Tag 55: Ich gebe kein Dünger mehr in das Gießwasser. Bald wird geerntet 😃

did a bit defoliation again and gave water with magenesium and aloe vera powder. I ordered FHM Fulvic & Humid Acid + Trace Minerals. Will use it the next week as topdress. I can smell some cherry terps already. Smells really nice :)

6/19/2024 These are going to be My next run. Excited Transplanted into 1 gal and added (too) much myko powder. 6/23 she completely drooped and is showing signs of stress or shock. 6/25bent her in half. She was starting to harden off(up?) But I wasn't sure what I wanted to do with her yet. I knew I was going to train or top or something. She wouldn't become much more than a single cola and a handful of buds(I assume). Either way I can shape her up as we go. 🙈🙉🙊 6/24/24 applied veg nutes. Terp tea grow 711. A single tsp or 5 ml per gallon of substrate. I need to remember to add uprising foundation as well

This plant has too much growth that has never seen the light! Did a couple mild rounds of defoliating and some LST to pull the canopy wider. The first trained branches from ealier in the week look GREAT, so i'm hoping the whole plant springs up next week! Added a fresh layer of ammendment and a little TPS one in the water.

It's been a busy week. I have got some acoustic ducting. WARNING... Acoustic ducting has Fibre glass in it and is a MAJOR IRRITATENT to both skin and eyes and should be done in a well ventilated area with suitable protection. So, I have also switched from pure batmix to a 50/50 split with a good compost. I have done this as I'm not 100% happy with the level of water retention in the batmix, I'm finding it to be too much and I do not want to run into any issues. I would rather the soil drys out then I know exactly when to water. I have also increased the HPS to 400w (from 250w) it is very difficult to give plants too much light. I am spraying the tent whenever I can, with warm(ish) water to increase the humidity for a short while. I do have 1 plant that seems to be slightly stunted but I'm not worried just yet. I will be looking into fiming and LST probably next week to make sure they have a good base. I have also had to transplant the plants into another pot as the roots are growing like crazy at the moment. I also purchased a dimmer plug for the fan, as I don't need it to be on full all the time (it's a 6 inch fan with duel speed but thats far too much for what is needed now. Other than that all is good

Welcome to Flower Week 3-4 of Divine Seeds Auto 77 Days I'm excited to share my grow journey with you all as part of the Divine Seeds Autoflowering Competition 2025. It's going to be an incredible ride, full of learning, growing, and connecting with fellow growers from all around the world! For this competition, I’ve chosen the Feminized Automatic strain: Auto 77 Days Here’s what I’m working with: • 🌱 Tent: 120x60x80 • 🧑‍🌾 Breeder Company: Divine Seeds • 💧 Humidity Range: 60 • ⏳ Flowering Time: 56 Days • Strain Info: 21%THC • 🌡️ Temperature: 26 • 🍵 Pot Size: 0.5l • Nutrient Brand: Narcos • ⚡ Lights : 200W x 2 A huge thank you to Divine Seeds for allowing me to be a part of this amazing competition and Sponsoring the Strains. Big thanks for supporting the grower community worldwide! Your genetics and passion speak for themselves! I would truly appreciate every bit of feedback, help, questions, or discussions – and of course, your likes and interactions mean the world to me as I try to stand out in this exciting competition! Let’s grow together – and don’t forget to stop by again to see the latest updates! Happy growing! Stay lifted and stay curious! Peace & Buds!

Itty-Bitty is now 15 inches tall, Strain: Royal Dwarf-- so she was not meant to get very big anyways!- VERY happy with the 25-30 buds, she will not grow amy taller, now focusing on fitting up her nuggets. She's the oldest of my 7 strains this run- popped up from soil Oct 3rd 2023. Do not plan on harvest until 2024.

02/01/2021 Going to sprout my last 2 Bluedreamatic seeds from (fast buds). Will be sprouting in mini greenhouse on heat mat. Once seedlings are ready they will be moved under 1000w MH for veg and flowering. 10+hours later they are on bottom of water and time for paper towels in baggie. 02/03/2021 1 seed sprouted and I dropped the other in soil 🙏 I hope because it disappeared! So got at least one Bluedreamatic on the way hoping to see other one sprout in mixing tray. 02/05/2021 She's above ground! Day #1 , currently under 150w compact flourecent 3 way bulb when first true leaves form (Not single finger let)I will start veg cycle under 1000w MH see you in 3-4 days for weekly update. topped seedling pot with vermiculite 1/2-3/4 inches leaving the cotdtyledons 1/2-3/4 inches above surface. Roots should fill up this container quickly, moved under1000w MH light for vegging. Seedling is 3-4 ft away from light but also off to the side no serious heat just about room temperature. I could not feel heat from light where I put seedling, comfortable on your skin is good for plants. 02/11/2021 It's day #6 above the soil, she is doing well already grown 2" above where I topped with vermiculite. At lights out I put her in humidity dome with my tomato seedlings main area of grow gets very cool at night,so I try to keep her at a better temp 72°f.

