Likes
Comments
Share
Likes
11
Share
I did a slight defoliation of the skinniest branches, changed up the nutrients a bit, and dropped the light schedule to 12/12 today on 5/31 Canopy is clearly wall to wall, pretty level. May add a second support net during/after stretch. 5/1 noticed a bit of potassium deficiency in some older lower fans, so I added more trio bloom. 5/4 update: The plants are now 33in tall, and showing some N deficiency. My runoff is 1500ppm, which is about double my inflow, so I'm increasing fertigation events, and if that doesn't resolve the issue, I'll be lowing the ppm of my solution.
Likes
5
Share
📆 Semana 7 La Grease Monkey está en modo bestia esta semana. Los cogollos han seguido engordando con fuerza y cada vez se ven más densos y cubiertos de resina. Las flores principales ya empiezan a tener ese aspecto compacto y brillante que promete potencia, mientras que las hojas cercanas están totalmente salpicadas de tricomas, como si las hubieran rociado con azúcar glas. La alimentación sigue basada en XpertNutrients, sin cambios drásticos. Solo he ajustado mínimamente las proporciones para no frenar el ritmo que lleva. El riego sigue afinado al detalle: lo justo para mantener activa la microbiota del sustrato y evitar saturaciones. Los Adlite continúan haciendo un trabajo brutal. La penetración lumínica está ayudando a que incluso los cogollos de las zonas medias e inferiores mantengan una buena densidad. Todo el dosel está funcionando como una unidad, lo que se traduce en una floración muy equilibrada. Las condiciones ambientales siguen bajo control: 22-25 °C de temperatura, y humedad en torno al 55%. Estoy reforzando la ventilación para prevenir cualquier susto ahora que los cogollos empiezan a cerrarse más. El aroma se está volviendo todavía más intenso: una mezcla cremosa, dulce y con ese fondo diésel que le da el toque agresivo típico de esta genética. Los tricomas siguen lechosos en su mayoría, con alguna señal de maduración incipiente, pero aún no es momento de pensar en tijeras. Crecimiento firme, flores con presencia y resina a punta pala… ¡Seguimos creciendo fuerte! 💪
Likes
11
Share
@Tmasm
Follow
Saudações Iniciar diários fast buds Encomenda chegou dentro do prazo, muito discreto. Dia 16/11/2023 Selecção de 5 sepas, colocando em papel toalha Dia 17/11/2023 Colocando em vaso final, com um cúpula para manter umidade alta. Agora é esperar que corra tudo bem Não se esqueça de ver novidades em https://2fast4buds.com
Likes
92
Share
Week 4 Veg Report - TrolMaster Chronicles 🌱 What a week it’s been in the garden! We finally transplanted the Papaya Zoap into its final Autopot, and let me tell you, this plant is something special. Though her roots weren’t quite where I wanted them to be yet, the move was needed to help her catch up with the rest of the crew. She’s already looking fantastic in her new home, and I have no doubt she’s about to explode with growth in the coming days. Sometimes, you just have to trust the process, and I’m feeling like this is one of those moments. It’s almost as if the room itself is taking on a life of its own. 🌿 In fact, I’m starting to believe that what we’re building here is something greater than ourselves—there’s this energy in the room, a feeling of everything coming together perfectly. I can’t wait to see how this journey unfolds! Dialing in the VPD with TrolMaster’s Tech Now, let’s talk VPD (Vapor Pressure Deficit) and how I’ve been keeping everything in check with the Tend-X and the incredible (DSH-2U) Humidity Station. VPD is crucial to plant health—it’s all about finding that perfect balance between humidity and temperature to optimize transpiration and nutrient uptake. The (DSH-2U) Humidity Station, connected directly to my humidifier, has been an absolute game-changer in this regard. With its real-time data and automation, it allows me to monitor and adjust the RH with pinpoint accuracy. Simple yet brilliant, the (DSH-2U) Humidity Station is keeping my room at the sweet spot I need. Whether I’m tweaking the settings from my phone while I’m out and about or just fine-tuning things while relaxing at home, this machine does it all. It’s like having an extra pair of hands in the grow room—and when you’re managing something as complex as VPD, that’s invaluable! And yes, the TM+ Pro App—let’s not forget how awesome it is. I’m adjusting my grow room from the couch, the car, or even the bathroom 😜. I’ve said it before, but this app is making growing easier than ever. Feeding the Girls: The Perfect Blend 🌱 We’ve upped the game by adding CaMg-Boost at 0.25 ml/L to the feeding schedule. Along with the 1 ml/L of the all-in-one liquid, this brings the TDS up to 320 ppm, with a pH of 5.99 and solution temperature of 24.8°C. In the soil, readings are around 415 ppm, with temperatures hovering around 25°C The plants are absolutely thriving, and I can already see the difference this new feed is making. I can’t help but have a bit of fun with this process—it feels like I’m spoiling them with the best of the best. And they’re rewarding me with beautiful growth and vibrant green color. You know how it is, with the right care and attention, these plants are truly becoming a masterpiece in the making. 