Skywalker rounding the corner. Harvested 8/7 @ Day 76 from sprout Blueberry bulking up. Glueberry og done stretching and bulking up now

La 3 semana de crecimiento las niñas están en su máxima potencia comprobamos que no tienen falta fe ningún nutriente están super verdes con unas hojas muy grandes

FOR EVERYTHING MARS HYDRO VISIT: www.mars-hydro.com www.marshydroled.ca PROMO CODE: rocknroll VISIT THE ALIEXPRESS STORE: @marshydro_aliexpress Instagram: @marshydropenny Thanks for taking the time to read and check out my diary🤜🤛 TS3000 FEATURES: WIDEBAND SUNLIGHT FULL SPECTRUM LED GROW, Infinite close to natural sun light, suit for all plants whole stages indoor growing, rapid plant response from seed to flower, achieve maximum quality and quantity, much better than traditional HPS grow systems. HIGH REFLECTIVE & NOISE FREE-Fanless LIGHT BOARDS design will make your growing life easy and quiet, quickly heat dispersing material aluminum reducing light lost to aisles and walls, increase the light intensity up to 20%, allowing your plants receive more energy and without burning your plants for maximum headroom. HIGH EFFICIENCY ENERGY SAVING PLANT LIGHT, high-power NEW LED grow, Compares to traditional 3000 watt HPS lamp and other brand led grow light while only 450 watts true output with 1016 LEDs, more scientifically and energy-efficient! Perfect for 5' x 5' veg stage, 4' x 4' bloom stage, higher intensity in a MARS HYDRO grow tent, reflective area, or by crossing over using multiple TS3000. BOOM YIELD LARGE GROW LIGHT, NEWEST SMD LED technology provide highest PAR/LUMEN output(1095.6umol/), makes you get 30% higher yield compare OLD led lights, can get max yield at 2.5g/watt, less pay but get more yield, bring a amazing grow trip to any home grower as it beams huge amounts of light energy to plants below. COMMERCIAL LED GROW LIGHT, Updated easy dimming & daisy chain function, main light controlled, especially come with two waterproof and dimmable Mean Well Drivers, auto sensing power supply works on both 120VAC and 240VAC and 277VAC, suit for Large Rooms and Commercial Setups. Low Energy-Consuming LED Grow Light: Consuming 300w and also mounted with 1016 chips, TS3000 has the ability to replace a 450w HPS light while reducing 40% power intake. High Efficiency LED Grow Light: With overall light output PPF 343umol/S as well as amazing PPE 2.3 umol/j, it's 50% even more photon efficient and can assure a 30% more return than the old HPS/MH lights. Patent Highly-Reflective Hood Shape: The reflector design on TS3000 is patented, which can effectively gather the light dispersed in all directions to enhance its light intensity as well as assist plants in absorbing more light. Full Spectrum Plants Favorite Spectra: By the unique mix of spectra that makes most light in the 400-700nm waveband, incredibly conducive to plant photosynthesis. Adequate IR(730-740nm) is additionally consisted of in the range to generate larger buds. Dimming And Daisy Chain Feature Available: Upon an independent dimming button on the external driver, backing 0-100% settings adaptation and up to 30 LEDs daisy-chained in a group, it supplies different light levels for various plant stages meanwhile saving energy. Safety Certifications And Service Warranty: CE, ETL, RoHS, UKCA security certifications accepted, 50,000 hours durability, 5-year service warranty, and local after-sales repair 5x5 GROW TENT: LOCK ALL LIGHT INSIDE MARS HYDRO Indoor Grow Tent interior is made of diamond mylar which is highly reflective. (Other brand's mylar and reflective rate is as low as 50%, won't provide efficient light. )MARS HYDRO 1680D canvas, being double stitched, it is tear proof and has perfect light locking. Mars Hydro's grow tent keeps 100% lighting beams inside and helps your plant absorb more lights. EXTRA-THICK --No light leaks or rips at all DURABILITY GROW TENT Stable metal corner adapters and poles are the trustful supporters of the tent, standing sturdy, neither rusting nor paint-falling, quick easy tool-free installation. Mars Hydro's heavy-duty metal zippers, with double layer black lining, are the best on the market which create a light-proof seal EASY OBSERVATION FOR YOUR PLANTS. Special observation windows are made by double layers of cloth. Observe the growing conditions of your plants without opening the tent and avoid disturbing plants. The observation window also serves to dissipate heat and ventilate air AUTOMATIC 6 INCH EXHAUST FAN KIT W/ CONTROLLER: Mars Hydro 6'' Inline Fan uses a mixed-flow design to maintain peak performance in a high static pressure environment. GROW TENT FAN: MARS HYDRO inline fans are designed to ventilate hydroponic grow rooms, transfer heating/cooling, cool AV closets, and exhaust odors. EFFECTIVE VENTILATION: Variable speed controller for easy fan speed adjustment. Optimal ventilation for your planting. LOW NOISE LEVEL: Durable plastic fan housing and blades for extremely low noise(32dB-A); create a truly quiet growth environment. EASY INSTALLATION: Removable duct ends with locking tabs for quick removal and easy maintenance and a cord length of 4.9 feet for hassle-free setup. This grows tent fan with a controller for easy fan speed adjustment. BASIC PARAMETERS: Ventilation exhaust fan size: 6” | Dimensions: 315mm*225mm*210mm. | Weight: 2.7. | Airflow: 402CFM | Noise: 32dB-A | Bearings: Dual Ball. 

