so week 11.. The gorillaz are carrying on beautifully, however I realised having 5 plants sharing one reservoir is now quite a bad idea.. 2/5 of them look to be well into flower, fattening up and some tri's starting to turn cloudy but look like theres still plenty of fattening up to do. The other 3 are now just beginning to fully pistil up so will still be requiring flowering nutes when I should be beginning a flush on the other 2.. any comment or advice on this would be greatly appreciated!? The Stardawgs have basically grown into tennis balls. Such a vast majority of bud sites all the way down look so much larger than I could ever have hoped and i've had to tie some of the buds to the main colas!! I will Be starting the flush this week as most Tri's are now cloudy i'd say around 4/5 currently but more throrugh macros will be taken as the days progress. The only problem i've had is some of the sugar leaves on 2 of the plants have really taken a beating and show some strange signs. I think the LED's aren't to be under estimated and i've battled some burning and what seems to be calmag issues through the grow.

Starting of from an sexy seed - root is out, and ready to get smashed (gently) into the hot n' warm soil. The early days of this lil' baby girl will begin now. SOOOO excited x to the d.

My medium starts to gather salt because of too much nutrients and it affects the plant, i washed it the last two waterings and I hope it’ll get better :)

Week 7 light time 12/12 from now 🍀✌️ Day44Little more lst and defoliation 💚✌️

Rsv11 has been growing good. She was neem oil treated 4 days ago and again today. I have seen evidence of a pest, but not seen the pest itself. So I am unsure what exactly it is. If the neem oil works, I should be free of the pest after today. She has been growing good. Once I get these pest gone, and she recovers. It will he time for flowering. Thank you Spider Farmer, and Terpyz Mutant Genetics. 🤜🏻🤛🏻🌱🌱🌱 Thank you grow diaries community for the 👇likes👇, follows, comments, and subscriptions on my YouTube channel👇. ❄️🌱🍻 Happy Growing 🌱🌱🌱 https://youtube.com/channel/UCAhN7yRzWLpcaRHhMIQ7X4g

All good.

Today day 85 I chop down 1 orange sherbat very dense and hard bud but not too big bud let her dry for 5days Other plant very big bud but it's bit fluffy not hard as otherone so I decide to let her atleast 2more week to get denser will upload more pic D87 I take her out for flush due run off ppm was again 1400 so I wash her with 5L plain water this plant very very big bud but foxtailing and fluffy anyone know what to do to make her more dense?

Hello growers 15th - feed in tea, also added clips and raised net. She is a thirsty girl now im adding 1L per 24hrs. DLI 4.2 PPFD 65 Cruising

Se realizó una defoliación en la parte más baja y en las 2 hojas más grandes de la parte superior para que pudiera entrar de mejor manera la luz a los brotes más pequeños. Se aplicó Voodo Juice para las raíces y Top Bloom para la floración, ya todas tomaron de buena manera el cambio del fotoperiodo. Seguimos 👽 ...

Coming along slowly - fed some Fox Farms Grow Big and will likely move on to some fish fertilizer next week. Very excited to see new growth!

Good morning little miss sunshine. Using heatmat at 24°C for the first week. Light Power: 40% Soil in the final pot: I use 80% Dope Soil - florganics & 20 % garden compost. The soil was used by two grow sessions before. In the last one I added the compost. For this grow I added a 1/2 cup Dolomite limestone in the middle layer of the earth. To prevent Ca, Mg deficiency. Covered with 5cm old mulch. Watering with 2,5L tapwater and let it flow DAY 6 Cover open and she can feel the first breeze. DAY 7 Welcome in the final 25L pot .

She continues to develop nicely. Unfortunately I managed to break two more branches, from both she recovered instantly and the branches started to heal already. (Need to be a bit more careful going forwards). The quick healing I would either account to the genetics, but would also contribute it to the rizothonic from canna, as her root system is also a lot further than the plants I grew before. She already smells super strong, can bare keep the tent open for long.

7/19 I’ve come upon the realize that I had been under watering to an extreme degree. I have since adjusted accordingly today and hope they look better tomorrow. Did remove some leaves and then found out I really shouldn’t have, hopefully I didn’t stunt them.i believe they are now flowering and next watering I will be adding some tiger bloom at very low strength. the newts I’ve given them have shown tip nute burn often and I have been very minimally watering so my conclusion is my soil was so full of nutes I could have waited until now most likely to start my first feedings. I’ve read about this and w ocean forest this seems to be the trend. Still really happy about the progress. Peace

😎

So I’ve pretty much done everything that I said I wasn’t going to do. Started the week out with a light defoliation and mid week I started the LST which she responded very well too. Twice a day I’m checking the pH and adjusting the straps. I’m now at full strength with her nutes and she has yet to show any deficiencies. Lastly she has shown some flowering signs 🙌🏼 this next month should be fun.

