So this is a super tiny solo cup shot glass 1 oz of soil. Germinated Wait and see!!!

Dear diary, Week 10 total and week 1 of flower is behind us. Will just be making sure all tops are exposed and somewhat in the right place as I let them stretch for about 21 days before some defoliation. 🌸🌸🌸🌸🌸🌸🌸🌸🌸🌸 ⏰ Day 67: Feeding was given in the evening with a solution of 1.87ms and pH of 5.6. During this feeding, I guided most of the tops into their designated positions within the net, ensuring they are adequately spread out to receive optimal light. I also checked the runoff, which measured 2.3ms, but considering the extra dissolved salts from full draining and collection that would be higher that it really is, I will aim to bring it back to the desired range of 1.65-1.7ms to be sure. ⏰ Day 68: In the evening, the plants were fed with a solution of 1.64ms at a pH of 5.8. ⏰ Day 69: Evening feeding consisted of a solution with 1.66ms strength and a pH of 5.9. I also took the opportunity to confirm that the lights were positioned at a 48cm distance from the canopy. Additionally, I'm testing the exhaust system by venting it outside the room. Currently, the relative humidity (RH) ranges from 53-55% during lights-off and 58-60% during lights-on, while the temperatures remain around 18°C with lights off and 23.5°C with lights on. These conditions fall within the desired vPD (vapor pressure deficit) range of 0.95-1.2. ⏰ Day 70: Feeding was carried out in the evening using a solution with a strength of 1.66ms and a pH of 5.9. To enhance air circulation, I added a fan at the top of the tent. Furthermore, I checked the light intensity, which measured around 760-780ppfd. ⏰ Day 71: During the evening feeding, the plants received a solution with a strength of 1.64ms and a pH of 6.4. The RH levels range from 55-65% as the girls get more bushy, while temperatures vary between 23-18°C, depending on whether the lights are on or off. ⏰ Day 72: Evening feeding included a solution with 1.64ms strength and a pH of 6.4. ⏰ Day 73: The plants were fed with a solution having a strength of 1.66ms and a pH of 6.0. As indicated by the feeding schedule, the A+B mix was increased to 3.5ml/l. I also ensured that the lights were positioned approximately 50cm above the canopy and set to 90% intensity to provide additional heat.

Hola familia, confieso, está genética es de mis favoritas, y no solo por lo fácil que es su cultivo. Esta variedad con predominancia indica, se está comportando muy bien en nuestro interior. Controlando el ph y alimentándolas bien, no tienen por qué suponer ninguna complicación en su ciclo. En floración procuramos que jamas suba la humedad por encima del 50% ni que la temperatura sea muy elevada, podemos falicitar la formacion de hongos... y no queremos eso. Resumiendo, bastante contento con la evolución de las Lemon kush. Hasta la próxima semana familia.

Planta ira crescer reta para sima. Sem muitas coisas. Para fazer comparaçao com uma planta com o LST e tera apenas 2 semanas de cresimento Planta com crescimento muito rapido e com bastante folhagem

Hi Grow Diaries Fam, It' s the last week for those girls. It was a pleasure to grow her. Day 65 : It smells extremely strong. The neighbors are going to ask ❓❓ ❓. I think I'll have to cut earlier than expected.🤷🏼🤷🏼🤷🏼 Day 67 : Harvest Day 😁😁😁😁 See you later for the taste test. Peace to all ✌️🏻✌️🏼✌️🏿✌️🏾✌️✌️🏽

Hello The pistils are turning Amber, the leaves are getting more and more purple and the buds are getting bigger by the day. Im starting to flush her now and I believe I could harvest her around 23 october, in 10 days. The smell is already delicious and powerful.

Un altra settimana è passata e tutto procede bene.per fortuna non ho più trovato nessun nanners 🙏✌️💪..belle piantine mie, continuate così che farete delle belle pannocchie.... 30/8/24 gente ho combinato una bella cazzata.pur avendo esperienza, mannaggia a me,mi sono portato a casa dentro il box, il cazzo di ragnetto rosso... fanculo... Ho già iniziato a ripulire tutto, box e piante con Neem...li sterminerò tutti 😂..

