The Grow Awards 2026 🏆
Likes
8
Share
Que pasa familia, vamos con la tercera semana de floración de estás Zkittelz de Seeds Mafia. La humedad está entorno al 50%,y la temperatura la tengo entre los 22/24 grados. Controlamos en ph en cada riego a 6.2. Y el agua que utilizo de riego suele estar estancada entre 24 / 36 horas, hasta aquí todo bien, tienen un buen color, ya van progresando y creciendo a buen ritmo, vemos cómo avanzan estas semanas y como avanza el progreso de las flores. Mars hydro: Code discount: EL420 https://www.mars-hydro.com/ Agrobeta: https://www.agrobeta.com/agrobetatiendaonline/36-abonos-canamo Hasta aquí todo, Buenos humos 💨💨💨
Likes
69
Share
@wolfvb
Follow
Week 5 baby! What a smooth ride this has been - these ladies are absolutely flying through veg. Gave them some cooler water today and they're vibing with it 💚 Still keeping nutrients minimal, just 1-2x weekly when they ask for it. Less is more with these girls!
Likes
44
Share
With no doubt these plants have not produced much more quantity and density of buds due to the 2 serious mistakes I've made (those who have read the weeks will know what I mean). However, I can say that I am happy with the production obtained given the mistakes made. Between the 2 plants, the one that has produced more and generated the most dense buds has been the Gorilla with the Man-lining technique applied, it has also loosed a bit less weight drying than the non man-lining one. In comparison with the Money Makers with which they have grown the result is the same. Both Gorillas have each produced more than any of the Moneys comparing them 1 to 1. Also buds are a bit dense than the moneys, but none of them is really desde at all. *****ESPAÑOL***** Sin duda estas plantas no han producido mucha mas cantidad y densidad de cogollos debido a los 2 graves errores que he cometido (quien se haya leído las semanas sabrá a que me refiero). No obstante, puedo decir que estoy contento con la producción obtenida dados los errores cometidos. Entre las 2 plantas, la que más a producido y ha generado cogollos más densos ha sido la Gorilla con la técnica de Man-lining aplicada, y también ha perdido un poquito menos de peso en el secado que la otra. En comparación con las Money Maker junto a las que han crecido el resultado es el mismo. Las Gorillas han producido cada una más que cualquiera de las Moneys comparándolas 1 a 1. Así mismo, los cogollos de las Gorillas presentan un pelín más densidad que el de las Moneys, aunque realmente ninguna de las 4 plantas ha generado cogollos densos del todo.
Likes
10
Share
@CervantiS
Follow
Feb.9 Diy Growbox: 60*60*160 cm Light: 150w led Light Cycle: 12/12 Soil: CocoPerlite in diy Hydrobucket Extractor: 120mm PC vent Running 24/7 Dear Growdiary, Had to find out how to calibrate Ph meter, stupid manual didn't say how get next Ph setting. Found out on Youtube, Thanks to all tutorial uploaders 👍 Day62: Feeding 780ppm @ 6.14Ph 4L Drainwater 169ppm @ 6.50Ph Day65: Bucket seems to dry up fast Water 2L added
Likes
50
Share
Eternity Grow Cup - Week 9 Veg Update We are stepping into Week 9 of vegetation, and things are getting exciting! The plants are thriving—compact, bushy, and growing beautifully. This week, we introduced a SCROG (Screen of Green) net, an essential tool for maximizing yield and optimizing plant structure. Let’s dive deep into the why and how of scrogging: Why Install a SCROG Net Now? Maximizes Light Exposure: The net allows even light distribution across all branches, ensuring every bud site gets the optimal amount of light. Controls Plant Height: By guiding the branches through the net, we keep the canopy even and prevent excessive vertical growth. Enhances Airflow & Reduces Mold Risks: Spreading the plant out increases air circulation, reducing humidity pockets and minimizing risks of mold and pests. Increases Yield: More bud sites exposed to light mean higher-quality flowers and greater overall production. For now, we’re still not using the under-canopy lights, though they will come into play soon. The ICL 300 is positioned strategically, and we will likely move them around as needed later. For now, the focus is on structuring the plants and ensuring they fill