cogollos muy resinosos y bonitos un agrado cultivarlos

All four seeds sprouted at the same time just within hours. Very lucky for direct in soil germination! In this first week I just tried to make them nice and cozy with warms temps and high humidity. Trying to keep watering in check and small dosing so I don't risk overwatering them. Watered about once every two days when top soil was dry with 50/60ml pHed soft water.

All the photos are in the 8x8 now just a few autos in here now FOR EVERYTHING MARS HYDRO VISIT: www.mars-hydro.com www.marshydroled.ca PROMO CODE: rocknroll VISIT THE ALIEXPRESS STORE: @marshydro_aliexpress Instagram: @marshydropenny Thanks for taking the time to read and check out my diary🤜🤛 TS3000 FEATURES: WIDEBAND SUNLIGHT FULL SPECTRUM LED GROW, Infinite close to natural sun light, suit for all plants whole stages indoor growing, rapid plant response from seed to flower, achieve maximum quality and quantity, much better than traditional HPS grow systems. HIGH REFLECTIVE & NOISE FREE-Fanless LIGHT BOARDS design will make your growing life easy and quiet, quickly heat dispersing material aluminum reducing light lost to aisles and walls, increase the light intensity up to 20%, allowing your plants receive more energy and without burning your plants for maximum headroom. HIGH EFFICIENCY ENERGY SAVING PLANT LIGHT, high-power NEW LED grow, Compares to traditional 3000 watt HPS lamp and other brand led grow light while only 450 watts true output with 1016 LEDs, more scientifically and energy-efficient! Perfect for 5' x 5' veg stage, 4' x 4' bloom stage, higher intensity in a MARS HYDRO grow tent, reflective area, or by crossing over using multiple TS3000. BOOM YIELD LARGE GROW LIGHT, NEWEST SMD LED technology provide highest PAR/LUMEN output(1095.6umol/), makes you get 30% higher yield compare OLD led lights, can get max yield at 2.5g/watt, less pay but get more yield, bring a amazing grow trip to any home grower as it beams huge amounts of light energy to plants below. COMMERCIAL LED GROW LIGHT, Updated easy dimming & daisy chain function, main light controlled, especially come with two waterproof and dimmable Mean Well Drivers, auto sensing power supply works on both 120VAC and 240VAC and 277VAC, suit for Large Rooms and Commercial Setups. Low Energy-Consuming LED Grow Light: Consuming 300w and also mounted with 1016 chips, TS3000 has the ability to replace a 450w HPS light while reducing 40% power intake. High Efficiency LED Grow Light: With overall light output PPF 343umol/S as well as amazing PPE 2.3 umol/j, it's 50% even more photon efficient and can assure a 30% more return than the old HPS/MH lights. Patent Highly-Reflective Hood Shape: The reflector design on TS3000 is patented, which can effectively gather the light dispersed in all directions to enhance its light intensity as well as assist plants in absorbing more light. Full Spectrum Plants Favorite Spectra: By the unique mix of spectra that makes most light in the 400-700nm waveband, incredibly conducive to plant photosynthesis. Adequate IR(730-740nm) is additionally consisted of in the range to generate larger buds. Dimming And Daisy Chain Feature Available: Upon an independent dimming button on the external driver, backing 0-100% settings adaptation and up to 30 LEDs daisy-chained in a group, it supplies different light levels for various plant stages meanwhile saving energy. Safety Certifications And Service Warranty: CE, ETL, RoHS, UKCA security certifications accepted, 50,000 hours durability, 5-year service warranty, and local after-sales repair 5x5 GROW TENT: LOCK ALL LIGHT INSIDE MARS HYDRO Indoor Grow Tent interior is made of diamond mylar which is highly reflective. (Other brand's mylar and reflective rate is as low as 50%, won't provide efficient light. )MARS HYDRO 1680D canvas, being double stitched, it is tear proof and has perfect light locking. Mars Hydro's grow tent keeps 100% lighting beams inside and helps your plant absorb more lights. EXTRA-THICK --No light leaks or rips at all DURABILITY GROW TENT Stable metal corner adapters and poles are the trustful supporters of the tent, standing sturdy, neither rusting nor paint-falling, quick easy tool-free installation. Mars Hydro's heavy-duty metal zippers, with double layer black lining, are the best on the market which create a light-proof seal EASY OBSERVATION FOR YOUR PLANTS. Special observation windows are made by double layers of cloth. Observe the growing conditions of your plants without opening the tent and avoid disturbing plants. The observation window also serves to dissipate heat and ventilate air AUTOMATIC 6 INCH EXHAUST FAN KIT W/ CONTROLLER: Mars Hydro 6'' Inline Fan uses a mixed-flow design to maintain peak performance in a high static pressure environment. GROW TENT FAN: MARS HYDRO inline fans are designed to ventilate hydroponic grow rooms, transfer heating/cooling, cool AV closets, and exhaust odors. EFFECTIVE VENTILATION: Variable speed controller for easy fan speed adjustment. Optimal ventilation for your planting. LOW NOISE LEVEL: Durable plastic fan housing and blades for extremely low noise(32dB-A); create a truly quiet growth environment. EASY INSTALLATION: Removable duct ends with locking tabs for quick removal and easy maintenance and a cord length of 4.9 feet for hassle-free setup. This grows tent fan with a controller for easy fan speed adjustment. BASIC PARAMETERS: Ventilation exhaust fan size: 6” | Dimensions: 315mm*225mm*210mm. | Weight: 2.7. | Airflow: 402CFM | Noise: 32dB-A | Bearings: Dual Ball. 

