM | Noise: 32dB-A | Bearings: Dual Ball. 

she has a strong smell ... it takes a couple of weeks to enjoy ... she continues to fatten those buds ... a smell of mint and feels the smell of indoca to wood and earth ....

Hey guys! So, finally Saturday I chopped her down. She looked now ready and delicious, although I only notice yesterday how many seeds she has allover the place. She hermied in front of me without noticing, not good at all and need to start looking much better and in detail into the plants. Feel like an idiot now. Anyways, it was a full week! Emptied the grinder collector and pressed it down a little, makes a very nice smoke, light but pleasant, the kind of stuff it keep you going all day without the dumb effect. From all trimming made the bubble hash. Got a little too green as the 220micron bag's stitches slightly opened letting some contaminants in the final mix, hence the green color. This was a hit. in opposition to the grinder stuff, this sent me straight to the moon, really heavy stone effect, even thinking was hard. Reminded me those afghan/ moroccan balls we used to get back in the early 2000's. The weed itself it's still drying so the smoke report will be updated in there. 715g of fresh cut plant is good, let's see the potency and the seeds. Might turn it all into bubble hash, if I see it'll be an hassle to remove seeds. On an earlier bud I've cut and dried, smoked it and you can see pure white ashes in the bong. Ain't that a beauty?