Likes
Comments
Share
@Franci5
Follow
This week everything was pretty normal. I increased the light intensity a little without necessarily lowering the LED. The plants have adapted very well and have a very good structure. I'm very happy with how everything has gone. They need watering more constantly, but I keep an eye on the weight of the mesh under the growing bed so that it doesn't dry out too much. With the care I've given them, the three plants have shown that they have a very high production capacity. Let's see how I do, haha 😅😅
Likes
37
Share
@Ferenc
Follow
All good flowering nicely , I needed to remove a lot of fan leaves from the top of the Gelato Sorbet they were yellowish and some kind of deficiency is there.
Likes
8
Share
2025-09-18 A lot happened since the last Update Yesterday i started the Autopot-System, and from now on just appreciating them no more work because of the " only- add-water-Strategy By Biotabs. i was cutting some lower leaves and shoots- and she got some supercropping. to spread her more and topping aswell 🔄 Transplanting Process 🏺Container Setup Container: 35L Smart Pots Growing Method: Autopot System with "Water-Only" strategy 🌿 Soil Preparation Base Mix Recipe: 5g per liter soil - Startrex 5g per liter soil - Silicium Flash Mixed thoroughly for optimal distribution 5x Fertilizer Tabs - strategically placed near bottom (20cm height) for autopot compatibility 1 tsp Mycotrex - applied directly in planting holes Bactrex solution - used for initial watering 🏗️ Layer Construction Bottom Layer (10cm): Drainage material (clay + perlite) Air Circulation: Airdomes positioned Growing Medium: Pre-mixed soil with embedded fertilizer tabs Root Zone: Mycotrex application + seedling placement Initial Watering: Bactrex solution ⚙️ System Activation ✅ Setup Complete - Autopot system now delivering automated water-only feeding From this point forward: Pure water automation via Autopot system 🙏 Acknowledgments & Partnerships Special Thanks: Biotabs - Premium nutrient solutions 🏭 Puraplants - Autopot system provider 💰 Exclusive Discount Codes 🌐 Puraplants (Hamburg, Germany) www.puraplants.de Code: GrowBigger → 10% OFF Biotabs Webshop biotabs.nl/en/shop Code: GDBT420 → 15% OFF
Likes
4
Share
Welp, I have overgrown my tent in the future 6 plants are the max for this 5x5, I did not expect this kind of growth from an auto flower Buds are putting on weight and the smell is coming in strong, sugar leaves are coming in nice and most of my stalks are getting hairy, never seen that on any of my plants Hoping I haven’t fucked myself making too many bud sites but we are just going to send it and see what happens
Likes
3
Share
She’s getting fat! Smells berry and gassy , gonna def be some good smoke. Gonna go 65 days I think 🍓🌲💨⛽️🤟🏻
Likes
47
Share
New week. 55-65 DLi. The dodecahedron is the only Platonic solid that has infinite numerical pathways. Might mean nothing to you yet, but its means infinity to me.
Likes
4
Share
This week was a fun one they started to really push out their pistils. And showing me they are loving life. I backed off the nutrients because of the burning. I also changed the cal-mag to mendencino flowering cal-mag which has no nitrogen.
Processing
Likes
1
Share
@Esebees
Follow
Cambiamos de fotoperiodo y las plantas rápido han pegado el cambio y ya sacan los primeros pelitos
Likes
37
Share
@Reyden
Follow
Questa è la prima settimana di fioritura per le 2 FF e direi che vanno alla grande! Sia la Gorilla Cookies che la Purple Lemonade si stanno dimostrando ottimi fenotipi e sono sicuro che produrranno ottimi boccioli, il super soil di dogma organics da alle piante tutto quello di cui hanno bisogno e io mi devo solo preoccupare di riempire i secchi di acqua e lasciare che il cloro si depositi sul fondo…questo è tutto per questa settimana, ci vediamo alla 2º di fioritura.