We are starting quite well, it is beginning to show its first signs of flowering, we expect a flowering of approximately 6 weeks that could extend to 8 weeks depending on the fattening let them have the buds

THERE IS 4 PHOTOPERIODS LEFT IN THE 5X5 TENT. I WILL BE MOVING ALL OF THE PHOTOPERIODS INTO THE 8X8 TENT ONCE ALL THE AUTOFLOWERS ARE DONE, THEN I WILL SWITH THE LIGHTS TO 12/12 FOR EVERYTHING MARS HYDRO VISIT: www.mars-hydro.com www.marshydroled.ca PROMO CODE: rocknroll VISIT THE ALIEXPRESS STORE: @marshydro_aliexpress Instagram: @marshydropenny Thanks for taking the time to read and check out my diary🤜🤛 TS3000 FEATURES: WIDEBAND SUNLIGHT FULL SPECTRUM LED GROW, Infinite close to natural sun light, suit for all plants whole stages indoor growing, rapid plant response from seed to flower, achieve maximum quality and quantity, much better than traditional HPS grow systems. HIGH REFLECTIVE & NOISE FREE-Fanless LIGHT BOARDS design will make your growing life easy and quiet, quickly heat dispersing material aluminum reducing light lost to aisles and walls, increase the light intensity up to 20%, allowing your plants receive more energy and without burning your plants for maximum headroom. HIGH EFFICIENCY ENERGY SAVING PLANT LIGHT, high-power NEW LED grow, Compares to traditional 3000 watt HPS lamp and other brand led grow light while only 450 watts true output with 1016 LEDs, more scientifically and energy-efficient! Perfect for 5' x 5' veg stage, 4' x 4' bloom stage, higher intensity in a MARS HYDRO grow tent, reflective area, or by crossing over using multiple TS3000. BOOM YIELD LARGE GROW LIGHT, NEWEST SMD LED technology provide highest PAR/LUMEN output(1095.6umol/), makes you get 30% higher yield compare OLD led lights, can get max yield at 2.5g/watt, less pay but get more yield, bring a amazing grow trip to any home grower as it beams huge amounts of light energy to plants below. COMMERCIAL LED GROW LIGHT, Updated easy dimming & daisy chain function, main light controlled, especially come with two waterproof and dimmable Mean Well Drivers, auto sensing power supply works on both 120VAC and 240VAC and 277VAC, suit for Large Rooms and Commercial Setups. Low Energy-Consuming LED Grow Light: Consuming 300w and also mounted with 1016 chips, TS3000 has the ability to replace a 450w HPS light while reducing 40% power intake. High Efficiency LED Grow Light: With overall light output PPF 343umol/S as well as amazing PPE 2.3 umol/j, it's 50% even more photon efficient and can assure a 30% more return than the old HPS/MH lights. Patent Highly-Reflective Hood Shape: The reflector design on TS3000 is patented, which can effectively gather the light dispersed in all directions to enhance its light intensity as well as assist plants in absorbing more light. Full Spectrum Plants Favorite Spectra: By the unique mix of spectra that makes most light in the 400-700nm waveband, incredibly conducive to plant photosynthesis. Adequate IR(730-740nm) is additionally consisted of in the range to generate larger buds. Dimming And Daisy Chain Feature Available: Upon an independent dimming button on the external driver, backing 0-100% settings adaptation and up to 30 LEDs daisy-chained in a group, it supplies different light levels for various plant stages meanwhile saving energy. Safety Certifications And Service Warranty: CE, ETL, RoHS, UKCA security certifications accepted, 50,000 hours durability, 5-year service warranty, and local after-sales repair 5x5 GROW TENT: LOCK ALL LIGHT INSIDE MARS HYDRO Indoor Grow Tent interior is made of diamond mylar which is highly reflective. (Other brand's mylar and reflective rate is as low as 50%, won't provide efficient light. )MARS HYDRO 1680D canvas, being double stitched, it is tear proof and has perfect light locking. Mars Hydro's grow tent keeps 100% lighting beams inside and helps your plant absorb more lights. EXTRA-THICK --No light leaks or rips at all DURABILITY GROW TENT Stable metal corner adapters and poles are the trustful supporters of the tent, standing sturdy, neither rusting nor paint-falling, quick easy tool-free installation. Mars Hydro's heavy-duty metal zippers, with double layer black lining, are the best on the market which create a light-proof seal EASY OBSERVATION FOR YOUR PLANTS. Special observation windows are made by double layers of cloth. Observe the growing conditions of your plants without opening the tent and avoid disturbing plants. The observation window also serves to dissipate heat and ventilate air AUTOMATIC 6 INCH EXHAUST FAN KIT W/ CONTROLLER: Mars Hydro 6'' Inline Fan uses a mixed-flow design to maintain peak performance in a high static pressure environment. GROW TENT FAN: MARS HYDRO inline fans are designed to ventilate hydroponic grow rooms, transfer heating/cooling, cool AV closets, and exhaust odors. EFFECTIVE VENTILATION: Variable speed controller for easy fan speed adjustment. Optimal ventilation for your planting. LOW NOISE LEVEL: Durable plastic fan housing and blades for extremely low noise(32dB-A); create a truly quiet growth environment. EASY INSTALLATION: Removable duct ends with locking tabs for quick removal and easy maintenance and a cord length of 4.9 feet for hassle-free setup. This grows tent fan with a controller for easy fan speed adjustment. BASIC PARAMETERS: Ventilation exhaust fan size: 6” | Dimensions: 315mm*225mm*210mm. | Weight: 2.7. | Airflow: 402CFM | Noise: 32dB-A | Bearings: Dual Ball. 

D15/V11 - 15/04/23 - Added water and nutes EC 0,7 pH 6.4 D16/V12 - 16/04/23 - Nothing D17/V13 - 17/04/23 - Nothing D18/V14 - 18/04/23 - Added water and nutes D19/V15 - 19/04/23 - Nothing D20/V16 - 20/04/23 - Added water and pH+ D21/V17 - 21/04/23 - Nothing