update day 32.. I watered and did low stress training with parts I printed from a 3D printer.

I delayed a few days to update because the video was not loading . . . . Welcome growers We are over a month from the start with this two BLUEBERRY CHEESECAKE 🍰 The state of health is more or less the same for both, happy, with an excellent green color ⬆️ But from now on something changes, because I intend to cultivate them in two different ways Lights, nutrients and the whole environment will always be the same until the end, but, as you have probably seen in the video, at this moment one has kept the original structure and instead, with the other specimen, I have started to manipolated structure for try to maintaine all the branches approx at the same height 🌿🌿🌿 In this case topping plus a little lst (only on central stem) I only did it on one of them simply because, the larger one has more vigorous lower branches and seems more predisposed to it. I have also cut two or three leafs, not too much for now, just for increase the airflow and also again for a higher lights exposure of the lowers parts✂️ 🍃 About the lights 💡 Doing that, i have increase the potency of my two Mars-Hydro SP3000, from 25% to 50% ⬆️ The two led panel are connected with a cable and i have only to adjuste the dimmer of one of them for change the intensity of each one, in just one move.. Pretty useful 💯 In the middle of the week i have switch from 18/6 on/off to 16/8 on/off.. Always tryed to mimic the natural cycle of the sun light, works good to me 👌 Anyway.. About nutrients 👇 In this week i have giving their always organic/veganic nutrients.. A little bit of silicium (Bionova) / Activator (Biomagno) / Crescita (Biomagno) / Activera (Biobizz) / Grow vegan (Bionova) / The Missing Link (Bionova) / X-Cell (Bionova) and a little bit of P-K 3-5 (Bionova) {This last one i have used in a foliar spray solution} Like i usually do, a little bit of everything at any watering 💧 And that's all.. Another week in vegetation and then we go on flowering 🌻 See you at the end of week n°5 📆 Thank you for stopping by 😎👍 FC ✌️ 🇮🇹

Two plants are on the 29th day of flowering and the other two are on the 22nd. I started giving pk 13/14 to plants that entered their 5th week.

So far so good. Just starting out the clones.

My Bubble OG plants are looking really good. I chopped down the first one a few days ago, and it's almost dried. The other two plants are absolutely covered in buds. The tall one's a monster, totally solid and covered in crystals. And that purple plant is just gorgeous, stacked with buds all the way down. Can't wait to try them all out. The past week has been awesome for drying my plants. The weather's been perfect – nice and dry, with just enough breeze to keep things moving. I finally got around to chopping down those two big plants I've been meaning to trim. They're almost ready, just need a little more time to dry out completely. I can't wait to see how they turned out.

Still have issues with my insides/outside temps

Not much to say about this real first grow week’s start. Everything looks ok, steady growth at 40% light. I had to restart the control app a few times, therefore the broken graphs. At night times, the control software tries to attain optimum humidity rather than optimum VPD. That’s why VPD is dropping when the lights are out. CO2 is back to baseline – really wonder what the reliable values are … I found I have to silence the blowers when a timelapse photo is being taken. The shaking you see at the beginning of the grow video should not appear, or to a much less degree, in the future. Day 13 (July 30th) shows good, steady growth. Leaves are a bit spotty, although less then the processed images show. Something to be worried about? I would not currently … All are developing their 3rd nodes now. The controlling Raspberry Pi crashed last night when I tried to access it remotely … ;( – looks like the Connect software is in need of an update. The leaf temperature sensor is now really aimed at lady-to-be nr. 1’s leaves. Nothing to change that I see. I won’t cut the top yet, just watered the outer circle of the big pots slightly to encourage root growth. Day 14: Nice growth. First plant is now at 11 cm, and at 12 cm on day 15. Nothing special to report so far, except for I had to move the internal camera a bit upwards to keep little lady #1 in focus. Day 16 and last day of this week (Aug 2nd): The young ladies are now at about 14 cm tall. Growth looks very compact though. I think the two inside girls will lose their heads next week; I’d still prefer to have one or two more nodes available. Pictures of this day are taken at the end of the plants’ day. Notice their leaves are pointing upwards, which should be a sign that they want more light. I turned the lights up by another 20% for a total of 60 W now. Weather was pretty hot the last days so it wasn’t possible to stay in optimum VPD range but as long as growth is this satisfying I don’t mind. I will water them slightly at their next day start. Outside plant’s soil humidity might still be at around 58% officially, but drying starts at around 40% with this measurement and the sensors are placed quite closely to the stems so outer soil is dryer. I am preparing the plant water with some additions and a frequency imprint suing some Solfeggio and Schumann frequencies.

