Started the flush a few days ago. Wish I had set up a second scrog. The branches are falling over under their own weight - hence the makeshift netting.

~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_ ❤️💡🌱😽💨 Start of week 2!! All 4 P.G.Cs to be a little slow growing out of the gate but are they're all of equal size...we dropped the SP-3000 a few more inches to combat stretch.. It been an easy seedling week lol..not too much to report..Thanks for doping by and happy harvests everyone!!! 😺🌱 ⚡Mars Hydro/SP-3000⚡ Specifications ⚙️: Diodes: Samsung LM301B / Osram 660nm (960 total!) Driver: Meanwell 300watt 🔌 (300W±5% @AC120V-277V) PPF: 824umol/S ☢️ PPE: 2.8 µmol/j 〰️〰️ Lifespan: 50k+ hrs ⌛ Weight: 10.1 lbs (4.6kg) Veg Coverage: 3 x 5 ft 🌱 Flowering Coverage: 2 x 4 ft 🌼 -The SP-3000 uses an aluminum heatsink (no fan) and the driver can be placed outside the tent 🌡️⬇️ -IP65 waterproof ratings, tolerant to high humidity grow environments 💦 .. -Up to 15 can be daisy-chained together and all controlled from a single light! 💡~💡~💡~💡~💡 ~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_ 7/28 🎈🎈 **** HAPPY DAYS!!! **** 🎈🎈 We just ordered the FC-E6500 by @MarsHydro for our 4x4!! Soooo exciting!! For the first time ever we'll be 100% LED!! 💪😺 ~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_

Looks like close to the end with these 3 that are left standing. They are all still drinking it up, so I'm still pumping the nutes through them. One has some pretty heavy nugs and has the serious lean going. The tallest one of course. Just looking at them, the one that came down already was almost 2 oz. I'm guessing about another 3-4 oz to come out of the remaining 3. It's some heavy, greasy, dripping with trichs kinda weed. Perfect.

In Woche 9 Netz in 1m2 growbox gespannt. Beginn von LST durch anpassen an das Netz um die Pflanzenoberfläche zu vergrößern. Einige größere ‚Fanleaves‘ entfernt

