Last week's topping turned out to be a FIMing. Not necessarily a bad thing, but I wasn't planning for it. I guess that makes it a true FIM. I tied a branch too tight during LST and it snapped while the plant was growing. Reminder to avoid training too tightly.

Unos cogollos brutales ! Tienen muchísima resina … los olores son de frutas y con el toque Cali que la destaca ! En general chicos es una cepa que si tuviera que repetir no lo dudaría ni un segundo por su fácil cultivo y sus grandes cogollos 17g en seco en maceta d 3l

Buds are fatting up auto has another week or so to go watering with just plain phed water still giving the photos nutes this week next week is plain water for my records

WELL! What an experience. I made some mistakes, learned a lot and still got some excellent weed out of it. Super frosty, LOUD and SO dense it's ridiculous 😂 Sadly i got some (a lot for me) mold, i encountered for the very first time. With it being almost winter in Germany, the temps dropped really hard for some days and then even 60% humidity was too much for the strain. I also would say it isn't that resistant against mold, so just keep that in mind, the buds are so dense, it's really easy for them to trap water. I had to throw away like 1/4 of the yield, mostly the top buds 💀 That kinda sucked, but it could be worse, it's fire weed tho, i'll add pictures of the buds later.

Day 48, end of week 3 into flower 🍓🌱 Plant got a good Lollipopping 🍭and a heavy defoliation. I've run into a big problem this week, as i noticed the plant is having a light stress.. Lots of leafs got curled up and tip burned😱🤦🏽😞 I turned the lights down to 170w, and it seems the stress on the plant has stopped. This is my 3rd run with this light setup, and on the last 2 runs i was growing with about 220W with the same setup/tent size. First one i grew was a Cinderella Jack auto from dutch passion, was 100% perfect with 220w! Second was Zkittlez by FastBuds, and with her i did saw signs of light stress, but the plant came out perfect at the end. But this OG Kush auto seems extra sensitive to strong lightning, I just hope she will recover and produce well 😳🤞🏽🌱 Other then that the plant just keep getting bigger and bigger!! 🤯😍 Its 54 cm high (started the flower at around 30cm!) And she was topped of course, Absolutely fantastic in that matter!✌️🏽

this diary is a week ahead. will get in back in line soon. day 0-7 to be as week 1 not including the germ week. This banner kept much shorter than its brother. its also in a slightly shallower tub of soil so this one is flowering a bit quicker than its counterpart too. to keep it at the same height as all my others ive raised it from the floor slightly and then put the screen over top to bend the top cola. buds forming nicely now. i said fuck it. full organic feed for you.! nutes then fresh water twice then nutes again. deinking now a litre every 3 days. hardy plant but a couple white spots on the leaves... slight calmag to give prob.. end of week 5 flowering up to day 35. week 6 as of 36--> ps if anyone has a spare grow tent that they could donate me that would help a brother out ;) day 40. adjusted to normal schedule

Buying nutrients can get so expensive so I have decided to use tried and true miracle grow. I had some left over from last summer and I am going to use it for this grow. I actually have never tried growing cannabis with miracle grow, so this is a first for me. Miss Gorilla grew a lot this week and produced a lot of new growth. It makes me think this plant may be a bushy plant. According to FB website: "This lady grows stout and bushy, reaching around 150cm while displaying a compact yet robust appearance with wide inter-nodal spacing. She will develop a thick main cola with fat side branches all around while not requiring much maintenance. She can produce up to 650 gr/m2 in around 10 weeks, putting her among the highest-yielding strains we’ve ever created."

Flowers are on! 🌸🔥 Flowers are clearly visible now, with one of the plants already showing a strong purple colour — very curious to see how this develops! 💜 However, the top-right plant is looking a bit limey, so I’ve ramped up the nutrients while keeping an eye on the runoff. It’s also showing tiny spots of calcium deficiency, so I suspect it might be a root issue. These deficiencies are minor, though — overall, the plants are still going strong. Probably the most impressive autos I’ve run so far! 🚀🌱 Stats so far: 💧 Watering: 1.5L every other day 💦 Humidity: ~65% RH 🌡️ Temp (lights on): 22–26°C 🌡️ Temp (lights off): 20–22°C 📈 Avg. VPD (lights on): ~1.2 kPa

I feel sorry for my plans this 2 weeks I haven't been able to look after them properly I've been working long shift with Christmas approaching there's no time for anything so I was pushing in a lot of nutrients into them and I caused a nutrients lockout .I have flush them out with just clean water at the right pH 6.5 and they are responding very well from now on I will continue to Baby them so they gave the best result possible within the circumstances of the plants. Thank you for reading I will continue to update have a happy grow

