Likes
Comments
Share
@deseed_uy
Follow
Hace unos dias puse los ultimos clip lst para nivelar las ramas mas altas del medio, muy orgullosa q pude hacer bien el scrog quedo re lindo
Likes
233
Share
🐶 🐕 🐶 🐕 🐶 🐕 🐶 🐕 🐶 So this diary is dedicated to my Big Boy Midnite 🐶 Due to his age and trouble with his hips , he needs a little help so I will be making him special CBD and CBG Treats .... So keep in mind that I will be doing a Bubble Hash Water Extraction with the SDR and CBG once that's done and dried I will be Decarbing it by then placing it on a sheet of parchment paper and placing in over at 220 degrees F for 20 to 25 min to fully decarb it . Get ready for a paw-some treat that your furry friend will go nuts for! These peanut butter CBD or CBG treats are made with wholesome ingredients like flour, rolled oats, and natural peanut butter. Perfect for a special treat or a relaxing snack, your pet will love these bite-sized delights! Ingredients: • 2 cups of flour • 1 cup of rolled oats • 1/2 cup of natural peanut butter • 1/4 cup of water or beef and or chicken broth • 2 teaspoons of decarbed CBD or CBG Instructions: • Preheat your oven to 350°F. • In a large mixing bowl, mix together the flour, rolled oats, and natural peanut butter. • Add in the water and or broth and the CBD or CBG, and continue to mix until well combined. • Roll out the mixture to about 1/2 to 5/8 inch thickness on a lightly floured surface. • Cut the mixture into bite-sized treats using a cookie cutter. • Place the treats on a baking sheet lined with parchment paper. • Bake for 20 minutes, or until lightly golden brown. Allow the treats to cool completely before serving to your pet. Who says bacon is just for humans? These CBD or CBG treats are made with a yummy mix of flour, rolled oats, and cooked bacon. Your pet will love the taste and the benefits of CBD or CBG in each bite. Ingredients: • 2 cups of flour • 1 cup of rolled oats • 1/2 cup of cooked bacon • 1/4 cup of water or Chicken and Beef Broth • 2 teaspoons of decarbed CBD or CBG  Instructions: • Preheat your oven to 350°F. • In a large mixing bowl, mix together the flour, rolled oats, and cooked bacon be sure to grind up the bacon. • Add in the water and or broth as well as the CBD or CBG, and continue to mix until well combined. • Roll out the mixture to about 1/2 or 5/8 inch thickness on a lightly floured surface. • Cut the mixture into bite-sized treats using a cookie cutter. • Place the treats on a baking sheet lined with parchment paper. • Bake for 20 minutes, or until lightly golden brown. Allow the treats to cool completely before serving to your pet. Happy Growing And Happy Smoking and for all the Puppies out there Happy Snacking 😊 Side Note , I will be adding future pictures and video of the process of making the cookies as well as letting everyone know how it helped Midnite 🐶 Plus I will also give it a go and give my thoughts on the terps and the effects ... 👉Soil Provided by ProMix.ca 👉Nutrients Provided by Agrogardens 👉Lighting Provided by MarsHydro.ca 👉Seeds Provided by Kannabia Seeds ...
Likes
3
Share
Está semana la HellfireOG de Kannabiaseeds va creciendo muy bien, lo que se me está volviendo un poco amarilla. Para solucionar eso le he estado echando fertilizantes de crecimiento que tienen bastante nitrógeno asique espero que vuelva ha tener un color bueno 💪
Likes
1
Share
Likes
26
Share
On day 56 the girls were 70/30 cloudy to amber trichomes (my preference) they were ready for harvest. I took clones from pheno 3 and pheno 5. I will be monster cropping these clones to preserve their genetics. the girls went into 48 hours of darkness right after. On day 58 the girls were chopped. The tent was cleaned top to bottom and we started our drying process. We will be shooting for 60-65 percent RH with a temp of 60 degrees. I expect this dry to go 10-14 days. I will update a final dry weight, pics, and smoke test in a few weeks after the cure. I’ll also be posting my last seed to harvest episode of this series on my YouTube channel that can be found in my profile link or “probation2propagation” on YouTube. Stay tuned.
