Week 1 of flower everything looks great and green fed full strength Emerald Harvest full strength. A little bit of there terms are coming out now and they smell good already

Day 58: Everything seems to go smooth. I got my new lamp up, and are experimenting with dimmer, hang height, and space between the bars. This is new for me, my old lamps is garbage compared to this! But as I have 2 pre-/flowering girls, and 4 babies I decided to go with little space between the first 4 bars (for the adults) and the last 2 have some more space between (for the babies), and are not going all the way to the edge. The adults is higher, than comes the teens, and finally the babies so they don't get the same light intensity. I am currently running it pretty low, about 35% and will see the next couple of days how the girls will react Day 61: The girls are starting to hang a bit. I do not know what is causing it, or is it just normal? I took the pictures and video about 3 hours after the light turns off, so it might just be that they are sleeping? Other causes could be too little light, as I just switched to my new light, and are running it for the first time. Maybe I do not water them enough? The humidity has also increased, and is around 50-65%, maybe that is the reason? I also started using RO water, so could be something with the nutrients? Do any of you fellow growers have any idea? UPDATE: Big thank you to @Maltaherbman for your answer. I have raised the lamp a bit. I read 900+ ppdf on my phone before, and now I am getting maximum 800. This is properly not a correct reading, but at least I have it to compare with. I waited to see what happened after the light turned on. Ill took 2 new pictures, and the left lady is all ready recovered, the right one almost, so they might just have been sleeping, but ill keep the light as it is for now. Also a big thank you to you @GrowingGrannie - I keep the coco wet at all time. I have been flushing them a couple of times before, so maybe the watering volume this week is a little lower than usual. Also the watering volume is kind of an estimate, but I will take your advise and keep better track of how much I am watering, but I think its about 2-3L every 2-4 days

Eighth week of flowering started. I've changed the water into the pots. I will continue with the same nutrients ratio (more bloom and micro, less grow). The fan is turned three hours on, one off. Inkbird parameters are unchanged (20° -3° H +2°C). Plants are healthy, bushy and tall. Light power @ 100%. Extractor @ 100%. D49: changed the water into the pots. Added 15 ml grow, 30ml micro and 40ml bloom. pH@6 EC 1.2 D52: plants are drinking and growing a lot, today I've added 3 liters of water to each pot. The #1 reached the maximum height I can manage with my little tent, I cannot raise the light any more than this. D55: the plants grown a lot reaching the top of the tent. Lesson learnt: only one plant in hydroponics for this tent

2025-09-18 A lot happened since the last Update Yesterday i started the Autopot-System, and from now on just appreciating them no more work because of the " only- add-water-Strategy By Biotabs. i was cutting some lower leaves and shoots- and she got some supercropping. to spread her more and topping aswell 🔄 Transplanting Process 🏺Container Setup Container: 35L Smart Pots Growing Method: Autopot System with "Water-Only" strategy 🌿 Soil Preparation Base Mix Recipe: 5g per liter soil - Startrex 5g per liter soil - Silicium Flash Mixed thoroughly for optimal distribution 5x Fertilizer Tabs - strategically placed near bottom (20cm height) for autopot compatibility 1 tsp Mycotrex - applied directly in planting holes Bactrex solution - used for initial watering 🏗️ Layer Construction Bottom Layer (10cm): Drainage material (clay + perlite) Air Circulation: Airdomes positioned Growing Medium: Pre-mixed soil with embedded fertilizer tabs Root Zone: Mycotrex application + seedling placement Initial Watering: Bactrex solution ⚙️ System Activation ✅ Setup Complete - Autopot system now delivering automated water-only feeding From this point forward: Pure water automation via Autopot system 🙏 Acknowledgments & Partnerships Special Thanks: Biotabs - Premium nutrient solutions 🏭 Puraplants - Autopot system provider 💰 Exclusive Discount Codes 🌐 Puraplants (Hamburg, Germany) www.puraplants.de Code: GrowBigger → 10% OFF Biotabs Webshop biotabs.nl/en/shop Code: GDBT420 → 15% OFF

6/19/2024 These are going to be My next run. Excited Transplanted into 1 gal and added (too) much myko powder. 6/23 she completely drooped and is showing signs of stress or shock. 6/25bent her in half. She was starting to harden off(up?) But I wasn't sure what I wanted to do with her yet. I knew I was going to train or top or something. She wouldn't become much more than a single cola and a handful of buds(I assume). Either way I can shape her up as we go. 🙈🙉🙊 6/24/24 applied veg nutes. Terp tea grow 711. A single tsp or 5 ml per gallon of substrate. I need to remember to add uprising foundation as well