This was a fun project that was a few years in the making and a year later to see if they would last a season for this upload to happen. Before any of this I would bike aorund town grabbing up all the old Ikea solid pine bed slats that I could find and storing them in the basement. I have a lot of wood down there, any size worked as long as I have enough of them. The hot days to find them were the first and last of the months because that's when people where moving in/out. I also kept an eye on the free section on local online classifieds as well. The entire purpose of this was to recycle as much off the streets as I could before buying anything to finalize the project. In the end I only bought sealer, screws and some takeaway/beers. All the wood was 100% free and salvaged off the streets of Toronto saving it from the dumpster bin. After collecting all the slats for about 2 years I was playing aorund with them on how I wanted to make this work. I had previously done a little project like this before but I messed it up and the boxes where crap. did not last longer then 2 seasons, they where thin and shallow as well could not grow much of anything in them. I Was talking to my friend who is renovating their house and we brainstormed some ideas on the boxes, I found some designs I liked online and said lets make something like this out of what I have here. We tossed out a few of the design features when looking at them as it would have been wasted wood and extra work not needed. If I had more wood them maybe it could have been an option but simple was the name of the game. They taught me what I needed to know like how the miter saw and sander worked, plus all the other tools I was using. They did help out with a table saw and creating the triangle support joints in the corners, They used some pine left overs they had while making a staircase indoors. I did not feel up to the task of using a table saw given all the relatives I know who have lost a finger to them. In the end we decided the design would be three boards high and take an alternating pattern on corners. layer one short, layer 2 long, layer 3 short. Went with a galvanized and painted deck screw so it can take the weathering. Ran into some problems like making everything level as some of the boards were warped and other ones had undesired aspects like knots and tacky sticker goo I could not remove. So I used them for the base that will not been seen so much. Clamped everything down and called it a day. Once it was all done and over with, I then brought them back home from my buddies work garage and started to seal them. I went with a boiled linseed oil as its a food safe option should the wood degrade into the soil I will plant in them. I will need to reapply it to the boxes year after year but the main coat is the most important one and I put it on 3 layers with a good dry in between coats. the inside of the boxes that where coated did not degrade at all as the sun did not hit them so it will not need a new coat just the outside. Overall the end result was very impressive for myself, I've never taken a woodworking class ever and It was a near perfect outcome for me. Heavy Duty Planter Boxes for all my gardening needs. I made a last min decision to add in a plastic liner to preserve the wood even longer and stapled that into the frame. it has held up quite well and may need replacing end of 2nd or 3rd year out in the sun. Used a thick moisture wrap plastic with UV protectors in its formula. Lets see what I can grow in them this year! m0use's haus of projects - garden box edition

Welcome to my Pablø Escøbar Diary. In this diary: Seeds sponsored by: Ðivine Șeeds Media not sponsored😄 Nutrients not sponsored🤪 Light sponsored by: Şun☀️ ___________________________ Feeding: No feeding since may 20th.. Pablo is kinda slow🤫so i won't force feed her and today May 26th it poured rain all afternoon. So Mother Nature did it for me😉 ___________________________ Past week was very warm and she loves the outdoors ... Perhaps not so much with todays wind gusts🤣 ___________________________ Thanks for stopping by, likes and comments are appreciated!👊🏻😎 Keep on growin! Keep on tokin!!! 😙💨💨💨💨💨

Lilac Diesel RBX2 Both plants smell diesely but the pheno with sativa like bud structure smells way stronger and has sweet pineapple notes along with a strong musky scent, I dried a small amount of it and i gotta say that this is the strongest tasting flower I've ever smoked in my life! Sweet pineapple inhale with a sharp diesely exhale. ALL ORGANIC NUTRIENTS USED!! GAIA GREEN 4-4-4 AND 2-8-4 WITH SOME ORGANIC SEAWEED EXTRACT WATER AND MOLASESS! ENDED UP BEING BETTER THAN ALL THE STUFF I GET FROM THE DISPO HERE IN MA! STRONGEST TASTING BUD IVE EVER SMOKED/VAPED AND IVE BEEN SMOKING SINCE I WAS 14!

