This is my first Ganja farmer run and so far im loving it!! She is not as thick a big and full as I usually like them but she is definitely showing promise!!!

Lights are down to 28 inches, only running blue spectrum the first 14 days. Will begin nutrients and full spectrum beginning of week 3.

Update coming.

Start Flush

Stacking nicely as we finish off week 7 of these two 420 fast buds Gorilla Glue autos.

I would recommend more stability in the pack I got all 3 was different phenos but terp wise both was home runs there making moves with flavor the size was always the biggest autos out there it was the terps that was missing but I believe that's changed now both #6 #10 are full of flavor u wont be dissatisfied 100% if u hit that one SHE WILL GET BIG buds were really dence on these but the FRUITYNESS is wat will make this a top strain to come✍️✍️✍️✍️🔥🔥🔥🔥🔥

Bulking up

15 days on flower... lolly popped them... My first diary next one will be much better. If you have any questions please dont hesitate to ask.

THIS IS ONE SEXY CUP! Lower temps are really bringing in the Fade! I probably wont do another solo cup grow simply bc this one turned out so damn good!!!!!! My only regret is that i gave my friend DYNOMYCO (he transplants, i dont) in the pot! imagine what it would be with the BOOST!

FOR EVERYTHING MARS HYDRO VISIT: www.mars-hydro.com www.marshydroled.ca PROMO CODE: rocknroll VISIT THE ALIEXPRESS STORE: @marshydro_aliexpress Instagram: @marshydropenny Thanks for taking the time to read and check out my diary🤜🤛 REMO NUTRIENTS 👍 TS3000 FEATURES: WIDEBAND SUNLIGHT FULL SPECTRUM LED GROW, Infinite close to natural sun light, suit for all plants whole stages indoor growing, rapid plant response from seed to flower, achieve maximum quality and quantity, much better than traditional HPS grow systems. HIGH REFLECTIVE & NOISE FREE-Fanless LIGHT BOARDS design will make your growing life easy and quiet, quickly heat dispersing material aluminum reducing light lost to aisles and walls, increase the light intensity up to 20%, allowing your plants receive more energy and without burning your plants for maximum headroom. HIGH EFFICIENCY ENERGY SAVING PLANT LIGHT, high-power NEW LED grow, Compares to traditional 3000 watt HPS lamp and other brand led grow light while only 450 watts true output with 1016 LEDs, more scientifically and energy-efficient! Perfect for 5' x 5' veg stage, 4' x 4' bloom stage, higher intensity in a MARS HYDRO grow tent, reflective area, or by crossing over using multiple TS3000. BOOM YIELD LARGE GROW LIGHT, NEWEST SMD LED technology provide highest PAR/LUMEN output(1095.6umol/), makes you get 30% higher yield compare OLD led lights, can get max yield at 2.5g/watt, less pay but get more yield, bring a amazing grow trip to any home grower as it beams huge amounts of light energy to plants below. COMMERCIAL LED GROW LIGHT, Updated easy dimming & daisy chain function, main light controlled, especially come with two waterproof and dimmable Mean Well Drivers, auto sensing power supply works on both 120VAC and 240VAC and 277VAC, suit for Large Rooms and Commercial Setups. Low Energy-Consuming LED Grow Light: Consuming 300w and also mounted with 1016 chips, TS3000 has the ability to replace a 450w HPS light while reducing 40% power intake. High Efficiency LED Grow Light: With overall light output PPF 343umol/S as well as amazing PPE 2.3 umol/j, it's 50% even more photon efficient and can assure a 30% more return than the old HPS/MH lights. Patent Highly-Reflective Hood Shape: The reflector design on TS3000 is patented, which can effectively gather the light dispersed in all directions to enhance its light intensity as well as assist plants in absorbing more light. Full Spectrum Plants Favorite Spectra: By the unique mix of spectra that makes most light in the 400-700nm waveband, incredibly conducive to plant photosynthesis. Adequate IR(730-740nm) is additionally consisted of in the range to generate larger buds. Dimming And Daisy Chain Feature Available: Upon an independent dimming button on the external driver, backing 0-100% settings adaptation and up to 30 LEDs daisy-chained in a group, it supplies different light levels for various plant stages meanwhile saving energy. Safety Certifications And Service Warranty: CE, ETL, RoHS, UKCA security certifications accepted, 50,000 hours durability, 5-year service warranty, and local after-sales repair 5x5 GROW TENT: LOCK ALL LIGHT INSIDE MARS HYDRO Indoor Grow Tent interior is made of diamond mylar which is highly reflective. (Other brand's mylar and reflective rate is as low as 50%, won't provide efficient light. )MARS HYDRO 1680D canvas, being double stitched, it is tear proof and has perfect light locking. Mars Hydro's grow tent keeps 100% lighting beams inside and helps your plant absorb more lights. EXTRA-THICK --No light leaks or rips at all DURABILITY GROW TENT Stable metal corner adapters and poles are the trustful supporters of the tent, standing sturdy, neither rusting nor paint-falling, quick easy tool-free installation. Mars Hydro's heavy-duty metal zippers, with double layer black lining, are the best on the market which create a light-proof seal EASY OBSERVATION FOR YOUR PLANTS. Special observation windows are made by double layers of cloth. Observe the growing conditions of your plants without opening the tent and avoid disturbing plants. The observation window also serves to dissipate heat and ventilate air AUTOMATIC 6 INCH EXHAUST FAN KIT W/ CONTROLLER: Mars Hydro 6'' Inline Fan uses a mixed-flow design to maintain peak performance in a high static pressure environment. GROW TENT FAN: MARS HYDRO inline fans are designed to ventilate hydroponic grow rooms, transfer heating/cooling, cool AV closets, and exhaust odors. EFFECTIVE VENTILATION: Variable speed controller for easy fan speed adjustment. Optimal ventilation for your planting. LOW NOISE LEVEL: Durable plastic fan housing and blades for extremely low noise(32dB-A); create a truly quiet growth environment. EASY INSTALLATION: Removable duct ends with locking tabs for quick removal and easy maintenance and a cord length of 4.9 feet for hassle-free setup. This grows tent fan with a controller for easy fan speed adjustment. BASIC PARAMETERS: Ventilation exhaust fan size: 6” | Dimensions: 315mm*225mm*210mm. | Weight: 2.7. | Airflow: 402CFM | Noise: 32dB-A | Bearings: Dual Ball. 

