Likes
Comments
Share
Likes
79
Share
@valiotoro
Follow
She’s almost ready! I’m planning a 1–2 week flush before harvest. The buds are looking insane super dense. Can’t wait to take that first snip!😈😈😈😈
Likes
88
Share
@Roberts
Follow
Gorilla Jealousy F1 has fill in well over the last week. She got her roots pruned today. Along with some lst, and defoliation. She has been growing really well. I will likely move her into my small tent once the photoperiod in there now is done flowering in 3 weeks roughly. My plants have flowered really well in that tent, and environment. Nothing more to report at the moment. Thank you Spider Farmer, and Seedsman. 🤜🏻🤛🏻🌱🌱🌱 Thank you grow diaries community for the 👇likes👇, follows, comments, and subscriptions on my YouTube channel👇. ❄️🌱🍻 https://www.seedsman.com/?a_aid=Mrsour420. This is my affiliate link to seedsman. Thank you Happy Growing 🌱🌱🌱 https://youtube.com/channel/UCAhN7yRzWLpcaRHhMIQ7X4g
Processing
Likes
8
Share
Pfff, explicaros que estas green ak xL son una variedad bastante difícil de cultivar, los cambios ambientales le sientan fatal, y hay que tener cuidado con la alimentación ya que se Sobrefertiliza fácilmente así que ojo, eso por un lado. Por otro si eres un cultivador con varios años de experiencia y todo te sale bien, es probarla, porque el sabor de esta cepa compensa la dificultad de su cultivo. Thc hasta 18% , sativa predominante. Genéticas: Afghan x Colombian x Mexican x Thai Landrades.
Likes
Comments
Share
@Cyabro
Follow
Yo wassup guys, starting little bit late the diary but this you cant miss flowering day 19 and they are crazy snow!
Likes
Comments
Share
March 10 - 17, 2025 Lots of activity and growth in the tent this week. After resolving two run away events with the Blumat system and the carrots in Anastasia and Carol Anne that I think are finally resolved. Anastasia’s moisture curve is between 90 - 110 mbar. And the other two are also stable. They are going through about 1/4 of a gravity feed 5 gallon bucket mounted 5 ft above the soil and outside the tent for easy access. I am now mixing a bucket batch with 2.5 gallons of plain RO water ph leveled to 5.8 with an average temperature in the low 60 degrees. I am still using the 10 part - General Hydroponic nutrient line feed chart on week 4+ moderate feed and am mixing into two gallons on RO water with an average temperature of 60ish. Using the following nutrients in the exact order which is important to follow to avoid mixing issues. 2 gallons fresh Reverse Osmosis filtered water with a base zero EC level. Silica = 5ml Calmag = about 4ml General Hydroponics Flora Series 3 part nutrients: FloraMicro = about 11ml FloraGro = about 14ml FloraBloom = about 8ml Additives: - General Hydroponics FloraBlend = a out 10ml - General Hydroponics Floralicious Plus = 3ml - House & Garden HGDPC002 Drip Clean = 8ml Last step is to level ph to 5.8 My nutrient batch ends up at 5.8 ph with an EC level of 2.0 at about 60 degrees f. I then pour the 2 gallon nutrient mix into the 2.5 gallons of plain RO water to dilute the solution per sustainable village blumat system recommendations. The final batch usually requires a final ph spot check and minor adjustments. So far the planned schedule based on a current 4 day depletion rate will be to start with s fresh mixed batch as mentioned above. When the bucket level reaches 3/4 empty i replenish the bucket to 1/2 full using plain RO water ph leveled to 5.8. Then top off the bucket with another 2 gallons of nutrient rich mix as mentioned above. This increases the EC level to about 1.25. Then on the second reservoir depletion I will let the bucket drain to close to the empty level without letting it go dry. After the 2nd replenishment is almost gone i will do a 3 gallon hand watering with a mix of Real Growers Recharge - Mycorrhizae Instant Compost Tea/Soil Microbes mixed into each 1 gallon poured into each pot. This achieves 3 things, the first are the obvious benefits of better nutrient intake. It also allows for a good drain to waste to help flush salt buildups. Lastly it saturates the pot moisture levels down to the low 70-80mbar range and essentially temporarily deactivates the blumat system and prolongs the call for water and nutrients from the reservoir for an extra 12-24 hours until the pots dry out to the blumat carrots calibrated