ordered 10 gallon pots for the 2 blue dream and pineapple express they are going into a different tent. Plan on replanting Friday. Autos all are doing fine, think I've been having issues with cal mag hopefully I can get it sorted out. All the plants are pretty big at this point except the gelato #33 its so small lol. Very crowed in a 4x4 and the plants need more room maybe moving the photos out will help the autos out and let them spread out more. Ordered some Recharge, excited to try out. I heard about it on dude grows lol great podcast 👏 Picked up some blue planet liquid seaweed and also their gold shield silica, also excited to try. Lastly got some Dynomyco to add in. Both blue dream and pineapple express are in their new home another 4x4 tent. Only running 1 halide at 400 watts and a small mars led. Will boost the light up significantly during flower with 1200 actual watts and change out to super lumen hps. Running a terrabloom carbon scrubber out of the second hid hood all powered by a 6 inch AC Infinity cloudline venting outdoors. Also using another 6 inch to bring in fresh air and have a portable ac to keep it nice and cool I think its important to mention after every grow I like to go in and clean out my tent. Vacuum up leaves/dirt, Wipe down all surfaces of the tent(I use paper towels and water in a spray bottle) and also clean off my lights. Wipe them down make sure the glass is cleaned(It makes a big difference). I grow strictly for my own personal consumption and I want the cleanest product.

This was probably when I started to realize I should have done a lot more training. I didn't and we are where we are, but the plants look healthy as all get out. For my second grow and my first photoperiods, I couldn't be happier. Somewhere soon I axe the third plant, it was that or dedicate my entire 2x4 to it.

Discoloration is in direct relation to some of the roots being green while the redt are white. This is bush doctor coco loco

Hey now, hope everyone is having a great weekend and staying safe. Another great week for the ladies, as they are now almost halfway through flowering which is 4 weeks into flower, and the stretch has just finished. I am still feeding them silica, cal mag, and flower nutrients maxi bloom by GHE. I did start to add a PK booster last week pushing the EC up to 1.4. I also switched the Medic Grow light from V1 to the F1 Spectrum at the beginning of last week, and will be integrating the UV/IR bar into the light cycle later this week. I will run the UV/IR bar for approximately 30 minutes prior to lights off to get started. The tallest plants are the Sundae Driver and the Durban Nights at 44" and the Red Hot Cookies is the shortest plant at 40" however they all look happy and healthy and capable of easily giving up a half pound each. The 5X5 tent is starting to really fill up and they are just now starting to smell. I was out of town all weekend so I was unable to make a time lapse video but I will update next week. I did defoliate twice this week and I may do one or two more rounds before just letting them do their thing. Not much to do from here on out except make sure the reservoir is full and the PH is in the proper range. I hope everyone has a great weekend, Thanks for stopping by, Stay Safe and Blaze On!!! 💪 Website: https://medicgrow.com/ https://growdiaries.com/grower/medicgrowled