Likes
Comments
Share
Pure exotic you will ever find around the West coast. give us a try and testify budy. got Black Gorilla, Red Dragon, Sour Diesel, OG K, Kurupt Moonrock, Pineapple express and Green Gelato, Willing to ship. no games. 100% discreet and safety is guaranteed. text or call me 4087530672
Processing
Likes
4
Share
@Ledros
Follow
Day 29 (2020-06-07): Changed out reservoir (5.6 PH). Picked up some 3% H2O2 so added 3ml/gallon to help combat some of the growth I am getting. Also wiped down the outside of the fabric pots to kill the mold. Did some new LST and defoliation to even things out. CBD Crack is in pre-flower. The G14 might be a bit behind. Day 30 (2020-06-08): Reservoir PH around 5.65. Removed a leaf or two and did some tucking. Day 31 (2020-06-09): PH at 5.8. The G14 Blumat drip tube had gotten stuck in the dirt and was not dripping. Hand watered back to normal. Some slight LST adjustments to even things out and removed a few leaves. Day 32 (2020-06-10): PH at 5.96. Yellow leaf tips on newer growth haven't really gotten any better. I am also noticing some other yellow and brown spotting on older leaves. I am not as worried about the spotting since it is likely related to previous PH fluctuation that has been taken care of but I am now wondering if the yellow tips are something new. Maybe the start of nutrient burn? I do not believe it is light related since I adjusted this a few days ago. Day 33 (2020-06-11): After some helpful advice from the community I checked the calibration of my PH pen and found it off by about .5! This must have happened sometime in the last week or two but would explain the issues since as a result my PH was adjusted way to low (around 4.9 to 5). FIxed pen, flushed plants and changed out the reservoir. Hopefully things will get back on track. Also took the opportunity while I had the plants out to even out the LST and do some more defoliation. Day 34 (2020-06-12): Things are looking OK. I am not sure if the yellow on the tips will go away but it is not getting worse. Reservoir PH is at 5.75. Day 35 (2020-06-13): Res PH at 6.1 but slight smell. Probably will have to change out tomorrow. Things are looking good for the plants. G14 is definitely behind on flowering compared to the CBD.
Likes
6
Share
Venga familia que ya viene la cosecha de estas Lemon Mandarin de Fastbuds, que ganas que tenia ya de darles machetazo. Que locura de variedad , me encantó cultivarla , aún con la plaga de trips que sufrí aguantaron y sacaron unas flores alucinantes. Las flores aparte de piedras, se ven resinosas. a sido una genética con la que disfruté bastante, por el momento no puedo dar muchos más datos sobre este proyecto pero aquí resultados. Agrobeta: https://www.agrobeta.com/agrobetatiendaonline/36-abonos-canamo Mars hydro: Code discount: Eldruida https://www.mars-hydro.com/ Hasta aquí es todo , espero que lo disfrutéis, buenos humos 💨💨.
Likes
42
Share
WEEK 5 - both ladies are stretching, no issue so far pleasure to grow 9L Pot I started notice pre flowering stage 12L Pot the is getting bigger but still in veg stage
Likes
9
Share
Heute habe ich beschlossen, meinen ersten Anbauversuch durch Abschneiden der Pflanzen zu beenden. Obwohl es mein erster Grow war, konnte ich viel über diese faszinierende Pflanze lernen, auch wenn der Ertrag eher gering ausfiel. Ich habe keineswegs vor aufzugeben. Nach meinem Umzug und den damit verbundenen Veränderungen plane ich, erneut zu starten – diesmal mit einer besseren Ausrüstung und einem größeren Zelt, um mein neues Hobby weiter zu vertiefen. Ich bin wirklich dankbar für die Community, die ich hier gefunden habe, und bin beeindruckt von eurer Aktivität. Viele Grüße, Pascal.