settings of about 110-120 mbar. I will have to adjust as I switch to flower but overall, now that the blumat system is dialed in and I understand it better I find tat it is very effective at keeping the tent environment more stable ad efficient. The plants seem happy as shit and maintain Ing a reservoir with a bi weekly hand watering flush is so much better than my old ways of mixing 2-3 gallon nutrient batches and hand watering/feeding and dry vacuuming it all up every two days is way better and less wastefull and more sustainable. So far It appears it was worth the investment and the test of my time and patience. The week was also full of a few defoliation snd lollipoping with plenty of scrog net low stress training to continue to fill out the canopy. Drizzella (right) is still stealing the show and dominating her presence in the tent with 30-40 potential cola points. Anastasia (left) is smaller than her sister but is responding well to all the LST and defoliation. DD he has significantly less potential cola points, but her fan leaves are larger but also softer or more silky feeling. Carol Anne (middle) continues to be a short stubborn and mesmerizing cultivar. She resembles a head of lettuce and is so strikingly different than her two cousins. I rounded out the week with continued VPD monitoring to maintain about 1 kpa with an average leaf temp offset of -3 degrees. I then pulled the Vivosun Aerolight 150SE led light from my smaller and currently dormant 3x3 tent and installed it in the 3x5 tent. Even though the AC infinity Ionboard is doing the job on its own. I added the second light for better light distribution across the tent as I was getting good DLi levels in the 30s in the middle of the tent but it tapered off to low 20s near the walls. After adding the second light I am now achieving PPFD rates of 500-600 and DLI levels in the low 30s from wall to wall and i think it will make a good impact on growth and a more efficient tent environment as The added circulation from the built in fan on the light, as well as increased heat generated from the lights is demanding less from the heaters.
Likes
43
Share
@GrowerGaz
Follow
Really nice strain , still not figured out why it autoflowered. Hints of sweet cheese and that lemon citrus from the jack H
Likes
2
Share
11/29/22: Just switched her to flower about 4 days ago and started with bloom nutes.. was struggling with ph again past few days trying to level out again seeing some signs of lockout so flushed her with water and lite cal-mag she is looking better today.. she's really starting to stretch out hoping my tent is going to be tall enough with light hanging but we will see.. this is actually a pretty tough plant to grow but I'm gonna get her..
Processing
Likes
41
Share
@Hawkbo
Follow
The big one and the second big one are interesting, the small one idk about. my ph meter broke and Hannah Instruments sent me a new probe. When I got it and checked run off everything was fucked up so I did a heavy flush on everything and a feed. Found some shit called Gnatrol on Ebay for the fungus gnats larvae added to the mix idk if it will work tho. Pictures were taken on Day 7 of Bloom
Likes
2
Share
Started to defoliate and lollipop her slowly, cut back on nitrogen completely and will only be using a tiny amount of Micro and Big Buds nutrients for the remainder of the grow.
Likes
43
Share
Now that V started, both ladies have began flush. Nemo actually started early last week since (20 ml heavy 16 finish and 1 gallon of RO watrr per feed). Nemo on left, a little less directly under the light is more developed, both bud structurely and trichome color (clear transitioning to cloudy or milky trichs more each day). V on the right side is much less finished, being a more haze influenced pheno. it seem lankier and slower to finish, however severe light stress from being grown up to close to light has bleached maybe 6-10 tops of the 15 tops on v. nemo will be done sometime later this week or early next week. Going to harvest the tops entire plant on nemo, then rewaeave V back thru the scrog to allow greater distance to light and better airflow for it to fill in a little more and finish up over next 2 weeks or so. will be closely monitoring bud sites in top colas to harvest when trichomes are almost fully milky white, just before amber.
