The Grow Awards 2026 🏆
Likes
Comments
Share
Its the last week befor we Flash. I love the buds, they are fat like a cola can. They smell like lemon, its a crazy pheno
Likes
26
Share
Bewässerung: 2500 ml jeden 3 Tag in der vierzehnten Woche pH-Wert: 6.3 EC-Wert: 1,6 mS/cm Temperatur: 28ºC Luftfeuchtigkeit: 50% Schädlingsbekämpfung: Wir haben seit ein paar Tagen die Nematoden in der Erde und es sind schon deutlich weniger Trauermücken unterwegs. PPFD: 600 µmol/m²/s DLI: 38 mol/m²/Tag Düngemittel: Sie bekommt ab jetzt nur noch Wasser. Besonderheiten: Müssen jeden Tag Gießen durch die hohen Temperaturen. -Tag 92 Heute wieder Wasser bekommen, Dünger bekommts ja keinen mehr -Tag 93 Heute haben wir ihre Trichome Kontrolliert sie sehen schon sehr Milchig aus. -Tag 97 Heute wieder Wasser gegeben, sie hat so ca. 75 bis 80% der Trichome Milchig, sie wird nächste Woche geerntet.
Likes
48
Share
Raspberry Ripple #1 and #2 (Flowering Plants)- This week really threw me a curveball! I had a major equipment failure. On Wednesday (day 24 of flower) I went to check on the flower room about 3 hours after my lights should have turned on and noticed my S44 Ionboard was not powered on. I quickly began to asses the situation and determined that my actual driver on the light fixture was broken and there was no power running to the light. The light was also my main power source for my controller 69 pro, so it went off as well and was unable to let me know the light was powered off via the app. When I noticed this I called a grow-bro of mine, and asked if I could borrow his Viparspectra Par 700 he had, he purchased the AC Infinity Evo 10 Ionframes and had that light sitting around! Shout out to @Mr. Wowie for the quick save. With his help, I was able to get a light back over my plants within 4 hours. Not ideal but better than it could have been! The next day I was able to purchase and install a used HLG 550 locally. This light is even meaner than my old ionboard! Boasting 480 watts of power from the MeanWell drivers, Samsung LM301H diodes, it was repaired and has an import heat sink, however it doesn't seem to get too hot. It's very similar to my old light and the plants seem to be doing fine, with no signs of herming or extreme stress. This week I noticed both Phenos flowers are really beginning to swell up. By the end of flower I'm sure these nugs will be almost soda can sized. The number 1 Pheno is still purple as can be and has clearly not ceased it's anthocyanin production. The number 2 Pheno caught my eye, or more my nose this week it's giving off an awesome terp profile. It has a bit fruitier of a smell than the #1, sort of like a good peach strain, super lemon haze or good strawberry Pheno. Where it's really in your face. The #1 Pheno is total candy, sweet. Huge diversity in these 2 phenos! Very cool to see. I installed a new Dehumidifier this week to keep up with the humid spring. I purchased an Air Plus 50 pint on sale on Amazon. This dehumidifier works very well and has been doing a wonderful job at managing humidity levels in the flower room. I gave the last feeding of build a flower and tm-7 this week and will be watering with only water and Fish Sh!t from this point unless the plants tell me otherwise. Raspberry Ripple #1 and #2 (Clones)- The clones did not have as interesting of a week, however they have began shooting more branches out and are developing the stereotypical thick Raspberry Ripple stalk, we've come to know and love these last 5 months. They seem to be on a good growth pace to run a perpetual cycle with. I feel they'll be pretty well ready for flower by the time I harvest the original plants. I still plan to keep a mother of each Pheno. Then begin my next Pheno hunt of Whiteberry by Paradise seeds. That pretty much wraps this week's entry up! Until next week, Happy Growing!- Starfish
Likes
12
Share
She’s looking good. She’s taken well to LST She should be a 9-10 week plant so I think I will feed her once more.
Likes
1
Share
Apport en PK 15/17 organique par griffage. Arrosage au thè de compost oxygéné. Defoliation légère pour dégager les sites de fleurs.