out the available space properly. Optimizing Airflow - The Vortex Effect Air circulation is crucial for plant health, and this week, we’ve optimized airflow by positioning the fans to create a vortex effect: Fan Positioning: Each fan is placed at the tent corners, pointing in different directions, ensuring dynamic airflow instead of direct wind hitting the plants. Benefits of a Vortex System: Reduces hot spots and evenly distributes CO₂. Strengthens stems by creating a natural resistance. Prevents stagnant air, reducing mold and pest risks. The extraction system is powered by an AeroFan, connected to the AeroFan Smart Remote FRC1, currently running at 60% speed. This setup efficiently manages humidity and temperature while maintaining optimal air exchange. Current Environmental Conditions & Feeding For now, we’re maintaining the same water schedule and nutrient regimen. The environmental conditions remain stable: Temperature: Holding steady at ideal growth levels. Relative Humidity: Balanced to encourage healthy transpiration. PPFD (Photosynthetic Photon Flux Density): Kept at optimal levels to support vigorous vegetative growth. CO₂ Levels: Elevated but within safe limits, promoting faster growth. The plants are filling the space beautifully, but we know that the flip to flower is approaching soon! The next phase will depend on how fast they continue to spread, and adjustments will be made accordingly. Closing Thoughts & What’s Next? This week was all about structural optimization—ensuring proper airflow, training the plants with the SCROG net, and keeping everything in balance before the transition to flower. The upcoming weeks will be crucial, as we fine-tune the environment, possibly introduce the under-canopy lighting, and prepare for the flowering stage. A huge thank you to our sponsors Aptus Holland, TrolMaster, CannaKan, Grove Bags, Ziggi Papers, and of course, Zamnesia, Plagron, and Grow Diaries for making the Eternity Cup possible. And to our incredible community—followers, supporters, and even the critics—we appreciate every single one of you! Stay tuned for next week’s update, and don’t forget to follow along on YouTube and Instagram for exclusive content and behind-the-scenes looks! See you soon, and happy growing! Let’s keep pushing forward, and best of luck to all the competitors—we’re all growing something incredible together. Until next time! Genetics - Runtz https://www.zamnesia.com/6000-zamnesia-seeds-runtz-feminized.html Nutrients - Plagron https://plagron.com/en/hobby - Aptus Holland https://aptus-holland.com/ Controls - Trol Master https://www.trolmaster.eu/ LED - https://www.futureofgrow.com/en LED - https://www.thinkgrowled.com Soil - https://www.promixgardening.com/en Germination - Cannakan https://cannakan.com/?srsltid=AfmBOopXr-inLXajXu3QFgKXCXXos4F1oEvScjMKIB5MR5dk8-GJ-F49 DOGDOCTOR 15% off Smoking Papers - https://ziggioriginal.com/ Terpene saver - https://grovebags.com/ As always thank you all for stopping by, for the love and for it all , this journey of mine wold just not be the same without you guys, the love and support is very much appreciloved and i fell honored with you all in my life With true love comes happiness Always believe in your self and always do things expecting nothing and with an open heart , be a giver and the universe will give back to you in ways you could not even imagine so As always, this is shared for educational purposes, aiming to spread understanding and appreciation for this plant. The journey with nature is one of discovery, creativity, and respect. Let’s celebrate it responsibly and continue to learn and grow together! Growers Love To you All 💚 #EternityGrowCup #RuntzHunt #GrowersLove #CannabisCommunity #AptusHolland #ProMixSoil #TrolMaster #Zamnesia #Plagron #ZiggiPapers #Grovebags
Likes
3
Share
@Selkot
Follow
. FIRST DAYS ------------- The girls tolerated the topping well; in three days, I found small bushy bushes in my tent. So, a little mainlining to give them the desired shape, and a little splash of water with just Voodoo. Tomorrow they will receive their 4ml Grow A+B, with 2ml B-52 this time. PS: as you can see in the photo, a little mistake due to over-enthusiasm... I damaged one, but the branch didn't break completely; a little bandage, we'll see if it recovers, if not it will do without that branch. I've seen worse in a previous session, and it was my 3-branch plant that gave me the best harvest! 👉 https://www.youtube.com/watch?v=_QTXbEUN8pA MIDWEEK ----------- coming soon
