Day 78 - Starting week 12 and tonight is her last night night and she’ll get the axe tomorrow. She’s sitting at about 30-35% amber and looking forward to her finishing up and trying this one. Day 79 - She’s all chopped up and into the drying box for the next 7-10 days. She was a beauty and ended up with 357 grams of wet bud. I’ll finalize the harvest when she’s dried and ready for cure.

BPP started the fourth week showing potential, the plant is thick, vigorous, I start to regret not having put it in a bigger pot. On the 25th day I applied my homemade FAA in the morning, 2ml/L. On the 27th day the cultivation of up to 6 female marijuana plants was decriminalized in Brazil, as well as the possession of up to 40g 🙌 On the 28th day I made a new mixture of soil with bone meal, dolomitic limestone and bokashi, I used some perlite for the aeration too.

So on 12/14/21 opened tent to find leaves trying to get away from light, TS 3000 is a powerful light, at 24 inches from top of plants at 25% power it caused leaf folding. Adjusted light to 36 inches and dimmed light to 20%. Leaves are turning a darker shade of green and started praying again. Lesson learned know your light or get a watt meter cause 25% was close to 120 watts of LED. 12/15/21watered plants 100ml of water, except one which was still moist. Noticed green coming back strong now the lights at the right height.12/17/21 Plants fully recovered from my light. Looking vibrant green again.12/18/21 Nutrients fed. 12/19/21 plants are growing vigorously now that the conditions are right on.

Week 3 / flowering The stretch is going very well, with numerous tops developing. I’m feeding with a combination of two different nutrient brands; we’ll see the results. The light is at 100% since the temperature is ideal ! Repotting : 23/04/2026 12/12 swtich:15/04/2026 Background : Strawberry Lemonade ≈ 15l-20l x2 Middle : Amensia Lemon 11l x2 Front : Cherry Mc Muffin 7l / Oreoz : 11l Topping : 01/05/2026 Light : 60cm-75cm / 75-100% dimmer 24-26 degrees / 30-40 % hygro 22-24 degrees Watering is light at this stage — around 1l;1,5;2l depend pot size ( 1. watering humic ; 2. if plants show excess signs(1) if not, 3. watering with fertilizers flower )700-1000 ppm calmag 1/2 watering

On my next round I am going to make sure that I make additional soil when I start a grow so I can keep topping the soil off to take advantage of all the root barbs popi g out

Hello! All plants have entered the active flowering phase (the left one is slightly behind), and have practically stopped in height. I like how the purple phenotype turned out, I will continue to monitor😎 Thank you for stopping by, and be healthy! 🙏 To be continued... 😶

Light burn/nute surplus damaged a lot of my fan leaves but the actual buds are looking fairly nice. I just got a mini microscope to check trichomes and I’m flushing for these next couple weeks. Big shout out to everyone who helped on my grow questions! I learned a lot from them and I’m even more excited for my next grow now.

So much rain and simply no sun this week. But it looks good. The buds coule be more dense but this is the risk of outdoor. The smell is intense, sweet, earty... The hairs are mostly orange but the trichomes do nit look ready at all I will start flushing this week. No more nutirents

Day 10 of flower

Partial reset on this girl who is obviously stunted and struggling. Not all strains are created equal and experience combined with skill goes a long way. So, taking my lumps with this girl. So, long story short, I reduced the ppm by draining and replacing 2.5 gallons of ph'd RO w/cal-mag added. This resulted in bringing down the ppm to roughly 500 w/ph at around 5.6. Will continue to monitor ph, ppm, and water levels for the remainder of this week looking for stabilization. At that point, I will gradually raise the ppm levels. If she doesn't make it back before TKO is ready to flip, I may need to scrap her given limited space. Come on girl, let's go... Midweek 4 update: Well, time has come for a decision. I moved the PBCRbx over to the 3x3 grow tent, so I can continue to care for her. Clear case of too much nutrients (high ppm levels) that have stunted early stage veg growth. Tried monitoring and adjusting ph twice a day but ppm remained higher than range resulting in fan leave tips looking burnt. Also some nutrient lock out occurring. Given ppm remaining high and water level dropping, I decided it was time to do a complete flush. Emptied and thoroughly cleaned bucket, air stone, and air line exposed in bucket. RO water with cal-mag and nutrients ph'd to 5.5 w/ppms at roughly 625. A day after flushing, the PBCRbx is looking a lot better. As a back up, I am running a separate PBCRbx by Ethos in a 3 gal fabric of coco peat, which is doing very well.