Day 70: Watered the plants 0.5L without nuts, 4L total, 170 ppm, 360 us/cm, PH 6.5 Flushing from today Day 73: Watered the plants 1L without nuts, 8L total Day 75: Watered the plants 1L without nuts, 8L total

Week 1 Day 1 - 8/12/2023 1st Water change Day! Such a special time it is when you remove the little bit of Nutes that you gave them as an appetizer and you give them their first real meal. Added 39 Gallons of Water to my system SILICA= .5mil/Gal = 19.5 = 20mil Root Drip = 1mil/Gal = 39mil Cal Mag= .25mil/Gal = 9.75 = 10mil FLoraMicro= 3.0mil/Gal = 114mil FloraGro = 2.0mil/Gal = 78mil FloraBloom = 2.0mil/Gal =78mil ORCA= .5mil/Gal = 19.5 = 20mil Week 1 Day 2 - 8/13/2023 Everything is looking good the roots are making their way to the water and the new grow is looking nice and green. Week 1 Day 3- 8/14/2023 Everything is right on track, they are looking beautiful and in the praying position all leaves happily lifting towards the light. Week 1 Day 4- 8/15/2023 A little worried today her birth Twin the BA I am growing out is looking great and is raised towards the light and this one is just slightly under.. Will keep an eye on Her. Week 1 Day 5- 8/16/2023 Walked in and the humidity was under 60.... ohh noooooo.. So I added 2 humidifiers to the tent and attached them to my InkBird controller which is set to 62. Also looking at the roots and she has some poking out the bottom but just not in the water yet.. Luckily we are set for 14 days before next water change so the system will stay stable and her sister already has roots in the water so she should only be a day or two behind.. we will just keep tracking but she is delayed. Week 1 Day 6- 8/17/2023 Roots in the Water!!! Huston, we have a successful launch. This grow is on! Humidity was a little low this morning so I refilled the humidifiers. Other than that the temp looks great, the PH looks good, the PPM looks good the plant is in the praying position and all damage from the little drowning from over filling the cloning machine seems to have been fixed. Happy Happy. Week 1 Day 7- 8/18/2023 Yay.. week 1 in the books, roots in the water growth has started. Everything for growth and environment is looking good and on track, there are a couple of mutations with this Lady will keep an eye on those leaves. IMO this grow is going A lot during this week 1 then week 1 of the last grow when I had them drowning. Really excited on how this grow is going to come out.