All the photos are in the 8x8 now just a few autos in here now FOR EVERYTHING MARS HYDRO VISIT: www.mars-hydro.com www.marshydroled.ca PROMO CODE: rocknroll VISIT THE ALIEXPRESS STORE: @marshydro_aliexpress Instagram: @marshydropenny Thanks for taking the time to read and check out my diary🤜🤛 TS3000 FEATURES: WIDEBAND SUNLIGHT FULL SPECTRUM LED GROW, Infinite close to natural sun light, suit for all plants whole stages indoor growing, rapid plant response from seed to flower, achieve maximum quality and quantity, much better than traditional HPS grow systems. HIGH REFLECTIVE & NOISE FREE-Fanless LIGHT BOARDS design will make your growing life easy and quiet, quickly heat dispersing material aluminum reducing light lost to aisles and walls, increase the light intensity up to 20%, allowing your plants receive more energy and without burning your plants for maximum headroom. HIGH EFFICIENCY ENERGY SAVING PLANT LIGHT, high-power NEW LED grow, Compares to traditional 3000 watt HPS lamp and other brand led grow light while only 450 watts true output with 1016 LEDs, more scientifically and energy-efficient! Perfect for 5' x 5' veg stage, 4' x 4' bloom stage, higher intensity in a MARS HYDRO grow tent, reflective area, or by crossing over using multiple TS3000. BOOM YIELD LARGE GROW LIGHT, NEWEST SMD LED technology provide highest PAR/LUMEN output(1095.6umol/), makes you get 30% higher yield compare OLD led lights, can get max yield at 2.5g/watt, less pay but get more yield, bring a amazing grow trip to any home grower as it beams huge amounts of light energy to plants below. COMMERCIAL LED GROW LIGHT, Updated easy dimming & daisy chain function, main light controlled, especially come with two waterproof and dimmable Mean Well Drivers, auto sensing power supply works on both 120VAC and 240VAC and 277VAC, suit for Large Rooms and Commercial Setups. Low Energy-Consuming LED Grow Light: Consuming 300w and also mounted with 1016 chips, TS3000 has the ability to replace a 450w HPS light while reducing 40% power intake. High Efficiency LED Grow Light: With overall light output PPF 343umol/S as well as amazing PPE 2.3 umol/j, it's 50% even more photon efficient and can assure a 30% more return than the old HPS/MH lights. Patent Highly-Reflective Hood Shape: The reflector design on TS3000 is patented, which can effectively gather the light dispersed in all directions to enhance its light intensity as well as assist plants in absorbing more light. Full Spectrum Plants Favorite Spectra: By the unique mix of spectra that makes most light in the 400-700nm waveband, incredibly conducive to plant photosynthesis. Adequate IR(730-740nm) is additionally consisted of in the range to generate larger buds. Dimming And Daisy Chain Feature Available: Upon an independent dimming button on the external driver, backing 0-100% settings adaptation and up to 30 LEDs daisy-chained in a group, it supplies different light levels for various plant stages meanwhile saving energy. Safety Certifications And Service Warranty: CE, ETL, RoHS, UKCA security certifications accepted, 50,000 hours durability, 5-year service warranty, and local after-sales repair 5x5 GROW TENT: LOCK ALL LIGHT INSIDE MARS HYDRO Indoor Grow Tent interior is made of diamond mylar which is highly reflective. (Other brand's mylar and reflective rate is as low as 50%, won't provide efficient light. )MARS HYDRO 1680D canvas, being double stitched, it is tear proof and has perfect light locking. Mars Hydro's grow tent keeps 100% lighting beams inside and helps your plant absorb more lights. EXTRA-THICK --No light leaks or rips at all DURABILITY GROW TENT Stable metal corner adapters and poles are the trustful supporters of the tent, standing sturdy, neither rusting nor paint-falling, quick easy tool-free installation. Mars Hydro's heavy-duty metal zippers, with double layer black lining, are the best on the market which create a light-proof seal EASY OBSERVATION FOR YOUR PLANTS. Special observation windows are made by double layers of cloth. Observe the growing conditions of your plants without opening the tent and avoid disturbing plants. The observation window also serves to dissipate heat and ventilate air AUTOMATIC 6 INCH EXHAUST FAN KIT W/ CONTROLLER: Mars Hydro 6'' Inline Fan uses a mixed-flow design to maintain peak performance in a high static pressure environment. GROW TENT FAN: MARS HYDRO inline fans are designed to ventilate hydroponic grow rooms, transfer heating/cooling, cool AV closets, and exhaust odors. EFFECTIVE VENTILATION: Variable speed controller for easy fan speed adjustment. Optimal ventilation for your planting. LOW NOISE LEVEL: Durable plastic fan housing and blades for extremely low noise(32dB-A); create a truly quiet growth environment. EASY INSTALLATION: Removable duct ends with locking tabs for quick removal and easy maintenance and a cord length of 4.9 feet for hassle-free setup. This grows tent fan with a controller for easy fan speed adjustment. BASIC PARAMETERS: Ventilation exhaust fan size: 6” | Dimensions: 315mm*225mm*210mm. | Weight: 2.7. | Airflow: 402CFM | Noise: 32dB-A | Bearings: Dual Ball. 

🌱 Day 57 - Start of the Second-to-Last Flowering Week 🌱 Hello, Grow Friends! Today marks the start of the second-to-last flowering week—Week 9 overall, and Week 5 of flowering. 🌿 I’m getting more and more excited as my first grow nears its end. As I approach harvest, I’ve decided, based on my research, to stop feeding nutrients and stick to just pH-adjusted water for the final two weeks. 💧⚖️ Watering Routine: I’ll keep the same watering schedule—1 liter every two days, which is about 10% of the pot volume. 🌱💧 This should be enough to flush out the remaining nutrients, ensuring a clean finish for the plant. Temperature & Humidity: The temperature remains stable between 19-23°C, which I believe is ideal for this stage of the grow. 🌡️🍂 No more high temperatures to worry about! The humidity is fluctuating between 45-58%, and I’m keeping a close eye on it to stay below 60%. 💧🔍 Everything seems on track for now. 🌿 Plant Health & Growth: The plant still looks very healthy overall. 🌱💪 However, I’ve noticed that in the past three days, there haven’t been any visible changes in the size of the buds. 🤔 It could just be that I’m not seeing the growth clearly, but the only noticeable change is the daily opening of new flower calyxes. 🌸 Harvest Preparation: I’m already getting my equipment ready for drying after harvest. 🛠️ Once it’s time to cut, I’ll be hanging the plant to dry for the first 10 days. 🌿✂️ I want to make sure everything is set for a smooth drying process. Stay tuned for more updates, and as always, daily photos of the plant will be posted! 📸🌱