Rosin 1st class

📆 Semana 2: Esta semana pasada hice lavado de sales que arrastraba el coco de fábrica, es la primera vez que cultivo en este medio y daba EC de 10 🤢 Una vez estabilizada la EC, aplico riegos suaves hasta que la planta demande más. Ya se aprecia un olor a naranja 😍. Seguimos creciendo fuerte 💪

day 11 from germination 5 litres to the pots with different ph between 6.2-6.5 with 0.5 MLG bio grow for litr. day 12 from germination its my bad day I noticed that my plants are very stretched and Fragile; compared to their peers that I saw on the site, are very behind. I think the reason is that I got a 110 watt Amazon lamp, put it 100 cm away and gave them a lot of fertilizer and water. To solve this problem, I ordered a spider sf 1000 and i gathered the soil of pots from the side and poured it around the stem (And I brought the air to 20 c°, which I do not know is correct or not). Current situation: Plants are giving new leaves and I see a tendency to grow in them. My question is, are my plants very backward for 12 day after germination? Do you think that if plants are not going to grow enough and their start flowering quickly when their are still small plants, it is not better to throw these away and plant new seeds? Does it cause the amount of yield to decrease?Or I still have a chance to fix it? There is a way to increase their growth period? After I buried the stems and changed their height from 14cm to 8cm, can the stems have new roots? And that now a few cm empty flowerpots do the roots have enough space to grow according to the photos? Thank you very much for your help. day14: Today is the 14th day and the last day of the second week. Today I installed the fan and ventilation and a new lamp arrived Spider Farmer sf1000. Very high humidity, someone can help me. And that there is a way to grow four plants with this lamp? Do not miss today's video.

Week 5 - 08/27 Seedsman - Critical + 2.0 Blimburn - Apple Fritter All running smoothly, Introduced the exhale C02 bag last week thus far no issues or signs of deficiencies. Light defo - Heavy feed to start the week (Nutes) *Mid-Week Update* Week 1 -Early Flower* 08/30 Both have grown significantly since last update, Flowering has begun. Introduced Raw NPK (Potash/Phosphorus) *End of week recap* 09/02 39-40 inches in height Week 1 of flower went smoothly Introduced Raw NPK Phosphorus and Potassium

Pink Wafers! Day 16 Building up a nice root system at the minute and will start topping and Training over the next week or so. Had a bit of stretch but got that under control and will root pot very soon aswell ✌️🏻🇬🇧🏴󠁧󠁢󠁥󠁮󠁧󠁿

Well i ran into some problems, water temps too high over the weekend (i wasn't there) but roots and plant still looked healthy despise 24,5°C water temp over 2 days. I added 2,5ml each Hydro A & B on day 15. EC rised to 0,89 / PPM 445 and two days later ppm still the same i guess because the only part of the root touching the water couldn't uptake any nutes because of the high water temp? (everything above the water looks healthy af tho) Since my apartment is usually really hot in the summer i bought a TEC peltier water cooler + pump and a thermo regulator to ensure the water temps will stay between 20 and 21°C. i just need to wire that up and diy saved me me a lot of money. i payed about 100€ and have automatic temperature control and a cooler from amazon about 200+ € so i think its fine. I'll show you the set up once it's completed and works. Its the best budget cooling i could get my hands on imo. Today is Day 19 my parts came and i really managed it to half ass wire shit and not burning down something. wish me luck. I payed a total of 93,22€ and now got a really quiet, 150w DIY Peltier/TEC) cooler that automatically turns on once the water temp hits 21°C (69,8F) and stops when hitting 20°C. So far its working REALLY well. like im amazed and so proud i managed to do that and it was pretty easy. i had big problems with temps in my attic flat and water temps quickly rising to 24° and more which means root rot. Since i use the cooler all new roots just looking healthy as fuck. the plant is growing well and i see every day progress. So i saved a shit ton of money. the cheapest water cooler i could find on amazon was around 350+€. Sure it bet it works better, is safer to touch, not very likely to cause burning down my house because i had to twist copper wires together and let 230V run trough it BUT no way i have that much money for things like that. The cooler cools water temps from 21,5° to 20° in about 15minutes. the longer it runs the better it cools. i bought a temperature controller outlet ( 25€) which let me set 2 temps and it turning the cooler on and off. I had to cool it down manually every 2 hours before with frozen water bottles💀 So here are the stats for day 19: Water Temps: 20-21°C / pH: 5.42 / PPM: 485 / EC: 0.96 / height: 2,5cm (lol) (i added some more Hydro A and B because i thought i maybe see some nitrogen deficiency) i bet i will see some RAPID growth now since everything is dialed in, hopefully lol 150g im coming!

one is flushing, the otehr ill start next week Starting the flush with DragonForce Sunday 5/1/20