It's a shame my ventilation system came in a month after I grew mold but at least I can make some brownies with about 25 grams of some pretty dank bud.

Just harvested last night so will come back on in next couple of week to review!! No estimates on yield as yet. But the smell is definitely pungent lemon and sweet smell. Can’t wait to try the end product!!

I've been pulling the top small fan leaves to allow the side's to catch up. One plant is really tall and stretchy , One plant is very short and compact . The other 4 plants all look very similar to each other at this stage .

ploughing on ahead this week , i have removed some lst ties from each plant . focusing on leaf tucking . Since we are now in flower. I did a little defoliation for the topped crinkle to remove bud sites that would not reach the canopy . otherwise these have not been stressed at all it seems , ive only leaf tucked and lst , more pics coming soon we are at full power - 200w . thinking of upgrading

All ready for 12/12

Week 10. Not much to say again. She grows more. Training is getting harder for me as branches are more mature and harder to bend without feeling like they may snap. I've come too far to risk breaking her now. I will do slight adjustments each day over the week to get the shape I want and fingers crossed she will take it. Feeding is still just some N and once a week some P and K along with her soil improvers. I've managed to do all my autos with out the need for Cal mag but this lady is asking for some. So will introduce some Cal mag this week. The 4 tops I took off her previous topping are all rooted and potted. So I have 4 clones of triple cheese to try and schedule into what is already an over crowded space.. ah well. Fun fun fun. Day 66 After she had her tops taken I thought she would need to rest but she pushed another 4cm of growth on about 5 of the 16 colas. The canopy height difference between highest and lowest cola was around 15 cm. I decided to put her through some more torture and now the canopy is flat(er) around 5cm difference now which I can live with as I feel I can level bits out as new growth pushes. I will try and take her shape out wider rather then higher for now but again I will see want she wants to do and hopefully we can come to an agreement 😊. She will spend the next 5 days to herself eating drinking and living the good life. Thanks for looking. Stay safe.😷 Happy grows to all👍🌱🌿🌱

3.4. - Watered 💧 6.4. - Watered 💧 also flushed all Banana Purple Punch. 3.4. - 9.4.2025

Bambi and Susan have been hung to dry. Veronica still has a bit of time to go!

So week 2 was a bit of a fuck up, I think. The scrog went into flower and by the end of week 1, it was looking far to busy and leafy, zero light was getting through so I decided to thin down a little. Also I wasn't happy with how the scrog was over developing, so I took away the net and allowed them some free growth and little more spread across the canopy. I think this work stressed them a little, who knows?? Ideally I should have given them a far more comprehensive prune a week before flower, alas I didn't so here I am. This weekend will mark 3 weeks of flower, and apart from the prune I've seriously left alone and will have for a couple weeks, so this weekend they will get some serious defoliation and probably a few straggler tops will be removed to thin down a little. After this weekend, again, just feed and monitor. So looks like I was just being a bit of a drama queen, the plants are doing superbly as I near wk 3, lots and lots of colas. I will be thinning these as needed whilst I prune by taking out any stragglers. I've also added back in some boost nutes just to help overcome any stress I may have caused. I've also raised the lights slightly to reduce stress at this important stage. Last one for this week, all plants fully defoliated which I'm stoked about, no problems, I think I'll need the odd support cane since a binned the scrog, but apart from that not much else left to do other that monitor all aspects to make sure of no silly mistakes.

Alright so we're moving along as best we can with some weird looking growth but it's still growth lol. We started the Athena blended line this week but it's still early so we'll see how they look after this week. I'm hoping they grow out of this weird looking foliage. Other than that we're doing great and in a couple more weeks we'll transplant the photos and put them in flower.