Likes
43
Share
Bonjour a tous les padawans et les maîtres jedis Pour cette semaine 4 je surveille comme à mon habitude hygrométrie et arrosage. Je peaufine mon LST en stressant ma plante le moins possible. Je combine mon LST avec un pincage d'Apex cela me permettra d'avoir une canopé plus homogène donc une meilleure pénétration lumineuse et par conséquent un meilleur rendement. Petit rappel sur le pincage d'Apex: Le pinçage des plantes de cannabis Proche de la taille d’apex sur le principe, cette technique possède cependant plusieurs avantages, le principal étant de conserver le gros bud central de la plante, d’une production et qualité maximale. Pinçage des plantes de cannabis Le pinçage d’apex (tête de la plante) consiste simplement à pincer délicatement la tige du dernier étage de la plante, entre le pouce et l’index, jusqu’à sentir la fibre s’écraser sous les doigts avec un petit bruit critch caractéristique. Si l’espace disponible sur la tige du dernier étage ne permet pas d’y placer confortablement ses doigts, il faudra plutôt pincer l’étage du dessous. Le pinçage ralentira fortement la croissance verticale de la plante, tout en stimulant le développement des branches secondaires, donnant ainsi à la plante une forme de buisson. La plante mettra quelques jours à réparer ce pinçage, formant un nœud à cet endroit, et poursuivra ensuite sa croissance de façon normale. Le pinçage peut alors être répété si nécessaire, sur l’étage suivant nouvellement formé, ainsi que sur les éventuelles branches secondaires qui pourraient dépasser l’apex. Le pinçage est donc une excellente technique pour avoir une belle canopée uniforme de type marée verte. En pinçant régulièrement l’apex des plus grandes plantes de votre espace, durant la croissance et en début de floraison (stretch), vous obtiendrez ainsi facilement des plantes de hauteur homogène en pleine floraison, ce qui facilitera la culture et augmentera la production finale, surtout si vous cultivez simultanément de multiples variétés de marijuana. Avec un peu d’habitude le pinçage pourra être réalisé aussi rapidement qu’efficacement. En cas de pinçage trop violent qui se traduirait par un apex arraché, cela produira simplement les mêmes résultats qu’une taille classique de l’apex, ce qui ne sera donc pas dramatique. Que la force soit avec vous💪
Likes
54
Share
@Benzels
Follow
Back again for another update from down under. Well Its been a week of unusual weather here-actually most of Australia is having bizarre weather ATM with flooding rains mixed in with high 30's heat and damaging winds. This is in part why I now grow more smaller and better trained plants rather than a couple of larger tree's. One bad storm can literally snap a tree in half so unless your ladies are protected from the wind you WILL have issues outside. Train them, keep them low to the ground and stake them just to be safe ok. Mine are just greening up and bushing out nicely this week, not much more to report other than wondering how much longer before they show me those lil white hairs-cmon ladies its nearly feb and your not flowering yet? Any day now im sure. Hash plant is growing a 1-2cms a day easily, ZkittleZ is bulking up now while Caramelo just seems to be growing more and more shoots-Not used to sativias grown like this-do I cut some off to improve quality or leave em alone to improve quantity? I cant even count how many heads there are now. But the big news is my lemon haze variegated X sour Diesel hybrid seems to be staying female so far- no leaf color at all but the first 3rd gen hybrid that doesnt look like either parents but more of a middle ground of the two, its stayed female so far!! Normally only the ones that looked really sour D like stayed female but this one has a lighter leaf color than normal Sour Ds, but also more the leaf shape of the lemon haze side. Please stay female lil miss. See ya all next week.
