Likes
Comments
Share
@PapaTerps
Follow
Wizard Fuel - Wizard Trees Day 41 - I've watered her with 2L of RO tap water with nutrients, mixed in order and pH'd to 6.3. This week she has been moved into the flowering tent and is now on a 12 hour light schedule 👍🏻. She will remain in this state for the remainder of her lifecycle 🙏🏻 Because she is now in flower, I've added the bloom nutrients into her feed and I've also increased the watering to 2 liters per feed. As she is now in the stretching phase of flower, I will not be performing any training or defoliation on her for a couple of weeks, and not been touched since topping her just over a week ago. By the looks of it, she was eager to start her flowering phase, because she nearly doubled her size in the last 48 hours since starting the 12 hour schedule, hopefully she doesn't get too big 🤞🏻
Likes
19
Share
High. 🐸 Plants are growing fine. First pistils appeared on FD 15. That's all to report for this week, nothing to complain about, everything looks good so far. 💚 Stay green. 👨‍🌾🏻
Likes
16
Share
@GRow_M8s
Follow
* All plants had one feed last week with some PK soluble ( SODK one more feed this week). The rest of waterings are tap water with some microorganisms in. * No new deficiencies spotted (except stomper#1 & 2 from last week), PK gives us the last boost. * Buds progressing well with a lot of crystals, smells are medium and so glad about that, promising though after curing properly. * Lights at 35k - 40k Lux. * humidity 45% - 60%, temps 20C° - 25C°. * D53 --> Fixing the canopy with a bit more aggressive LST to all the plants, except the main stem of stomper #3 (the stressed one). * D56 -> Final day of week 8 and the most mature plant is the stomper#1 (the plant with the early LST and most affected by N toxicity in early stage. - Trichomes are looking like 10 days before harvest, letting the other 5 plants enjoy more light. Week 8 --> finished ✅
Likes
4
Share
@SAC87
Follow
Week 7: The SpiderFarmer SF4000 has arrived. It’s hanging at about 28” at 80% and the plants seem to be very happy. The spectrum is significantly “whiter” rather than the purple of my other lights. Heat is definitely manageable. Buds have chunked up over that last week. I did probably the last feeding as I’m coming up to day 56. Clones are rooted and planted for next round and trying to decide what to run for next round. Some strains are looking better than others but overall pretty nice. Happy Growing 🌱
Likes
7
Share
@Meksi2790
Follow
week 4 plants look nice slight nitrogen def pumped up the dosage on the nutes
Likes
21
Share
2024-05-09 Directly after the Photoshoot, i topped them. they had a super progress and you can watch them growing big steps every day. All will started Indoors under SANlight Flex 25, and move Outdoors. Only one Plant stays indoors, to see the performance under best Conditions because my Outdoor Garden is hard^^ So i started with letting them soak, and then the seeds will move under a humid Kitchensponge unil i see a sweet Taproot. then they will go into the Final Pot, filled with lovely TerraPreta mj mix the grow will be supported with Biotabs fertiliser Breeder Information Fatso GMO F1 Auto is a feminised hybrid strain that is the result of crossing two autoflowering strains, viz. Fatso Auto and Cotton Candy Auto. This Cali-derived, slightly sativa-leaning, easy to cultivate strain will please growers with its big yield, solid THC content and its sweet, candy and fuel palate. Fatso GMO F1 Auto will grow well both indoors and outdoors. It has an above-average resistance to mould but will still benefit from good ventilation, especially where humidity levels are quite high. Resistance to plant pests and other pathogens is excellent. While plants will remain quite short at around 100cm or less indoors, they can grow a little taller, reaching a height of 130cm, outdoors in open ground. The entire cycle is completed in a maximum of 75 days from germination through to harvest and although yields are said to be average this is still pretty impressive for an autoflowering strain. The combination of high resin production and high terpene levels make Fatso GMO F1 Auto a very good strain from which to make cannabis extracts. The terpene profile is sweet and funky with savoury scents of Skunk with pine and floral notes. The taste is like sweet candy with hints of fuel. THC production is high, reaching 24% while CBD is low. The effect is uplifting and well-balanced.
