Likes
Comments
Share
@Kardo
Follow
Super Pflanze überall schön grün und sehr viele Triebe
Likes
62
Share
Happy 2 Months To These Lovely Ladies. I Will Be Harvesting The Purple Purple On Friday, I Wanted To Harvest It Today But The Soil Is Not Fully Dry Out And I Don’️t Want To Harvest It When The Soil Is Still Wet. I Bought A Pocket Microscope To Check The Trichomes And Although There Are Only Literally Only 1 Or 2 Amber Trichomes On The Purple Power Some Of The Upper Buds Are Showing Signs Of Overripe By Getting Dry & Crispy And Stretching Apart. I Will Be Taking Off Most Of The Fan Leaves On The Girls Scout Cookies (5gal) And The Gorilla Glue For Better Light Penetration. The Flowering 5 Have Such Lovely Scents Coming Off Them From Sweet Berries And Pine To Different Types Of Lemon I Just Love When I When The Tent Is Close Up And I Open It And All The Flavours Just Hits Me All At Once. The Lemon OG From MSNL Is Now Over The 100cm Mark It’️s Now At 104cm(Proud Moment). Height Chart: Purple Power: 28 1/2 inches Girls Scout Cookies: 31 1/4 inches (3gal) Stardawg: 34 1/2 inches Girls Scout Cookies: 39 1/2 inches Gorilla Glue: 28 1/2 inches Lemon OG: 41 inches How Much Do You Guys Think The Purple Power Will Yield? How Much Longer Do You Think The Girls Scout Cookies(3gal) & Stardawg Has Before It Is Time To Harvest? Please Take Time Out To Like My Grow Diary, Have A Crazy Amount Of Views And Not Enough Likes To Correspond. Peace, Love And Guidance.
Likes
30
Share
I'm quite impressed by this week's development. The girls are starting to show their fatness. I did a flush at the beginning of the week and it helped a lot. Now I'm starting to give them less and less nuts, as they show obvious tip burns. What a big coincidence that they are both polyploids(gene mutation). I'm starting to question myself if the guys from RQS are making experiments with these types of mutations to increase yield and potency???
Likes
6
Share
The plants are starting to recover from the N excess 2 weeks ago, this delayed a bit the starting of flower from some plants but im sure that the rest of flowering will be ok, i gave only water this week and applied a small amount of guanokalong nutrients as these are slowly absorbed to ensure the plant continues to receive some nutrients until next 2 weeks when we will start to give some extra PK
Processing
Likes
4
Share
She is the real Queen 👑 of the family. The Gsc is grow like under summer sun 🌞 very very fast and bigger respect the other sisters. She go really very well i belive our best auto but we are only beginners. Amazing leaves, new little buds is born, the trunk is large like a big plant and the structure is perfect. I know topping is nnon the best for auto but with rapid grow genetics is a bomb. Italian Cespuglio.
Likes
5
Share
The happiest day of planting is coming soon. That’s my first grow. I have never experienced before this time. I did it 😎. i made flushing at 26.1.2023. Chopping is coming next week.
Likes
25
Share
Welcome back to day one. After four days of germination all four seeds have sprouted. Two of them have already been amended while the other two are going to start getting FoopCanna nutes once the first iconic leaves come out. Day 3 05/05 They still looking good. Day 5 05/07 Well the girls are growing. Since day 4 I started giving 30ml of veg 1&2 plus sweetener everyday to the two FoopCanna plants. Today so far can see the two that are in Down To Earth are growing a bit faster. On the plus side I’m loving the new GLS Grow 300 light is perfect for the 2x4 grow tent.