To update...

Bueno , este es el segundo cultivo que realizó del la cepa "Waka" , el anterior lo tengo igualmente documentado en otro diario . en esta ocasión cultivamos los clones que habíamos recolectado del cultivo pasado , guardando los fenotipos que nos gustaron más y los clones restantes los pasamos a floración que fueron los que se le hizo seguimiento en este diario. El crecimiento fue bastante explosivo y reaccionaron muy bien a cada trasplante realizado . pude observar que los clones de cada fenotipo seleccionado se desarrolló con mucha similitud al de sus madres . El olor en vegetación es bastante discreto y en floración se pone un más intenso El desarrollo en floración fue explosivo generando bastante resina y se vieron muy hambientras . Al fumar se puede sentir un rico toque cítrico en las N° 4 se siente un fuerte sabor a limón en algunas flores mucho mas marcado que en otras, N° 3 y 13 un agradable toque a naranjas muy rico de sentir en el paladar , La N° 8 con pizcas dulces bastante interesantes. El humo al fumar es muy suave lo que permite sentir mejor el sabor de cada fenotipo.- saludos y buenos humos😉 Al momento de cosechar se cortaron los clone y se dejo secando en oscuridad a temperatura ambiente por cerca de 16 días posterior a eso se pasó a curar en frascos

I already imagine it with a lot of summer sun ... 100% recommended ... I will grow one of them again ....

Scrog baby Test läuft gut. Die Marshydro hat 10 Watt mehr deshalb wird sie aber nicht gedimmt. Da die SANlight bessere Ausleuchtungen haben für die Pflanzen.

Day 38-44: - #1 10cm growth; #2 5cm growth - adjusting lst every few days - 2l every 2 days

Week 7 (13-3 to 19-3) 13-3 Temperature: 24.2 degrees (lights on) 18.5 degrees (lights off) Humidity: 65% (highest) 52% (lowest) 14-3 Temperature: 28.2 degrees (lights on) 19.5 degrees (lights off) Humidity: 57% (highest) 44% (lowest) Today i refilled the reservoir with 15L feed (1L + 0.2 ml Silica + 1 gr Calcium + 0.7 gr Grow) EC: 1.3 PH: 6 One wavemaker already broke on me, luckily i bought 2 so i replaced it with a working one. 15-3 Temperature: 28.5 degrees (lights on) 21.1 degrees (lights off) Humidity: 60% (highest) 46% (lowest) 16-3 Temperature: 28.2 degrees (lights on) 19.7 degrees (lights off) Humidity: 59% (highest) 45% (lowest) No pictures. Adjusted the distance of the light to 40/50 cm (depending on hight of some tops) 17-3 Temperature: 27.8 degrees (lights on) 19.7 degrees (lights off) Humidity: 62% (highest) 44% (lowest) 18-3 Temperature: 28.1 degrees (lights on) 20.4 degrees (lights off) Humidity: 62% (highest) 44% (lowest) Today i cleaned the reservoir and added 15L. (1L + 0.2 ml Silica + 0.5 ml CalMag + 0.46 gr Grow) EC: 0.9 PH: 6 19-3 Temperature: 28.2 degrees (lights on) 19.9 degrees (lights off) Humidity: 69% (highest) 43% (lowest) No pictures. Today i installed a new SCROG net, this one is much better then the one i used before.