**Encontrarás la traducción a español al final de la descripción** If you like this week, please hit a like, it costs you nothing! 👊. Thanks in advance 😉! From/Desde: 29/07/19 || To/Hasta: 04/08/19 From day/Desde día: 7 || To day/Hasta día: 13 -----IMAGES & VIDEOS----- V1: The growing of week 2, it's incredible how she twist herself 😱. P3: The setup of static cameras (tent slaves), I'm using a GoPro capturing a top timelapse video, and an iPhone capturing a frontal timelapse. The GoPro is placed under the lights and it gets too warm, i will remove this camera position later for the safety of the camera and it's battery. With the iPhone i'm using the SkyFlow App to capture timelapses. -----WEEK SUMMARY----- This is the week of transplant, i will do it on day 10, August 1rst. I will use ±1 cm of perlite in the bottom of the 19,5 l AirPot, ±3 cm of BioBizz Hard-Mix over the perlite and for the rest i will use BioBizz Light-Mix. About the growing, as you can see she's growing at a very good rate since transplant, she was not growing much the last days on the small pot so I decided to perform the transplant. -----WATERING CALENDAR----- 01/08/19 - 5,000 ml with all week nutrients @ 0.9 E.C. PH5.8 *****ESPAÑOL***** Por favor, si te gusta esta semana dale un like, no te cuesta nada 👊. ¡Gracias por adelantado 😉! -----IMÁGENES Y VÍDEOS----- V1: El crecimiento de la semana 2, es increíble cómo gira sobre si misma 😱. P3: La configuración de las cámaras estáticas (esclavas del armario), estoy usando una GoPro capturando un timelapse desde la parte superior de la planta, y un iPhone para capturar un timelapse frontal. La GoPro está colocada justo debajo de las luces y se calienta demasiado, quitaré esta cámara de esta posición en unas semanas por la seguridad de la cámara y su batería. Con el iPhone estoy usando la app SkyFlow para hacer los timelapses. -----SUMARIO SEMANAL----- Esta es la semana del transplante, lo haré el día 10 ó 1 de Agosto. Usaré ±1 cm de perlita en el fondo del AirPot de 19,5 l, unos ±3 cm de BioBizz Hard-Mix encima de la perlita y el resto BioBizz Light-Mix. Con respecto al crecimiento, como podéis observar la planta ha empezado a crecer a muy buen ritmo desde el transplante, no estaba creciendo mucho los últimos dias del tiesto pequeño por lo que me decidí a transplantarla. -----CALENDARIO DE RIEGO----- 01/08/19 - 5.000 ml con todos los nutrientes semanales @ 0.9 E.C. PH5.8

D15: She showed no signs of stress from the topping at all, furthermore, she even grew overnight like nothing happened! This one is promising… D16: Unlike yesterday, she hasn´t grown any. Strange. And the leaves are a little rugged but not anything to worry about. D17: Watered 3L of 6.1 ph water with 0,5ml/L of Fish-Mix, 0,5ml/L of Bio-Heaven and 1ml of Root-Juice. D18: Started the LST with very little pressure on the top nodes. Not sure yet if I´m mainlining for 8 colas or 16. D19: Topped her 4 branches today, let´s see how she handles it. Almost broke a node but I stopped forcing soon enough and it just made a little hole, I guess she´ll recover from it with little to no stress. D20: Everything´s fine, she seems healthy, but today when the lights turned on, there was water droplets all over the leaves, I have no clue what´s that, but it might related to humidity and temps, strangely it occurred only to this one girl. Also place a wire to support one of the topped stems that is very very fragile and wants to break off. D21: Leaves are getting a little twisted and I don´t know why, it must be the high humidity levels.. I just can´t control it with simple and cheap ways, I guess next month I´ll need to buy a dehumidifier.. Otherwise, the leaves are very dark green so I might stop with the feeding for some time but they are very thick and big, which is a little pain but a very good indicator! Ah, and the topped stem that is fragile is getting stronger again!