👨‍🚀Salut les copains,👋 🌞 Nous sommes au 38ème jours de floraison, Lors de ma visite j'ai été surpris par le changement de couleur de quelques feuilles sur les plantes. 🤔 Je n'ai pas beaucoup le temps de m'en occuper en ce moment, je passe juste les arroser et prendre quelques photos. Intensité de la FC3000: 90% Ventilation : Extracteur mars hydro 6 pouces avec filtre à charbon puissance : 4/10 (24h/24h) + 3 ventilateurs à l'intérieur ( ON 8/24h). ils s'activent à un horaire différent. J'arrose environ tout les 4-6 jours avec 1.5L d'eau. (+ 1gr de bioenhancer/L eau un arrosage sur 2) Venez me voir sur Instagram ✌️ https://www.instagram.com/hou_stone420/ 🌺💃❤️️❤️️🌺❤️🌺❤️️❤️️💃🌺

All came through on the same day. Just waiting for the Barney’s Farm Runtz Muffin, hopefully will sprout soon! Runtz Muffin came through 2 days after the rest

Hallo - Den Befeuchter befülle ich aktuell alle 2 Tage. Wichtig ist! (Immer mit destilliertem Wasser) Tag 22 : - Die Pflanze sieht sehr vital aus und hat ihre Größe so langsam erreicht, sodass ich die Pflanze toppen kann. - zusätzlich habe ich die „Keimblätter“ entfernt. Tag 23 : - gegossen mit 250ml (Düngermischung) Tag 24 : - kurz bevor es dunkel wird einmal IPW angewendet (2,5ml auf 1 Liter)

These photos are from week 1 flower to my current week 8 of flower. I came into flower with a ton of leafs with being a new first time grower I was very hesitant on stressing the plant out. In week 4 of flower I was playing around with my PH levels and found that the sweet spot was 6.3 it started to eat so much food my PPM were 1240 and it started drinking about 2-3 gals a day. I also noticed and with some help I was bleaching my top nodes a little bit my ppfd was at 1100 in some parts of the canopy so I raised the light up to 20” and dropped my ppfd to 800. In week 4 the smells started coming out and the next day I came down with covid and lost my smell... I was sad. I regained my smell and holy moly it smelled like you opened a fresh box of fruit loops with a hint of lemon I was amazed!!! And couldn’t get over it. Current week 8 the plant is smelling amazing and the buds are stacking and chunking up so nice... well at least I think I don’t really know how it should look since it’s my first grow and at this point I’m so excited to get though this grow and have success.

Hello my friends 👩‍🌾👨‍🌾, This 8th flowering week was good 👊, maturation Buds continue 🌲❄️, I thought it will be the last week, but need one more. The end is for this week end I think, for moment trichromes not really full milky, and I like something like 20% amber. I've started flush with flash cleaner The senesence is started on the #2 and #3. 💦 1 Watering this week 1.8l/plant . Water + flash cleaner PH@6 Lamp @100% Thanks community for follow, likes, comments, always a pleasure 👩‍🌾👨‍🌾❤️🌲 See you next week 👊👊 Mars Hydro - TS 1000 https://www.mars-hydro.com/ts-1000-led-grow-light Mars Hydro - FC3000 https://www.mars-hydro.com/fc-3000-samsung-lm301b-led-grow-light Mars Hydro - SP3000 https://www.mars-hydro.com/sp-3000-samsung-lm301b-greenhouse-led-grow-light The High Chameleon - Vannila T https://www.thehighchameleon.com/shop/vanilla-t-5

Día 77 y final para esta Wedding Glue que ha brindado unos frutos hermosos!. Manicura y cosecha para posteriormente secar y curar estas densas y rocosas flores bañadas en brillantes tricomas, fragancias dulces tipo torta cubren todo el ambiente y una pegajosa capa de resina me impide abrir mis tijeras con facilidad, realmente una sabrosa cosecha! Volveré después del curado para dar un informe de cosecha detallado. Buenos Humos! 👽

This was a lost grow from dudding disease that got brought over from another run, it did not come from AMS. Plants were destroyed. Thank you Spider Farmer, and AMS. 🤜🏻🤛🏻🌱🌱🌱 Www.amsterdammarijuanaseeds.com Thank you grow diaries community for the 👇likes👇, follows, comments, and subscriptions on my YouTube channel👇. ❄️🌱🍻 Happy Growing 🌱🌱🌱 https://youtube.com/channel/UCAhN7yRzWLpcaRHhMIQ7X4g Spider Farmer G300w: https://amzn.to/3S2zvsd Spider Farmer 10X20 Heat Mat Kit - https://amz.fun/lsa0J Spider Farmer Amazon Store: https://www.amazon.com/spiderfarmer Spider Farmer Official Site: https://spider-farmer.com Discount code: saveurcash

Floración avanzada con carencia de NpK.