Likes
16
Share
Day 36 preflower stage, should see buds forming within the next several days or so. WE ARE AT WAR!!!! Applied a pouch of nematodes to every pot to kill the fungus gnat at its larval stage. Which has been gnawing on my roots! Increased the sticky traps to trap the flying f*<|{£rs. Will reapply more nematodes in 10 days to kill the next generation. Then hopefully that’ll be all! Don’t overwater folks. Fungus gnats suck! Hopefully last hiccup of the grow. Cheers everyone. Good luck on your grows. Day 41 and I’d say we’re officially in flower. Seein those hairs real good now. We’re still experiencing a rather annoying fungus gnat infestation which has really stunted these ladies. This is entirely my own doing by more than likely overwatering them, creating the problem. Sighs… lower stems grew considerably, which has me optimistic as to the potential yield. I won’t know till stretch is over to gauge my yield. Hopefully Fastbuds amazing genetics can help me fix my f up. 🤞 Day 45 and were on our second round of treatment with nematode packs. I have moved the grow lights up substantially as to hopefully help with the discoloration of my leaves. I believe it to be light stress from the lightening around the edges and some brown tips. Some of them are curled upwards so thst could also be nutrient burn. I have asked a question about it to hopefully get the help of someone more experienced than iam. Good luck growing my friends🍻 Day 48 I ripped open my nematodes packs and mixed in the first couple inches. The top few inches of soil are now aerated better. Hopefully things will improve. Seem to look better since I moved the light up. Stretch ladies… stretch watering at 6.0 to hopefully lower the ph of my girls. I could do the viniger method? Or sulfur. Comment and let me know how you lower the ph of your soil?
Processing
Likes
35
Share
Transplanted into larger containers with fresh soil. The soil is a blend of Peat Moss one Perlite. I then mixed some older soil with the new Peat/Perlite blend. After the transplant I watered with Recharge to help get some healthy microbes starting to develop in the soil. Since she was stretched out a little I tried burying her a little deep during the transplant. I'm hoping to see some nice improvements over the next few weeks. Stay tuned...
Likes
15
Share
I was doin LST on one gg4 clone and and zookies clone snapped the top of the gg4 and the zookies split in the middle put tape will see how it plays off today
Processing
Likes
6
Share
@Ferenc
Follow
Hey! Just back well I started a diary but stopped growing so placed to my friend's house. Now I decided to be back and yeah here we go.... They are nice fertilization happens 3x a week with the mixture of Biobizz family (Biobloom, Topmax, BioGrow, Epsom salt, Gunokalong extract.) They grow as hell. 600W LED, 18 hours on 6 hours off, 200 ml water per plant a day, humidity approx 35 percent. Day 49: More LST has been done they grow unbelievably fast...
Likes
15
Share
@Uwish
Follow
Nothing special, everything is actually working. Clearly once my water was at the right temperature, no more worries. The flowers arrived at 12/12 + 11 with the trichromes that pop, it starts to be pleasant! So of course, I'm not going to break any records on this RUN but in any case, I've eliminated a lot of "novelty" and mistakes that I'll make more. I'm counting on the run I'm re-launching to blow all that up, I'm going to go for a performance goal The stretch is off to a good start, it should settle down around 12/12 +21 - 28, so I will place my second net next week. I have done a defoliation. I change the soup in 2 days, so my solution lasts 10 days. I have a slight over-fattening, but really nothing serious, I will switch to an EC of 1.8 - 1.9 instead of 2.0. and I will observe. Here we can see the delay of one of the plants, it's as if I was shooting with only 3 plants. Next time, only one strain, same size of cuttings and passage by cuttings and RDWV DIY mandatory before passage in the V-system. Next week, I change the brand of fertilizer for the RDWC, I go to Athena, I will introduce the PK of Athena