Day29F - still showing vast growth on buds, swelling and trichomes blossoming out. The colours starting to form nicely on the buds. Smells like a pungent caramel now. Day32F - This plant is so thick and strong, and can resist a dry and hot climate. For me this plant has been so easy, and she sucks up nutrients and loves it, 💪 Buds are getting dense and so sweet to smell. So fat and so many, I'm surprised on this auto 👏 well done again RQS. Day 68- Day 33F - the buds continue to swell and devolope. Trichomes flooding through now. Starting to see cloudy so will push for another week of nutes if she'll allow it after Friday, we'll see 😏✌️💚

HAPPY 420 Today iam entering the SEEDSMAN 420 Growoff with the Following strain the FATSO GMO f1 automatic. All will start Indoors under SANlight Flex 25, and move Outdoors. Only one Plant stays indoors, to see the performance under best Conditions because my Outdoor Garden is hard^^ So i started with letting them soak, and then the seeds will move under a humid Kitchensponge unil i see a sweet Taproot. then they will go into the Final Pot, filled with lovely TerraPreta mj mix the grow will be supported with Biotabs fertiliser Breeder Information Fatso GMO F1 Auto is a feminised hybrid strain that is the result of crossing two autoflowering strains, viz. Fatso Auto and Cotton Candy Auto. This Cali-derived, slightly sativa-leaning, easy to cultivate strain will please growers with its big yield, solid THC content and its sweet, candy and fuel palate. Fatso GMO F1 Auto will grow well both indoors and outdoors. It has an above-average resistance to mould but will still benefit from good ventilation, especially where humidity levels are quite high. Resistance to plant pests and other pathogens is excellent. While plants will remain quite short at around 100cm or less indoors, they can grow a little taller, reaching a height of 130cm, outdoors in open ground. The entire cycle is completed in a maximum of 75 days from germination through to harvest and although yields are said to be average this is still pretty impressive for an autoflowering strain. The combination of high resin production and high terpene levels make Fatso GMO F1 Auto a very good strain from which to make cannabis extracts. The terpene profile is sweet and funky with savoury scents of Skunk with pine and floral notes. The taste is like sweet candy with hints of fuel. THC production is high, reaching 24% while CBD is low. The effect is uplifting and well-balanced.

Tutto ok...una nata un giorno prima dell altra pultroppo!!

Good start, one of girls is bit smaller, but it's not big problem now. Started adding nutrients. Be optimistic!

12/30/23 - Day 54 - Hello All! I started this week a day early. I wanted to update everyone on something I have been thinking about a lot. Curing. I feel if there was a hole in my growing skills it would be curing. Last grow there was more than I had anticipated. I was not set up for curing 1 lb. I threw in an audible at the last minute. It worked out but I know I can improve with some trial and error and hands-on experience. So after reading a ton, and going off of some of my prior builds for drying, I came up with this design. I have a controller that will turn the air on and will run when the contents inside the box hit whatever RH% I want to set it at. I think the first week I will set it for 78%RH, then every couple of days go down a % until I hit 62%. The thought is that if the bucket gets above the set RH% then the air will kick on and distribute air across the buds until the RH% is back down to where you want it. It will force the humidity out. I won't need to worry about burping. It will happen on its own.... in theory. Ill update tomorrow with some pictures after the water change. 12/31/23 - Day 55 - Everything is looking good. The water change completed this morning while I was in the shower. Its adding nutes now and will do so over the next hour or so. She is starting to get stinky. I had to add the extra carbon filter to the room. I've got some pics up top of that. Happy New Year! Next time I post it will be in 2024! Have a great night and be safe! Dont drink and drive, your life and anyone else involved in an accident is too important! C' YA! 1/4/24 - Day 58 - I have been thinking of trimming her for a while.... I got a comment on the bushy-ness and I got self-conscious and gave her a trim. Lol I have been going bath and forth for a while and that gave me the push to give her a little trim. She looks great and is growing really quickly. Ill update with more pics as it goes along.