Vamos familia, actualizamos la sexta semana de floración de estas Permanente Maker de Seedstockers. La temperatura que estuvo entre los 24-26 grados y humedad dentro de los rangos correctos. En cuanto a las plantas pues estas últimas semanas cogimos un poco de trips y pues ahí ando combatiendo con planchas pegajosas de color azul, estiraron bien y ensancharon bastante también. Las flores se están llenando de tricomas y van hinchando, aún con la plaga, por el momento todo correcto, aportamos mega pk y thor de Agrobeta. Hasta aquí todo lo de esta semana , ya quedan pocas semanas iremos viendo como maduran, buenos humos. - os dejo por aquí un CÓDIGO: Eldruida Descuento para la tienda de MARS HYDRO. https://www.mars-hydro.com Hasta aquí todo, Buenos humos 💨💨💨

Trimmed up the bottoms of the plants after the pics were taken, just forgot to take more. Buds are really starting to pop up everywhere. Currently in NY, and my girlfriend is watching the ladies for a week, so I will try to get her to send me some updated pics. These are from ~5 days ago, and there has been substantial bud bulling since then. They are drinking nutes and water like crazy and get topped off on both every single day lol.

5/28/24 oh damn baby, this cultivar is gonna be colorful 6/2 plant is still throwing out pistils but also chunking up quite nicely. I tried to create just mainly top colas. In description she should have a 3-5 nodal colas with disconnected nugs underneath that. But I only ended up with 3 node colas give or take but with maybe 2 more weeks if veg would've given me larger branches and bigger cola structure and can always cut the larfy.

Day 43 of life. Flower 8. Last 4 days a lot of stretching. 14.12.... A lot of life in her... , 16.10.10 TEN TTEENN SIDEBRANCHES!!!!!!! I did nothing. 10 plus main with 2 sides in the main.. 😛 💪 27.12. Day57 22 of flower. 2 weeks re gone. She stopped stretching. Buds on the way.

4/8 frosting up more and more and buds plumping up but not much. I feel its key to note that ine of the plants is more short stocky and the other has greater internodal spacing

FLOWERING STARTS In the the new marshydro set-up 120x120x200 4'x'4 FC-4800 lamp Pubes are showing on all of them happy days in the absolutely amazing marshydro tent 👌🏻💯👌🏻 and no balls in the room yet so that's good at least i know that first grow i had issues with hight but with my 120x120x200 that not going to be end problem so stretch like ya never stretch before 💪🏻 i am prepared now lol the FC-4800 is a beast and still tweaking hight dimmer don't want to burn them but also want to utilize the lamp as much as I can but will get under control 🤘🏻😎🤘🏻 1/11/21 Did some last defoliation and spread the plants out bit Tru the tent got lamp dialed in dimmer around 55% and hight around 45cm above the plants and every week will bump up the dimmer with 5% they are looking very good healthy and i am very proud of the results so far gave the proper nutrients and the normal watering in between everything cool in the hood Will be updated soon happy growings Growmies visit www.marshydro.eu for your best gear and use the PROMO CODE: DEVILSBUD Some info about the Marshydro FC-4800 Superb Quality LED Chips: The whole light is composed of 1206 pcs Samsung lm301b and Osram 660nm chips. More than two times as many LEDs are used to drive the grow lights at low currents and to avoid overdrive. Quality is guaranteed and efficiency is up to 2.8 μmol/j. Even PAR Distribution and High PPFD Output: The multi-light bar design and the densely distributed light chips enable the LED grow lights to achieve the optimum PPFD required for plant growth over the entire effective coverage area. Specifically Designed Spectrum: To ensure even plant growth, blue and red light are enhanced on the basis of a full spectrum combination. Not only does this accelerate plant growth, but it also improves the yield and quality of the plants at the same time. Dimming Daisy Chain Function: The dimming function saves on electricity costs and enables brightness from 10% to 100% for the different stages of plant growth. A single master light can connect up to 30 lights in a daisy-chain system. Business LED Grow Light: The light's wavy heat sink dissipates heat quickly and the IP65 waterproof allows the light to operate in humid conditions. 180° collapsible feature for easier installation. All these features provide favorable assistance for commercial cultivation. And some tent info ●【Lock All Light Insid】MARS HYDRO Grow Tent Interior is made of diamond mylar. Non-toxic to the environment, no harm to plants. High-quality 1680D canvas being double stitched, (ALL OTHERS BRAND grow tent is 601D canvas) which is tear-proof for perfect light locking, No light leaks or rips at all. ●【Durability Grow Tent】Stable Metal corner adapters and poles are the trustful supporters of the tent. No rusting nor paint-falling. Quick easy tool-free installation. Carries strong heavy-duty SBS zippers, double layer lining to create a light-proof seal. ●【Easy Observation of your Plants】Special peeks window made by double layers of cloths. Observe the growing conditions of your plants without opening the tent and avoid disturbing plants. The peek window also serves to dissipate heat and ventilate air. ●【Removable Tray Keep Clean】The package includes a removable waterproof floor tray to hold soil and fallen leaves. The tray can be taken out easily to wash. Removable and water-proof makes cleaning easy. ●【Good Ventilation&Fast Assembly】 Circular double-sleeved vent holes with adjustable nylon strap for air circulation by exhaust fan, ducting, carbon filter, or reflector. Better allows proper light, heat, and airflow. Quick tool-free installation. Reinforced by a sturdy metal frame to ensure security and stability, supports up to 140lb. Perfectly safeguard your plants to thrive even in winter

