Likes
Comments
Share
The bushes are shooting up fast — the fan leaves, palm-sized by now, are already poking into the light. LED is not HPS lamp, good for me :) I'm training the branches daily with soft wire ties from the garden shop — cheap as chips. Watering with RO water, pH dialled in. A 15-litre reservoir makes it easy to manage PPM and pH, and the air stone keeps the solution well-oxygenated — roots love it. 3 weeks in without Simplex Coco base. A couple of days ago the stems started showing a slight red tint. Figured I probably didn't mix enough nutrients into the top layer: I went with 3 grams per litre of substrate — 9 litres of Simplex coco brick and 3 scoops of nutes, carefully blended. Was worried about overdoing it. Still, even at the minimum dose I got minor burn on the lower leaves. The substrate had been pre-soaked with Simplex Coco base — should've flushed it for a couple of days first with a CalMag solution and pH 5.6–6.3. Three weeks later I top-dressed with another half scoop (5 g) per pot. For a long-flowering sativa that's pretty standard practice — topdressing every 2–3 weeks works well. Overall, Bio Feeding is a really straightforward option — accessible and easy to follow even for a beginner like me. Can't wait to taste the end result: never grown bio before, only mineral nutrients.
Likes
2
Share
@Monketh
Follow
Good week, healthy plants. Will flower this weekend, took clones/clippings.
Likes
9
Share
Flush flush Bigger buds buds Let’s prepare harvest :) Did the full cycle from the advanced nutrients feeding chart , know I flush and prepare the harvest , planing a late harvest for more cbn and relaxing high - and little bit other terps Today 16.02.2025 - blooming starts at 20.12.2024 - D59
Likes
8
Share
Que pasa familia, vamos con la quinta semana de vida de estas Purple Lemonade FF de Fastbuds. Vamos al lío, las plantas se trasplantaron en macetas de 7 Litros, con tierra top crop y plagron mezclada con un poco de coco. El ph se controla en 6.5, la temperatura la tenemos entre 24/22 grados y la humedad ronda el 70%. El ciclo de crecimiento puse 20h de luz, el foco está al 50% de potencia. - os dejo por aquí un CÓDIGO: Eldruida Descuento para la tienda de MARS HYDRO. https://www.mars-hydro.com Hasta aquí todo, Buenos humos 💨💨💨
Likes
19
Share
@lakocinka
Follow
I'm totally happy about this run. First time trying sog and tbh till now seems all good. Any feedback will be appreciated. Thanks and Happy growing
Likes
8
Share
@Dineh
Follow
BIG CONTEST!!!! i recieved already new seeds from SWEETSEEDS so i gonna hold a CONTEST!!!!!!! guess my outdoors plant harvest weight and if it is an SWEETSEEDS sweet amnesia haze xl auto or not and WIN TWELVE SEEDS OF SWEETSEEDS send me your input outdoor plant guess the harvest in grams and guess of itis a SWEETSEEDS or not indoors six plants of SWEETSEEDS sweet amnesia haze xl auto three times sweet gelato auto three times
Likes
4
Share
Sry for long delay in posting, things went a little crazy after covid19 hit hard, but everything is looking good gg4 #1and 2 are 1 day away from starting week 4 of flower and strawberry banana is 1week 5 days into flower
Likes
37
Share
@Roberts
Follow
The tiny potter is growing great under the Mars Hydro FC4800 light. Huge plant for a small potter. Been feeding 2 to 3 times a day to keep ph in check and coco wet. Plus nutrition for this tiny potter grow. Hopefully she continues to progress well. This is a very tricky grow. Nothing else to report. Thank you Mars Hydro. 🤜🤛🌱🌱🌱 Thank you grow diaries community for the 👇likes👇, follows, comments, and subscriptions on my YouTube channel👇. ❄️🌱🍻 Happy Growing 🌱🌱🌱 https://youtube.com/channel/UCAhN7yRzWLpcaRHhMIQ7X4g
Processing
Likes
13
Share
@kevgrow
Follow
Hey Friends, end of week 8 from seed :) Many new things have occurred this week Plant 1 is beginning to mature, its not growing in height as much as before but now its getting thicker and looking stronger. I am slowing increasing the amount of nutrition, I don't want to burn them at this stage. I noticed some of the leaf stems were turning red, so I decreased the light and its turning back to green. Did some defoliation this week to give more room to the smaller leaves. Plant was getting taller and was too close to the grow Light so I installed some netting inside the tent and it helped control the height for now, if it gets taller ill purchase a bigger grow tent 😩 Looking forward in seeing some bud formation in week 9, will keep you guys posted. Thanks for all the support, see you guys next week! #FirstGrow #Plant#1 #MysteryStrain
Likes
9
Share