Meow! Week 4 is upon us! We adjusted her ties this week and removed a few of the larger top fans..her color is nice and uniform..her bud development looks closer to week 3 than 4 but she'll probably start plumping quick in the next week..we lost half of our flower lighting for most the week, we use a dual 315watt and one side of the ballast had a short..we remedied this and ordered another 315watt CMH..now that we have more light than we need, moving from a 4ft an 8ft flowering tent may be in our future... thank for reading and happy growing 🐱 7/12/21- light defoliation thru the center to base and removed some large fans from the top of the main stems

Such an amazing flower, really great especially a phenomenal hash producer yall will be super satisfied with this one!! She’s a shorty but Make sure you top 4 to 6 times or even more to have all them gooey bud producing heads , Dirtyblonde is absolutely an amazing plant!!

Flower Week 2

So I gave the plant one more dynomyco feeding. I’m over watering her a bit—- going to have to control that a bit more. No nutrients yet. Looks like she is pre flowering a touch.

welcome to Day 76 3/3/2021 glad to have this harvest under my belt she has some very nice looking buds and I cant wait to smoke them. there are more updates on the way as she dry's out and I get the real weight update Day 79 3/6/2021 the dry is finished and its all weighed up. on my trial smoke it was very smooth and tasty and a pretty strong head high but not over powering. I uploaded macro shots just for you fellow growers it was a small harvest but it was a small plant so I'm happy I got that much 😀🙏

Adding video

Everything is going well ...🍃🍃🍃 Just the weather a little too warm outside... 🌞🌞🌞Ladies are ready to be cut ...🍃🍃🍃 It will be a challenge for me ...😅🍃🍃🍃

💩Alrighty then Growmies We Are Back At it 💩 Well folks we just finished up the last run and so we are bad to do it all over again 😁 So what do you say we have some fun 👈 We got some Z & Z 🚗 🚘 🚗 🚘 👉 From Exotic Seeds I just had to try this one again and see if the last seed would germinate and she popped 👌 Seed soaked for 24 then placed in a tub with paper towels , once it cracked and rooted , placed into its main pot 👌 FC4800 from MarsHydro Lights being readjusted and chart updated .........👍 www.marshydro.ca 👉I used NutriNPK for nutrients for my grows and welcome anyone to give them a try .👈 👉 www.nutrinpk.com 👈 NutriNPK Cal MAG 14-0-14 NutriNPK Grow 28-14-14 NutriNPK Bloom 8-20-30 NutriNPK Bloom Booster 0-52-34 I GOT MULTIPLE DIARIES ON THE GO 😱 please check them out 😎 👉THANKS FOR TAKING THE TIME TO GO OVER MY DIARIES 👈

The last week I kept the girls in the shade a bit during the day. We´ve had temperatures close to 40 degrees C. I didn´t want to expose them to too much heat.

Coming along very nice now and bushing out nice too , The side branches are as thick as the main stem and showing the early stages or pre flowering , Still not done a great deal too this lady and have left her too do her thing ,

