Likes
Comments
Share
This week I topped each main cola at the 3rd node as usual and performed a selective defoliation to improve light penetration and airflow. From now on, I won’t be doing any more apical cuts. In a few days, I plan to introduce a scrog net to start guiding the branches and prepare for an even canopy 🌿💪
Processing
Likes
27
Share
Wow , week 1 bloom of my first grow , and Legal grow . Finally seeing buds has reinvigorated me lol i vegged these gals a full 8 weeks and the nodes per plant are over a dozen right now , lil buds are growing nicely even considering i have defoliated each plant once this week with a few additional handfuls of leafs here and there . Started with bud ignitor hopefully that is helping and we will see by end of week 2 😁😁 also i took down my scrog , i just wasnt able to to get into each plant and defoliate as needed with the scrog present . Next time i will scrog alot earlier during veg . Thanks for checking out my grow , if you have any tips or tricks for a rookie im all ears
Likes
2
Share
@TTerpz
Follow
Start of week 9 4/9/25 4/10/25: was fed with the nutrient dosage above 4/12/25 : watered with plain ph’d water
Likes
184
Share
#seedsman420growoff and #SeedsmanSeeds 📆 Week 2, 4-10 May 2024 4-9 May - Observed and let the seedling grow. 10 May - Removed first two branches from seedling (see video). 📑 The seedling is growing as expected, and showing no problems. It has always been a practice to remove the two branches from the first true leaf nodes, because they rarely are able to keep up with the plants growth, and just suck energy basically. The rest of the week was making only minor PH adjustments as needed to maintain the desired level of 6.2 🍶 4 May no nutrient solution change, 1st change will be week 3 🍽️ 4 May feeding schedule unchanged 💧 Using reverse osmosis water with EC/TDS at 0 🐉 Nutrient Solution EC 1.0 at 70 degree F 🔆 Light power at 50%, DLI 13 canopy coverage at 18hrs 😤 Using General Hydroponics, HGC728040, Dual Diaphragm Air Pump, 320 GPH That is it for this week. Thanks for the look, read and stopping by.
Likes
16
Share
@NMGDOC
Follow
Para el riego: 💚3ml/lt Snoop's Premium Nutrients Grow 💚1ml/lt Pure zym 💚0,1ml/lt Raimil Riego de 1,5lt por planta aprox o hasta lograr un run off del 10% aprox. No tengo calendario para los riegos, volveré a regarlas cuando vea el coco algo seco por arriba. El led de todogrowled se puede regular, así que mientras están tan pequeñas están a 150w. La siguiente semana subiremos a los 220w. Y probablemente en las floración agreguemos el TGL 60 para dar más potencia. Iré subiendo fotos del avance de esta semana, si tienes alguna sugerencia, no dudes en hacerlo 💚 aún soy una novata jaja esta es la segunda vez que planto
Processing
Likes
12
Share
@GrowGuy97
Follow
Have seen a lot of good diary’s on these had to get some for myself to see how it goes! Hopefully we get some super purple buds! Stay tuned & happy growing friends!🤙🏼✌️🏼🌱 Day 1 - Finally got them planted & water with fox farm big bloom (6tsp per gal) Day 2 - all 5 have sprouted & doing great! Day 3 - 2 out of 5 seeds have fallen off but they are all still growing & looking good! Watered them a little more this morning👍🏼 Day 4 - Looking great🙏🏼 Day 5 - Grow babies Grow!! Day 6 - Plain PH water 6.4
Likes
29
Share
So week 4 of flower has come to an end. I have finally started feeding full nutes with 50% N this morning. Plants seem to be handling it well. The double cola Malasaña in the back has an amazing bud structure, and such a heavy resin production on her, I really wish I had cloned her. I include 3 pictures of that one. Also, I tied down a bunch of taller colas so I could turn up my light to 100% with an even canopy. Buds have not been swelling much this week ! But with the reintroduction of feeding at a regular level I hope to see lots of progress in the coming weeks . Also I noticed substantially heavier trichome production on the plants nearest the UV light, might just be coincidence though. Well have to see the outcome of future grows during a monocrop .
