Day 50 the plant has been growing at an incredible speed and has a very very large flowering stretch in fact I only have left 5 inches to raise up my light and then I'm going to have to do something to keep an eye on those branches so they don't stretch anymore or at least they can have enough light to proper development. From all the plants I have grow indoors this one is the only one that has make my light stretched to the top of the tent I guess it's a good problem to have. Other than the incredible stretch the plan seems to be healthy and doing pretty well the flower is development and I'm looking forward to see how this is going to turn out. Day 52 I have rise my light to the top as high as I can and she still grow past the light towards the exhaust system I had to tie her down in order to create an arch and in that way make her receive enough light instead of growing over the top of the light where there is actually no sufficient light if this problem persist I will have no choice but to do super cropping on the tallest branches and see how they react to that I decide to take some cuttings I'm trying to clone this one to see if I can get her outside in the summer in another buddy house and see how she reacts to challenging Ontario weather. Day 53 I have to Super crop several branches Unfortunately they were growing straight into the light becoming burned by the intense light I hope the plant doesn't react to bad to HST and still deliver awesome buds thank you for reading I will continue to update have a happy grow.

A lot of TLC this week and she has bounced back! 😁Really had to dial in and give her the best environment possible. Flowers started to pop up below the canopy so I’m guessing all the defoliation was successful and she is coming back stronger than ever. Will watch for fox tailing as buds form to see if she is reacting from severe light stress early flowering days. Notes from the week: 9/15: Cut burnt tops off her today. Trimmed a lot of the burnt leaves. 9/19: She has recovered nicely from the light stress/burn. Flower stage does not seem to be affected to much. I have noticed some purple calxys and upper leaves near some tops seem to be fading and showing some purple as well. 😈

This plant was a beast all around from the start it had some crazy strong vigor. I could see the plant being able to grow outdoors if you steak up the branches in late flower. The buds were huge and very round and dense. The tricomb density was ok it wasn’t a frost party or anything but it’s got some big white tricomb heads. The smell is amazing super strong candy gelato smells with some gas skunk on the back end. Other than needing tied with string it using steaks in late flower it was a great plant. Still a 10/10

Some mold formed on the rockwool, I rubbed a papel towel with alcohol. High umidity this week... I'm afraid of losing my plant. The buds are getting big, I can notice a small odor of pine, it's gooooood! I think there is some mildew forming too, so I sprayed neem oil. Let's see what's gonna happen

Hello my friends 👩‍🌾👨‍🌾, This 8th flowering week was good 👊, maturation Buds continue 🌲❄️, I thought it will be the last week, but need one more. The end is for this week end I think, for moment trichromes not really full milky, and I like something like 20% amber. I've started flush with flash cleaner The senesence is started on the #3. 💦 1 Watering this week 1.8l/plant . Water + flash cleaner PH@6 Lamp @100% Bisous 💋😘, and see you next week. Thanks community for follow, likes, comments, always a pleasure 👩‍🌾👨‍🌾❤️🌲 Mars Hydro - TS 1000 https://www.mars-hydro.com/ts-1000-led-grow-light Mars Hydro - FC3000 https://www.mars-hydro.com/fc-3000-samsung-lm301b-led-grow-light Mars Hydro - SP3000 https://www.mars-hydro.com/sp-3000-samsung-lm301b-greenhouse-led-grow-light The High Chameleon - Bisous Au THC 💋💋🌲🌲😘😘 https://www.thehighchameleon.com/shop/bisous-au-thc-83

Week went good I think, Janis added 6 cm, they are using less water, so the end/beginning is soon, but that's the whole point I don't have a clue when it is best to start harvesting process, should I wait for these white pimples are more amber ? I changed back to 18-6 I felt Janis getting tired and am trying to get her smile more, would it change if I added more light ? I am going to do so, when the postman arrive.

I have moved the pots 💚

Entrando en la Semana 6 de floración La cantidad de resina a aumentado considerablemente, el olor es muy fuerte pero agradable, los colores se están destacando en todas las plantas . El engorde se está viendo reflejado semana a semana

Day 29 Veg transplant day

At this stage, I introduced the SCROG and trained the branches as much as possible to achieve an even canopy, with uniform bud development and maximum coverage of the grow tent.

