Absolutely gutted. So sorry Sssc my pup plucked the damn thing! She was going so well!! I'm starting the other one, Tonight 😁 Win some, loose some ✌️💚

Greetings to any helpful advice

Week 6 of flowering 10/23/24 Changed nutrients to fit week 6 Buds are getting even bigger and thicker. Defoliated a little. Noticed a PH of 4.8 in runoff, same as the late stage of flower in my previous grow. After lowering feed EC, CalMag on max strength, flushing with 0.8ec nutes for 3 days in a row, nothing changed and PH stayed the same. Read in a forum thread about constant low PH in the rootzone when growing in coco. Got great info about CEC, water, nutrients and little chemistry from a detailed explanation. (https://www.icmag.com/threads/recurring-problem-with-low-ph-in-coco.338385/page-2#post-10843765) Flushed plants with tap water + calmag, PH 6.5. Used 120L total for 4 plants in 2 days. 1st day: flushed after lights on, did not water until 2 hours before lights off and flushed again. Runoff PH went up a little, but not to the correct range. 2nd day: flushed after lights on and checked runoff EC + PH, of each plant. Fortunately, PH got corrected to 5.8, and I returned to automatic watering 4 times a day (with 10%-20% runoff). Thoughts: In the last grow, I thought I had a problem because of salts buildup in the media with constantly low PH in late flower. I didn't fully correct the problem till chop day. Same problem here in the same stage of flower without the salt buildup. After reading every forum I could find about the problem, I understood that my bloom nutes were the main problem because of their chemical composition. The coco ability to exchange ions lead to the low PH in the rootzone. It got worse quickly because I did not use any tap water with the feedings, so the PH could swing easily and drastically without resistance. After I looked online for the T.A. feeding chart, I saw they used TriPart Grow till week 7 of flower, the Nitrogen type they are using will up the PH. CocoForCannabis chart that I'm using, has not enough nitrogen to combat the bloom nutes PH down effect in flower. It gets even worse with RO water because there are no minerals that can resist PH down. Now I'm using 30% tap water with rest RO water, T.A. TriPart feeding chart with calmag and silica. Hopefully I have corrected the problem for the rest of the grow. It wasn't easy, because there were lots of variables that worsened the problem quickly. Now I'm checking runoff PH and EC daily. Update on next week :)

Hola a todo el mundo!!!. Esta semana solo regué con agua, ya que he visto las hojas no muy bien. Y mañana ya comienzo con el lavado de raíces. Espero ansioso el corte🤪🤪🤪😅😅😅 Hoy 22/10/25 es el dia 70, mañana comenzare el lavado de raiz.