FOR EVERYTHING MARS HYDRO VISIT: www.mars-hydro.com www.marshydroled.ca PROMO CODE: rocknroll VISIT THE ALIEXPRESS STORE: @marshydro_aliexpress Instagram: @marshydropenny Thanks for taking the time to read and check out my diary🤜🤛 TS3000 FEATURES: WIDEBAND SUNLIGHT FULL SPECTRUM LED GROW, Infinite close to natural sun light, suit for all plants whole stages indoor growing, rapid plant response from seed to flower, achieve maximum quality and quantity, much better than traditional HPS grow systems. HIGH REFLECTIVE & NOISE FREE-Fanless LIGHT BOARDS design will make your growing life easy and quiet, quickly heat dispersing material aluminum reducing light lost to aisles and walls, increase the light intensity up to 20%, allowing your plants receive more energy and without burning your plants for maximum headroom. HIGH EFFICIENCY ENERGY SAVING PLANT LIGHT, high-power NEW LED grow, Compares to traditional 3000 watt HPS lamp and other brand led grow light while only 450 watts true output with 1016 LEDs, more scientifically and energy-efficient! Perfect for 5' x 5' veg stage, 4' x 4' bloom stage, higher intensity in a MARS HYDRO grow tent, reflective area, or by crossing over using multiple TS3000. BOOM YIELD LARGE GROW LIGHT, NEWEST SMD LED technology provide highest PAR/LUMEN output(1095.6umol/), makes you get 30% higher yield compare OLD led lights, can get max yield at 2.5g/watt, less pay but get more yield, bring a amazing grow trip to any home grower as it beams huge amounts of light energy to plants below. COMMERCIAL LED GROW LIGHT, Updated easy dimming & daisy chain function, main light controlled, especially come with two waterproof and dimmable Mean Well Drivers, auto sensing power supply works on both 120VAC and 240VAC and 277VAC, suit for Large Rooms and Commercial Setups. Low Energy-Consuming LED Grow Light: Consuming 300w and also mounted with 1016 chips, TS3000 has the ability to replace a 450w HPS light while reducing 40% power intake. High Efficiency LED Grow Light: With overall light output PPF 343umol/S as well as amazing PPE 2.3 umol/j, it's 50% even more photon efficient and can assure a 30% more return than the old HPS/MH lights. Patent Highly-Reflective Hood Shape: The reflector design on TS3000 is patented, which can effectively gather the light dispersed in all directions to enhance its light intensity as well as assist plants in absorbing more light. Full Spectrum Plants Favorite Spectra: By the unique mix of spectra that makes most light in the 400-700nm waveband, incredibly conducive to plant photosynthesis. Adequate IR(730-740nm) is additionally consisted of in the range to generate larger buds. Dimming And Daisy Chain Feature Available: Upon an independent dimming button on the external driver, backing 0-100% settings adaptation and up to 30 LEDs daisy-chained in a group, it supplies different light levels for various plant stages meanwhile saving energy. Safety Certifications And Service Warranty: CE, ETL, RoHS, UKCA security certifications accepted, 50,000 hours durability, 5-year service warranty, and local after-sales repair 5x5 GROW TENT: LOCK ALL LIGHT INSIDE MARS HYDRO Indoor Grow Tent interior is made of diamond mylar which is highly reflective. (Other brand's mylar and reflective rate is as low as 50%, won't provide efficient light. )MARS HYDRO 1680D canvas, being double stitched, it is tear proof and has perfect light locking. Mars Hydro's grow tent keeps 100% lighting beams inside and helps your plant absorb more lights. EXTRA-THICK --No light leaks or rips at all DURABILITY GROW TENT Stable metal corner adapters and poles are the trustful supporters of the tent, standing sturdy, neither rusting nor paint-falling, quick easy tool-free installation. Mars Hydro's heavy-duty metal zippers, with double layer black lining, are the best on the market which create a light-proof seal EASY OBSERVATION FOR YOUR PLANTS. Special observation windows are made by double layers of cloth. Observe the growing conditions of your plants without opening the tent and avoid disturbing plants. The observation window also serves to dissipate heat and ventilate air AUTOMATIC 6 INCH EXHAUST FAN KIT W/ CONTROLLER: Mars Hydro 6'' Inline Fan uses a mixed-flow design to maintain peak performance in a high static pressure environment. GROW TENT FAN: MARS HYDRO inline fans are designed to ventilate hydroponic grow rooms, transfer heating/cooling, cool AV closets, and exhaust odors. EFFECTIVE VENTILATION: Variable speed controller for easy fan speed adjustment. Optimal ventilation for your planting. LOW NOISE LEVEL: Durable plastic fan housing and blades for extremely low noise(32dB-A); create a truly quiet growth environment. EASY INSTALLATION: Removable duct ends with locking tabs for quick removal and easy maintenance and a cord length of 4.9 feet for hassle-free setup. This grows tent fan with a controller for easy fan speed adjustment. BASIC PARAMETERS: Ventilation exhaust fan size: 6” | Dimensions: 315mm*225mm*210mm. | Weight: 2.7. | Airflow: 402CFM | Noise: 32dB-A | Bearings: Dual Ball. 

After germination i putted into a 200 ml plastic cup and watered only with water, 20 ml/day. Day 1 = 20ml water Day 2 = 20ml water Day 3 = 20ml water Day 4 = 20ml water Day 5 = 20ml water Day 6 = 20ml water Day 7 = 20ml water

This time, the cold wind has arrived. Keep the temperature at 20 degrees at night and 28 degrees Celsius during the day, which is good when your plants start to flower.

Se da fin a este cultivo de 2 variedad en carpa de 80x80 por 240w. La primera variedad ya en proceso de curado es la Green crack punch (5plantas) tuvieron buen crecimiento, pasaron por 2 transplantes ( 3lt a 7lt) muy rico sabor se llega a sentir los terpenos de cada cogollo. No es todo, en este mismo espacio nos quedan aun las 4 powerFlower, las cuales estos dias se iran de corte para preparar el secado y posterior curado. 5 Green crak punch

#3,#4→Growtent(60☓60☓120),MarsHydro TS1000 #1　Day16　Biogrow×1000(500ml-0.5ml) #1　Day20　Re-pot #2　Day16　Biogrow×1000(500ml-0.5ml) #2　Day20　24H　Re-pot　Topping #3　Day17　18/6　Topping #4　Day14　18/6　Topping #4　Day20　18/6　BioGrow / ☓1ml　1l

She remains pale, but she's seems very healthy. Buds forming now. Increasing the nutrients.

The plant is thriving as it enters its 11th week of flowering. The buds have developed beautifully, and they’re giving off a sweet, lemony aroma that fills the grow space. It’s a scent that’s both refreshing and promising, making me excited for the final product. At this stage, everything looks great, and I’ve decided to start flushing the plant with clear water only. This should help remove any residual nutrients and ensure a smoother, cleaner smoke. I’m planning to continue flushing for the next one to two weeks before harvesting. I’m really looking forward to seeing how this plant turns out. The buds are dense and sticky, and if the smell is any indication, the end result should be amazing. Can’t wait to see how she finishes!

Didn't train this nearly enough as I should have, growing vertical instead of horizontal like I would have liked.

They are an amazing plant to work with easy and robust they love the inviroment and are starting to smell amazing combined with the lights and climate control its a breeze don't have to do nothing the un topped one is a monster 3.5 ft hopefully fill right out thanks fast buds 💕