Processing
Likes
5
Share
@Saihtan
Follow
W9D1 12-14-2020 I thought Mama Mia looked thirsty however she only drank 3Lt 2 less than previous, she may be slowing down in drinking or I watered to soon TBD~~ White widow drank quite a bit today 4Lts I got to see her outside of the lights today and could see some of that Autumn foliage in the Natural light. Love, Saihtan
Likes
62
Share
@Roberts
Follow
Do-Si-dos auto is doing good. She got some defoliation and lst today. She is due for a solution change very soon. I will be switching her to the blooming nutrition at that time. She has shot out her first pistils. The next few weeks should be a lot of stretching. Nothing more to report at the moment. Thank you Zamnesia seeds, Athena, and Medic Grow. 🤜🏻🤛🏻🌱🌱🌱 Thank you grow diaries community for the 👇likes👇, follows, comments, and subscriptions on my YouTube channel👇. ❄️🌱🍻 Happy Growing 🌱🌱🌱 https://youtube.com/channel/UCAhN7yRzWLpcaRHhMIQ7X4g
Likes
5
Share
This plant seems to have grown much denser and better than my first plant. I just got the ac infinity ventilation setup with controller 69 for my 2x2, still trying to learn, hopefully grow #3 goes even better. Stay tuned
Likes
7
Share
Likes
21
Share
@WEEDOOR
Follow
My girl is almost ready for flushing, darknees period and harvest. The flowers look fantastic, frusty and full of tricoms. After the flushing I'm gonna put her in an 2 day of darknes and then harvest. In the final 2 week's I turned on my uva light at 20% power and total of 6 wats. For the first two days, the light work for between 1-3 hours and after that for 6 hours a day.
Likes
2
Share
The girls are doing well so far. Advanced nutrients in combination with the Lumatek Zeus 600W Pro 3.1 is a killer combo. Also the coco substrate is working well so far. I placed them in bigger pots today . 🌱
Likes
7
Share
11/15 - Day 43 - I've changed the light schedule on the timer from 20/4 to 18/6. I will be heading out of town for 10 days on December 25th and so I'll need to harvest and hang to dry by the 24th at the latest. I've read in a few forums that decreasing the lights on/lights off ratio can speed flower maturation on auto-flowers. The other growers also mentioned that the decrease in light also reduces yields, but on such a tight timeline I'd trade total yield for more fully ripened buds any day of the week. Would certainly be interested if anybody has experience/knowledge that contradicts what I've read. Plants stretched another 2 inches in the last 24 hours putting them 22 inches from the light. I still have room to raise my light another 2 inches, but if these girls stretch more than 6 more inches they'll be < 18 inches from the light which I'm assuming would cause light burn based on the research i've done on this 600W ViparSpectra reflector series. Here's hoping they don't stretch more than 6 inches from here. 11/17 Day 45 - Haircut day. Left a few fan leaves on the shorter/lower shoots, but took almost everything else. Tallest tops had stretched another 4 inches in the past 48 hours, and were 18 inches from the light. I raised the light the final 2 inches I had available, which places it back to 20 inches from the tallest bud sites. Hopefully the haircut I gave the plants slows down the stretch, but either way it looks like I'll have to do a lot of retraining before I head out of town tomorrow for 5 days. 11/18 Day 46 - Fed nutes. Cal mag + advanced nutrients (micro, grow, bloom), and MKP. 4 Litres of water per plant. A lot of runoff in the saucers, but I'm out of town for the next 5 days so I'm leaving it to be absorbed throughout the week.
Likes
4
Share
@FastBro
Follow
😶‍🌫️🤠😶‍🌫️😶‍🌫️😶‍🌫️😶‍🌫️😶‍🌫️😶‍🌫️🤠🤠🤠😶‍🌫️🤠😶‍🌫️
Likes
4
Share
This week went great again. They are getting heavy now and packing on the crystal. They smell soooo fckin good!
Likes
47
Share
I feel like this is week 7 of flowering not week 6 I think I may of missed a week at the beginning of flowering. I have been feeding her a 25l mixture of feed a week. 3.3 ltr a day. It has been taking this really well, been doing for 2 weeks now. Going to start my flush on 20/10 and also planing to drill her on the same day. Will take photos. She is really starting to fatten up now, can see them buds get bigger and bigger everyday!!! Still keeping the feeds up trying to get as much as I can in her!!!! Still keep the comments coming in!!!! Is she amazing or what!? Start the flush when!? When to harvested her!? Would love to know what everyone thinks!!!
Likes
19
Share
So now I have finally harvested my first hydro plant!! It was a pleasure. My partner and I were busy cutting the plant all Sunday. Everything is ready and it is now hanging! To grow: I'll keep it short. At the beginning I worked according to the individual cann thinning scheme. Halfway through the grow I started working with H2o2 because I couldn't maintain the temperatures in the water to avoid illness. The plant was grown like a photoperiod plant because I also had photos in the tent. The plant also suffered a nutrient burn during the flowering phase. I think I worked with the PK 13/14 too early. I'm happy that I was able to learn so much from the grow.
Likes
11
Share
My plant smells really strong :D