Likes
Comments
Share
@RakonGrow
Follow
Harter ritt diese Dame , alles viel zu schwer das es gleich umknickte beim defolieren . Hab mal ein getrockneten Bud aus der mitte genommen und Trichom analyse (Videos und Bilder) gemacht . ja viel klar wenig milchig und einige rot . Ergo , zuviel Licht an der Spitze (abstand zum licht viel zu gering) und im Boden zu kalt ist keine gute Kombination . dry + trimm after 4 Days result in 120g Cannabis F1 Wurlz price 1.08€ / 1g , Total Tent : 200W on 1m² with total 280g = 1.4g/W
Likes
25
Share
@NONSENSE
Follow
Hi all! Today I continue to record my DARK Phoenix lady vegetation stage. This week the plant has grown a little. I continue to stretch the branches to the sides, thereby freeing up space for air circulation and light penetration. There are enough fertilizers from the Green House Seeds and the plant looks healthy and strong. I added some root food from GHE and also the Urtica from GHE. I continue to water every day, since it is COCONUT and it should always be wet - then there will be no salting. And I keep the PH in the range between 6.3-6.5. I Added slightly more fertilizer to water this week, so the PPM is about 650-700.
Likes
Comments
Share
Likes
92
Share
Harvest Notes ✂️ • Harvest Timing: Papaya Zoap was harvested at day 63, with select buds taken earlier at day 56 due to mold concerns. • Drying: After careful trimming, the buds were dried for 12 days. The quality and aroma during drying hinted at the stellar smoke to come. • Density & Yield: Buds were rock-solid, delivering an excellent yield with perfect density for storage and enjoyment. Terpene Profile & Aromas 🍋 • Primary Aromas: A tropical explosion with sweet papaya upfront, complemented by creamy, soapy undertones that make her truly unique. • Complexity: As the buds cure, a hint of citrus zest and exotic fruit emerges, creating a full-bodied terpene profile that’s simply irresistible. Cultivation Experience 💡 • Highlights: Her uniform growth, heavy trichome production, and response to super cropping made her a delight to grow. She thrived under careful spectrum adjustments and defoliation, showcasing her adaptability and vigor. • Challenges: The dense bud structure made her more prone to mold, especially in a high-humidity environment. However, proactive monitoring and swift action mitigated the spread. Verdict: 🌟🌟🌟🌟🌟🌟🌟🌟🌟🌟 (9.8/10) Papaya Zoap is a strain that commands attention with her beauty, aroma, and unstoppable growth. While her susceptibility to mold required extra care, her overall performance, yield, and quality were nothing short of exceptional. A grower’s dream and a frosty masterpiece! Stay tuned for their individual harvest reports, smoke reviews, and more as we wrap up this epic series! Discount Codes so you can save big on your next check out 💚💚💚 Kannabia - DOGDOCTOR 30% off SeedsmanSeeds - DOGDOCTOR 10% off CannaKan- DOGDOCTOR 15% off terpyz.eu - DOCTOR 15% off The Neutralizer - PORKIT5-DOG 15% off Fast Buds - DOGDOCT 15% off As always thank you all for stopping by, for the love and for it all , this journey of mine wold just not be the same without you guys, the love and support is very much appreciated and i fell honored and so joyful with you all in my life 🙏
 With true love comes happiness 💚🙏 Always believe in your self and always do things expecting nothing and with an open heart , be a giver and the universe will give back to you in ways you could not even imagine so 💚 Friendly reminder all you see here is pure research and for educational purposes only Growers Love to you all 💚💚💚
Likes
13
Share
On 4th week. Using now Athena Pro Line. Easy to use and get it done faster. Let see how the girls react to it. They smelling skunk sweet and Apple Fritter. One pheno showing purple . Thinking it come from Forbidden Fruit and the smell Apple Fritter
Likes
7
Share
The ladies are looking good 3 had a rough start but it was either ph or nitro deficiency somehow...im using nftg#4 for base soil and building a living soil...I topdressed 1/4 cup craft blend and 2 tbls Bokashi...