After defoliating both Barbarian (=AK-47 x Barbara Bud) plants after week 11 they now develop more and amore flower clusters, since the light can penetrate deeper int the canopy now. The plants are producing trichomes like crazy, even the bigger sugar leaves are covered in them! VERY FROSTY PLANTS! The flower clusters clearly form colas now along all side branches and both plants fill up nicely. The smell is now strong and sweet with a clear peach aroma to it, it makes me smile every time I look into the tent. The plants love the Advanced Nutrients feeding schedule and are getting the recommended dose every watering.

So I have decided to only note when changes are made, observations are warranted, or I feel something of note has happened. I'll still do daily progressions, but the rest has already been documented and no need to create a hundred new pics showing the same. Just understand that if I say "7.1ph," or something with tested amounts that I mean I first calibrated and tested my ph pens and all units are measured for accuracy. I am learning as I go, so it would be of no benefit to report inaccurate details. 112/42 VPD and PPFD are still the same this week. 73-76F in the day and 66-68 overnight with RH set to not exceed 55% but is mostly at 45 to 50% now that winter is here. The fan is set to auto and I have 2 de-humidifiers in the tent. The PH lockout issue is still in progress but I am starting to get the soil up to snuff now. I think using the knitting needles has the most beneficial effect on the soil as it both aerates and allows the nutes to get deeper. 113/43 Defoliated today. I removed the worst of the affected fan leaves and this unfortunately only leaves sugar leaves to run photosynthesis process. Im hoping she still gets enough of everything else to grow the buds, but only time will tell. I will take new control pics for new progression on 3 other sites now. Watering Days. All feeds with nutes use either a whole ratio, or combination, of "Veg Mix" and "Bloom Mix"concentrates. These are/will be DILUTED in water until a total ppm of add-in is reached using a (Total Dissolved Solids) TDS Meter measured in PPM (parts per million). The "Veg Mix" concentrate will eventually be added-in larger, then smaller, ratios while the "Bloom Mix" concentrate will eventually replace the "Veg Mix" concentrate entirely. The ppm and ratios will be listed when I feed. Veg mix recipe is on week 3. Bloom Mix recipe is on week 5. Last feed was day 110/40 (next will be +3) I expect to continue to use 7.1ph with 650ppm of bloom mix concentrate and feed 2.5 gallons every 3 to 4 days, so I expect about 8 to 11 cups of runoff at that time as well. I have decided that I will try to add 1 ml of CaliMagic (General Hydroponics 1-0-0) per gallon of feed on each feed for a week or two to see if this can help against ph lockout of calcium since it cant be N,P, or K. Cant be N because she uses WAY less N in flower, and it cant be P or K because I am getting nute burn with the feeds I am already using... so my conclusion is that she need more micro nutes from the lockout, and since I was thinking it was Calcium in the start, I am going to try a more detailed treatment to test results against from here. Day 113/43 (last feed was day 110/40) Tested and Calibrated my ph pens. Fed 2.5 gallons of purified water (starting with 16ppm) mixed with 658ppm of 100% Bloom Mix Concentrate. Due to this soil showing a possible calcium deficit, I am starting a 1ml per gallon add-in to test on all plants using this soil, so I added 2.5ml of CaliMagic (General Hydroponics 1-0-0) to the feed then I ph balanced before feeding. The ph on this feed was balanced to 7.1. I used knitting needles to help both aerate the soil and create new water pathways for the roots. (a practice I may consider a new feeding standard for all my plants) I got ~7 cups of runoff (~11 cups last feed). Higher runoff volume was expected with the feed volume but