🌱 Germination Journey with Terpyz Mutant Mentha de Croco 🌱 Hey Grow Fam! Today kicks off an exciting adventure with Terpyz Mutant Mentha de Croco genetics. I’ve got 10 regular seeds ready to sprout, and I’m looking forward to discovering some beautiful female phenotypes—and maybe even a standout male for potential future breeding. It’s been a while since I’ve worked with regular seeds, so I’m thrilled to dive in! Germination Process Overview: Here’s a step-by-step rundown of the germination setup and process, with a special focus on the equipment and nutrients that are helping these seeds thrive right from the start. Step 1: TheCannaKan Germination Pod 🌱 For germination, I rely on TheCannaKan—a device I’ve come to love and trust. It’s designed to create the perfect microclimate for seed germination, and within just 24 hours, the seeds started showing signs of life. By the 32-hour mark, they were all ready to be transferred to the next stage! I can’t recommend this gadget enough for anyone serious about getting strong, early growth from their seeds. • Why TheCannaKan? • Humidity Control: Ensures seeds stay hydrated without oversaturation. • Stable Temperature: Maintains an even temperature around the seeds, so there’s no shock or stalling. • Enhanced Oxygenation: Keeps fresh air circulating, helping prevent mold and ensuring seeds don’t suffocate. Step 2: Transfer to Root Riots & Aptus Holland Supplements 💧 Once the seeds were sprouted, I transferred them into Root Riots, known for their excellent water retention and structure that encourages strong root growth. Root Riots also have a pH-balanced, spongy texture that makes it easy for roots to penetrate, promoting sturdy, healthy root systems. At this stage, I started using Aptus Holland’s Regulator and Startbooster at 1ml/L each. Here’s why I chose these products for early growth: • Aptus Regulator (1ml/L): Helps strengthen the plants against environmental stresses by supporting cell wall structure. It’s a fantastic choice for giving young seedlings an early boost in resilience. • Aptus Startbooster (1ml/L): This product provides essential microbes and nutrients that stimulate root growth and early plant vigor. Especially for regular seeds, the early root development makes a noticeable difference in later growth stages. Step 3: Lighting with Future of Grow (FOG) LED at 200 PPFD 💡 For lighting, I’m using a Future of Grow (FOG) 600W LED. For the germination stage, I’ve dimmed it to around 200 PPFD (photosynthetic photon flux density), which provides just enough light for healthy, strong seedling growth without overwhelming them. • Why Low Intensity? • 200 PPFD ensures that young plants aren’t exposed to too much light, which could cause stress or stunting. This level of intensity is perfect for encouraging healthy development without risking “stretching.” • The FOG LED provides a balanced spectrum tailored to plant growth, setting up these young sprouts for success as they grow. Step 4: Environmental Control with TrolMaster Tent X Controller 📲 For monitoring and control, I’m using the TrolMaster Tent X Controller, which lets me dial in every aspect of the environment to make sure these little ones have the perfect conditions for germination and early growth. • TrolMaster Benefits: • Precision Control: Adjust temperature, humidity, and lighting all in one place. • Notifications: Sends updates in real-time to my device, so I can make adjustments as needed without being physically present. • Consistency: Maintains stable conditions around the clock, reducing stress on seedlings and ensuring they’re thriving. Grow Tips & Reflections: Germination is one of the most crucial stages in a plant’s lifecycle. Starting with strong genetics like Terpyz Mutant Mentha de Croco, combined with a solid germination setup and the right nutrients, creates the foundation for a successful grow. 💡 Quick Tips for Fellow Growers: • Hydration Balance: Don’t oversaturate! Moisture levels should be high enough for the seeds to sprout but not so wet that they drown. • Light Management: A low PPFD for young seedlings prevents stretch and keeps nodes tight, preparing them for a healthy vegetative phase. • Environment Consistency: Use a reliable controller like the TrolMaster Tent X to manage your settings, and consider monitoring tools for real-time adjustments. Shout Outs to the Community: Big thanks to Terpyz Genetics for these incredible seeds, Aptus Holland for their top-notch nutrients, Future of Grow for the stellar LED lights, and TrolMaster for the amazing controller. Also, shout out to all of you in the growing community—you make this journey exciting and filled with endless learning. Let’s keep growing and sharing together! That’s it for the germination update! Next up, I’ll be monitoring growth closely to identify strong females (and maybe a standout male for breeding). Stay tuned for updates on our Mutant Mentha de Croco adventure—this is just the beginning! Genetics - Mentha De Croco https://terpyz.eu/products/menta-de-croco-fern-type?_pos=1&_sid=e9237cbcb&_ss=r DogDoctorOfficial Discount Codes @ terpyz.eu - DOCTOR 15% off Nutrition - @aptusholland https://aptus-holland.com/ Led Power @ F.O.G. Future Of Grow https://www.thefuturofgrow.com/en/online-store/BLACK-SERIES-600-p489093171 Controls @ TrolMaster https://www.trolmaster.eu/tent-x As always thank you all for stopping by, for the love and for it all , this journey of mine wold just not be the same without you guys, the love and support is very much appreciloved and i fell honored with you all in my life With true love comes happiness Always believe in your self and always do things expecting nothing and with an open heart , be a giver and the universe will give back to you in ways you could not even imagine so Growers Love To you All 💚

day 9: the roots start to come out of the netpot slowly (see picture) the water level is 1 inch under the netpot, the bubbles make the roots wet. nothinh much to do here just waiting for water change. the ph has gone up to 6.0 maybe because of the rockwool touching the water when the water level was higher. in the next days i expect the roots to go in the water day 11 (december 15) roots com trough net and i did water change with double strength (507ppm) calmag to around 200 and 100ppm of each three part bottle