Week 4 Veg Report - TrolMaster Chronicles 🌱 What a week it’s been in the garden! We finally transplanted the Papaya Zoap into its final Autopot, and let me tell you, this plant is something special. Though her roots weren’t quite where I wanted them to be yet, the move was needed to help her catch up with the rest of the crew. She’s already looking fantastic in her new home, and I have no doubt she’s about to explode with growth in the coming days. Sometimes, you just have to trust the process, and I’m feeling like this is one of those moments. It’s almost as if the room itself is taking on a life of its own. 🌿 In fact, I’m starting to believe that what we’re building here is something greater than ourselves—there’s this energy in the room, a feeling of everything coming together perfectly. I can’t wait to see how this journey unfolds! Dialing in the VPD with TrolMaster’s Tech Now, let’s talk VPD (Vapor Pressure Deficit) and how I’ve been keeping everything in check with the Tend-X and the incredible (DSH-2U) Humidity Station. VPD is crucial to plant health—it’s all about finding that perfect balance between humidity and temperature to optimize transpiration and nutrient uptake. The (DSH-2U) Humidity Station, connected directly to my humidifier, has been an absolute game-changer in this regard. With its real-time data and automation, it allows me to monitor and adjust the RH with pinpoint accuracy. Simple yet brilliant, the (DSH-2U) Humidity Station is keeping my room at the sweet spot I need. Whether I’m tweaking the settings from my phone while I’m out and about or just fine-tuning things while relaxing at home, this machine does it all. It’s like having an extra pair of hands in the grow room—and when you’re managing something as complex as VPD, that’s invaluable! And yes, the TM+ Pro App—let’s not forget how awesome it is. I’m adjusting my grow room from the couch, the car, or even the bathroom 😜. I’ve said it before, but this app is making growing easier than ever. Feeding the Girls: The Perfect Blend 🌱 We’ve upped the game by adding CaMg-Boost at 0.25 ml/L to the feeding schedule. Along with the 1 ml/L of the all-in-one liquid, this brings the TDS up to 320 ppm, with a pH of 5.99 and solution temperature of 24.8°C. In the soil, readings are around 415 ppm, with temperatures hovering around 25°C The plants are absolutely thriving, and I can already see the difference this new feed is making. I can’t help but have a bit of fun with this process—it feels like I’m spoiling them with the best of the best. And they’re rewarding me with beautiful growth and vibrant green color. You know how it is, with the right care and attention, these plants are truly becoming a masterpiece in the making. 🌱 Shoutouts 💚 Big shoutout to TrolMaster and ThinkGrow LED for the phenomenal gear that’s making this grow smoother than ever. Also, massive thanks to Aptus Holland for their top-notch nutrition, and of course, to the community here on GrowDiaries—you guys keep the energy alive! 🌱 Last but definitely not least, shoutout to all the seed banks supporting this journey. You’ve been a huge part of this process, and I couldn’t do it without you! Remember, for exclusive behind-the-scenes content and updates in real time, head over to my Instagram and YouTube channels @DogDoctorOfficial. We’ve got tons of epic content lined up, and you won’t want to miss it! P.S. Let’s talk about the new Model One LED Bars—these beauties are not only powerful but super efficient. I’ve been able to dim them down, save on electricity costs, and still maintain an incredible PAR and spectrum. It’s all about fine-tuning the balance of power and performance, and these lights make it easy to get the best results while being eco-friendly. Whether you’re running them full throttle or dialing it back, you’re still getting optimal growth conditions for your plants. That’s the kind of innovation that takes your grow to the next level. 💡 Growers Love to all 🌿💚

They popped up 2nd of January after germination. Biobizz soils mixed just using oxy plus for first couple of weeks as well as silicone

Week 3 = Defoliation!

Week3 of Flower day 21

Day 1 of Veg!: Both plants have shed their seeds and are turning towards the light. I was a little concerned with how they looked at first, very white, but I didn’t notice they broke ground for about 24hrs and the lights were off. They’ve got lots of color now! Day 3:These 2 are coming along awesome! Almost have the blumat system perfectly, soil is staying perfectly moist and the girls are loving it. Added a air stone to the reservoir of the Blumat System to ad oxygen and move the water around. Day 5: Plants are doing great. Steady growth right now. Still adjusting the blumat watering system to get it just right, but I’m almost there! It’s getting a little hotter during the day. In the high 70’s, but I’m okay with that for now. Lights are now at 75% Day 7: So my other seed never germinated. Put a new one in paper towel to see if it will go. Only problem is it will be 2 weeks behind by the time it comes up. I was really hoping to get a flat canopy all the way across the room, but who knows, may still be possible! Plants are loving the Gaia Green Living Soil mix, and today I just moved the blumat sensors to get a bit closer to the rootball.

Bienvenidos cultivadores de marihuana clandestinos, y también, a los que tienen la fortuna de no serlo!🖐️👨‍🌾 Novena semana de floración para esta planta cultivada en una tierra que no es mía ni tuya, es tierra de nadie, y a nadie le debe nada. Jelly Bananen está dispuesta a darlo todo, tuvo 3 semanas de bloqueo cuando la pasé a floración, ahora ella se resarce y recupera el tiempo perdido, agranda sus bellas colas día a día, se resiste a envejecer, porque aun tiene cosas por hacer y mostrar. Aromas embriagantes lo inundan todo... gran cepa! Hasta la próxima... SALUDOS A TODOS!! ================================= Info de la cepa Jelly Bananen: https://en.seedfinder.eu/strain-info/Jelly_Bananen/Exotic_Seed/ - Genética: Strawberry Banana x Hippie OG (Selección OG Kush) - Madura tras unas 9 semanas de floración. - Floración Interior: 60-65 días. - Su efecto es muy fuerte, completamente indico. ==============