glad to see she's taking it better now since I started knitting needles. Runoff was tested at 6.12ph and 2250ppm (5.9ph with 1860ppm last feed). Top soil tested at 6.23,6.31,6.57,6.38 for an avg of 6.372 (6.327 avg after last feed) - next feed will be 7.1ph again as I'm still liking where the ph is finally going, but rather see it closer to 6.3 or 6.4 top and bottom. I dont see any issues with the feed's data other than the possible calcium deficit and I will continue to monitor runoff ppms as I expected this to be lower with less runoff but have to consider they maybe washing out salt with the knitting needles. Next Feed should be 3 gallons of de-chlorinated tap water ph balanced to 7.1 in +4 days (117/47). I will run 650ppm and 3ml of CaliMagic (General Hydroponics 1-0-0) again. Day 117/47 (last feed was day 113/43) Tested and Calibrated my ph pens. Fed 3 gallons of de-chlorinated tap water (starting with 299ppm) mixed with 671ppm of 100% Bloom Mix Concentrate. Due to this soil showing a possible calcium deficit, I am starting a 1ml per gallon add-in to test on all plants using this soil, so I added 3.0ml of CaliMagic (General Hydroponics 1-0-0) to the feed then I ph balanced before feeding. The ph on this feed was balanced to 7.4. I used knitting needles to help both aerate the soil and create new water pathways for the roots. (a practice I may consider a new feeding standard for all my plants) I got ~20 cups of runoff (~7 cups last feed). Higher runoff volume was expected with the feed volume increase might let her go to 4 days again and 2.5 next feed. It could be a result of the knitting needle treatment when feeding. Runoff was tested at 6.10ph and 2070ppm - again thinking it could be a result of the knitting needles (6.12ph and 2250ppm last feed). Top soil tested at 6.23,6.31,6.57,6.38 for an avg of 6.372 (6.372 avg after last feed)- next feed will be 7.1ph again as I'm still liking where the ph is finally going, but rather see it closer to 6.3 or 6.4 top and bottom. I dont see any issues with the feed's data other than the possible calcium deficit and I will continue to monitor runoff ppms as I expected this to be lower with less runoff but have to consider they maybe washing out salt with the knitting needles. Next Feed should be 2.5 gallons of de-chlorinated tap water ph balanced to 7.1 in +4 days (121/51). I will run 700ppm and 2.5ml of CaliMagic (General Hydroponics 1-0-0) again.

Regando solo con agua ya 2 semanas, sin necesidad de lavado el cultivo probiotico me lo permite las flores ya están maduran y se nota una densidad enorme en las special queen y en las green gelato de royal queen seeds

Hey everyone 😃. This week they have developed better and better :-). It has become a real bush 😍. It grows very evenly and beautifully 💪🏻. Well gets you also use your flower fertilizer so that you can put your power into the flowers. Otherwise there is nothing to report this week. Have a nice week, stay healthy 🙏🏻, and let it grow Strain : Sour Diesel ☝️🏼😍 Genetic: Diesel x Northern Lights 👍 Vega Lights : 2 x Todogrow Led Quantum Board 100 W 💡 Flower Lights : 2 x Todogrow Led Cxb 3590 COB 3500 K 205 W 💡 ☝️ Soil : Canna Terra Professional + ☝️ Nutrients : Canna Terra Vega, Canna Terra Flores, Rizotonic, Cannazym, CANNA Boost, Pk 13/14, Canna Cal/Mag, Canna Ph - Grow, Canna Ph - Flores ☝️ 🌱 Water: Osmosis water mixed with normal water (24 hours stale that the chlorine evaporates) to 0.2 EG. Add Cal / Mag to 0.4 Ec Ph with Organic Ph - to 6.0 💦 💧

Week 7 is ending today. I decreased my Macro nutrient by half. This week will probably be my last week using it. I took the Armor Si out of the regimen completely. I started using terpenz at 5ml per gallon. No issues still. Keeping my fingers crossed for everything to continue on cruise control. The rainbow cake and London mint cake is super frosty. They all have a pretty strong smell. I have clones and will continue to run the strain I like the best.