Likes
410
Share
It's been 42 days of flower now and The gals are still loving the fc4800 and their new 8x8 mars hydro grow tent as much as I do👍 leaves are sticking straight up towards the light. Love how easy the zippers are to open and close. Nice and strong and guaranteed to last. It has extra material on the backside of the zipper that helps for light leaksand enough ports and vents for anything you need in it👍. the tsw2000 is still going strong and is also a very good light. Its been going almost nonstop for 6 months and still working the same as when I got it👍. not much heat off both lights but the fc4800 is alot cooler and the heat-sinks work extremely well. I have it daisy chained to the tsw2000 and 1 dimmer controls the other and i don't need to be reaching in too far to dim the other light, it's awesome and I can't wait to buy more lights to daisy 4 together👍. I would recommend this light to everyone that grows with leds and have trouble with temperatures getting too high. Even if you grow with HPS lights I think any mars hydro light is a MUST TRY. I like how heavy both lights are because I know it means they are built soild and strong 💪. Very good sign with the frost they are starting to get thanks to bith mars hydro lights. I can notice more frost under the fc4800 and I'm thinking it's from the UV DIODES they put on the fc4800 👍. 2 days ago they all smelt like my nuken, sweet marshmallows. But now I can smell the monkey dough and gorilla glue and skunk monkey coming through👍. I touched a bud on the gorilla and monkey fingers smelt like fruit loops👍 really pleasant smell. Lingered on my fingers for atleast 30 min. I'm glad mars hydro is under priced compared to some brands and for how popular they are. usually companies would charge more. Thanks mars you guys are awesome 🤘🥁🎸. I'm getting a new exhaust fan soon. An 8 inch that will work alot better than my 4 inch lol. Wayyy to small for a 8x8 Grow Tent. Dehumidifier is going almost non stop to try and get the humidity down. I love how both lights on 100% power only raise my temperature 2 or 3 degrees 👍. You can rest your hand on the lights and not much heat comes off them. Obviously there is some heat but for the brightness of the lights and only raising the temp that much is awesome 👌.  And if I wanted to I could remove the driver from the fc4800 and run it on the outside of my tent because the cord is so long but 2 or 3 degrees is barely nothing👍. The girls are starting to bulk up abit now and only 3 weeks of flowering, these lights are awesome 👌.  My last run of monkey dough and gorilla glue didn't start showing alot of crystals until week 4. These were only 2.5 weeks and I started noticing some frost. Next week I will be able to tell more about what these custom bred seeds will be like. I love how the smell is changing now. Didn't want all them to smell like nuken marshmallows lol. It's awesome that I can get right inside the tent to do any work i need👍. Even if I wanted an 4x8 tent. I'd rather this 8x8 because it's so easy to work with the plants and have so much room to move around and massive headroom when I'm in there chillin with the gals🤣🤘. FOR EVERYTHING MARS HYDRO VISIT: Www.mars-hydro.com PROMO CODE: rocknroll Instagram: @marshydropenny https://youtube.com/channel/UChU5ZWwNi-DvnO3oWVU3ceA Thanks for taking the time to read and check out my shit🤜🤛 GET THE MAX FROM MARS👍: Welcome one of  the newest members of the Mars Hydro family🤜🤛🤘. The Mars Hydro FC 4800 480W LED Grow Light can accommodate up to a 4' x 4' area for flowering. It has OVER 2000 LED chips consisting of the best selling Samsung LM301B diodes which has a Luminous Efficacy of: 220 lm/W 0.2 W, 3 V mid power, Osram 660nm Diodes, Infrared light and UV LIGHT👍. It boasts the incredible efficiency of 2.8 µmol/J, maximum 2.5gram yield per watt with 30% higher Average PPFD. This High-intensity spectrum is beneficial for plants at all stages - from veg to bloom, and creates Big dense Buds👍. achieve 50% higher yields & quality compared with the old lights! Only consumes 480W for 4x4ft personal grows, and 3x3ft for commerical grow. It comes with a dimmer and daisy chain function with a  maximum of up to 15 lights, the master light controls the rest👍. Wide 6-bar design offers even & wide canopy coverage and can maximizes your grow space. slim 180° FOLDABLE DESIGN... YES I SAID FOLDABLE🤘🤣 , making it compact and easy to install, it's IP65 WATERPROOF and will give you no worries while growing in a humid environment and makes it a flexible high performance commercial grow light for enormous  SUPER FROSTY yields.