June 13th - Day 22; fed 1L yesterday 16th - fed a full meal; 1L - extended another section of LST. It can now grow as it wants 17th - taking some urgent action because of an ailment that had fallen on Californian Snow, that now seems to be affecting Zamaldelica. After being fed yesterday, Cali Snow had all of her Fan Leaves wilt and dissolve sort of, within 4 hours. She was flushed and it seems a Low pH was the final element to clear from the run-off. This morning Zamaldelica fan leaves are sporting Orange Spots. I’m throwing 6 gallons of pH’d water (6.5) through the substrate right now thanks… ! - looking to put some of the blame on me, for allowing these plastic pots, with limited holes, to be the final resting place for these gems… should have AT LEAST been into Fabric or Smart Pots DoH. When I picked them up yesterday, that container was physically Hot. Not dry, but man the soil portion was warm. - glad I flushed, did not see this one coming. Sure, it was a Heat Warning, weather system, but things did not dry-out. - also moving Zamaldelica into a 5 gal fabric pot. Last soil in the house, kinda worked perfectly. Sorry Californian Snow, maybe too far gone. Something became acidic in the substrate after the volume of that meal, reached the lower levels, and an accumulation of Nutes/additives. It reacted - I knocked off any loose soil from the original Pot/rootball and put 60% of the plants core into a DynoMyco laced 6gal bag. - caption for the video; been one of those days…

SOME SEEDS ARE STARTING TO POP OPEN AFTER 1.5 DAYS SO I WILL PROBABLY BE PUTTING MOST OF THEM IN THE SOIL ON APRIL 23RD👍 FOR EVERYTHING MARS HYDRO VISIT: www.mars-hydro.com www.marshydroled.ca PROMO CODE: rocknroll VISIT THE ALIEXPRESS STORE: @marshydro_aliexpress Instagram: @marshydropenny Thanks for taking the time to read and check out my diary🤜🤛 TS3000 FEATURES: WIDEBAND SUNLIGHT FULL SPECTRUM LED GROW, Infinite close to natural sun light, suit for all plants whole stages indoor growing, rapid plant response from seed to flower, achieve maximum quality and quantity, much better than traditional HPS grow systems. HIGH REFLECTIVE & NOISE FREE-Fanless LIGHT BOARDS design will make your growing life easy and quiet, quickly heat dispersing material aluminum reducing light lost to aisles and walls, increase the light intensity up to 20%, allowing your plants receive more energy and without burning your plants for maximum headroom. HIGH EFFICIENCY ENERGY SAVING PLANT LIGHT, high-power NEW LED grow, Compares to traditional 3000 watt HPS lamp and other brand led grow light while only 450 watts true output with 1016 LEDs, more scientifically and energy-efficient! Perfect for 5' x 5' veg stage, 4' x 4' bloom stage, higher intensity in a MARS HYDRO grow tent, reflective area, or by crossing over using multiple TS3000. BOOM YIELD LARGE GROW LIGHT, NEWEST SMD LED technology provide highest PAR/LUMEN output(1095.6umol/), makes you get 30% higher yield compare OLD led lights, can get max yield at 2.5g/watt, less pay but get more yield, bring a amazing grow trip to any home grower as it beams huge amounts of light energy to plants below. COMMERCIAL LED GROW LIGHT, Updated easy dimming & daisy chain function, main light controlled, especially come with two waterproof and dimmable Mean Well Drivers, auto sensing power supply works on both 120VAC and 240VAC and 277VAC, suit for Large Rooms and Commercial Setups. Low Energy-Consuming LED Grow Light: Consuming 300w and also mounted with 1016 chips, TS3000 has the ability to replace a 450w HPS light while reducing 40% power intake. High Efficiency LED Grow Light: With overall light output PPF 343umol/S as well as amazing PPE 2.3 umol/j, it's 50% even more photon efficient and can assure a 30% more return than the old HPS/MH lights. Patent Highly-Reflective Hood Shape: The reflector design on TS3000 is patented, which can effectively gather the light dispersed in all directions to enhance its light intensity as well as assist plants in absorbing more light. Full Spectrum Plants Favorite Spectra: By the unique mix of spectra that makes most light in the 400-700nm waveband, incredibly conducive to plant photosynthesis. Adequate IR(730-740nm) is additionally consisted of in the range to generate larger buds. Dimming And Daisy Chain Feature Available: Upon an independent dimming button on the external driver, backing 0-100% settings adaptation and up to 30 LEDs daisy-chained in a group, it supplies different light levels for various plant stages meanwhile saving energy. Safety Certifications And Service Warranty: CE, ETL, RoHS, UKCA security certifications accepted, 50,000 hours durability, 5-year service warranty, and local after-sales repair 5x5 GROW TENT: LOCK ALL LIGHT INSIDE MARS HYDRO Indoor Grow Tent interior is made of diamond mylar which is highly reflective. (Other brand's mylar and reflective rate is as low as 50%, won't provide efficient light. )MARS HYDRO 1680D canvas, being double stitched, it is tear proof and has perfect light locking. Mars Hydro's grow tent keeps 100% lighting beams inside and helps your plant absorb more lights. EXTRA-THICK --No light leaks or rips at all DURABILITY GROW TENT Stable metal corner adapters and poles are the trustful supporters of the tent, standing sturdy, neither rusting nor paint-falling, quick easy tool-free installation. Mars Hydro's heavy-duty metal zippers, with double layer black lining, are the best on the market which create a light-proof seal EASY OBSERVATION FOR YOUR PLANTS. Special observation windows are made by double layers of cloth. Observe the growing conditions of your plants without opening the tent and avoid disturbing plants. The observation window also serves to dissipate heat and ventilate air AUTOMATIC 6 INCH EXHAUST FAN KIT W/ CONTROLLER: Mars Hydro 6'' Inline Fan uses a mixed-flow design to maintain peak performance in a high static pressure environment. GROW TENT FAN: MARS HYDRO inline fans are designed to ventilate hydroponic grow rooms, transfer heating/cooling, cool AV closets, and exhaust odors. EFFECTIVE VENTILATION: Variable speed controller for easy fan speed adjustment. Optimal ventilation for your planting. LOW NOISE LEVEL: Durable plastic fan housing and blades for extremely low noise(32dB-A); create a truly quiet growth environment. EASY INSTALLATION: Removable duct ends with locking tabs for quick removal and easy maintenance and a cord length of 4.9 feet for hassle-free setup. This grows tent fan with a controller for easy fan speed adjustment. BASIC PARAMETERS: Ventilation exhaust fan size: 6” | Dimensions: 315mm*225mm*210mm. | Weight: 2.7. | Airflow: 402CFM | Noise: 32dB-A | Bearings: Dual Ball. 