Day 14 from planting directly in substrate. Do my plants look healthy? i don't know cause this is my first grow.

I made this week's feed to reach around 550 to which was a big jump from 250 ppm. This was my usual start out but once I saw the information on the Royal Queen Seeds Website I decided to up my juice! Check out my Instagram page for more of my home grow! @Canha_patch🌿🌿🌿

Englisch Week 3 is coming to an end and the ladies are growing magnificently. The only real outlier is Gelato #4, I don't know whether it was too stressed because of the repotting or why it isn't growing as fast as the others. When fertilizing, I continue to follow the feeding chart and Athena's hand watering strategy. The plants are accepting the very high dose of fertilizer wonderfully, which is somewhat to my astonishment, as I am not used to running these high EC levels from the start. Now that my Par Meter has finally arrived, I can keep a better eye on the light levels, which are currently at 500u/mol. Deutsch Woche 3 neigt sich dem Ende zu und die Ladies wachsen prächtig. Den einzigen richtigen Ausreißer macht die Gelato #4, ich weiß nicht ob sie wegen des Umtopfens zu viel Stress hatte, oder woran es liegt, dass sie nicht so schnell wie die anderen 4 wächst. Beim Düngen halte ich mich weiterhin an das feeding chart und die hand watering strategy von Athena. Die Pflanzen nehmen die doch sehr hohe Dosis Dünger wunderbar an, was etwas zu meinem Erstaunen ist, da ich es nicht gewohnt bin diese hohen EC Werte von Anfang an zu fahren. Da nun endlich mein Par Meter angekommen ist, habe ich die Lichtwerte auch etwas besser im Blick, womit wir aktuell bei 500u/mol liege.

Amazing week! Nice progression

I'm happy .. because of the evolution of my zombie kush outdoors ... I grew 25 centimeters in a week ... and I think that I would be in flowering the other week ... I edged out the best potential of it in height and fattening the maximum only with organic products .... she is measuring 81 cm ... I am very happy ...

Day 30 Nulla da dire. Primi peli di inizio fioritura e messo 600w hps A settimana prossima 🖐️ ❤️

Day 35 - Ladies are way taller than I could have ever imagined & starting to get extremely dark pruple😍 make sure to check back for daily updates & happy growing friends✌️🏼🌱

Hi everyone 🤗. The tent bursts at the seams 😍. The buds are getting bigger and bigger :-). The blue chesse pheno 1 is harvested this week 😎. next week both Tangie Kosher Kush will be harvested :-) everyone else needs something 😊. I wish you all a nice week, stay healthy 🙏🏻 and let it grow 🌱

One more week till flower

Plant b look like she is just about down I see alot of cloudy tricones and about 10% of that is turning red so by the end of this week I think it will be time to chop

Bienvenidos a este nuevo diario de Limón Blanco patrocinado por Khalifa Genetics! Día -3 (09/01): Se coloca la semilla en tubo de ensayo con 15 ml de H20 Osmosis RO + 3 gotas agua oxigenada (H2O2) en un lugar oscuro a 25 ºC durante 24 horas Día -1 (11/01): Se prepara una maceta de 1L con sustrato PRO-MIX HP BACILLUS + MYCORRHIZAE Se humedece el sustrato muy lentamente hasta percolación profunda con H20 Osmosis RO Se hace un agujero de 1 cm de profundidad, se coloca la semilla con la radicula hacia abajo, se tapa con un poco de sustrato y se humedece ligeramente con agua en spray Se coloca parte superior botella / propagador en la zona de germinación para mantener humedad relativa alta y se introduce en el armario a 20 - 22 ºC (DLI 13 - 20/4) Khalifa Genetics - https://khalifagenetics.com/product/lemon-blanco-v3/ 💦 BioTabs 15% DISCOUNT code "GDBT420" biotabs.nl/en/shop/ @biotabs_official 🌱Substrate PRO-MIX HP BACILLUS + MYCORRHIZAE @promixmitch @promixgrowers_unfiltered 💡2 x Mars Hydro FC1500 EVO Led Grow Light (2024 NEW FC 1500-EVO Samsung LM301H 150W LED) - https://marshydro.eu/products/fc1500-evo-led-grow-lights/ - https://www.amazon.de/dp/B0CSSGN5D8?ref=myi_title_dp