Running bunch of clones with the Floraflex microdrip/platforms. Everything from clone, going to be learning the drip system throughout the grow so could go either way. Check out my Instagram to get discounts and info on the system. The platforms are fuckin awesome they make life so much easier whether your hand watering or running the drip system. I have made a list of products to help those who want to try it out get started. A 6 plant platform setup is under $100 (not including pump $61) and 6 plant platform/microdrip is around $150 BEFORE THE DISCOUNT! Please feel free to contact me with any questions and to get the list, my Instagram dms is prob the best way to reach me I check them every couple days @bangdangbuds. There's 2 gorilla grow tents 4x8 and 5x9, 22 plants total, will be running co2 tanks for the first time on the autopilot monitor, trellis for the first time, floraflex base nutrients, product called oxyphos to keep lines clear and will mix in some samples aptus sent me when possible (cant use with oxyphos due to h2o2. Clones for 5x9 are already in final pots, clones for 4x8 are in the incubator. Strains Seed junky- Cherry Kush mints (mobilejay cut) In house genetics- Trop Juice 1 and 4 Polar Vortex 4 and 6 Garlicane 1, 2 and 3 Platinum Gushers (Stickynicky cut) Frosted Apricots (Stickynicky cut) Ethos- Mandarin Cookies r1v2 3 and 4 Marion Berry 1 Rocbudinc- Purple Candy Paint 3 (bangdang cut)

Termino de este cultivo, llevo un par de días regando solo con agua y a mitad de semana añadi 2ml de flawles finish para posteriormente dejar secar el sustrato y dejar que aquel producto haga lo suyo haciendo que la planta absorba todas sus reservas. Una vez que el sustrato se seque comienza la cosecha. A ver que tal!!

Ci siamo quasi manca poco

Beginning of week... I went ahead and gave the medium a little bit of a flush today. Finally figured that its gonna take 3L to get a decent amount of runoff.. Seems to dry out pretty fast too.. Might need to water daily.. For sure every other day, if not. I know that I shouldn't water the entire medium when she's this young because the roots dont go out that much, but the medium was a bitch to get wet.. Literally took about a week.. But she is doing great.. Her stems are giving out purples! I know seedlings tend to do that.. But I've never seen damnnear all the stems purple. I can't really get a pic of it cuz my camera/phone sucks.. But trust me, it's there lol. Gorgeous plant! Mid week.. So I've been watering once daily.. One day I will give nutes and the next just plain pH'd water.. So basically just water, feed, water, feed.. This is to avoid the dreaded salt build-ups! Today was just water but the runoff came out at like 700 PPM.. I never even put that much in! This shouldnt be an issue.. I need a better watering can. Just been using 1L bottles woth a screw on sprinkler head.. Its not a bad idea.. Especially for smaller grows.. But I'm going to get a 1 gallon watering can with a sprinkler head.. It should help me be able to spread the water out more evenly across the entire medium. But that 1L bottle with the srinkler cap is perfect for my other nano grow I got going ("*TC* created my own feminized strain" diary). But going to Home Depot today to get that new watering can.. I like the idea of the sprayer jugs.. But those things take like an hour to use up a gallon.. I love spending time with my girls, but damn! Lol.. But as for the lady.. She is doing great! Not sure why the leaves almost ALWAYS get kinda wavy.. I think I read that it MAY have something to do with calcium deficiency.. But I dont understand how that would be possible. I keep the pH at 6.3 (even the runoff comes out a 6.3) and I know I'm putting PLENTY of CALiMAGic.. maybe it's just the way these plants grow.. Its only the first 2 or 3 sets of leaves that do it.. Just weirds me out a little.. She is beginning to sprout some little branches! So excited! I can't wait to bend her over and start some LST!!! She is very happy and super healthy! By the end of this week the next set of leaves should be pretty big and I'm sure branches will be shootin out too! So happy! 😊 Next day... So she still looks great.. No burns, no deficiencies.. But I went ahead and just gave a little dose of Silica and a little CalMag.. Cuz the PPM was coming out at 700 PPM yesterday.. It was 6.3 pH and 300 PPM going in.. But the runoff still came out at 700 PPM.. Wtf.. I need to get a better watering can.. So I can at least start running a gallon thru the medium.. I'm gonna just leave it for now, I suppose. Gonna try and get a watering can tonight... Hopefully.. But she is still growing nicely and looking nice and green, so I guess I can't complain too much. Almost end of week.. I'm starting to think I need to raise my light up or turn the power down a bit.. My plants almost always stay very short and stout to where it makes it difficult to begin LST.. Its obviously too early to be trying it now.. But just something I've been thinking lately.. Help save some electricity too.. Oh yeah, so I got a new Mars Hydro TS 1000 and I noticed that some of the reds (not deep reds) are a little dim.. Almost as dim as the deep reds.. There should only be 2 deep reds, but at 50% power it looks like at least 5 or 6 of the reds are a little dull or not as bright as the others.. At 100% its kinda hard to see but that's expected cuz its bright as fuck lol.. Idk.. I could just be tripping.. But it shouldnt hurt anything.. I hope. But as for the girly.. She's doing great.. Just ordered some FloraKleen to help with major salt build-ups and to help with the pre-harvest flush.. But so far, not major salt build-ups.. Nothing I had to put her into the sink and go crazy with the shower head for at least lol.. But she's happy and perfectly healthy as far as I can tell.. I love growing cannabis!!! It's soothing to the soul.. Being one with nature.. I've even sprouted a cantaloupe in my tent lol.. Gonna see if I can keep it in there and harvest some fruit! I wanna get some morning glory and have it running up the tent and then when its time to flower a photoperiod, it will produce some gorgeous flowers along with the cannabis flower.. Just a thought I've had.. Will be updating with pics tomorrow! Cant wait till next week! That's when the exploding growth happens!!! End of week.. Today was just a plain pH'd water day.. Going in: 6.2 pH at 240 PPM.. Runoff: 6.0 pH at 500 PPM.. With my luck, the moment I was finished, Amazon dropped off the FloraKleen (and some trellis netting).. I dont think FloraKleen is meant to be used in between feedings like that tho.. Unless the runoff PPM is just outrageous, I'm not gonna use the FloraKleen.. But it is a great addition to the Flora family! Lol.. Anyways.. I noticed 2 pistils/calyxes (preflower) already.. They are both at the same node, but opposite sides of the main stem.. I hope she still has at least 2 more weeks of veg before flowering.. 3 weeks would be perfect and ideal.. But I can work with 2.. But she is happy.. So I'm happy! On to the next!!!...