Likes
7
Share
Hiiigh friends 🙌 Welcome to week 6. 😍 The earth is alive! A mushroom appears. A very good sign. I keep training so that the lady on the far right doesn't get any bigger... 😊 See you next week. 👋 Arturo for KannaKullektiv 🙏
Likes
24
Share
The girls have survived another week ❤️ I did a light defoliation and have been monitoring the RH closely. We have had a very damp week here, and the RH kept climbing and had my fan working hard. They are starting to plump up and fill in 😋. They have also started to slow their drinking habits, instead of watering every three days, it has moved to every 4 now. Just a couple of weeks left, I think I will be harvesting these over Christmas 🎄, and will have some great bud ready for the new year! 🎉🎊🍾
Likes
5
Share
Likes
3
Share
Día 36. Estamos en 6ta semana. Los esquejes se atrasaron debido a que han sido días muy fríos y no he logrado enraizarlos. Decidí poner el extractor de aire junto con la bomba de aire, así solamente se prende 15 minutos cada hora. Así estoy logrando temperaturas mayores a 24°C en el indoor y así voy a lograr el enraizado. La planta ya tiene un tamaño que ocupa casi todo el indoor. Pero lo importante es que la voy guiando y ya estoy proyectando como va a ir cada rama. El tamaño va a exceder lo que esperaba, pero aún así creo que si logro lo que tengo en mente, voy a sacar muy buenos resultados. Igual no me voy a arriesgar demasiado, así que si contando 10 días desde ahora, no logro que los esquejes enraicen, voy a pasar la madre a floración sola. Cómo pueden ver, las ramas están bastante gruesas, y el la ramificaciones van ganando su lugar cada una. Las raíces son demasiado grandes, aunque sé que voy a poder poner la planta en el sistema de arriba igual, aunque me voy a tener que ayudar de algo para meterlas. Es importante no utilizar las manos, ya que se pueden transmitir muchos hongos. Voy a seguir actualizando e ir viendo que pasa. Pero ya estamos en los últimos días de crecimiento, haya o no esquejes. Incluso puede que ya pase la planta al indoor de arriba para darle mayor libertad de crecimiento. Esto me va a servir para tlmar en cuenta en la próxima camada que se vendrá. La idea de esto es hacer las cosas rápido, y no en gran tamaño. Pero siendo que ya estoy en el baile, no me queda otra que bailar. Día 40 Los esquejes no estaban enraizando, así que decidí cambiarlos de lugar y los puse arriba de la luz, donde les da calor y luz tenue. Espero que ahora si agarren. Y hoy fue el gran día, pasé la planta madre al módulo de arriba. Pero lo voy a dejar una semana más creciendo. De esa forma veo si los esquejes llegan a agarrar a tiempo. Y además tuve un problema en el trasplante. Primero que la planta se hizo más grande que lo esperado, y la raíz también. Cuando la pasé, hubo contacto de la raiz con prácticamente todo lo que había cerca. Sumado a que se enredó en el oxigenador, así que quedó una pidra difusora en la raíz. Dado el alto riesgo de haberla contaminado con algún hongo, le puse una solución de agua con agua oxigenada, recirculando continuamente, para lavar las raices y de paso bajar el stress de teansplante. Mañana veremos cómo arranca el día. En el aprendizaje me llevo que en la madre, es mejor hacer un corte en el primer nudo, o dejar las ramas del segundo y quitar las del primero. Y así que queden sólo dos ramas, para luego dejar a los esquejes en el medio. Eso planeo hacer con la próxima variedad. Entre tanto ahora sólo me preocupa que la raíz no se haya contaminado en el traspaso. Ya en 8 días estaré pasando a floración si no hay esquejes. Si llegan a agarrar, habrá que dar unos días de crecimiento hasta que alcancen a la madre en altura. Pero ya está todo en definición. Ahora sólo queda esperar y seguir guiando a la planta. Ya tengo ganas de poner la próxima, pero falta bastante para eso. Tengo 10 semanas de flora, así que recién en 5 semanas voy a poner la nueva madre.