Scrooge has bounced back after the trim, looking much improved. It's also showing more active feeding. I've started watering it separately and keeping a close eye on its progress. 🌿💧 Keep up the good work!

Bonjour les amis. Cette semaine le stretch a bien démarré et est bien sensible 😻. J'espère qu'il sera limité, mon placard est petit. Aucune odeur pour l'instant. La plus petite des 3 plantes fait 15 cm de haut. Les 2 autres font 29 cm et développent plusieurs têtes. Pour l'instant tout va bien. À bientôt 👋

Marshydro lo mejor en luz una buena invercion. Este cultivo es sólo con agua 6.5 a 7 Ph.

A few days late with the update but the pics and recording is from day 42 of flower

Hello everyone. The last week before harvest. . first time i've had a girl like this grow up. It's interesting, quite strong and tasty.

* Day 46 * 3 out of 5 are flowering * Moved #1 to the 3x3 with SE3000 * Grow Big and Tiger Bloom * Smelling fruity and sweet

Buenas tarde familia, actualizamos el diario de las skunk de Zambezaseeds, y es que estoy tan sorprendido , es una cepa que produce flores muy muy compactas, sigue floreciendo con lo cual sigo regándolas solo agua ajustando el ph a 6,5 . Temperatura y humedad dentro de los parámetros, 1/3 anda algo sobre fertilizada de las últimas semanas las 2/3 están como la seda , aún así todo pinta fenómeno tengo muchas ganas de cosechar y probar esta variedad y ya queda menos , pasen buen finde semana fumetillas.

Goodmorning growmies, Rapier is starting to show some beautiful purple coming from her buds! She is done stretching, she only grew 5 cm this week.. cant wait 2 see her flowers, she has been standing in safehouse last days bc of wet and chilly weather.. and i guess we all know purple loves a bit of chill.....😍👍 I can already smell her, guess the hedgehogs cant wait to get their hair purple!😎👌 Happy growing for all✊ KISS! growing technique: KeepItSimple. Stupid!

02.10.2022 - 56 days since my little girl sprouted from seeds🌱 The fourth week of flowering of my Mandarine XL 🍊🍊🍊 Nutrients: Jungle Indabox - I serve the same as last week Advanced Nutrientiens - Bud Candy - carbohydrates for my plants 🍭🍭 Building Stimulators 🌼🌼🌼: Jungle Indabox Environ X Advanced Nutrientiens - Big Bud - I applied this week for the last time ATAMI - ATA CALMAG - When growing under LED lights it is recommended to use Calmag and Atami is an excellent brand The plants tolerate the nutrients well, some of the lower leaves showed slight signs of burning, they turned a little yellow and the tips of the leaves were brown 🍃🍃 Therefore, I will continue to use only one Bud Stimulator and that - Jungle Indabox Environ X, I will leave Big Bud from Advanced Nutrientiens for other plants. Training: Defoliation: I still remove the large and lower leaves so that they do not shade themselves 🌞🌞 I'm not planning a bigger defoliation until next week, the girls are a little leafy, but not enough to need more trimming 🌴🌴 General: The girl is already blooming strongly, dense buds are forming 🌸🌸, the branches reach the same height, exactly as I wanted 👍 At the moment it has more leaves than I would like, but I will do more defoliation later, as I wrote 🍃 I will adjust the nutrients from the next watering, I will leave the only bud stimulator 🏵️ 🏵️ The girl no longer grows tall, she puts all her strength and energy into her buds 🌸 Light: Believe - the best light of sponsor Mars Hydro TS 1000 💡💡 Smell: The whole box already smells a lot, the smells mix and flow out of the box, when I open the tent, I get a strong smell of flowering cannabis 🍋🍊 Thanks for your opinions, smile and fun with my diary, you can follow me on Twitter 🐦: @targona666 See you soon 😍

Sponsored grow 👉WeedSeedsExpress👈 Week 14 flower 10 Love Potion is in her last week. I am watering with ph 6.5 water with no nutrients and I have lowered the lights to 20%. I plan on putting her in the dark on Thursday for chopping on Saturday. Trichomes remain mostly milky. I saw a few ambers in 1 pic taken on 4/6. Last peek pictures on 4/11. Your likes and comments are appreciated. Thanks for stopping by. Thank you @WeedSeedsExpress for this opportunity to grow your strains. Growers love 💚🌿 💫Natrona💫