🌱 Shoutouts 💚 Big shoutout to TrolMaster and ThinkGrow LED for the phenomenal gear that’s making this grow smoother than ever. Also, massive thanks to Aptus Holland for their top-notch nutrition, and of course, to the community here on GrowDiaries—you guys keep the energy alive! 🌱 Last but definitely not least, shoutout to all the seed banks supporting this journey. You’ve been a huge part of this process, and I couldn’t do it without you! Remember, for exclusive behind-the-scenes content and updates in real time, head over to my Instagram and YouTube channels @DogDoctorOfficial. We’ve got tons of epic content lined up, and you won’t want to miss it! P.S. Let’s talk about the new Model One LED Bars—these beauties are not only powerful but super efficient. I’ve been able to dim them down, save on electricity costs, and still maintain an incredible PAR and spectrum. It’s all about fine-tuning the balance of power and performance, and these lights make it easy to get the best results while being eco-friendly. Whether you’re running them full throttle or dialing it back, you’re still getting optimal growth conditions for your plants. That’s the kind of innovation that takes your grow to the next level. 💡 Growers Love to all 🌿💚
Likes
19
Share
Tag 65 Heute wurde sie nun geerntet und sie hat ein Naßgewicht von 389 Gramm Beschert. Jetzt trocknen wir sie und dann sehen wir was am ende überbleibt.
Likes
18
Share
Week 3 Switched from grow to fish mix this week. This week she had a bit of stress with being too close to the light but after moving her down she seemed fine. She’s a resilient girl, I’ve made many mistakes already but she just bounces back. Installation of carbon filter on day 19. Used rain water again this week seems to be no problems so far. A friend told me I need to purchase some calmag and bio heaven. The only two ones I didn’t currently have. I’m getting a little confused with using these organic products I’m used to using Dutch pro chems in the past but I’m sure I’ll get there in the end. There’s just so much to learn.
Likes
17
Share
@P_Silas
Follow
Really loved this. Nothing more to say for now lol, it's been my first grow and grew her with 2 wild dwarfs and loved both, would grow them again. Really excited to try it out.
Likes
2
Share
Im Großen und Ganzen bin ich sehr zufrieden mit dem Grow. Ist die erste erfolgreiche ohne Schimmel Outdoor Ernte. Für mal so nebenbei echt gut geworden! Ich freue mich schon auf das nächste Jahr!
Likes
113
Share
@Skunky
Follow
QUESTION: I've been using a 200W LED which is supposed to replace a 400W HPS. She draws actual 200W. Should I now put the wattage used to 200W or 400W ? ? ? ? ? ------------------------ What started as as a 'just for fun' - project turned out to be my longest going grow ever. I cut her down yesterday when it was still 2017. Today it's 2018! HAPPY NEW YEAR!!! For the ones wondering why it took 27 weeks: I started under a very small 50W bulb as it was only a just fun project so she vegged for ages. She would have been way faster if I grew her under normal conditions ;) The wet weight is 384 with the branches still on like in the hanging pictures. I only cut the bigger fan leaves off. Haven't smoked it yet so I just put it to 50/50 sat/ind -> smoke report to be updated... :) _________ After trimming, cutting and drying I got 54 grams on the scale. Well, I'm a bit dissapointed considering the outcome in grams but I think the quality is quite ok this time. Smoke report to follow soon... ;)
Likes
28
Share
Hey everyone 😃. This week she has done great 👍. It was done again on all the drifted topping and sprayed one last time with neem oil so that the last trips are finally gone 😁. We haven't had any pests for so many years and all of a sudden we have such little shit parts 😅. This week it was poured twice with 1.2 l of water. GHSC enhancer was added during a pouring (1 g per l) The tent was cleaned every day this week and the plants were checked for health. The humidifier is filled once a day. Next week I will decide how I will continue the training because I have space again in the flower tent 😀. This week I'll decide whether it goes straight into the flower tent or is pruned again. Until then, I wish you and your families a good start into the new year 2021 🙏🏻. Stay healthy and let it grow 🍀 You can buy this Strain at : https://www.royalqueenseeds.de/feminisierte-hanfsamen/220-pineapple-kush.html Type: Pineapple Kush ☝️🏼 Genetics: Pineapple x O.G. Kush 👍 Vega lamp: 2 x Todogrow Led Quantum Board 100 W 💡 Bloom Lamp : 2 x Todogrow Led Cxb 3590 COB 3500 K 205W 💡💡☝️🏼 Soil : Canna Coco Professional + ☝️🏼 Fertilizer: Royal Queen Seeds Easy Boost Organic ☝️🏼🌱 Water: Osmosis water mixed with normal water (24 hours stale that the chlorine evaporates) to 0.2 EC. Add Cal / Mag to 0.4 Ec Ph with Organic Ph - to 5.5 - 5.8 .