😛😛😛. MARS GETS EM FROSTY BOYS👍 AWESOME HEAT DISSIPATION: The Low energy consumption FC4800 growing light has 6 passive-cooled bars and an aluminum heat-sink a removable driver  you can upgrade later or have it outside your tent. with zero noise  you can save up to 50% in your electricity bill compared to HID's or HPS lights! It also has a removable driver so you can upgrade it in the future or have it outside your grow space for better heat control in your growroom👍 UPGRADED FULL SPECTRUM: Yield Max Spectrum with enhanced red (Top-Bin Samsung 3000k-5000knm, Osram 660nm Deep Red), speed up blooming & fruiting, perfectly suited for full-cycle growing. The FC4800 LED grow lamp was born for Big Buds, perfect for commercial, grow tent, grow room, hydroponics, and all soil grows.👍 THE BEST SAMSUNG DIODES: THE FC4800 has Top Bin genuine Samsung Osram Diodes, combined with remarkable 2.8 µmol/J Efficacy, 30% higher Average PPFD, 50% less energy consumption, to maximize your yields. They give you a TRUSTED 3 years warranty 100% Satisfactory guaranteed!!! The MARS HYDRO 8x8 Grow Tent interior is made of a unique diamond design mylar which is highly reflective. (Other companies mylar and reflective rate is as low as 50%, and it won't provide efficient light. They use thick 1680D oxford canvas, and being double stitched, it is tear proof and perfect for locking in the light. Their grow tent keeps 100% of the light inside the tent and helps your plants absorb more light. EXTRA-THICK material means No light leaks or rips at all.👍 Strong Stable metal corner adapters and poles are the trustful supporters of the tent. It's very sturdy, neither rusting or paint flaking off. quick and easy tool-free setup. They use heavy-duty metal zippers, with double layer black lining, by far the best on the market which creates a light-proof seal. The Easy observation windows are made by double layers of cloth. Observe the growing conditions of your plants without opening the tent and avoid disturbing your plants. The observation windows also serves to dissipate heat and ventilate the air. The tent includes 2 removable waterproof floor trays to hold soil and water. The removable tray can be taken out to wash easily. They guarantee the grow tents are easy to install even if you've never done something like this before. Clear Instructions and no tools needed! They also offer 30-day unconditional refunds for quality problems. Just contact their friendly 24 hours customer service 👍   https://greenbuzzliquids.com/en/shop/ PROMO CODE: rocknroll https://www.youtube.com/watch?v=8hEqyS1jPpI https://growdiaries.com/diaries/112437-grow-journal-by-rock-n-roll-randy/week/593118 https://greenbuzzliquids.com/ #greenbuzzliquids @GreenBuzzLiquids We switched from advanced nutrients to GREEN BUZZ LIQUIDS 👍
Likes
4
Share
Es war Zeit für die Ernte, im Urlaub hatte sich an der Pflanze im Folientunnel Schimmel an der Hauptcola gebildet und auch etwas an der Pflanze auf der Terrasse. Es hatte in dieser Woche sehr viel geregnet. die Pflanze wurde geschnitten und zum Trocknen aufgehängt.
Likes
51
Share
Might get rid of GSC and just make more room for Trainwreck and G13 to spread. Going to do heavy defoliation for the first time tomorrow stripping everything underneath 2nd scrog and in between bud sites. Nervous it's going to really shock the plants but hopefully a handwatered feeding tomorrow helps keep it on track. Week Three of Flower... Baby Jesus, please give me the energy to continue watering twice a day for the next six weeks 🙏 Day 60 Update: Still some trimming to go but finally pulled the cord on GSC. Wish I had a while ago so the other plants could stretch more proper. Placed a riser under the Banana to even out the height. Going to tie down any tall sites and see if I can trigger a nice long cola down the scrog. G13 already has one forming nicely. If it withstands all that trimming with little to no shock, I will be impressed for sure.
Likes
43
Share
@valiotoro
Follow
Hello everyone 😎 Week 2 for my girl She is doing very well,growing at fast pace and with a beautiful green colour on the leaves. Have a nice day 😎
Likes
3
Share
@Menzee420
Follow
Monday: Leaf yellowing has continued this past week. Rather than continue to increase the amount of general nutrients I've been using I think I'll just start adding some extra Nitrogen, starting this evening. Otherwise she looks great! Very lush, soft green leaves (aside from the few yellow ones). She smells amazing in a few places where the trichomes are starting to form. ************************************************ Tuesday: No new yellow leaves this morning! The ones that were a lighter shade of green/turning yellow didn't get any worse. Seems the tiny amount of Nitrogen I gave her last night had an immediate and positive effect! Will continue adding the Nitrogen - I imagine as she continues to build buds she's gonna need more and more. ************************************************ Thursday: Still looking lovely. Very small bit of yellowing on a few leaves. Deffo not worried about it anymore.