Likes
80
Share
Hi all. Welcome to this run withbthe Viparspectra XS1500 which i was kindly sent to try by their helpful rep Valerie. As I have a fairly good space to use for my main grow , it seemed an ideal time to explore a few options while I wait for space to appear following upcoming harvests. The opportunity hit at a good time and has now driven the future play time. lol The light is a full spectrum 150W( at the socket) , Dimmable and very well made unit. As summer is here now , my concerns of more heat being an issue have stopped me from adding my other light so the smaller 2ftx2ft area covered by the XS1500 is a good option , The heatsink is built into the case design with a finned top to dissipate the heat so no noisy fans. Switching it on to full power was a nice surprise as the footprint was way wider than I had expected and the actual coverage is even better for my Nursery to harvest plan.... I am growing autos perpetually at present and have been able to throughput the plants with just 2 lights and using the overlaps at the edges to bring seedlings along to veg/flowering, as harvesting is finishing. The timing had been working well but the plants were getting smaller towards the last runs . I gave it some thought and Rh % came to mind. With the perpetual runs not having a higher rh in their veg periods due to other plants needing a lower Rh% in flower , the vapour pressure deficit (vpd) was not within veg periods healthier range. This current run has exploded and filled my normal space very quickly which in turn means I cannot use the same principle as the last perpetual run of bringing the next ones along ready for the exchanges. The XS1500 takes care of this issue with it being perfect for an initial nursery light that is easily covering all the new seedlings but is also able to cover my experimental "5 plant 1 Pot" attempt. I have placed 5 of my own autob seeds from a previous seeding in a single 60 L pot and intend to strip them to their 4th nodes and only allow 2 mains per plant to develop and flower. Inam hoping to have 10 mains growing in it that will be under the xs1500 solely as the other plants outgrow the lights footprint and space they are in. They will go into the main grow space once able so i can really see how well this new light can flower with the 10 mains to fill the space. Until that point , I will diary as we go and see what we can achieve.
Processing
Likes
15
Share
@dank604
Follow
Trucking right along with no issues. Girls putting on weight and it's pretty cool to see other bud-sites fatten up with this light compared to my old blurple. Day 50 for the 2-gal and day 43 for 3-gal, cannot wait until harvest!! Gonna wait minimum 80 days for the 2-gal, maybe longer.
Likes
20
Share
@Unkraut
Follow
Plants getting real sticky and buds are getting fatter Just 3 weeks to go... Will defoil them hard next week to lower RH in the final weeks
Likes
15
Share
@zelamax
Follow
La otra vez no puede terminar con el diario porque trabajaba,pero hora voy a hacer crecer esta bebe 🍀🌱con mucho cariño !!!! Tengo ganas de ver el color Rosa tiene que ser muy buena 🤤🤪🤪🤪😜🤩
Likes
4
Share
@KhaVigga
Follow
tried rapid 8 times nutrient tea and she act just fine
Likes
4
Share
Que pasa familia, vamos con la segunda semana de vida de estas Rainbow melon feminizadas de fastbuds. Vamos al lío , las 3 semillas que germinaron con éxito se colocaron en macetas de 0.6 litros y asomaron 3 , 100% ratio germinado. Necesitaré 2 ejemplares d esta variedad, en el trasplante quitaré la más pequeña. El ph se controla en 6.2 , la temperatura la tenemos entre 20/22 grados y la humedad ronda el 50%. El ciclo de crecimiento puse 18h de luz, el foco está al 75% de potencia. Hasta aquí todo, Buenos humos 💨💨💨
Likes
62
Share