Likes
22
Share
@smoker420
Follow
started to realy put effort in making bud sites now gave her firat organic bloom feed mainly humic and fulvic acids hoping or at least 6 to 7 oz of this one
Likes
23
Share
* ***************** Week 1 of Growth From Seed, April 11 to 17, 2020 - Days 1 to 7 from germination ********************** * Okay, we are off running now. Through germination and was delighted to experience 100% success rate👍 Excited to run this strain from Mephisto. It is supposed to be a couple of their strongest and fruitiest crossed. My Skywalker was a good experience and I could have ran her again but I wanted to try another strain from this breeder and see if there are some similarities......this sounded fun👍😋 Just popped one of these girls and will probably miss some timing but that is how the game works.......learn from this one with hopes of dialing in the siblings😀👍 Greater focus on VPD this run. Already pushing the humidity higher than I ever have with having controller set at 72% with temperature at 79 degrees. I have been reviewing the numbers and I have normally been close but it looks like I have to raise everything by about 10% and for a few weeks long😬😬😬😬😬😬 Trust the science and lets learn some more from this grow!!! *****Daily Detail: Apr 11, Day 1: - VPD - 1.2 - 500ml first watering given with nutrients as listed. (minus Velokelp) - pH water to 5.6 - Girl is up and looking like she is ready to go. Apr 12, Day 2: - VPD - 1.0 - 500ml feeding with VeloKelp @ 2ml/L, Piranha & Voodoo @ 1ml/L. pH to 5.6 - lowered light intensity a bit more. - She is getting taller now. Seems to be speeding up. Still the slowest of the group. - She seems most affected by too much light. Apr 13, Day 3 - VPD - 1.2 - 500ml water with 0.5ml/L each of Piranha & Voodoo, Dual Fuel. - 300ppm with 5.4pH. Apr 14, Day 4 - VPD - 1.1 - 500ml water with Virtathrive and Piranha & Voodoo Juice @ 1ml/L, VeloKelp @ 2ml/L, and SensiCal @ 0.5ml/L. - 210ppm with 5.5pH. - She is doing well. Starting to see the first set of leaves growing a little odd. Both offset to one side of the pot. Good progress though little early to worry about some things. Apr 15, Day 5 - VPD 1.0 - 250ml water with VeloKelp @ 1ml/L. - 95ppm with 5.4pH. - She was a little slow and little dark but she seems to be coming along. Once she strengthens up the bend should come out of her stem👌🤞 Apr 16, Day 6 - VPD 1.0 - 500ml water with Piranha & Voodoo @ 1ml/L, Vitathrive @ 0.5ml/L, Dual Fuel @ 0.5ml/L. - 300ppm with 5.8pH - She is looking more healthy today. Being more robust. - Her second set of leaves are not as progressed as the other girls. Just an observation. Apr 17, Day 7 - VPD 1.1 - Turned on flower light on UnitFarm this afternoon and they are happier. - Dry out day today and no added water/feed, just misting. - Let the medium dry out a bit and give a nice week 2 feed tomorrow.....they are ready for a little more nutrients now. - Not a lot to report today. She is happier than yesterday and getting bigger......can’t ask for much more👍💪👌
Likes
8
Share
Eccoci di nuovo qui!!! Super eccitato per questa nuova collab con Anesia Seeds, team davvero al top, che mi ha dato l’opportunità di testare questa nuova genetica e di condividere i progressi con tutti voi!!! Come sempre partiamo nei bicchieri per poi travasare.. Questa volta verrà svolto tutto sotto la Lumatek Zeus 465 ProC, mi aspetto molto da questo ciclo!! Settimana pazzesca!!!! Piante davvero incredibili!!! Grazie a tutti per il supporto ❤️🍀🔥
Likes
9
Share
This was an experiment grow. Seeing if I can grow and flower in a 1 gallon pot with organic amendments. These buds actually turned out better than when I grew this same cut early this year with a bigger pot. Chopped at day 55 of flower on 10/21/25
Likes
1
Share
Likes
1
Share
@Dendegrow
Follow
🌈 Mental Rainbow (Sweet Seeds) – Week 7 | Flowering Day 1 🌸 Here we go – the bloom begins! 🚀 Yesterday I flipped her, so today is officially Day 1 of flowering. She’s thriving in my own homemade Living Soil, and the root structure is crazy thanks to my custom booster 🌱. The smell is already phenomenal – sweet, intense and super fresh 🌿💨. Today I removed a few leaves 🍃✂️ to let the light penetrate deeper into the canopy. She also got just a light dose of Greenhouse Feeding Bloom – nothing heavy, since the Living Soil is already full of life ✨. This lady looks ready for a colorful journey – follow along to see how bright this rainbow will shine 🌈🔥. --- 🌈 Mental Rainbow (Sweet Seeds) – Woche 7 | Blütetag 1 🌸 Jetzt geht’s los – die Blüte startet! 🚀 Gestern umgestellt, heute offiziell Tag 1. Sie wächst in meiner selbstgemachten Living Soil Erde und hat durch meinen eigenen Booster eine extrem starke Wurzelstruktur entwickelt 🌱. Der Geruch ist schon jetzt phänomenal – süß, intensiv und richtig frisch 🌿💨. Heute habe ich ein paar Blätter entfernt 🍃✂️, damit das Licht besser nach unten kommt. Dazu gab’s eine kleine Portion Greenhouse Feeding Bloom – nur ganz leicht, da die Living Soil schon genug Power hat ✨. Das wird ein richtig bunter Run – bleibt dran und schaut zu, wie dieses Rainbow in voller Pracht erstrahlt 🌈🔥.
Likes
9
Share
The koshers are going great, just transplanted to bigger containers which are the definitive once, no food provided yet im thinking to start slowly next week as the soil i have is quite strong. Also i decided to just keep the 2 plants which are exactly the same for the competition, the other plant which looked different is removed to another room (of course maybe the buds are the same but at the end im looking for the best looking plants for this competition) We also removed the top this week to create some more tops 😁
Likes
12
Share
@AllieO
Follow
2/15: Bud sites are really starting to thicken up. I think she's going to have to fat buds on her in the future. Gave a pH balanced flush today and rotated her in the tent. 2/19: Unsure if I have a light burn situation or a nutrient situation. Opted for another pH balanced rinse in lieu of nutes. Unfortunately I can't raise my light any higher. Will monitor..
Likes
28
Share
Likes
4
Share
Did LST and topped Pheno 1 & 2, 3 is too funky to mess with. I think PH was just my issue and possible too high intensity light as I lowered to 60%, but also brought my PH to 6.5 so I'm guessing that helped too.
Processing
Likes
6
Share