31 days into flower, I have slowly upped the cf to 1.8 since my last post, I have added a bit of Cal/Mag and upped the pk and treacle. My lights will come on as I am writing this, so we will see soon if yesterdays biggest feed to date has had any adverse effects. Video is my run off left to stand in shopvac over night. As you can see it is 'Alive' and bubbling away. What is going on does not smell like yeast or Vinegar, it smells like 'Clean fresh Compost'. So I expect the runoff is producing CO2 and Methane. CO2 is good, roots can absorb it. With the Methane there is possibly some Ethylene being produced, which may have some very positive benefits as far as plant chemistry and suppression of masculine traits? The gases bubbling off the runoff 'Soup' would not be difficult to Identify with a couple of wash bottles and a few readily available reagents. I ain't got the time, or the kit. There are definitely a few different organisms at play here as you can see different structured plaques forming on the water surface, and different foams forming with the bubbles. Just took photo's, everything looks good except Blue Sherbalato, Developed a kink in top leaf, that could be a couple of things, I shall work it out. (highered light a bit, dropped c/f, pushed cola away from light centre, and I shall let this pot dry out a touch, it has been happy till now.) Every thing else is looking OK, all got a touch of tip burn. Canna Coco sometimes does not have enough N for grow, and almost always too much N in flower so I expect a bit of tip burn especially in high calyx to leaf hybrids. The plants are using around 2 litres of water + food per day with a slight + or - on c/f with first runoff. Ph going in at 5 to 5.5. First runoff is 6.8 I will keep watering till runoff hits 5.8 or lower so it usually takes between 3 and 4 litres of nutes. per day. Hate being this wasteful with nutes , not enough going on in the garden to use it all out there yet, so down the drain it goes. I have thought about re-circulation, if I was bigger and running clones maybe. The Blue Sherbalato has shown me I got to start treating these plants as individuals and tailor their treatment accordingly. The GTH have changed their smell, the Lemon is still there but fuel and floor polish is becoming more dominant in 3 of the plants. My plants are in 10 litres of Coco in 15 litre felt pots rolled down. Maltezerz, Orangesicle GTH 1, . plus the Scott's OG will run out of pot space so I will top them up to the 15 litre. Got to make decisions on the cuts of these plants soon. I hate culling plants before the parent has finished its cycle.
Likes
9
Share
All the photos are in the 8x8 now just a few autos in here now FOR EVERYTHING MARS HYDRO VISIT: www.mars-hydro.com www.marshydroled.ca PROMO CODE: rocknroll VISIT THE ALIEXPRESS STORE: @marshydro_aliexpress Instagram: @marshydropenny Thanks for taking the time to read and check out my diary🤜🤛 TS3000 FEATURES: WIDEBAND SUNLIGHT FULL SPECTRUM LED GROW, Infinite close to natural sun light, suit for all plants whole stages indoor growing, rapid plant response from seed to flower, achieve maximum quality and quantity, much better than traditional HPS grow systems. HIGH REFLECTIVE & NOISE FREE-Fanless LIGHT BOARDS design will make your growing life easy and quiet, quickly heat dispersing material aluminum reducing light lost to aisles and walls, increase the light intensity up to 20%, allowing your plants receive more energy and without burning your plants for maximum headroom. HIGH EFFICIENCY ENERGY SAVING PLANT LIGHT, high-power NEW LED grow, Compares to traditional 3000 watt HPS lamp and other brand led grow light while only 450 watts true output with 1016 LEDs, more scientifically and energy-efficient! Perfect for 5' x 5' veg stage, 4' x 4' bloom stage, higher intensity in a MARS HYDRO grow tent, reflective area, or by crossing over using multiple TS3000. BOOM YIELD LARGE GROW LIGHT, NEWEST SMD LED technology provide highest PAR/LUMEN output(1095.6umol/), makes you get 30% higher yield compare OLD led lights, can get max yield at 2.5g/watt, less pay but get more yield, bring a amazing grow trip to any home grower as it beams huge amounts of light energy to plants below. COMMERCIAL LED GROW LIGHT, Updated easy dimming & daisy chain function, main light controlled, especially come with two waterproof and dimmable Mean Well Drivers, auto sensing power supply works on both 120VAC and 240VAC and 277VAC, suit for Large Rooms and Commercial Setups. Low Energy-Consuming LED Grow Light: Consuming 300w and also mounted with 1016 chips, TS3000 has the ability to replace a 450w HPS light while reducing 40% power intake. High Efficiency LED Grow Light: With overall light output PPF 343umol/S as well as amazing PPE 2.3 umol/j, it's 50% even more photon efficient and can assure a 30% more