Likes
27
Share
Today I changed the timer to 12/12. Lets get to flowering!!!🎉 The plants really filled up the growing space nicely. I'm really excited to see how much they will stretch in the first few weeks🤩
Likes
35
Share
Likes
6
Share
@Kannamar
Follow
Well that was a special day, it always make me sad in a way, but this time, I enjoyed the moment a lot. As I wrote in a reply to a comment, things can always be better, and they are with good decisions at the right time. These are the smallest and the biggesr plant, one seed didn't germenated and that's why I had to put a Red Gorilla. Not sure I will try a main mlinning on auto flowering strains any more.... but I think I did it wrong, first I took the one that seemed less strong for the experiment, and having 2 other plants to compete for lights. FIM is definetly a technique I will reuse if needed. It's so nice to have these genetic contrasts, colors, aromas, shapes. Many thanks for all the help you gave, precious. 19/04/2024 lower popcorn buds seems dried already! But still branches don't crack on bends. Will check again on Monday. I finally have received, lately a portable microscope, will be more ususeful next year! But this confirms that lower buds might have need more maturity but did the choice to not over complicate by harvesting in 2 times, my indoor tent is also my drying tent, and I wouldn't have any other place to dry the upper buds separetly while allowing the remaining to harvvest with more maturity. In general I think I might have began the Final part too early. BTW, we smoked the popcorn bud, and it's very promissing, we liked it.
Likes
40
Share
Hi all! oh yeah baby! burst of color! I can’t stop looking! I really like varieties that change their color. but I haven’t had such experience yet. usually buds change color and not leaves. but this is an exceptional case! I really like it externally. and the smell is just as sweet and delicious as otd! I regret that I did not let her grow more in the growing season. it would make a huge beautiful bush!
Likes
11
Share
Hallo zusammen 🤙. Sie wächst sehr schön und macht keine Umstände.
Likes
21
Share
Just gave her a bikini waxing AKA lollipop I'm trying a lot of techniques that I've never tried before this one
Likes
142
Share
Hi everyone 🤗. The tent bursts at the seams 😍. The buds are getting bigger and bigger :-). The blue chesse pheno 1 is harvested this week 😎. next week both Tangie Kosher Kush will be harvested :-) everyone else needs something 😊. I wish you all a nice week, stay healthy 🙏🏻 and let it grow 🌱
Likes
4
Share
Likes
2
Share
Lámpara: Bestva Quantum Board LED LM301B Sustrato: 2 Jiffy fino : 1 Floragard Especies: Charlotte Dream CBD - Auto Dark Purple - Purple Kush - Triping 25 - Gelato Ice Acontecimientos : 1. Las automáticas que me enviaron de regalía empezaron a florar muy pronto y van a dar muy poca producción. No vuelvo a poner automáticas gratis en mis indoor. 2. Las Charlotte Dream han crecido de forma brutal comparadas con las demás. 3. Se está empezando a hacer LST a algunas de las plantas, otras se quedaron al natural. 4. Luz 20h/día, nutriente y viento. Buenos humos
Likes
3
Share
After getting over the loss of Cookie I push forward . I took care of the overwatering issue by using the AC infinity wick auto water system, So far it's doing great.
Likes
116
Share
~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_ 10/21/20 😻 We're documenting a day early because we'll be gone for a weekend camping trip...The plants are progressing beautifully and perpetually praying, they're absolutely loving this new MarsHydro! We decided to move the light from 24" to 30" to try widening the nodes a little before dropping back to 24", we're in unamended Promix so we typically start thinking about feed this week but being autos we're going to take it slow and wait on color ques before making that move (probably next week for sure)...thanks for reading and happy harvests everyone!! ❤️💡🌱😽💨 ~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~ 10/25/21 😺 We gave all plants a very, very light feeding (<3ml/gal) to see how they tolerate it, its super early but a few were already beginning to wash out ..We started bending plants today, low stress only for these girl and everything looks great so far! This MarsHydro is intense, the node spacing is extremely tight on all plants and growth has been really steady (especially these last few days), we couldn't be happier! Thanks for reading and love all around growmies!! 😻 ❤️💡🌱.. ⚡Mars Hydro/SP-3000⚡ Specifications ⚙️: Diodes: Samsung LM301B / Osram 660nm (960 total!) Driver: Meanwell 300watt 🔌 (300W±5% @AC120V-277V) PPF: 824umol/S ☢️ PPE: 2.8 µmol/j 〰️〰️ Lifespan: >50k hrs ⌛ Veg Coverage: 3 x 5 ft 🌱 Flowering Coverage: 2 x 4 ft 🌼 Weight: 10.1 lbs (4.6kg) -The SP-3000 uses an aluminum heatsink (no fan) and the driver can be placed outside the tent 🌡️⬇️ -IP65 waterproof ratings, tolerant to high humidity grow environments 💦 .. -Up to 30 of these lights can be daisy-chained together and all controlled from a single light! 💡~💡~💡~💡~💡 ~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_