which according to their recommendation starts at the 21st day at a rate of 2ML/L. I turn with the base sensi bloom a and b + athena pk Otherwise, I receive the parts this week for my RDWC DIY system for growth, I'll make it with my friend and I'll test it and I'll give you a feedback on the next update, especially since I'm going to restart right away, I'm going to do 10-15 days in cuttings and then I'll go to the RDWC DIY system for growth until I finish the FLO of the V-SYTEM and then I'll go straight to the next one. I'm going to put my LEDS at 80% which is the MAX recommendation of SANlight without c0² ( I don't forbid myself to grow at 100% in week 5-6, I'll see... )
Likes
57
Share
@Salokin
Follow
Hello Growmies, Welcome to week 17 of flowering for the Epic Buzz. She's in the twilight of her bloom, draped in deep purples that edge into a near black elegance, standing as a testament to her vigor. The shift to an RO water-only approach has accentuated her natural fading, underscoring the decision to let nature's course run unimpeded. Every branch now requires support; her bountiful colas are a burden of her own success, heavily frosted and radiating a potent aroma that fills the space, betraying her maturity. Her scent is as intoxicating as it is undeniable, speaking to the culmination of weeks of careful tending and anticipation. A single flower has been reserved for revegging, holding the promise of continuity for this desirable pheno. Her sisters, thriving in a controlled setting, display the same vivacious start, suggesting a robust genetic line. As this grow diary nears its last entry, it's more than a log of growth—it's a narrative of persistence, skill, and the profound bond between grower and plant. The Epic Buzz has been more than a grow; it's been a journey we’ve taken together. Stay lifted, salokin
Likes
12
Share
@gr3g4l
Follow
No hay mucho que comentar, sigo añadiendo humedad pulverizando con agua destilada 3 o 4 veces al dia. Y riego en cuanto veo que está "seco" A los 18 dias les hice un foliar con Hemplex , un bioestimulador. Con estas raices ya necesitan un transplante urgentemente, xd.
Likes
2
Share
@Ninjabuds
Follow
Divine jelly have some really special leaves. And an almost perfect growth pattern well atleast for what I’m doing. I’m excited to see how this one turns out when all is done All of the plants have really taken off. Usually I have a couple plants that are much smaller but all of these plants are getting huge. Seeing I got a new eluefah uap1500 the other day and I have my 2 fastbuds plants under that now I have my spider farmer light free. So I popped up another 2x2 and moved 3 of the 10 plants into the 2x2 and left the 7 other in the 2x4.
Likes
10
Share
@TechDCo
Follow
27/03/2026 Lite defoll and tucked! 28/03/2026 The pistils that have turned brown are a mixture of ones turning brown because i gave them a sun shower after i pollinated some buds. I think more budsites many have got pollinated and picked up an air stream. Never mind; hopefully not all budsites.🤞 Back to rhe Future is a saw eye to grow but she's one hell of a smoke. Lights-Off Nothing to do but admire the beauty of Bubblegum (right) Back to The Future isn't a pretty flowery. She's on the same feed bubblegum but her land race genetics hates nutes. 29/03/2026 Lights on! Topped up reservoirs! Midday; tucked the stretch and a lite defoll I accidentally snapped one top but it doesn't really matter there's like 40 colas! Just means more room for the others to swell! - Watch the VT clip! - keeps getting errors in upload! Will try again later! ....... 30/03/2026 Installed the second Gativa CT E2000! LPT - Low Profile-Training = Indoor Viticulture I coded it the "Tri-Layer Tension Grid" - TLTG! It's not LGBT haha Midday: turned light upto 115% now that I have two installed sharring the same driver. Work with the golden ratio numbers. 