Likes
110
Share
!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!guckt euch letzen Report an !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!! Blüte hat begonnen: Edit:11.05 Die Pflanzen sind innerhalb von 2 Tagen explodiert. Ich habe das Licht nun auf 75 Prozent gestellt und noch einmal Cal-Mag nachgegeben, da die letzte Gabe nur eine halbe war. Die beiden Titan sehen fast identisch aus. Die beiden Epsilon sind circa 3 Tage unterschiedlich, eine ist etwa 5 cm kleiner als die andere und hat noch kaum Blüten. Ich denke, in 3 Tagen wird das der Fall sein. Die Cosmos F1 ist im Umfang circa 50-50 cm, kaum Blüten bisher. Ich hoffe, sie wird nicht noch viel größer, da der Platz langsam eng wird. Ich bin von dem Wachstum dieser Pflanze absolut begeistert. Mal gucken, was die Blüte bringt. Edit ende Ich habe alle Blüten entfernt, die nicht im direkten Licht sind, und alle Blätter, die die Blüten bedecken. Die Pflanzen weisen einen Cal-Mag-Mangel auf, was bei der Blüte normal ist, gerade bei diesem Licht. Ich habe dem Gießwasser etwas Cal-Mag hinzugefügt. Die Pflanzen sind drei Tage älter als im letzten Report. letzte Woche : Die Pflanzen sind seit der Keimung auf diesen Fotos genau 30 Tage alt. Ich habe eine Pflanze ausgetauscht, da es sich um eine Epsilon F1 handelte, die vermutlich Mutationen aufwies. Sie hatte verkümmerte Blätter, die nicht wie die ihrer Artgenossen aussahen, und wuchs deutlich langsamer. Daher habe ich sie nach 2,5 Wochen ausgetauscht. Der kleine Mann(die ausgetauschte Pflanze) leidet natürlich jetzt ein bisschen unter Lichtstress, deswegen werde ich wohl nur eine sehr gestauchte Pflanze erhalten. Aber besser, als die Fläche leer zu lassen. So viel zu dem, was nicht funktioniert hat: Die Sanlight stand die ersten 2 Wochen auf 20 Prozent. Dann habe ich sie teilweise mit dem Dimmer höher gestellt: 2 Stunden auf 25 Prozent. Eine Woche später bin ich auf 30 Prozent und 2 Stunden mit 35 Prozent gegangen. Für Woche 4 habe ich 40 Prozent und 2 Stunden auf 45 Prozent gewählt. Ich erhoffe mir, die Pflanzen so schneller an die starken Lampen zu gewöhnen. Im Nächsten grow soll bei jeder Pflanze die TDS per Infrarot gemessen werden. Da werde ich dann ein Experiment zu machen, wie die Lichtsteigerung am besten umzusetzen ist. Zu den Lampen kann ich bis jetzt nur Positives sagen. Im Gegensatz zur dazugehörigen App, diese ist wirklich nicht sehr gut umgesetzt. Das Menü und die Einstellungen sind teilweise irreführend und nicht sehr durchdacht. Ich muss mir immer wieder die Tutorials in der App ansehen, da diese immer wieder angezeigt werden. Noch dazu hätte ich gerne die Möglichkeit, mehr Einstellungen treffen zu können. Das ist aber Meckern auf hohem Niveau, weil auch die App das macht, was sie soll, nur eben meiner Meinung nach nicht sehr gut umgesetzt. Die Pflanzen wurden von mir mit Klipsen aus dem 3D-Drucker gestützt. Diese Klips kann man Stück für Stück im Winkel verstellen, so dass man die Triebe damit neigen kann. Das habe ich von Tag zu Tag im Winkel verstellt, so dass ich am Ende einen 45-Grad-Winkel habe. Das habe ich insgesamt über 6 Tage gemacht. Die Pflanzen haben an sich ein sehr gleichmäßiges Wachstum. Die Cosmos F1 wächst so optimal, dass kein LST mit den Klipsen nötig ist. Ich habe an den Pflanzen keine Mängel entdecken können und auch keine Anzeichen von Mutationen. Die Pflanzen haben im Durchschnitt eine Höhe von 35 cm, wobei eine etwas stärker abweicht mit 22 cm (wieder eine Epsilon F1). Der Umfang mit LST bei der Cosmos F1 liegt ohne LST bei 20 cm im Durchschnitt, wo wir wieder die Epsilon im Negativen haben mit 14 cm. Die Pflanzen wurden alle entlaubt, das eine Woche vor der Blüte. Morgen werden die Pflanzen erneut entlaubt und ge-lollipoppt. !!!!!!!!!!!!!!!zusätliche infos werden morgen ergänzt + Fotos !