This is week 5. My schedule didn’t let me go back and adjust. You’ll see day 33-39 and a new clone (which in hind sight ended up being a male and waste of time)

Into week 8, growing well, buds continue to stack up on this very singular up and down outdoor plant. Smells good, excited to see how the next few weeks go. Scratched 1/4 cup of Coast of Maine Fish Bone Meal into the soil and watered late in the week.

You don't become confident by shouting affirmations in the mirror, but by having a stack of undeniable proof that you are who you say you are, outwork your self-doubt. Nitrogen fixation is a chemical process by which molecular nitrogen (N2), which has a strong triple covalent bond, is converted into ammonia (NH3) or related nitrogenous compounds, typically in soil or aquatic systems but also in industry. The nitrogen in air is molecular dinitrogen, a relatively nonreactive molecule that is metabolically useless to all but a few microorganisms. Biological nitrogen fixation or diazotrophy is an important microbe-mediated process that converts dinitrogen (N2) gas to ammonia (NH3) using the nitrogenase protein complex (Nif).[2][3] Nitrogen fixation is essential to life because fixed inorganic nitrogen compounds are required for the biosynthesis of all nitrogen-containing organic compounds, such as amino acids and proteins, nucleoside triphosphates and nucleic acids. As part of the nitrogen cycle, it is essential for agriculture and the manufacture of fertilizer. It is also, indirectly, relevant to the manufacture of all nitrogen chemical compounds, which include some explosives, pharmaceuticals, and dyes. Nitrogen fixation is carried out naturally in soil by microorganisms termed diazotrophs that include bacteria, such as Azotobacter, and archaea. Some nitrogen-fixing bacteria have symbiotic relationships with plant groups, especially legumes.[4] Looser non-symbiotic relationships between diazotrophs and plants are often referred to as associative, as seen in nitrogen fixation on rice roots. Nitrogen fixation occurs between some termites and fungi.[5] It occurs naturally in the air by means of NOx production by lightning.[6][7] All biological reactions involving the process of nitrogen fixation are catalyzed by enzymes called nitrogenases.[8] These enzymes contain iron, often with a second metal, usually molybdenum but sometimes vanadium. Green clover (Fixation) White clover (Fixation) Red Clover. (Fixation) Yellow Clover. (Fixation, deeper roots) Sweet Thai Basil. (Terpenes) Italian Basil. (Terpenes) Chamomile.(Oil production) Borage.(Pest attraction taste) Lavender.(Pest attraction smell) Marigold(Pest attraction visual) Mycorrhizae are beneficial associations between mycorrhizal fungi and a plant’s root system. Mycorrhizal fungi spores germinate in the soil, creating filaments (hyphae) that penetrate the root cells, thus establishing a symbiotic relationship. This collaboration leads to the development of both intra-radical and extra-radical networks of filaments, enabling efficient exploration of the soil for enhanced access to nutrients and water. Consequently, these vital resources are transferred to the plant, resulting in numerous benefits for crop cultivation. Various mycorrhizal products are available in diverse formulations (powder, granular, and liquid), concentrations, and qualities. Ongoing advancements in products, technologies, and research are reshaping our understanding of mycorrhizae. Despite these positive developments, certain misconceptions persist. In the following discussion, we aim to clarify the truths and dispel the myths surrounding mycorrhizae products. MYTH #1 A HIGHER NUMBER OF MYCORRHIZAE SPECIES MEANS BETTER RESULTS. Contrary to common belief, having a higher number of mycorrhizae species in a product does not translate to better results; in fact, it often yields the opposite outcome. A plant can sustain only one association with a particular mycorrhizal fungi species. Introducing multiple species creates competition among them, which is not advantageous for the plant. The initial colonizer does not ensure the highest success; instead, it gains precedence. It is recommended to select a product with a concentrated presence of a single mycorrhizae species known for its effective performance, rather than opting for a product with multiple species at lower concentrations. MYTH #2 ECTOMYCORRHIZAE ARE EFFECTIVE FOR CANNABIS PLANTS. Although ectomycorrhizae can colonize five to ten percent of plant species, cannabis is not among them. Ectomycorrhizae do not penetrate the root cells; instead, they develop around the roots and on the exterior. For cannabis plants, it is essential to seek out endomycorrhizae. Endomycorrhizae are capable of colonizing 70% to 90% of plant species, including cannabis. Unlike ectomycorrhizae, endomycorrhizae penetrate the root cells, forming structures like arbuscules for the exchange of nutrients and water with the plant. MYTH #3 WHOLE INOCULANT (PROPAGULES) PERFORM BETTER THAN ONLY VIABLE SPORES. The propagule count specified on most mycorrhizae products indicates the presence of spores (viable and unviable), hyphae, and root fragments. However, it is crucial to note that only viable spores, those with the capacity to germinate, can successfully colonize a plant’s root system. Spores are to mycorrhizal fungi what seeds are to cannabis plants—a fundamental component enabling fungi reproduction. Consequently, even if a mycorrhizal product boasts millions of propagules, its effectiveness hinges on the presence of viable spores. Without viable spores, the product will not contribute to plant development. Therefore, the genuine value of a mycorrhizal inoculant lies in the quantity of viable spores it contains, as only viable spores can efficiently initiate symbiosis. MYTH #4 ALL METHODS OF APPLICATION YIELD IDENTICAL RESULTS. To establish the symbiosis, mycorrhizal fungi spores must be close to the plant roots. The optimal recommendation is to directly apply mycorrhizal inoculant to the roots, either in powder, granular or slurry form. This method ensures maximum proximity between the spores and the roots, facilitating a rapid establishment of symbiosis. Particularly with crops like cannabis, which have a short growing cycle, employing this technique is the most effective way to obtain optimal benefits. Alternatively, techniques such as blending the inoculant with the soil are effective, but there may be a delay in the establishment of symbiosis. This is because the roots need to grow and come into contact with the dispersed spores throughout the growing media. MYTH #5 MYCORRHIZAE CAN ONLY BE GROWN ON LIVING PLANTS. While the predominant method for commercially producing mycorrhizae involves growing them on the root systems of living plants (in vivo production), it is not the exclusive nor the optimal technique. In fact, this production approach has notable drawbacks that the “root organ culture” method just does not have (in vitro production). In vitro production occurs in meticulously controlled, aseptic laboratory conditions, allowing for the consistent generation of products that are viable, highly concentrated, species-specific, and free from pathogens. Achieving such precision and quality is impossible when relying on the cultivation of mycorrhizal fungi on plants exposed to external conditions. In conclusion, it is crucial to take all these factors into consideration when choosing the appropriate product for your crop to fully harness the wide array of benefits provided by a high-quality mycorrhizal product. STRONGER PLANT – Stress resistance. FASTER GROWTH – Improve plant structure and shorter veg time. INCREASE YIELD – Overall more biomass. IMPROVED QUALITY – Increase cannabinoids and terpenes content.