return than the old HPS/MH lights. Patent Highly-Reflective Hood Shape: The reflector design on TS3000 is patented, which can effectively gather the light dispersed in all directions to enhance its light intensity as well as assist plants in absorbing more light. Full Spectrum Plants Favorite Spectra: By the unique mix of spectra that makes most light in the 400-700nm waveband, incredibly conducive to plant photosynthesis. Adequate IR(730-740nm) is additionally consisted of in the range to generate larger buds. Dimming And Daisy Chain Feature Available: Upon an independent dimming button on the external driver, backing 0-100% settings adaptation and up to 30 LEDs daisy-chained in a group, it supplies different light levels for various plant stages meanwhile saving energy. Safety Certifications And Service Warranty: CE, ETL, RoHS, UKCA security certifications accepted, 50,000 hours durability, 5-year service warranty, and local after-sales repair 5x5 GROW TENT: LOCK ALL LIGHT INSIDE MARS HYDRO Indoor Grow Tent interior is made of diamond mylar which is highly reflective. (Other brand's mylar and reflective rate is as low as 50%, won't provide efficient light. )MARS HYDRO 1680D canvas, being double stitched, it is tear proof and has perfect light locking. Mars Hydro's grow tent keeps 100% lighting beams inside and helps your plant absorb more lights. EXTRA-THICK --No light leaks or rips at all DURABILITY GROW TENT Stable metal corner adapters and poles are the trustful supporters of the tent, standing sturdy, neither rusting nor paint-falling, quick easy tool-free installation. Mars Hydro's heavy-duty metal zippers, with double layer black lining, are the best on the market which create a light-proof seal EASY OBSERVATION FOR YOUR PLANTS. Special observation windows are made by double layers of cloth. Observe the growing conditions of your plants without opening the tent and avoid disturbing plants. The observation window also serves to dissipate heat and ventilate air AUTOMATIC 6 INCH EXHAUST FAN KIT W/ CONTROLLER: Mars Hydro 6'' Inline Fan uses a mixed-flow design to maintain peak performance in a high static pressure environment. GROW TENT FAN: MARS HYDRO inline fans are designed to ventilate hydroponic grow rooms, transfer heating/cooling, cool AV closets, and exhaust odors. EFFECTIVE VENTILATION: Variable speed controller for easy fan speed adjustment. Optimal ventilation for your planting. LOW NOISE LEVEL: Durable plastic fan housing and blades for extremely low noise(32dB-A); create a truly quiet growth environment. EASY INSTALLATION: Removable duct ends with locking tabs for quick removal and easy maintenance and a cord length of 4.9 feet for hassle-free setup. This grows tent fan with a controller for easy fan speed adjustment. BASIC PARAMETERS: Ventilation exhaust fan size: 6” | Dimensions: 315mm*225mm*210mm. | Weight: 2.7. | Airflow: 402CFM | Noise: 32dB-A | Bearings: Dual Ball. 
Processing
Likes
16
Share
I've increased the food. Fungus gnats are still there, they seem to go then return 😭 they love organic that's for sure
Likes
12
Share
These two are moving right along. Starting to show some great early flower stretch and one of which that has come back from the dead you could never tell right now. Did a water change this week to get the ppm back to a more normal number although this strain can handle whatever you give them this is not the case with their neighbors.
Likes
93
Share
@DrJones
Follow
It’s been another good week for this stinking lady. She’s doing good! I do think I gave her too much cal mag though so I stopped giving her any this week. I’m gonna let her fatten up a little more. I’ll start checking trichomes next week and when she’s ready she can start her final week on a pH’d mix of just water and flawless finish. That’s all for now, Have a great week growers
Likes
21
Share
Im finding these great fun to grow, training is very easy to do considering it the first time ive trained any plants
Likes
3
Share
Buena semana para todos!! Esta planta también surgió de un esqueje que intercambié. Al momento de recibirlo tenia 1 mes de vida y lo pasé a una maceta "Air Pots" de 10L. Tuvo 40 días de vegetación en esta maceta, se le hizo podas apicales y Supercrooping para regular su altura. Al día de la fecha (29/5) lleva 17 días florando. Está hermosa. Calculo que en 3 semanas más estará para corte. Saludos y buenos humos.
Likes
44
Share
@UKauto
Follow
All good here 👌🏻 Stretching nicely now. Still has short internodes too she should pack out lovely. Don't think I'll have any issues with any bananas anymore she's is all clear. No smell as of yet. Just that regular weedy hint. Used the sumo boost as a foliar spray aswell as root fed this week.