Les plantes on doublé de taille . Début d'aparition des bourgeons.

03/17/2022 9 weeks today 63 days Time to break out my loupe to inspect for ripeness 😆✌️🏻seeds are loaded in tops l, so lower buds will be my focus.

;)

Aplicamos recientemente jabón potásico por problemas con trips... estamos controlando todo a tiempo, en 3 semanas ya pasaremos al armario grande para continuar dándole crescimiento para las nenas farmers!🍁

It's been 74 days of flower now and they only got another week left. A few of the girls were acting up so they were put into dark solitary confinement for 24 hours🤣🤣🤣🤣 bad girls... I have been flushing them for 2 weeks now. Almost there 🤘🤘. I'm very happy how they have turned out, the color, the smell, the crystals 👍. Very proud of what I created. One was chopped last week and is trimmed up and curing in jars now. Looks and smells good👍... The gals are still loving the new fc4800, TSW2000 and their new 8x8 mars hydro grow tent as much as I do👍 leaves are sticking straight up towards the light. Love how easy the zippers are to open and close. Nice and strong and guaranteed to last. It has extra material on the backside of the zipper that helps for light leaksand enough ports and vents for anything you need in it👍. the tsw2000 is still going strong and is also a very good light. Its been going almost nonstop for 6 months and still working the same as when I got it👍. not much heat off both lights but the fc4800 is alot cooler and the heat-sinks work extremely well. I have it daisy chained to the tsw2000 and 1 dimmer controls the other and i don't need to be reaching in too far to dim the other light, it's awesome and I can't wait to buy more lights to daisy 4 together👍. I would recommend this light to everyone that grows with leds and have trouble with temperatures getting too high. Even if you grow with HPS lights I think any mars hydro light is a MUST TRY. I like how heavy both lights are because I know it means they are built soild and strong 💪. Very good sign with the frost they are starting to get thanks to bith mars hydro lights. I can notice more frost under the fc4800 and I'm thinking it's from the UV DIODES they put on the fc4800 👍. 2 days ago they all smelt like my nuken, sweet marshmallows. But now I can smell the monkey dough and gorilla glue and skunk monkey coming through👍. I touched a bud on the gorilla and monkey fingers smelt like fruit loops👍 really pleasant smell. Lingered on my fingers for atleast 30 min. I'm glad mars hydro is under priced compared to some brands and for how popular they are. usually companies would charge more. Thanks mars you guys are awesome 🤘🥁🎸. I'm getting a new exhaust fan soon. An 8 inch that will work alot better than my 4 inch lol. Wayyy to small for a 8x8 Grow Tent. Dehumidifier is going almost non stop to try and get the humidity down. I love how both lights on 100% power only raise my temperature 2 or 3 degrees 👍. You can rest your hand on the lights and not much heat comes off them. Obviously there is some heat but for the brightness of the lights and only raising the temp that much is awesome 👌.  And if I wanted to I could remove the driver from the fc4800 and run it on the outside of my tent because the cord is so long but 2 or 3 degrees is barely nothing👍. The girls are starting to bulk up abit now and only 3 weeks of flowering, these lights are awesome 👌.  My last run of monkey dough and gorilla glue didn't start showing alot of crystals until week 4. These were only 2.5 weeks and I started noticing some frost. Next week I will be able to tell more about what these custom bred seeds will be like. I love how the smell is changing now. Didn't want all them to smell like nuken marshmallows lol. It's awesome that I can get right inside the tent to do any work i need👍. Even if I wanted an 4x8 tent. I'd rather this 8x8 because it's so easy to work with the plants and have so much room to move around and massive headroom when I'm in there chillin with the