They look great during the Recovery of the Defoliation. Overall it work good. In the down Part of the Branches they let some Leaves fallen by themselves. They focus on the Flower Production Started the Week with 1.5l daily amount of Water Gave them at Sunday 10ml of PK5/8 again. And once 2 tsp Bactrex in 4.5 L Water They dry out over the Weekend, so get up two Litre and Calmag up to 1ml/l All 3 are like Glue on whole Plant, when you come with your Arms at the Plants 🤓

Cuarta semana de vegetación y he notado varios cambios en Kukulkán de la izquierda la veo con las hojas algo caídas a comparación a la de la derecha, que siempre está vigorosa siendo que riego con la misma agua y los mismos cuidados. Hoy toco riego sin alimento, pero con calmag para subir el ec del agua purificada y subir la cantidad de calcio, magnesio y otros nutrientes al agua , veremos qué tal funciona. A una semana aprox. de pasar a floración compré la línea orgánica de wonderland y me gustaría empezar a usarlos en floración, mi pregunta es si la planta tolera el cambio de alimento si alguien sabe, puede dejar su comentario 🙏🏽

Well I missed a week was going to shut down this grow as the plants were not doing anything all the deformed leaves were making it so the plant was using all its energy on fixing the deformed leaves so slowly I pulled off all the deformed leaves witch took me 2 weeks and there is still a few left now . Finally they seem to be growing again after almost 3 weeks of being stunted. Had plans of flowering them next week but there way 2 small so I will have wait probably 3 extra weeks . This grow is a good grow to show people what not to do. Will do an overview of the whole grow at the end of flower saying what I would do differently next time so these problems don't happen again . Oh yah and when I flushed the plants I did not flush them good enough and they were still being over feed for for 2 weeks .

Week 3 flowering

I used to grow gorilla cookies before, but then they broke it, and now it's back to the old gorilla cookies, which is excellent in every way 💪👌🤤

AK 2.0 XL Autoflower has some big saggy buds on her. She grew great through the grow. Minor issues with ph here, and there. I have tried growing with low tds, and high tds in DWC. I prefer High TDS to help control ph level better. Plus plant gets much bigger. From my experiments. This plant is a fine example. Heavy yield, and full of frost. Strong aroma of citrus and a earthy fruity smell. She grew really well under the Mars Hydro FC4800. I will upload a harvest video if it let's me. If not it can be found on my YouTube channel. Link will be below. Thank you Mars Hydro, and Ganja Farmer. 🤜🤛🌱🌱🌱 Thank you grow diaries community for the 👇likes👇, follows, comments, and subscriptions on my YouTube channel👇. ❄️🌱🍻 Happy Growing 🌱🌱🌱 https://youtube.com/channel/UCAhN7yRzWLpcaRHhMIQ7X4g

Ive had to veg a little longer than i like but the girls are doing great so it is wot it is

Loving it

I harvest at day 75 from seed after approx two weeks of flushing. These buds are very sugary, hard and the smell of candy I. Wish you could just smel them. Plant grew normal, no troubles with her. A great strain with a great smell . Unfortunately I lost the pictures from the missing weeks 😪😪😪 taste 9/10 high 9/10 growth 10/10 density 9/10 yield 9/10 I recommend this strain to most people as theres nothing to not like about it. I will definitely grow again. Would happily share a few buds with you all.😁 thumbs up for FastBuds team, for another cool and awesome strain ✌️👌

08/16/2020 This is my first clone from Red Sky, the mom of all these clones in the tent, (video #1). All others are at different stages of flowering, she is beginning week number 3 of flowering.

No casualties first time germinating! Very excited to watch this growth