Likes
Comments
Share
@RFarm21
Follow
Week 22/11 - 28/11 Feed: Just water
Likes
7
Share
Likes
2
Share
I've given triacontanol a whirl I don't have a control to compare to and I've gone from coco to dwc but there is a shitload of tops emerging , its paste I've used at a rate of 1g to 20l of feed I've only hit her with it twice once in veg and just in wk 1 of flower it does make the feed frothy but not to a problematic point from what little info I've found less is more with it I've backed right off with part a and upped part b of the hydrocrop and next feed is pk am aiming for 1gpw if I manage that il be 😊
Likes
13
Share
@Guillhemp
Follow
Han estado creciendo 4 semanas (1Mes) con tan solo 260w full spectrum LED. Hoy las paso a floración y aumento hasta 611W añadiendo los COB.💪
Likes
4
Share
Wedding gelato, very chunky plant and she is doing well considering the heat we experiencing recently, beautiful strain overall excited for the final outcome !
Likes
2
Share
The Afghani x Mac1 auto from DNA recovered well from the training and is in full bloom. Bud sites are looking great. Had an issue with humidity this week and the leaves started looking rough. She got a dose of Recharge this week and drinks about 8-12oz of water throughout each day. All in all she's trucking right along. Very happy with how smooth this solo cup grow is going.
Likes
4
Share
@sllybilly
Follow
Running about 1050-1100ppm nutes. Added a bit liquid koolbloom. HST here and there to get spacing out. Heavy defoil Generally I wouldn't do such heavy stress at this point but its ok. Look at that bounce back the next day. Running 1 120W 2700k qb 266 and 250w 3500k qb respec
Likes
22
Share
@valiotoro
Follow
Sooooo impressed with the size & quality of the buds😳 Super dense & sticky✂️ The smell is sweet fruity mix berries🤤🍓
Likes
29
Share
@Sidbank
Follow
2.06 I switched them on! They started to grow :). 7.05 after switching to flowering they started up. I saw a little deficiency of calmag. I added 1ml of CalMag Agent and 3 days after it disappeared. The tops become slightly lighter (which is a common deficiency and not dangerous), which means a lack of manganese. Today it's watering time, I'll add some trace elements from Canna, to fill up the manganese, Soil Attack for the flies and water them with 0.7L. I will also stabilize water pH for 6.0 8.05 To combat manganese deficiency, I add Trace Mix by Canna and i see a few flies so i added Soil Attack, and stablize pH 6.0.
Processing
Likes
18
Share
Here's her weekly update. Dawg Daze at Day71/W10 from seed . She just ended her 5th week of flowering. She standing at 22 inches tall after some final LST training on the side colas. Removed some lower fan leaves that where not getting light. Kept the temps between (day)80°-65° (night). And kept the humidity at 30%-45% I removed my companion plant pot to lower the humidity level and give more space for growth since she's reaching her final weeks of flowering .. grown in a 3x3x5 tent under 2x 100w closet case LED in a 3 gallon smart pot. Using kindsoil supersoil only with cocoloco bush doctor and Fed only Tap water every 2 days as needed. She's starting to fatten up now n her scent coming off her is sweet with a hint of lemon. She's starting to pick up some purple violet color on the leaves . Excited to see her finish. .will update next week on her growth. Enjoy.
Likes
72
Share
@Roberts
Follow
Auto Maxi Gom started bulking about a week ago. She is starting to develop some resin as well. She has been eating and drinking well. 🤞🏻the colas get nice and thick. I slightly increased the feed, beside that there is not much else going on. Just waiting. Thank you Xpert Nutrients, Medic Grow, and Seeds Mafia. 🤜🏻🤛🏻🌱🌱🌱 Thank you grow diaries community for the 👇likes👇, follows, comments, and subscriptions on my YouTube channel👇. ❄️🌱🍻 Happy Growing 🌱🌱🌱 https://youtube.com/channel/UCAhN7yRzWLpcaRHhMIQ7X4g
Likes
4
Share
"Der Himmelgeher! Der Skywalker lässt sich nicht lange am Boden halten und macht nur seinem Namen alle Ehre. Er reckt sich der Lampe entgegen, wie eine Sonnenblume. Er hat bereits viele Blüten die nur schwer zu bändigen sind. Die schlanken Blätter lassen auf eine leicht sativalastige Genetik blicken.