Likes
22
Share
* ***************** Week 1 of Growth From Seed, April 11 to 17, 2020 - Days 1 to 7 from germination ********************** * Okay, we are off running now. Through germination and was delighted to experience 100% success rate👍 Two girls this run and now have a GSC and a GSC2 this run. GSC was chosen for the first to break the surface and while the second GSC to come up is now GSC2, she was actually the third to break the surface. Excited to run this strain from Fast Buds.......there are newer strains but sometimes a classic is good😃 Greater focus on VPD this run. Already pushing the humidity higher than I ever have with having controller set at 72% with temperature at 79 degrees. I have been reviewing the numbers and I have normally been close but it looks like I have to raise everything by about 10% and for a few weeks long😬😬😬😬😬😬 Trust the science and lets learn some more from this grow!!! *****Daily Detail: Apr 11, Day 1: - VPD - 1.2 - 500ml first watering given with nutrients as listed. (minus Velokelp) - pH water to 5.6 - Girls up and looking like they are ready to go. Apr 12, Day 2: - VPD - 1.0 - 500ml feeding with VeloKelp @ 2ml/L, Piranha & Voodoo @ 2ml/L. pH to 5.6 - lowered light intensity a bit more. - Both girls are doing very well. Nice leaf colour and tips are turning up now!! Apr 13, Day 3 - VPD - 1.2 - 500ml water with 0.5ml/L each of Piranha & Voodoo, Dual Fuel. - 300ppm with 5.4pH. Apr 14, Day 4 - VPD - 1.1 - 500ml water with Virtathrive and Piranha & Voodoo Juice @ 1ml/L, VeloKelp @ 2ml/L, and SensiCal @ 0.5ml/L. - 210ppm with 5.5pH. - the girls are very happy and colour looking good. Tips are pointed way up on GSC and GSC2 seems happy but may have a little more going on below the soil right now so a little slower looking. Apr 15, Day 5 - VPD 1.0 - 250ml water with VeloKelp @ 1ml/L. - 95ppm with 5.4pH - GSC really looks happy and hope she is pushing out some serious roots below:) - GSC2 is holding her own looks fine. Apr 16, Day 6 - VPD 1.0 - 500ml water with Piranha & Voodoo @ 1ml/L, Vitathrive @ 0.5ml/L, Dual Fuel @ 0.5ml/L. - 300ppm with 5.8pH - GSC still looking pretty happy and continues to point tips up. - GSC2 is standing up a little more and over looking like a nice. - Moved all the girls today one spot in a clockwise rotation. - Noticed more residual moisture on the bottom of the pots than anticipated. Apr 17, Day 7 - VPD 1.1 - Turned on flower light on UnitFarm this afternoon and they are happier. - Both ladies up and proud to be alive this afternoon. - Dry out day today and no added water/feed, just misting. - Let the medium dry out a bit and give a nice week 2 feed tomorrow.....they are ready for a little more nutrients now.
Likes
10
Share
Fast buds genetics are freakin awesome, I can’t wait to try some more soon, Mephistopho is next though. Total Weight was 78 grams Dry, I dried for 9 days, 65 degrees and avg of 50ish humidity, was perfect but it was stable. Smells of candy gas, had a lot of larf and buds I just didn’t want to trim so I have 37grams of trim to get some keif out of. Thanks for checking out this awesome grow of mine!
Likes
16
Share
Another good week for these girls, they are getting more and more thc day by day, still some weeks to go as we are still on the week 5, this strain is a really easy to grow strain which dont require that much attention, i just provided some guanokalong powders and shes good to go 👍😁
Likes
Comments
Share
Fed GH 3 part with Terpinator in flower and some recharge occasionally.