It's been 61 days of flower now and they only got another week or week and a half left. The gals are still loving the new fc4800, TSW2000 and their new 8x8 mars hydro grow tent as much as I do👍 leaves are sticking straight up towards the light. Love how easy the zippers are to open and close. Nice and strong and guaranteed to last. It has extra material on the backside of the zipper that helps for light leaksand enough ports and vents for anything you need in it👍. the tsw2000 is still going strong and is also a very good light. Its been going almost nonstop for 6 months and still working the same as when I got it👍. not much heat off both lights but the fc4800 is alot cooler and the heat-sinks work extremely well. I have it daisy chained to the tsw2000 and 1 dimmer controls the other and i don't need to be reaching in too far to dim the other light, it's awesome and I can't wait to buy more lights to daisy 4 together👍. I would recommend this light to everyone that grows with leds and have trouble with temperatures getting too high. Even if you grow with HPS lights I think any mars hydro light is a MUST TRY. I like how heavy both lights are because I know it means they are built soild and strong 💪. Very good sign with the frost they are starting to get thanks to bith mars hydro lights. I can notice more frost under the fc4800 and I'm thinking it's from the UV DIODES they put on the fc4800 👍. 2 days ago they all smelt like my nuken, sweet marshmallows. But now I can smell the monkey dough and gorilla glue and skunk monkey coming through👍. I touched a bud on the gorilla and monkey fingers smelt like fruit loops👍 really pleasant smell. Lingered on my fingers for atleast 30 min. I'm glad mars hydro is under priced compared to some brands and for how popular they are. usually companies would charge more. Thanks mars you guys are awesome 🤘🥁🎸. I'm getting a new exhaust fan soon. An 8 inch that will work alot better than my 4 inch lol. Wayyy to small for a 8x8 Grow Tent. Dehumidifier is going almost non stop to try and get the humidity down. I love how both lights on 100% power only raise my temperature 2 or 3 degrees 👍. You can rest your hand on the lights and not much heat comes off them. Obviously there is some heat but for the brightness of the lights and only raising the temp that much is awesome 👌.  And if I wanted to I could remove the driver from the fc4800 and run it on the outside of my tent because the cord is so long but 2 or 3 degrees is barely nothing👍. The girls are starting to bulk up abit now and only 3 weeks of flowering, these lights are awesome 👌.  My last run of monkey dough and gorilla glue didn't start showing alot of crystals until week 4. These were only 2.5 weeks and I started noticing some frost. Next week I will be able to tell more about what these custom bred seeds will be like. I love how the smell is changing now. Didn't want all them to smell like nuken marshmallows lol. It's awesome that I can get right inside the tent to do any work i need👍. Even if I wanted an 4x8 tent. I'd rather this 8x8 because it's so easy to work with the plants and have so much room to move around and massive headroom when I'm in there chillin with the gals🤣🤘. FOR EVERYTHING MARS HYDRO VISIT: Www.mars-hydro.com VISIT THE ALIEXPRESS STORE: @marshydro_aliexpress2 PROMO CODE: rocknroll Instagram: @marshydropenny https://youtube.com/channel/UChU5ZWwNi-DvnO3oWVU3ceA Thanks for taking the time to read and check out my shit🤜🤛 GET THE MAX FROM MARS👍: Welcome one of  the newest members of the Mars Hydro family🤜🤛🤘. The Mars Hydro FC 4800 480W LED Grow Light can accommodate up to a 4' x 4' area for flowering. It has OVER 2000 LED chips consisting of the best selling Samsung LM301B diodes which has a Luminous Efficacy of: 220 lm/W 0.2 W, 3 V mid power, Osram 660nm Diodes, Infrared light and UV LIGHT👍. It boasts the incredible efficiency of 2.8 µmol/J, maximum 2.5gram yield per watt with 30% higher Average PPFD. This High-intensity spectrum is beneficial for plants at all stages - from veg to bloom, and creates Big dense Buds👍. achieve 50% higher yields & quality compared with the old lights! Only consumes 480W for 4x4ft personal grows, and 3x3ft for commerical grow. It comes with a dimmer and daisy chain function with a  maximum of up to 15 lights, the master light controls the rest👍. Wide 6-bar design offers even & wide canopy coverage and can maximizes your grow space. slim 180° FOLDABLE DESIGN... YES I SAID FOLDABLE🤘🤣 , making it compact and easy to install, it's IP65 WATERPROOF and will give you no worries while growing in a humid environment and makes it a flexible high performance commercial grow light for enormous  SUPER FROSTY yields.😛😛😛. MARS GETS EM FROSTY BOYS👍 AWESOME HEAT DISSIPATION: The Low energy consumption FC4800 growing light has 6 passive-cooled bars and an aluminum heat-sink a removable driver  you can upgrade later or have it outside your tent. with zero noise  you can save up to 50% in your electricity bill compared to HID's or HPS lights! It also has a removable driver so you can upgrade it in the future or have it outside your grow space for better heat control in your growroom👍 UPGRADED FULL SPECTRUM: Yield Max Spectrum with enhanced red (Top-Bin Samsung 3000k-5000knm, Osram 660nm Deep Red), speed up blooming & fruiting, perfectly suited for full-cycle growing. The FC4800 LED grow lamp was born for Big Buds, perfect for commercial, grow tent, grow room, hydroponics, and all soil grows.👍 THE BEST SAMSUNG DIODES: THE FC4800 has Top Bin genuine Samsung Osram Diodes, combined with remarkable 2.8 µmol/J Efficacy, 30% higher Average PPFD, 50% less energy consumption, to maximize your yields. They give you a TRUSTED 3 years warranty 100% Satisfactory guaranteed!!! The MARS HYDRO 8x8 Grow Tent interior is made of a unique diamond design mylar which is highly reflective. (Other companies mylar and reflective rate is as low as 50%, and it won't provide efficient light. They use thick 1680D oxford canvas, and being double stitched, it is tear proof and perfect for locking in the light. Their grow tent keeps 100% of the light inside the tent and helps your plants absorb more light. EXTRA-THICK material means No light leaks or rips at all.👍 Strong Stable metal corner adapters and poles are the trustful supporters of the tent. It's very sturdy, neither rusting or paint flaking off. quick and easy tool-free setup. They use heavy-duty metal zippers, with double layer black lining, by far the best on the market which creates a light-proof seal. The Easy observation windows are made by double layers of cloth. Observe the growing conditions of your plants without opening the tent and avoid disturbing your plants. The observation windows also serves to dissipate heat and ventilate the air. The tent includes 2 removable waterproof floor trays to hold soil and water. The removable tray can be taken out to wash easily. They guarantee the grow tents are easy to install even if you've never done something like this before. Clear Instructions and no tools needed! They also offer 30-day unconditional refunds for quality problems. Just contact their friendly 24 hours customer service 👍 https://greenbuzzliquids.com/en/shop/ PROMO CODE: rocknroll https://www.youtube.com/watch?v=8hEqyS1jPpI https://growdiaries.com/diaries/112437-grow-journal-by-rock-n-roll-randy/week/593118https://greenbuzzliquids.com/ #greenbuzzliquids @GreenBuzzLiquids