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!! *1. Foto Mutation: Dieses Foto wurde nur 5 Minuten nach dem Umtopfen der Pflanze aufgenommen. Vorher stand sie in einem größeren Topf, in dem sie genauso aussah. Ich habe sie umgetopft, weil ich den Topf brauchte, aber die Pflanze nicht wegwerfen wollte. Der Pflanze geht es gut, aber sie sieht im Moment etwas mitgenommen aus. Bilder folgen
Likes
3
Share
Pipe Light Kent harvested. Wet weight: 1125g
Likes
8
Share
14-05-2021 (DAY 59) Se realizó el cambio de solución. Las plantas vienen espléndidas y con el Safe roots de Hydrotek ya no tuve mas problemas de raíces. Está entrando la flora mas potente y formándose los Buds.
Likes
7
Share
Removed the 1st nodes to divert energy into growth and future air flow also LTS 2nd & 3rd nodes
Likes
9
Share
@Xabii
Follow
Starting this week there will be a Mars Hydro VG40 at the bottom to boost the lower buds, they will not be as dense but will be good for some hash that's why I leave them be. The ORP probe is not calibrated and values are to be taken with a grain of salt. Values are average of the day. DATE - °C - RH% (Tent Temp/RH) 20240808 23.8 60.9 20240809 24.2 67.2 20240810 23.4 67.0 20240811 24.1 66.9 20240812 25.3 69.2 20240813 27.1 71.9 20240814 25.0 76.1 DATE - PH 20240808 5.91 20240809 5.79 20240810 5.77 20240811 5.73 20240812 5.79 20240813 6.09 20240814 5.68 DATE - ORP (mV) 20240808 250 20240809 175 20240810 107 20240811 118 20240812 88 20240813 85 20240814 84 DATE - EC(us/cm) 20240808 2240 20240809 2265 20240810 2162 20240811 2202 20240812 2187 20240813 2119 20240814 2141 DATE - CF 20240808 22.40 20240809 22.65 20240810 21.62 20240811 22.02 20240812 21.87 20240813 21.19 20240814 21.41 DATE - °C (Reservoir) 20240808 21.6 20240809 22.6 20240810 21.5 20240811 21.9 20240812 22.3 20240813 23.8 20240814 22.1
Likes
11
Share
@Grizzly
Follow
The smell when wet trimming the fans off is of sweet berrys, a little bit citrus and musky dank smell is the only way I can describe it. The drying is coming to an end, at the end of day 13 I broke a bud off that weighed a gram and had a smoke test, the flavours are there and it smooth smoke surprisingly but I think a cure will really bring the terps out.
Processing
Likes
17
Share
@Hoodoo
Follow
2020-08-11 Another week gone by... Plant 01 is still fattening up, drinking normally. Plant 02 has been completely choked out of the lights so it's not doing very well. Keeping the nutrients the same as they are both pretty steadily drinking. Some death amongst the lower leaves on plant 02 and the buds are getting trichomes but not getting very fat. Plant 01 is very dense and sticky af. Excited to harvest in a couple weeks! The tent is definitely ugly as hell and the vegetative state clearly went on for about 2 weeks too long (first time grower) while I messed up the nutrients and other things that caused them to grow slowly. The 2nd plant never really recovered. I have continued defoliating and super-cropping plant 01 away from the light and keeping the distances even... It's an ugly canopy, can't wait for the next one so I can get it right!!
Likes
2
Share