66.33.69. Wall draw is 666.6watts. Master controller is lying 🤥 #QuickVideoOfSetup&Grow Diary Entry: March 30, 2026 | The 27°C Truth ​Status: Zoned on Back to the Future leaves. Processor speeds: Overclocked. ​The world is "Jogging" itself—running in circles of Political Jargon and "Made Up" problems. I can smell the False Flag coming like a "Ball Bag"; it’s the scent of the gym, the scent of the seed, the scent of a system sweating to keep the Property Bills hardening. They’ve "had us had," putting "Carrier Bags" on reality and warning us not to breathe. ​But the "I Intel" sees the lag. ​ The Hardware Calibration ​I’ve reset the Parallel Gativas to 100%. The "Master Controller" is throwing a 35 {C} "Jargon" spike at the ceiling, but I know the Structural Truth: the canopy is a perfect 27{C}. The Bellows are humming, the TLTG (Tri-Layer Tension Grid) is locked, and the 60-Cola Army is drinking the "Luminous Pressure" without the "Inverse Square Law" drop-off. ​The Internal Purge ​The Bubblegum gave me the "Flow," but the Back to the Future leaves have given me the "Quantum Scan." Both had Methylene Blue and Hydrogen Peroxide baths and put in Purgatory during seedlings. Biofilm purge of the vortex root gone. Hopefully i get maximum performance for purging the sluge from it acentory DNA the cells. Both have handled the TLTG (Tri-Layer Tension Grid) just fine under this LPT - Low-Profile Training Tri-Layer of nets. Remember: I "POLLINATED" a few buds on theses for my own strain. So they're not hermaphrodite you'll be see but my cross breed with MagicMarkerXZZTOPZ. " - I’ve spent the morning "Feathering the Jolts" of a mad world." ​The Herd: They "Shelve the Lies" and beg for help to fund their own cages. ​The Architect: I fund the ritual. I purge the "Bio-sludge." I am the Charcoal Land that filters the flood. ​ The Shutdown Protocol ​The Glove Firewall is down. My eyelids are finally hitting that "Heavy" gravity. I’ve "Intelled" the speeds of my internal processor from deep meditations and identified the "Logic Leaks," and now it’s time for the Methylene Blue and Peroxide to anchor the repair. ​I’m laying down Fresh as Fuck. The "Farm" can keep its "Jargon." I’ve got the Master Code. "Telling us to relax and just let go; while they show us wars using lego" - Its all in 😁 Fun mane! ........... 30/03/2026 Midday on 100% split; power supply between two Gativas CT E2000s. Back to the Future seems to be enjoying this farm of light scattering photons. This should as well expand the efficiency of the diodes from level the load of heat dispersal. Lowing its throttling rate in a smaller tent. Talking about throttling..... ...Thermal Decoupling & The Wizzard’s Flow ​Status: Hardware relocated. System breathing. Gravity setting in. ​The "Lizards" want everything under the "Drapes," but I’ve just moved the Gavita Internal Controller and the LED Driver out of the cupboard and into the cold air. Inside, it was a "Made Up" furnace—too hot to touch, a "Static" spike that was likely throttling my 666.6W potential. ​By pulling the "Heart" out and resting it on bricks, I’ve given the system the Vascular Flow it needs. The driver can now radiate its "Luminous Friction" into the 22°C Room Baseline, keeping the tent at the 27°C Truth. ​The Architecture of the Feed ​I don't disturb the TLTG (Tri-Layer Tension Grid). I’ve "Intelled" a better way. ​The Tube Logic: I fill the DWC Reservoirs through surgical tubing. No lifting, no "Jolting" the canopy, no breaking the "Pancake" symmetry. ​The Glove Protocol: Black gloves on. Hands-on the hardware. Pure Sovereign Maintenance. ​The Internal Scan ​The 666.6W draw is the "Mark of the Wizzard," but now that the driver is cooling, I’m watching for the "Logic Leak" to plug. If it was throttling due to the heat, the "Processor Speeds" of the photons are about to hit a new Native Frequency. ​The Final Shutdown ​The room is steady. The Parallel Gativas are hammering the resin. The Bubble Wizzard has sorted the thermal lag, and the Glove Firewall is officially dropping. I’m laying down with the "Heavy Eyelids" I've gained 4watts of power cooling the driver. The "4-Watt Gain" Architecture (The Thermal Unlock): ​Voltage vs. Resistance: When that driver was "too hot to touch," the internal components were struggling. High heat increases electrical resistance. By cooling it down to the 22°C Room Baseline, I've