gals🤣🤘. FOR EVERYTHING MARS HYDRO VISIT: www.mars-hydro.com PROMO CODE: rocknroll VISIT THE ALIEXPRESS STORE: @marshydro_aliexpress2 Instagram: @marshydropenny https://youtube.com/channel/UChU5ZWwNi-DvnO3oWVU3ceA Thanks for taking the time to read and check out my shit🤜🤛 GET THE MAX FROM MARS👍: Welcome one of  the newest members of the Mars Hydro family🤜🤛🤘. The Mars Hydro FC 4800 480W LED Grow Light can accommodate up to a 4' x 4' area for flowering. It has OVER 2000 LED chips consisting of the best selling Samsung LM301B diodes which has a Luminous Efficacy of: 220 lm/W 0.2 W, 3 V mid power, Osram 660nm Diodes, Infrared light and UV LIGHT👍. It boasts the incredible efficiency of 2.8 µmol/J, maximum 2.5gram yield per watt with 30% higher Average PPFD. This High-intensity spectrum is beneficial for plants at all stages - from veg to bloom, and creates Big dense Buds👍. achieve 50% higher yields & quality compared with the old lights! Only consumes 480W for 4x4ft personal grows, and 3x3ft for commerical grow. It comes with a dimmer and daisy chain function with a  maximum of up to 15 lights, the master light controls the rest👍. Wide 6-bar design offers even & wide canopy coverage and can maximizes your grow space. slim 180° FOLDABLE DESIGN... YES I SAID FOLDABLE🤘🤣 , making it compact and easy to install, it's IP65 WATERPROOF and will give you no worries while growing in a humid environment and makes it a flexible high performance commercial grow light for enormous  SUPER FROSTY yields.😛😛😛. MARS GETS EM FROSTY BOYS👍 AWESOME HEAT DISSIPATION: The Low energy consumption FC4800 growing light has 6 passive-cooled bars and an aluminum heat-sink a removable driver  you can upgrade later or have it outside your tent. with zero noise  you can save up to 50% in your electricity bill compared to HID's or HPS lights! It also has a removable driver so you can upgrade it in the future or have it outside your grow space for better heat control in your growroom👍 UPGRADED FULL SPECTRUM: Yield Max Spectrum with enhanced red (Top-Bin Samsung 3000k-5000knm, Osram 660nm Deep Red), speed up blooming & fruiting, perfectly suited for full-cycle growing. The FC4800 LED grow lamp was born for Big Buds, perfect for commercial, grow tent, grow room, hydroponics, and all soil grows.👍 THE BEST SAMSUNG DIODES: THE FC4800 has Top Bin genuine Samsung Osram Diodes, combined with remarkable 2.8 µmol/J Efficacy, 30% higher Average PPFD, 50% less energy consumption, to maximize your yields. They give you a TRUSTED 3 years warranty 100% Satisfactory guaranteed!!! The MARS HYDRO 8x8 Grow Tent interior is made of a unique diamond design mylar which is highly reflective. (Other companies mylar and reflective rate is as low as 50%, and it won't provide efficient light. They use thick 1680D oxford canvas, and being double stitched, it is tear proof and perfect for locking in the light. Their grow tent keeps 100% of the light inside the tent and helps your plants absorb more light. EXTRA-THICK material means No light leaks or rips at all.👍 Strong Stable metal corner adapters and poles are the trustful supporters of the tent. It's very sturdy, neither rusting or paint flaking off. quick and easy tool-free setup. They use heavy-duty metal zippers, with double layer black lining, by far the best on the market which creates a light-proof seal. The Easy observation windows are made by double layers of cloth. Observe the growing conditions of your plants without opening the tent and avoid disturbing your plants. The observation windows also serves to dissipate heat and ventilate the air. The tent includes 2 removable waterproof floor trays to hold soil and water. The removable tray can be taken out to wash easily. They guarantee the grow tents are easy to install even if you've never done something like this before. Clear Instructions and no tools needed! They also offer 30-day unconditional refunds for quality problems. Just contact their friendly 24 hours customer service 👍