Likes
Comments
Share
A new version of the classic. The old classic strain now improved and in auto version! Just like the name suggests. Expect up to 500gr/m2 of super big buds. Ideal for beginners. Top-quality buds without much maintenance or extra effort. Indica-dominant hybrid. A relaxing high that comes hand-in-hand with a pleasant head buzz.
Likes
18
Share
@Kirsten
Follow
The plant is doing really well. We are progressing at a normal pace. There isn't much else to report this week. These weeks are always slow and pretty boring. I'm just keeping the medium sufficiently watered. Here is what I did this week. 12.9.25: I watered with 1.5L of dechlorinated water PH'd to 6.4 with; 💜 1ml Trace 💜 1ml Flourish PH: 6.4 PPM: 318 16.9.25: I watered with 1L of dechlorinated water PH'd to 6.5 with; 💜 1ml Trace 💜 1ml Flourish PH: 6.5 PPM: 308 The fungus gnats have really incresed since I did a watering of the whole tent. I have some more sticky traps set out, and I will not water for several days. Once it has dried the top soil, I will add some more Diatomaceous Earth to the top 5cm. Thank you for checking in this week and hanging out in the comments 😁💚✌️🌱🤞🧡
Likes
26
Share
@GrowGuy97
Follow
Harvested on day 66, overall very happy with how these ladies turned out & will definitely be growing them again! Wish all 3 could have put off buds like 1 of them did but the other 2 had some small issues & I feel like that’s why the didn’t produce as well! Will be updating soon with more pictures of dry weight & smoke report! Thank you to everyone for following & happy growing friends🙏🏼✌️🏼🌱
Likes
10
Share
🔥🔥🔥🔥 en attente de l'explosion florale. Leq branche commence a ce givré d'une couverture de trichome fantastique.
Likes
37
Share
@MG2009
Follow
08/21/2018 Day 1 week 2 of flower. Last bit of supercropping, keep the canopy low as possible 08/22/2018 #5 is the only 9 fingered leaves plant, all other GTH plants have 5 & 7 finger leaves, #5 took 3 clones she's my keeper of this batch. She is very diesely citrus,musky smell.can smell her at 90". #4 similar smell not as much stink. #3 minty chlorophyll smell. #2 orange,citrusy,mint. Ps. Gonna hit a selected branch or 2 of GTH #5 with mystery cookie males pollen I saved from earlier pollen harves. (week 19 mystery cookie grow) & some 2017 cherry pie pollen.( See Breeding Project, pollen test)@growdiary. #1 most similar to #2.rubs Smells from stem rubs on #1#2#3#4 , #5 no stem rubs needed she straight up stinks.👊🔥🚀⛽♨️
Likes
50
Share
@Rwein93
Follow
Ciao ragazzi e bentornati da me per una nuova pagina di questo diario!😉 Che dire ragazzi tutte le sorelle sono fantastiche.😍 La numero 1 è il capo famiglia, davvero imponente. La numero 2 ha staccato le altre di 5 cm, ora è lei la più alta con i suoi 155 cm. La numero 3 invece ha i buds già bellissimi. Nel complesso crescono bene e forti con una distanza intermodale marcata che le fanno respirare bene. Ora le fragoline misurano circa 1 cm di diametro e quelle della numero 3 misurano circa 1.5 cm💪 L odore inizia a marcare i suoi aromi, pungenti note di mapo (Citrus × tangelo) si mischiano a leggeri sentori di gasolio.😋 Ho defogliato loro nel giorno 67 e ho allargato tutti le apicale dalla pianta 1 con Lst, i nuts rimangono invariati.👍 Eh niente! Anche per questa settimana è tutto ragazzi. Grazie a tutti per aver guardato e restate sintonizzati per nuovi aggiornamenti.🙏 Buona settimana e felice crescita 🌱 🌱 🌱