End of week 8 in flower , girls are on flush now, I have lowered the temp to 72 with lights on and 60 for lights off , I’m running both my Dehumidifers to keep the humidity below 40%, I will give them 4 or 5 days of just water and then no water or light for 48 hrs before harvest, the room is pretty stinky , thank god for can filters, I will post results after the chop.

Day 37 - Everything looks good.... they are drinking so much.... i built a bit more stable light setup, and i'll need to buy afew more plugs and stuff, to fill it out ...... i organised all the 2700k globes, ready to swap in..... still waiting on the exhaust fan, so i'll keep em in "grow" mode another week or 2 .... i'm vaping a leaf or 2, and drinking "green tea hot chocolates" .... it is so delicious in hot chocolate .... my health has picked up since starting the vape/drinks... the 21 thc/19 cbd is supa healthy ... Day 38 - Getting them ready for Flower, noticed they are lacking in nutrients, so i started em on the heavier dutch master gold flower nutrients. Day 40 - Added some pics. (they look droopy because they in night mode, just turned on lights for pic) - Started them on 12/12 flower, still working on getting all the lights, gear, and globes, for the right spectrum and amount of light.... atm got - 7x 2700k (click) , 2x 6400k (osram), + 60w light panel .... i'll go get some more gear today and hope to expand it to 10x 2700k , 2x 6400k ...... I put the exhaust filter fan on seperate power, so it doesn't go on/off with the timer, but stays on all the time.... it totally fixed up any odour problems, haha ....... Added some different pics for my light spectrum ... etc..... the outside winter temp is now at 40-60oF (5-15oC) so with the 12/12h, the temp inside the tent is dropping to 60-80oF (18-22oC), abit low, but flowering is supposed to be in winter, so idk, see how it goes..... I'm new to growing, so idk how this will work out....... just working it as i go.... i noticed afew spots on a leaf, so i upped the neuts abit more, they are still drinking like fish, huge amounts.... Day 40 late - new vids - Got the extra gear and installed it all... redesigned the initial setup, refined it with proper measurements, had to get my steel rule out, lol....... got the 12 leds in and running, 10x 2700k clicks, and 2x 6400k osrams, with the panel..... it's lookin beautiful and got the exhaust on 24 hrs now, all working perfect with 12/12 timer.... they are forming a few spots on leaves, so hammering the nute water into them now... they are drinkin 1-2 litre of nute water a day each.... (nute water = Dutch mater gold one grow/flower, 800-1000 ppm 6 PH) 😎 Some details about lights.... i did some maths on it, and included some handy pics..... because i'm using cheap leds, i'm keeping the distance at 25cm, they are leds so they won't burn, and it massively increases the lumens/lux/Par, and with my home built light setup, the leds are spread out enough to keep it lower.... worked out good..... something of note is that all the led globes are built/made in china... however different marketing/selling companies from around the world... and the german osrams are 1w leds ... by far the most superior, but anyone can design and send the requirements to china to build em, haha) it's not a contest, we all work together.... haha.... the person with the best led light globes gets my business, because i want the best for my babies.... :) (let me explain- 1w led vs 0.5 w led, the watt of the led projects the light, lumens, LX/PAR etc much further the higher the watt of the led....my 600w panel has 0.5w leds, the philips has 0.75, the osrams have 1w leds..... ) each globe philips (dutch)- 10.5w internal - 14 leds 0.75w 1055 lumens each globe osram (german)- 10.5w internal - 10 leds 1w 1080 lumens each globe click (cheap)- 9w internal - 16 leds 0.56w 800 lumens light panel - 70w - 600w 30 red - 8 red 12 blue - 8 white 7500k 1 ir - 1 uv = 20x blue 6400k - 38x red 2700k internal - 60 double leds - 120x0.5w 6000 lm

..

This lady is growing in height at an astonishing rate, the buds sites are already chunky and coated in tricomes. I'm glad I topped this lady when I did as otherwise she could have reached a hight that would certainly give the neighbors something else to moan about. 😀

Infelizmente a dark lemonade não está se desenvolvendo. mesmo solo, mesma luz... mas ela não vai. Já a santasemente está uma gigante, pretendo colher com 16 semanas.