Likes
11
Share
Likes
15
Share
Fully into flush this week just running 0.6 tsp per gallon(3g/gal) of the FullTilt from FloraFlex. Next week I'll be running plain water ph'd to 6.3-6.5 for the last week of flush. That being said, Plant #1 is developing quickly though she may need an extra week or two to finish out. If she does I will probably pull her out of the autopot system and put her directly in the middle to finish out while my next run is starting in the system. Been an exciting grow watching this cotton candy do her thing, cannot wait to see what the final week has in store! Have also narrowed down my deficiency that began last week down to possibly cal/mag deficiency. Will correct this is the feeding schedule next run.
Likes
14
Share
The Sensi Seeds Research breeding project has created eleven cannabis seed varieties. How? By combining new cannabis cultivars with a selection of strains from their long-established cannabis gene bank. For the first time in thirty-six years, they are opening the doors of the Sensi Seeds Research and Development Department. Week #4 I have let the plants grown their 4th node and have topped them all at the 3rd node during the week. All the plants responded well and started to grow 2 tops. All the genetics looks good with no shitty weird plants. Every plants are in "V" and excited to grow. The light coverage of the Mars-Hydro SP250 is good enough to leave them another week without adding more light. Using only 245w for the lightning during 5 weeks is very economic 👍 Last week feeding has been done in time, everyone is green lush. No need to add any nootz this week, just giving plain pH’d water. (I’m looking for a job in the Cannabis industry as Master Grower, Mineralogist, Quality Control)
Likes
38
Share
@Aedaone
Follow
We're starting off this week with more thunderstorms. They will only be for the first two days of the week. This week is much cooler. The rain kept me from feeding my generative one formula nutrients with their water. On day 2 these are still feeding on the 800ml of coop poop 2-4-3 I top dressed with. They are nice and green and the centers are showing it was a little hot but it should grow out of that in a day or two. Day 5 of this week. Everything grew into the fertilizer. Buds are stacking and trichromes are beginning to show on the leaves. The smell is very noticeable now. The #1 plant has a smokey cheese smell. The #2 plant is skunky and sweet but more skunky. The #3 plant is a little behind the other two and isn't really putting off any distinct smell yet. Day 7 I'm starting to see trichromes
Likes
7
Share
@Mrg7667
Follow
Harvest was about 4 days total and i ended up dying plants for 12-14 days just depening on what was cut when and also structure because i wet trimmed one plant and let the others dry/ cure with the sugar leaves. I did that because i fivure they have tricombs and thats where all the good stuff is so might as well 🤷‍♂️ they will get the post cure trim probably about week 2-3 thats when ill post final video of all pheno! Curing at about 65% humidity trying to stay tward that higher side only because i am in colorado and buds dry out so fast, a couple pheno where in the high 50s the firdt two days so j re moistened them with a damp paper towel and just have been keeping an eye on them. I gotta say as a novice grower leaving sugar leaves is helping me determine the moisture level in my jars
Likes
37
Share
🌱 Germination Journey with Terpyz Mutant Mentha de Croco 🌱 Hey Grow Fam! Today kicks off an exciting adventure with Terpyz Mutant Mentha de Croco genetics. I’ve got 10 regular seeds ready to sprout, and I’m looking forward to discovering some beautiful female phenotypes—and maybe even a standout male for potential future breeding. It’s been a while since I’ve worked with regular seeds, so I’m thrilled to dive in! Germination Process Overview: Here’s a step-by-step rundown of the germination setup and process, with a special focus on the equipment and nutrients that are helping these seeds thrive right from the start. Step 1: TheCannaKan Germination Pod 🌱 For germination, I rely on TheCannaKan—a device I’ve come to love and trust. It’s designed to create the perfect microclimate for seed germination, and within just 24 hours, the seeds started showing signs of life. By the 32-hour mark, they were all ready to be transferred to the next stage! I can’t recommend this gadget enough for anyone serious about getting strong, early growth from their seeds. • Why TheCannaKan? • Humidity Control: Ensures seeds stay hydrated without oversaturation. • Stable Temperature: Maintains an even temperature around the seeds, so