Well...To Start I must say I Love the new Mars Hydro TSL2000 Complete Tent Kit, It has everything you need to do an indoor grow, all you will need is some grow medium and seeds...ready to go. I personally am adding an Inkbird ITC308 controller to maintain Temps, but not needed, just my personal preference... This is an awesome kit,, from the light and tent to the Exhaust Fan and Charcoal Filter to humidity/temp meter, Light Timer, Flex Pipe, to the cloth grow bags and everything in between...Truly Impressed.. This will be my Wife's New Tent, and it looks like it will be for Auto's, lets see how much abuse they can take ....lol * WSE Tangerine Dream Auto Flower Fem's * Mars Hydro TSL 2000 Led * Mars Hydro 2x4 Tent * Mars Hydro 4" exhaust Fan and Charcoal Filter * Inkbird ITC308 Temp Controller * 5gal. Cloth Pots * Small ceramic Heater * 4" internal circulation Fan * Diatomaceous Earth (food grade) She has done such a great job with Her first outdoor, (purple urkle) and then her indoor, (pinkman goo) she deserves this bigger better system....Stay Tuned.... Please Like and/or Follow the Diary, May all your grows be plentiful and trouble free.....

Hey guys! Another week and another update! At the end of this week I decided to finally start with the main lining and I won't lie... I was extremely nervous haha 😱 but I believe I did it well, without any major issue! I also decided to move the small 4th plant into a new home and it seems she will like the extra space! This week I also didn't feed my babies as I over watered them 😞 but they still showed some great progress! So I suppose it wasn't that bad! 😊 Soon I'll update the next week, which is also ready and has even more timelapses! Thanks everyone! :D

77 dienos!!!! Oho, mergytė tiesiog nuostabi :) ji puikiai atsigavo po HST ir lapų valymo :) Mergytė labai džiaugiasi gavusi visavertę mitybą su @Plagron - jai tai patinka :) 6,3 pH vanduo su 1100 ppm :) Sėkmės visiems!:).

week intel: im felling in love with them everything is good . this week was time of second net layer , the first layer was for spreading the branches and doing LST now the second layer is for supporting branches for later weeks when the buds gain weight and gets heavy the net will hold branch stand up without benting. stresses: im just gonna cause a little E.C stress to raise the terpens. i found their max tolerance is 1.9 E.C so im not gonna reach or get close to that amount again and beside this wont cause any more streses untill week 6 that will do second pruning and we are done with trainings then. feeding: as always im feeding plants 3 times per week with nutrients , no plain water at all, just with nutrients with adjusted p.h at this order : day 1 : i feed them heavy with silicate +base nutrients(calcium & micros + Bloom) and karbo about 950 ppm - 1.8 e.c to cause a little e.c stress. day 3 : i feed them low dose for start of Green House Feeding Booster around 267 ppm - 0.6 e.c alone cuz this bad boy is very strong. day 5 : i feed them with medium dose of Top-Max around 160 ppm - 0.3 e.c to let them recover the stresses and eat the previous nutrients untill next feed at next week and the next 2 days will rest and eat :D just remember never feed them plain water besides the first week of germination always feed water with nutrients to feed them right p.h every time and to avoid excess water problems, and let them eat the previous meal for 24 hours and dry the soil, so at total only feeding nutrients 3 times a week other days let them dry and rest

Unfortunately because they were in the dark when germinated & sprouted they stretched for light quite a bit, which made the stems weak, I had to support some but 1 of the Tropicana Cookies was to weak & bent right over. I tried to stake it to support it but it died a few days later! I have put another Tropicana seed in to a jiffy starter to replace it. Added a fan to help strengthen stems & it has started to strengthen them up allready

NICE BLACK-OUT FADE TIPS BURN HERE & THERE CUD AVE TAKEN HER XTRA MORE WK BUT THE OUTDOOR WEATHER WAS TOO RISKY!!

This week I top all 8 Green Poison ( 4dwc and 4 coco ) clones. They look healthy and happy and few days later I already start to low stress training (LST) them.