Likes
4
Share
Oh, I am nervous. Its my first time in a long time...…. hopefully this doesn't end as bad as the first time these feelings came up. Very quick and very disappointing.😅 11/26- At around 7:30pm these autos got put into Ice Mountain Spring Water temped to 68 degrees. After just 3 hrs 2 have already sunk to the bottom. 11/27- Its been 12 hrs and all but 1 of the Cinderella Jack have dropped. 11/27- The last straggler sunk after 18 hours. At around noon, I transferred the seeds into paper towels. Then put the paper towel into small baggies. 11/29- Seeds have been germinating in paper towels for around 30 hrs. They are starting to show taproots. The Fastbuds are just that FAST. They were showing taproots in under 12 hrs. One was over a half inch. 11/29- At around 6pm, I transferred these little ladies into a cup and a half of some naked Happy Frog and placed in the germination dome. 11/30- At 2:30am these gals got their first dose of light. Since I'm a born again grow-virgin and have never messed with autoflowers. I'm going to just keep the traditional 18/6 lighting schedule. 11/30- With less than 6 hours of light I already have 2 sprouted around 1 inch. The Fastbuds green crack seeds seem to be outperforming the others. The Dutch Passion seeds are performing too but the Fastbuds are impressive. Note: These seeds are germinating under a 7.83hrz frequency. It is coming from a small 4" subwoofer connected to 2 small speakers hung in the top corner of my tent. I plan to continue though to harvest. My thinking that if our goal is to mimic the conditions outdoors why not amplify everything we can. 7.83hrz is the natural frequency omitted by the earth and can be nothing but beneficial. To my research it should help the plant develop on a molecular level.
Likes
8
Share
Likes
24
Share
Vegetation: To keep temperature and moisture on optimal levels at around 23°C / 65% I'm using two mechanical timers. - 24/7 on: Fans and water pumps (+Ventilation after 3.11.) - Timer 1: Lights and Humidifier 18h on / 6h off - Timer 2 (BROKEN 3.11.): Ventilation 18h (15min on / 15min off) / 6h off NOTES: Everything looks good and the roots have appeared from almost every (11/13) rock-wool cube. From now on I'll mostly water the plants from bottom by adding the wanted amount of nutrient solution on a plate, and then placing the plant on top of for ~15seconds This week I'm also starting to prepare the hydroponic systems (2x NFT-GT90, and 1x EBB-flow I think) and stronger nutrient solution since my plants are becoming ready to be transferred. Spreader-mat is the base of my plants when I have transferred them in to the hydroponic systems. DO NOT place more than one layer of the spreader-mat as it is not meant to be used like that! As you're cutting the mat for NFT's, be aware to have some extra for your peace to reach nutrient solution below the tray. That way you won't get noise from water dropping when systems are turned on. Day 15 (1.11.) Day 16 (2.11.) First watering with a bit stronger nutrient-solution (~ EC 0,6 / pH 5,9) than before, starting with 50ml/plant and watering once from above. Slowly increasing EC to 0,8. I cleaned and assembled 2 out of 3 hydroponic-systems which I'm going to use. I'll do the same also to the last system, but it currently has my plants on top of it so I'm going to do it later. I want to make sure that my plants have built healthy and big enough root system before transplanting to hydroponics. I'm waiting for the rock-wool cubes to be bursting of roots so they won't drown on their first day in hydro. Also, as the plants are bigger before the transplant, I'm able to fill my nutrient-solution tanks full with correct strength nutrient-solution for Mid-Vegetation from the start, therefore no need for that much adjusting later on. Day 17 (3.11.) I noticed my other timer which controls the lights had stopped working... The lights were on when they shouldn't have been, I noticed it an hour after they were supposed to turn off. I think I caught up to it early, but it may have been on for maximum of 2 days straight. No worries there since on vegetation-phase the plants don't necessarily need any sleep (Even though you should avoid quick changes like that!). Roots have appeared from the bottom of every cube and plants are looking pretty healthy. I think they are almost ready for hydroponics. Day 18 (4.11.) Few plants are showing symptoms of nutrient deficiences or some sort of sickness, not certain what exactly. I'll be keeping an eye on it. I'll be transferring in to hydroponic systems in maybe a week, so I don't want to stress my plants more than what's necessary. Increased my solution strength to 0,9 EC with a bit more Cal-Mag than before, and watered the plants for 50-150ml each plant depending on weight and size. I'll be slowly increasing the strength by around 50% during upcoming week. Thanks for tips! Day 19 (5.11.) Day 20 (6.11.) Plants are recovering well from deficiences and I just transferred all of them to hydroponics. I don't have the water pumps on for 24/7 just yet, at this point I water them a couple times a day by keeping the pumps on for somewhere around 15min at a time. Lights are now set to 60% and I also added a tower fan to circulate the air and shake the plants. Day 21 (7.11.) Lights are now set to 70% since the Led's and plants are spreaded wider in the tent than before. Distance to plants stays the same at 75cm.
Likes
5
Share
Very happy with how this lady has performed, amazing quality buds, very sticky and dense flower with a concrete smell that I love so much, which is that kind of fruity sweet flavor that this lady is able to produce, it's been a beautiful journey, I'm gonna enjoy a lot this flowers. Very recomended guys!