week 7 first flowering week when I finally discovered my princess was actually a prince. 12/12 flowermind ferts (6ml + 0.5g) LST + defoliation started seeing some thrips again, but just a few, nothing to worry so, the plant stayed for 4 weeks in the tent, under COB LED 200W.

Still see nitrogen toxicity so im going cut biogrow down to half dose and see how it goes! Besides that all looks well Smells are stepping it up in a couple pheno! On the Chocolate Marshmallow side we have a intense sour fruity pebbles on a pheno that is just unreal And on the double d side we have some rotten tooth chem smells coming through!

I’m gone check back in for the smoke report

She has left the Sunset Sherberts behind, and deciced to take advantage of the nice and toasty environment. Jedi (her name) has finally broken through. Steady at 21.5-24 C. RH at 65-75% with Spider Farmer Huimidifier and Dehumidifier, shooting for VPD. (day 1) Let's quickly review the key new components I've planned to integrate or have already: Circulation Pump - Adding this to the 14L Mars Hydro reservoir will ensure even fresh, circulated-for-a-miniute-every-hour, batch of water (and later nutes) to the auto-drip system, maintaining optimal feeding for my plants when I am away, next week. Biobizz & BioTabs Supplements - These organic nutrient and microbial products will provide a comprehensive and balanced feeding regimen for my plants. Auto-Drain Potted Plant Stands - The wheeled, auto-draining stands will simplify watering and prevent any spills or overflows. Inkbird Humidity Controller - Pairing this with the Spider Farmer humidifier and dehumidifier will allow me to precisely maintain the ideal VPD (Vapor Pressure Deficit) levels. LST Clips, Trellis Net & Shelves - These will help me maximize my grow space and optimize the plant canopy for optimal light exposure. Pest Control Strips - An important preventative measure to stay ahead of any potential pest issues. Smart Soil Sensors - The Zigbee-enabled sensors will provide vital data on soil moisture, temperature, and more, which I can monitor remotely. Air Purifier/Ion Generator - Ensuring my grow environment has clean, high-quality air circulation. With all of these elements in place, combined with my existing setup and the automated control via the iGrow app, I'm truly creating a "hands-off" grow operation. (theoretically, with a bro, coming to phiscally check too)....The ability to monitor and adjust key parameters remotely while I'm away in Italy. Running on Sunrise/set mode(18/6) over the "seedling" scene, in iGrow app, keeping track of DLI and later on, the Adlites will come into play. Temp at 23.5 and RH is at 60%.