there’s no shock or stalling. • Enhanced Oxygenation: Keeps fresh air circulating, helping prevent mold and ensuring seeds don’t suffocate. Step 2: Transfer to Root Riots & Aptus Holland Supplements 💧 Once the seeds were sprouted, I transferred them into Root Riots, known for their excellent water retention and structure that encourages strong root growth. Root Riots also have a pH-balanced, spongy texture that makes it easy for roots to penetrate, promoting sturdy, healthy root systems. At this stage, I started using Aptus Holland’s Regulator and Startbooster at 1ml/L each. Here’s why I chose these products for early growth: • Aptus Regulator (1ml/L): Helps strengthen the plants against environmental stresses by supporting cell wall structure. It’s a fantastic choice for giving young seedlings an early boost in resilience. • Aptus Startbooster (1ml/L): This product provides essential microbes and nutrients that stimulate root growth and early plant vigor. Especially for regular seeds, the early root development makes a noticeable difference in later growth stages. Step 3: Lighting with Future of Grow (FOG) LED at 200 PPFD 💡 For lighting, I’m using a Future of Grow (FOG) 600W LED. For the germination stage, I’ve dimmed it to around 200 PPFD (photosynthetic photon flux density), which provides just enough light for healthy, strong seedling growth without overwhelming them. • Why Low Intensity? • 200 PPFD ensures that young plants aren’t exposed to too much light, which could cause stress or stunting. This level of intensity is perfect for encouraging healthy development without risking “stretching.” • The FOG LED provides a balanced spectrum tailored to plant growth, setting up these young sprouts for success as they grow. Step 4: Environmental Control with TrolMaster Tent X Controller 📲 For monitoring and control, I’m using the TrolMaster Tent X Controller, which lets me dial in every aspect of the environment to make sure these little ones have the perfect conditions for germination and early growth. • TrolMaster Benefits: • Precision Control: Adjust temperature, humidity, and lighting all in one place. • Notifications: Sends updates in real-time to my device, so I can make adjustments as needed without being physically present. • Consistency: Maintains stable conditions around the clock, reducing stress on seedlings and ensuring they’re thriving. Grow Tips & Reflections: Germination is one of the most crucial stages in a plant’s lifecycle. Starting with strong genetics like Terpyz Mutant Mentha de Croco, combined with a solid germination setup and the right nutrients, creates the foundation for a successful grow. 💡 Quick Tips for Fellow Growers: • Hydration Balance: Don’t oversaturate! Moisture levels should be high enough for the seeds to sprout but not so wet that they drown. • Light Management: A low PPFD for young seedlings prevents stretch and keeps nodes tight, preparing them for a healthy vegetative phase. • Environment Consistency: Use a reliable controller like the TrolMaster Tent X to manage your settings, and consider monitoring tools for real-time adjustments. Shout Outs to the Community: Big thanks to Terpyz Genetics for these incredible seeds, Aptus Holland for their top-notch nutrients, Future of Grow for the stellar LED lights, and TrolMaster for the amazing controller. Also, shout out to all of you in the growing community—you make this journey exciting and filled with endless learning. Let’s keep growing and sharing together! That’s it for the germination update! Next up, I’ll be monitoring growth closely to identify strong females (and maybe a standout male for breeding). Stay tuned for updates on our Mutant Mentha de Croco adventure—this is just the beginning! Genetics - Mentha De Croco https://terpyz.eu/products/menta-de-croco-fern-type?_pos=1&_sid=e9237cbcb&_ss=r DogDoctorOfficial Discount Codes @ terpyz.eu - DOCTOR 15% off Nutrition - @aptusholland https://aptus-holland.com/ Led Power @ F.O.G. Future Of Grow https://www.thefuturofgrow.com/en/online-store/BLACK-SERIES-600-p489093171 Controls @ TrolMaster https://www.trolmaster.eu/tent-x As always thank you all for stopping by, for the love and for it all , this journey of mine wold just not be the same without you guys, the love and support is very much appreciloved and i fell honored with you all in my life With true love comes happiness Always believe in your self and always do things expecting nothing and with an open heart , be a giver and the universe will give back to you in ways you could not even imagine so Growers Love To you All 💚
Likes
2
Share
Day 93 got the tent open to try keep the humidity down