Hello everyone, Starting week 5 and the blueberry glue auto is showing since of flowering 💐. I did a defoliation on her gave her something to drink and put her back under 24 hours of lightening. Let's see how she looks next week. Thanks for stopping by and have a nice day. Growfather

Going well, going to repot one soon

Start of week 2 flower - days 22 to 28 October Light is at 90w and it will remain on the top of the tent for the entire grow. -------------------------------------------------------------------- 22/10/2020 - Transplanted #1 to a 2 gal pot, shes s bit sad due to over-watering. 23/10/2020 - Little hard bend on #2 applied quickly zip tied it. 27/10/2020 - Watered #2 added only Cal-Mag, runoff about 850 ppms. 26/10/2020 - Increased the light to 100w. 28/10/2020 - Watered #1 with Cal-Mag and Great White.

No signs of flowering yet, maybe slight formation of calxys beginning. Been spraying with molasses, neem, cal mag and liquid kelp (bioweed) and superthrive just once to hopefully delay flowering to increase yield. P.S. if youre new at growing DO NOT try this unless you know what your doing with hormones etc. Theres a chance it can turn your girls hermie. Just be aware!

This plant was a dream to grow, wish I'd taken cuts. Halfway through dry at 7 days. Drying at 55 - 60 % RH and 17 - 19 degrees C. I anticipate she'll be done between 10 - 14 days total dry time and I'll then trim and update weights on this Harvest. 133.75g total after trim. She's a nice smoke, very happy.