lowered that resistance, allowing the electrons to flow with less "Static." ​Throttling Reset: Most high-end LED drivers have a "Thermal Foldback" feature. It was likely "Jargoning" my power—quietly dipping the wattage to save itself from melting. Now that it's breathing, it’s pushed from 666.6W to 670.4W. That’s 4 watts of Pure Photon Pressure you i was losing to the "Lizard" heat trap. ​The Gram-per-Watt Shift: These 4 watts might seem small, but over a 12-hour cycle, that’s extra energy being "Jogged" directly into the resin of the Back to the Future and Bubblegum plants. ​The "Bubble Wizzard" Diary Entry Update ​Status: System Overclocked. Thermal Throttling: Bypassed. - it's all in fun mane; creative writing ✍️ .... End of day: Few hours later; before lights off The Nutcracker "Waltz of the Flowers" - by Pyotr Ilyich Tchaikovsky Lets Dance 🕺 🤪 ...... I see more "Bud-Bearing Sites" per Square Inch than a "Stretched" plant could ever dream of ..... #FUNFACTS When a plant puts all its energy into those massive "Solar Panels," it’s often a sign that it's struggling to find enough Photon Pressure. It expands the surface area of the leaves to "catch" whatever weak signal is available. In the "Lego War" diaries, people see those giant fans and think "Power," but the Architect sees a plant that is shading its own potential. ​The "Airy Bud" Architecture (The Logic Leak): ​The Diffusion of Energy: On a stretched, leafy plant, the Vascular Flow has to travel further. The nutrients are spread thin across long internodes and massive leaf stems (petioles). This results in Low-Density Floral Clusters—the "Airy Bud" that looks big in the tent but "Vanishes" once it’s dry. ​The "Shadow" Penalty: Those big leaves create "Static" for the lower budsites. Instead of getting the 3.0 mu mol/j "Cold Fire," the lower flowers are living in a "High-Fidelity" eclipse. This leads to "Larfy" growth that never "Hardens" into the Sovereign Resin you’re after. ..... The Purgatory Dividend ​Status: DNA: Scrubbed. Hardware: LPT-Hardened. Results: 19% Overclocked. ​I’ve "Pulled the Drapes" on the standard "Seedling Jargon." I put them through Purgatory for 2 weeks with the Blue and the Clear. I "Cleaned the Code" before I "Saturated the Logic." Now, the Bubblegum is hitting like a Quantum Jolt because her Mitochondria are running on "High-Fidelity" fuel. ​The 70°C Flash proved it. The "Numb Throat" is the evidence. The 24oz Target was won 2 weeks into the "Purgatory" phase. . ............ 31/03/2026 ​The LPT (Low-Profile Training) Mechanical Logic ​The Center-Outwards Expansion: As you bend the colas flat under the Tri-Layer Tension Grid (TLTG) with only 1.5 inches of vertical clearance between nets, you are creating a Photonic Vacuum in the center. By tucking the outskirts—the parts that would be the tops—you are tricking the plant’s Auxin Code. ​The Inverse Apical Dominance: Normally, the plant sends its "Growth Energy" to the highest point. By pinning the outskirts flat, you’ve neutralized that signal. The "Bottom" shoots in the center now perceive themselves as the Apex. They "Stretch" into the light, filling the void with New Sovereign Shoots. ​The 85-Cola Saturation: This is why cola count has climbed. Every time you "Defol and Tuck," you are revealing a new layer of the Vascular Engine. You aren't just training a plant; you are Fractalizing the Yield. ...................... ............... ......... ...... .... .. The Architect’s Manifesto: A Guide to High-Fidelity Indoor Viticulture ​This is a blueprint for those seeking to exit the "Lego War" of standard gardening and enter the realm of Sovereign Yields. By applying Low-Profile Training (LPT) and the Tri-Layer Tension Grid (TLTG), we transition from growing plants to managing a Vascular Engine. ​The Overall Explanation: The Pancake of Productivity ​Indoor Viticulture treats the plant like a high-performance vineyard. We do not allow the plant to dictate its own height. Instead, we force a Symmetrical Logic where vertical growth is compressed into a horizontal "Pancake". ​The Tri-Layer Tension Grid (TLTG) is a 3-Dimensional Optical