Hi and welcome to a new grow :) Unfortunately I have to start over because of a malfunction I had with the automation of the heater. I basically cooked my plants. But now we‘re back with three new Ladys, wich I hope will turn out as beautiful as in the picture. I planted four, just in case one of them doen‘t make it. I will choose the 3 faster ones of course. The medium I use is mixed with soilles media (peat ,vermiculite) with additives. It‘s basically sythetic but it still has microbes. The nutriensolution is also mixed syntheticaly. I‘m not going to explain everything right now but at this stage i‘m feeding the plant low amounts of the Veg formular that was recomended in different studies. The EC is about 1350. PH of the Media and the Water is about 5.8. I also have a CO2 bag but unfortunately it was cooked by my heater 😬let‘s hope the funghi survived. Since oxigen is very important for the roots I am pumping Air throught the watercontainer. It helps keeping it clean as well. I do have Hidrogen Peroxide as well, but i‘m not sure if i should use it for the extra oxigen. If any of you have experience with it feel free to comment! I will keep you updated on the plantgroth over the week but for now everything is setup. Have a nice Weekend 🌱 Update: The first three girls are coming out pretty fast. InicuallyI though the 4th seedling didn‘t make it but she came out a day later. that was part of the planing so we’ll see. The first three are roughly the same age too wich is awesome. Right now i‘m giving them around 200 ppfd/24h. The Temperature and humidity are stable at 26°C and 90% humidity (as in picture) now it‘s lowered to 75% wich means the VPD is roughly 8,5. Let‘s hope I don‘t cook them this time 🙏 Oh and the CO2 bag is alive. Update: I‘m experimenting with VPD and I figured out, that the leaf experiences a different VPD due to cooling of the leaf while water is transpiring. So with LEDs the leaves don‘t warm up from the missing infra red but luckily my Light gets pretty warm so i put it up hight and brighten it to 40%. The seedlings stopped growing at a Lux of 8000 so i put them on 13000 with a leaf VPD of 0,6. I used a VPD calculater and have the following environment: 27,5°C and 60% Humidity. The leafs are ≈24 degrees (if i measured correctly) and the caculator spits out 0,6-0,8 wich would be ideal. Let‘s see how they grow since they are seedlings i‘m not sure if this stresses them. If you have any comment, please feel free to wright is down so i can adjust if necessary.
Likes
7
Share
@Zuppler
Follow
Week 6 - Transition to Flower (First Bloom Week) The Donutz squad has officially entered the bloom phase, kicking off the first week of flower in style. The upgrade to 7L pots has gone smoothly, and the plants are thriving in their new space. Monday marked the start of the flowering cycle, and everything is set up for an efficient and productive Sea of Green. Setup Adjustments: Canopy Leveling: The taller plants in the front row are left as-is, while the shorter ones in the back have been placed on top of the empty 3.7L pots. This ensures an even canopy for maximum light distribution. Defoliation: Everything under the net that wouldn’t develop into usable bud — based on past experience — has been trimmed away. The focus is now entirely on the top canopy and cola production. Nutrients & Care: Flowering Nutrients: Greenhouse Feeding Bloom is in play, with 30g applied per 7L pot (following the recommended 3-5g per liter). This should carry the plants through the stretch phase and provide a strong start for flower development. Watering: Still cruising with reverse osmosis (RO) water, keeping things clean and steady. Light Intensity: Slowly ramping up the light week by week to avoid shocking the plants, aiming for full intensity once they’ve settled into the flowering phase. Plans for the Stretch & Beyond: A second net is ready to go for after the stretch, ensuring the canopy remains supported and those fat nugs don’t collapse under their own weight. Continued monitoring of canopy height and plant health as they shift their energy into flowering. Observations: The Donutz are responding well to the flowering transition, with no visible stress. The even canopy and clean lollipop structure are setting the stage for optimal bud production. Everything is lining up perfectly for a strong flowering run. The Donutz are about to shine, and the tent is poised to deliver a heavy, uniform harvest. The Florida Gang energy is real — time to watch the nugs stack!