Likes
6
Share
Processing
Likes
4
Share
@Andres
Follow
she grows healthy ... she is in her last weeks outdoor ... the days are cloudy most of the day ... with the substrate made by me .. she feeds every 10 days with red guano and earthworm humus
Likes
24
Share
*****Week 15 growth – March 13 to 19, 2021 – Week 6 flower ****** Feeding has ended this week and we are in flush mode now. The girls have just started to slow down their drinking and pistols are changing colour, buds are swelling, they are getting ready to finish. Added the UV and IR light bars in this week. Started the week with just one bar and then both in place by end of week. Each bar has 10 x 730nm, 10 x 395nm, 6 x 660nm pulling 30 watts each. Trichome enhancers!! Working with the new light this run I have certainly pushed them with more light intensity than they should have received, broke 1100 PAR for a bit. This has also started to cause some foxtails to begin rather than staying compact and swelling the buds. Know for next time……always changes to make 😊 Little more detail….. Mar 13/21, Day 36 - Feed day with full line of Innovating Plant Products but at ¾ strength. - Keeping up the feeding but thinking about nitrogen levels and working on reducing. - feeding with grow – 0.5, micro – 1.5, bloom – 2.5, ult B – 0.5, carbs – 0.75, B Storm – 2, S Storm – 3, Terp – 3, Jet Fuel – 1.5, Rezin 1 - 1300ppm and 6.2pH - GSCHB – 3L - Added in the first UV bar today Mar 14/21, Day 37 - Seeing lots of swelling these days from the girls. - Microbe feeding today…….possibly last round of microbes. - Plain tap water with Recharge @ ½ tsp/gal and Natures Candy @ 1.5ml - 400ppm and 6.1pH - 3L all around today…..very little run off. Mar 15/21, Day 38 - Another feed day today. Last week of feed so pushing them a little more. No Grow added! Last couple of feeds with CalMag as well, seeing some magnesium issues so giving last dose. - feeding with micro – 1.5, bloom – 2.5, ult B – 0.5, carbs – 1, B Storm – 2.5, S Storm – 3, Terp – 3, Jet Fuel – 1.5, MagNifiCal – 1.5ml - 1175ppm and 6.0pH - GSCHB – 3L Mar 16/21, Day 39 - Just giving the basic building blocks at this stage. Most of the supplements not added this feeding. - feeding with Grow – 0.5, micro – 1.5, bloom – 2, carbs – 1, Rezin – 1.5ml, MagNifiCal – 0.5ml - 875ppm and 6.0pH - GSCHB – 2.5L Mar 17/21, Day 40 - Last Feed Day……calling it at day 40 this run!!!!! - 4L of feed water left from yesterday so added in 12L of RO water to keep the ppm down. - Left over plus Rezin @ 2ml, Overdrive @ 2ml (its hard to let go of your routines…I have been using Overdrive for so long……it feels wrong to not be using it this run….snuck in a couple ml😊) - 485ppm and 6.0pH – GSCHB - 2.5L - Light power pushed back up to 525 watts……..keeping the intensity up to hit the lower bud sites….will see what happens to the uppers. Mar 18/21, Day 41 - Starting flush but not hitting the pots with 12 gallons of water each type of flush! Will just drop the ppm down to nothing and use RO water……planning on having close to 3 weeks to flush….second guessing that I really have that long though so may actually end up adding a flushing agent to the girls…..decide in the next 4 days so can leave plain water time if I do. - Watering with Enzymes @ 2ml…….clean up the roots and help them get more of the ppm out of the media. - 100ppm and 5.9pH……..missed the pH but not adding both up and down, ran with this. - GSCHB - 3L - Light power pulled back down 480 watts Mar 19/21, Day 42 - Dry out day today. Will be letting the pots get dryer now before adding more moisture. - Leaving them for today though. Give flushing agent in next 2 days if going to. - Work down the light intensity more in next couple of days as well. - UV lights going now for 3 hours per day on both fixtures at the middle of the light schedule.