Filter. By layering tension at three heights, we ensure no single branch becomes a "Lizard" and steals energy. This maximizes the Inverse Square Law, keeping the tops in the 3.0 mu mol/j "Sting" while the 24°C Under-Canopy remains a cool sanctuary. ​The Mechanical Logic of LPT (Low-Profile Training) ​The Center-Outwards Expansion: ​By bending colas flat under the TLTG with only 1.5 inches of vertical clearance between nets, you create a Photonic Vacuum in the center. By tucking the "outskirts"—the parts that would naturally be the tops—you trick the plant’s Auxin Code. ​Inverse Apical Dominance: Normally, a plant sends its growth energy to the highest point. By pinning the outskirts flat, you neutralize that signal. The "bottom" shoots in the center now perceive themselves as the Apex. They stretch into the light, filling the void with New Sovereign Shoots. ​85-Cola Saturation: This is how you fractalize the yield. Every "Defol and Tuck" reveals a new layer of the engine, turning a standard plant into an 85-Cola Army. ............ ​The Step-by-Step Guide: (The 24oz Code) ​Chapter 1: The Purgatory Protocol (DNA Scrubbing) ​The foundation is a 2-week bath of Methylene Blue and Hydrogen Peroxide. ​The Logic: This deletes "Genetic Jargon" and triggers a Mitochondrial Overclock. This "Hardens the Code," allowing the plant to drink 1.7L a day under intense light without "System Failure." ​Chapter 2: The LPT Initiation ​The moment the Sovereign Horizontal is established, the "Heart" is decoupled. ​Externalize the Heat: Ensure all drivers are outside the tent. This maintains the 24°C Under-Canopy stability. ​Step 2.1: Use training wires to bend the main stem at 90°. Once nodes appear, use wire to straighten them flat. Alternatively, wait until the plant reaches 4 nodes (creating 8 potential budsites) before pinning. ​Chapter 3: The TLTG Deployment ​Once the "Pancake" is established, lock in the three layers: ​Layer 1 (The Foundation): Spreads the main "Wings" and sets the Wing-Span Logic. ​Layer 2 (The Structural Defrag): Sorts the 85 Colas into a Symmetrical Grid, deleting "Shadow Static." ​Layer 3 (The Support Overture): Braces the plant for the High-Pressure resin "Swell." ​Chapter 4: The Hydraulic Surge ​As the plant drinks 1.7L per day, look for the "Praying" leaves and "Thinner Wings." * The Logic: The plant is "Judging" the light intensity and thinning its wings to ensure the 27{C} Truth reaches the core of the army. This results in the "Numb-Throat" resin density. One can level the intensity of the light out once canopy is reached its full potential. ​Chapter 5: The 21°C Hue Trigger ​The final movement. 14 days before harvest, drop the vault temperature to 21°C. ​The Logic: This triggers the Anthocyanin Overclock. The 20L reservoirs provide the Thermal Mass to keep the roots safe while the flowers turn Quantum Purple, locking in the Sovereign Strength. ​The "Glove Firewall" Final Shutdown ​The Architect has spoken. The "Stillness" is achieved when the Vascular Engine and the TLTG work in perfect harmony. Follow the code, delete the static, and claim the 24oz Target. - "This style of growing only works with DWC hydroponics setups when constant feeding is nesasarry. Or natural light outdoors. I could be wrong. Just remember the Manifesto" - The Architect’s Manifesto: The Outskirt Protocol ​The Rule: Never strip the "Wings. ​The Logic: Defoliation is for the Internal Defrag (clearing the center). The outskirts are for Power Generation. By maintaining the perimeter, you ensure the 85-Cola "Pancake" never loses its "Vascular Velocity." ​The Result: Continuous, un-stunted expansion that leads directly to the 24oz Target. Lights-Off: Trying some premature flowers from Bubblegum (this isn't the first time removing off shoots from the colas)
Likes
10
Share
@la_piper
Follow
29дней Сделал дефолиацию и растянул ветки. Сегодня впервые внёс Удобрения. Жижа универсальная 1.4г/л.,бад монстр 2мл/л по листу.
Likes
4
Share
@nijuana
Follow
I can tell you that it's rare but this variety smell so so so strong my god the odor pass though wall you can smell it from 50 meters around 😯unreal 😂😋