Hey everyone 🤗. A lot has happened this week ☺️. Not surprised that the plants look so extremely dark, is that because I sprayed them with neem oil as a preventive measure , because I discovered a very young trip on a plant. This annoys me extremely, because the attachment room is very clean and neither shoes nor dirty clothes come in when you enter the room 😩. But since I had the problem in most cases years ago, I am very confident that I will get the problem under control very quickly 😃. Otherwise, everything is developing very well as usual 👌. I wish you a lot of fun with the new update, stay healthy 🙏🏻 and let it grow 😃. You can buy this Strain at : https://sweetseeds.es/de/cream-caramel/ Type: Cream Caramel ☝️🏼 Genetics: Blue Black x Maple Leaf Indica x White Rhino 👍 Vega lamp: 2 x Todogrow Led Quantum Board 100 W 💡 Bloom Lamp : 2 x Todogrow Led Cxb 3590 COB 3500 K 205W 💡💡☝️🏼 Soil : Canna Coco Professional + ☝️🏼 Fertilizer: Green House Powder Feeding ☝️🏼🌱 Water: Osmosis water mixed with normal water (24 hours stale that the chlorine evaporates) to 0.2 EC. Add Cal / Mag to 0.4 Ec Ph with Organic Ph - to 5.5 - 5.8 .

Still doing the balancing act with these autos. Trying to learn as much from my mistakes as a can. For now, the preliminary conclusion is that for my circumstance I need at least 20-liter bags. This is to make sure I don't dry out the grow bags too soon, also I didn't add hydro corn this grow, which I'm going to add next time. Also, they deal better with higher temps so it seems and have more buffering and balancing effects with my type of super soil. Still very happy with how the tent filled with only 4 autos I see that 5 or 6 of this size would've worked. The SP-3000 still working like a charm. Check out the discounts on: www.mars-hydro.com Thank you for checking my grow and hopefully yours are going great! Hug Bud

Boas growmies! Penso que a royal gorilla #1 quando completar 10 semanas posso começar o flush. 10/08/2021 - O gráfico representa a nutrição misturada em 2,5L de água da Royal Gorilla 1. EC = 1,32; pH 6,2 ;10/08/2021 - Alimentaçao das Royal Cheeses (4L): CE = 1,34mS; pH 6,2 -BioGrow - 7ml; BioBloom - 5,5ml; TopMax - 5ml; BioHeaven - 6,5ml; Activera - 6,5ml; Calmag - 1,5 ml Alimentação Royal Gorilla2 (2L): CE = 0,67mS; pH 6,4 - BioGrow - 0,5ml; BioBloom - 3,5ml; TopMax - 12ml; BioHeaven - 1,5ml; Activera - 3ml; Calmag - 1ml; Reduzi o nitrogenio (biogrow e bioheaven) porque as folhas parecem muito verde-escuro. --------------------------------------------------------------------------------------------------------------------- 13/08 - Alimentaçao da Royal Gorilla #1(2,5L): CE = 1,37mS; pH 6,1 -BioGrow - 3,5ml; BioBloom - 5ml; TopMax - 3ml; BioHeaven - 6ml; Activera - 5,5ml; Calmag - 1 ml; 13/08 - Alimentaçao das Royal Cheeses (4L): CE = 1,33mS; pH 6,3 -BioGrow - 8ml; BioBloom - 7ml; TopMax - 5ml; BioHeaven - 8,5ml; Activera - 9ml; Calmag - 2 ml; Alimentação Royal Gorilla2 (2L): CE = 0,70mS; pH 6,1 - BioGrow - 0,5ml; BioBloom - 4ml; TopMax - 2ml; BioHeaven - 5ml; Activera - 4,5ml; Calmag - 1,5ml;

Día 78:

flowers

Update to fo

This is the end of the 6th week. (Thats a little japanese bonsai in with it) Feeling like it isnt coming along as well as it should be.. Its fanning out like mad, but not growing up, stayed the same height for the week. I shifted it into a pot that wasnt clear as suggested and topped it and snipped a few other buts underneath off. Also my light arrived which is currently on 80% and at height of 450mm/45cm/17.7 inches My nutrients n shit haven't arrived yet, been waiting on those for a week thanks to a postal strike. So I had tiny barely visible bugs, which seem to have disappeared, not under leaves or crawling around anymore. Would they be what has caused my spots and drooping/clawing? Or is it simple because of my light, lack of food, too much water? Very much need some help with this.

Now starts the waiting game😑

24th - start of week 3. No water today as I watered yesterday. Added a fan to the tent. Happy Christmas Eve!! 27th - watered around 500ml. Happy growing 29th - growing well new growth looks fine in comparison to the first leaves that came out. Can see a difference between days 🍃 🍃

Today I spread eggshells and baking soda on the surface of the floor. I watered until wastewater came out and then immediately measured the pH. #1 drain ph 6.5 #2 drain ph 7 for both looking so sick, the pistils extremely large and resinous🤩 (Day 58) The baking powder probably didn't do them any good.But they look very good and are covered in trichomes.Even the stems where the buds begin are covered with trichomes. (Day 60) Watered 2500ml water and removed some dying leaves.(Day 62)

Flowering is coming along well.. each plant is starting to show signs of frosty fan leaves and the bud sites are starting to swell. I also took a video of both