Last final defoliation done, now buds are fully exposed to the lights and the best part, harvest trim will be easier. Still it took me around 8 h altogether to defoliate all of them. Tones of buds and frost , amazing smells. Won't rush will give it a bit more to swell.

Hello everyone, people! My dark phoenix amazes me with its beauty! she feels great .. Organic fertilizer does its job! by all indications, it is clear that the plant is 100% healthy and a healthy plant will give a high-quality harvest! I'm sure of it! the potential is already visible.

💐🌟HESI contest🌟💐 💮 22.3... 💮 23.3... 💮 24.3... 💮 25.3 the updates are failing due to problems with the quarantine situation, but everything is stabilizing and I can slowly resume with the updates. the plants are growing less, the no hesi plant is smaller and seems to bloom more slowly. I wait for them to start scenting to see if to save some clones: D 💮 26.3 💮 27.3 💮 28.3 ____________________________________________________________________________________ ❕❗❕ Do you already know HESI products? Take a look at the details You will be fully satisfied 😉 👀 https://www.hesi.nl/en/products 📜 A look at the details of what I'm growing 📜 🍓🍌🍇Strawberry Banana Grape by Seedsman🍇🍌🍓 ⚧ Gender ▪️ Feminised ➰ Genes mS 🎄 Genetics ▪️ Strawberry x Grape x Banana OG 🚜Harvest ▪️ 400 - 500 g / m² 🌷Flowering ▪️ 60 - 65 days ✨THC ▪️ 15.0-20.0% ✅CBD ▪️ 1.0% 🏡Room Type ▪️ Indoor 🌄Room Type ▪️ Outdoor 🕋Room Type ▪️ N/D 🎂Release Year ▪️ 2019 __________________________________________________________________________ 📷🥇 Follow the best photos on instagram 🥇📷 https://www.instagram.com/dreamit420/ 🔻🔻Leave a comment with your opinions if you pass by here🔻🔻 🤟🤗💚Thanks and Enjoy growth 💚🤗🤟

Last week i found some seeds grown in the bids and i released them. Was a bit of work but i think its worth it. I start to give just water for both kush, the haze will get 2 weeks nutrients. Hope that come more seeds. Have a nice week✌️