Likes
9
Share
@Krissci
Follow
Day 7.....loads of head developed Very slow flowering growth but should produce alot of bud Mostly bending fan leaves for light exposure to bud sites
Likes
2
Share
@800peace
Follow
There’s no amber trichomes on Mama Mia and I’m thinking of growing a little longer than the breeder suggests. Northern Lights trichomes are starting to amber and I may harvest earlier than suggested. King Kong trichomes are milky clear. I switched up which light is on which plant. Next grow I’m definitely replacing my two weaker lights with stronger lights and using the weak lights as side lighting. Light power is one of the big lessons from this grow. The bud size looks it’s age, but is much heavier than appearance. I think the kelp helped the buds get denser. The King Kong flowers are all much heavier than the branches can support. Next grow I’ll be more proactive with netting support.
Likes
38
Share
@MrLahey
Follow
So far all is well. Left plant is looking great still. Right plant is still the same as it was, kinda "off." I cut the top off the main cola due to light burn. There's just no way that the plants energy it was directing to it was being used well. I'd rather it go to the rest of the plant because there's just no way that initial top was going to produce anything. It was gnarled. I've also noticed something odd going on with a couple of the buds on the stressed (purple) plant. I posted one of the pics in the pics for this weeks update. Looks kinda like bud rot to me but this is also my first grow so I could be wrong. It looks like it's only affecting the pistils. I may ask a question in the question forum just to be sure. It's odd though because conditions in the tent seem to be too dry maybe for bud rot (averaging in the 50-60% RH range and there is plenty of air circulation in that part of the tent. I'm thinking it could either be the plant negatively reacting to me cutting the main top off the other day or it's just the fact that due to the plant being stressed out for the entire grow that it's lost resistance to things like bud rot, etc.. essentially, I'm not sure at all lol.. Both plants are already showing a good amount of trichome production as the plants have almost switched from stretch flowering phase to pure on flowering/bulking phase. I can't wait to see the buds really start to mature and grow and get stinky. Carbon filter so far is working flawlessly. A week ago I was thinking it wasn't keeping up because when I'd come home from work I could smell pot but it turns out it was just my cannabutter supplies that I left out lol. D'oh. I've also been monitoring conditions in my basement over the past few weeks and have noticed that rain or no rain, the conditions down there are an average 66 degrees and 60-64% RH. With my dehumidifier if the conditions down there remain in that range, I should be able to achieve perfectly optimal drying conditions for when I harvest in 4-6 weeks or so. :) I am having a blast so far and can't wait to harvest and then really apply what I've learned online from youtube, here and reddit combined with my hands on experience from this grow to really fill out the canopy next time and also ensure both plants are the same height for some great yield. I'll probably mainline 2-3 plants for my next grow. I also want to eventually get into building my own soil and amendments but for now I'm just focusing on not learning & applying too many things at once. I just know that at some time I'd like to switch from synthetic nutrients to organic. I'm hooked for life to growing though!
Likes
22
Share
This week marked the transition from stretch into true flower development 🌸 The plant is nearing the end of the stretch phase, with vertical growth slowing down but not completely finished yet. • Height approx. ~100 cm • Stretch almost completed • Canopy remains mostly even after topping Light intensity was increased to ~1000 PPFD ☀️ and the fixture had to be raised slightly again to maintain proper distance as the plant continued to grow. Water demand increased further: • ~4L every 2 days based on pot weight 💧 Feeding this week: • 1x BioTabs Bio PK • Otherwise water + BioBizz CalMag Environment remained stable: • ~25°C temperature • ~50% RH 🌡️ Bud development is now clearly visible across the plant 🌿 Small bud sites are forming and beginning to develop further. Trichome production has started, with visible resin appearing on both the sugar leaves and bud surfaces ✨ Leaf color remains healthy green, though slightly lighter compared to the Chicken n’ Wafflez plants. Aroma is still relatively mild at this stage. Despite being the smallest plant in the tent, the Jelly Donutz shows very strong bud development across the canopy, confirming that the earlier topping paid off 💪🍩 Overall this week marks the end of stretch and the beginning of real bud formation and resin production 🔥
Processing
Likes
4
Share
Still have these ladies in there Solo cups will most likely pot these girls this week Finally moved these ladies over to there pots looking good for now Oh yea no nuts just yet still going with PH bal water
Likes
16
Share
@willertex
Follow
📅 D71 - 10/01 📜 New week. No res change ✍️ 1.5 EC ♒ 5,5 pH 🌊 10 L 📏 90 cm 📅 D74 - 13/01 📜 Res change ✍️ 1.5 EC ♒ 5,5 pH 🌊 10 L 📏 90 cm