This strain was perfect for my first grow was resistant asf even in the 38 degree heat these plants showed little stress. I’ve learned a lot during this grow and decide to go with this strain again for my next, The smell of my harvest isn’t that strong bud the high is. Smell is really nice and the taste 🤤 gave some to a friend who say “ it fruitier than Alan carr” but yeah have nothing bad to say about bpp and will be one of my go toos for now on

Growing nicely, I'm excited for a high CBD and THC strain combination. It's supposed to be a good strain well-balanced medical strain with less stoney effects but still a pain & mood management, hopeful it'll work for me.

Starting to take shape for the main branches cut at 3 nodes

I gave Isopropyl alcohol 70% equal parts water, 1 tsp cayenne, and kept enough for multiday application, what little population of aphids is left I shall catch them the next morning, opening the tent 10 min before lights on the clovers have yet to open, all the aphids hiding on undersides are easily visible, still none ever went near cannabis plant. Clovers are far tastier it seems. The alcohol kills on contact, the idea was to saturate the leaves with a light foliar application, and once I was done I ran it through the canopy with my hands making sure as much of the clover surface came in contact with the iso, once done turned on the fans and evaporate it quickly. Beautiful thing about Isopropyl is that it evaporates rapidly at room temperature way below boiling point leaving behind zero residual so nothing seeps its way into rootzones unless you spill it there. It is a magical solvent that leaves no trace that it was ever there. Resonant Frequency: A resonant frequency is the natural vibrating frequency of an object and is denoted as ‘f’ with a subscript zero (f0). When an object is in equilibrium with acting forces and can keep vibrating for a long time under perfect conditions, this phenomenon is resonance. In our daily life example of a resonant frequency is a pendulum. If we pull back the pendulum and leave, it will swing out and return at its resonant frequency. Objects combine to form a system, this system can have more than one resonance frequency. The resonant frequency is termed as the resonance frequency. The phenomena of resonant frequency used in the series circuit when the inductive reactance (XL) is equal to the capacitive reactance (XC). If the value of supply frequency is changed, we can observe that the value inductive reactance (XL) and capacitive reactance (XC) is also changed. Inductive reactance (XL) and capacitive reactance (XC) are inversely proportional to each other. When we increase the frequency, the value of XL increases, whereas the value of XC decreases. When we decrease the frequency, the value of XL decreases whereas the value of XC increases. At series resonance, when XL = XC. The mathematical equation of resonant frequency is: XL = 2πfL; XC = 1/2πfC XL = XC 2π f0L = 1/ 2πf0C ; f0=1/2π sqrt{LC} Where f0 is the resonant frequency, L is the inductance, C is the capacitance How to Calculate the Resonant Frequency of an Object? An object exposed to its resonant frequency can vibrate in symphony with the sound. The wavefronts pushing on the object will arrive at just the right time to push the object with greater and greater amplitude in each cycle. To get a clear idea of this concept one of the best examples is pushing a friend on a swing. If you push the swing randomly, the swing will not move very well but if you push the swing at a specific time, the swing will get higher and higher. Another example to find the resonant frequencies is to place the object next to a speaker and place a microphone attached to an oscilloscope next to the object. Then play the sound in the speaker at a given volume, and then without changing the volume slowly change the frequency. Now observe the oscilloscope, you will observe that at certain frequencies the amplitude of the wave, is proportional to the volume of the sound that the microphone is able to pick up. The frequency that is caught by the microphone will be greater than at surrounding frequencies. These are the resonant frequencies and are detectable as the sound energy absorbed by the object is re-emitted more efficiently at these frequencies. The precise moment that constructive interference happens the amplitude of the wave will spike at the precise frequency emitted. Q: Compute the resonant frequency of a circuit whose inductance is 25mH and capacitance is 5mu F? A: Known values are, L = 25mH = 25 x 10-3 H C = 5mu F = 5 x 10-6 F Formula for resonant frequency is, f0= 1/2π sqrt{LC}1/2π√L f0=1/2 ͯ 3.14√ (25 ͯ 10-3 ͯ 5 ͯ 10-6) = 450.384Hz Why Neodymium? Ferromagnetism is an exciting phenomenon observed in certain materials, known as ferromagnetic materials, that can retain their magnetization even after removing an external magnetic field. Ferromagnetic materials can become ferromagnets and interact strongly with other magnets and magnetic fields. A characteristic of ferromagnetic materials is their magnetization ability, distinguishing them from paramagnetic and diamagnetic materials, where weak magnetism exists temporarily. This unique property allows for making permanent magnets widely used in various applications such as motors, generators, speakers, and data storage devices. The ability to generate and maintain a magnetic field without the need for a constant external source of power makes ferromagnets highly valuable. An alloy of neodymium, iron, and boron discovered in the 1980s is ferromagnetic, yielding permanent magnets over 1000 times stronger than anything ever seen before. The name neodymium comes from the Greek neos didumous, which means "new twin." Neodymium magnets are made of an alloy of neodymium, boron, and iron. This allows them to simultaneously store impressive amounts of magnetic energy while being highly resistant to demagnetization. Because iron oxidizes quickly, neodymium magnets are coated to prevent rust from accumulating. The attraction between two neodymium magnets is so strong that if placed close enough together, they can collide and shatter. Neodymium magnets have an unusually high-temperature resistance, and they can even withstand heat exceeding 200 degrees Celsius. N50UH 1-1/2"OD x 1.065"ID x 3/8"

Well decided to plant the northern lights auto, this one’s a fast mover. Only soaked 18 hours before the tail popped. Only using fox farms ocean to start the first few weeks.

Sponsored by: 🦎THE HIGH CHAMELEON🦎-💡VIPARSPECTRA💡-💐GREEN BUZZ LIQUIDS💐-🛠️WEDRYER🛠️ 30/9 Maybe I should start a guide on how NOT to grow marijuana .... First step: don't leave 20 plants in 40x60 centimeters of space for a whole month. Second step: Don't give nutrients randomly just to make them survive. step three: avoid giving birth to a dog at home (if your house is very small). Otherwise you find yourself with plants like this: malnourished, yellow and ready to die. Solution? Immediate racking and flowering. Time one week and it will be as good as new! Obviously all is not lost, quite the contrary. The High Chameleon's genetics prove to be extremely strong and resilient! But don't mistreat them like I did !!!! a clone was taken to preserve the plant, waiting for the final result. And without wasting any more time, I now decant by adding a little Green Buzz Nutrients living organics and moving it into flowering. Yeah! __________________________________________ Personal advertising (contains affiliate links) __________________________________________ 🦄 Check out The High Chamaleon website, their first selection criterion is the strong signature of terpenes by taking rare strains while being 100% organic and respecting nature. Safe anonymous shipping! ✅ https://bit.ly/TheHighChameleon __________________________________________ Did you know that Green Buzz Liquids fertilizers are 100% vegan? A complete line of products ready to give the best to each of your plants! Visit the site and see my journals to see how they work 🦄 🤯 And with the code "dreamit" you will immediately receive a 15% discount on your purchases ✅https: //bit.ly/GreenBuzzLiquidsPro __________________________________________ 👀 Are you looking for a good lamp to start with? 👀 🌞Viparspectra has something more than the others, take a look at their site. ⏩ Use "GDVIP" for an extra discount or "DREAMIT3" for an extra 5 %% discount 👀 Search for it on Amazon ✅Amazon USA: https://amzn.to/30xSTVq ✅Amazon Canada: https://amzn.to/38udUVe ✅Viparspectra UE: bit.ly/ViparspectraUE ✅Viparspectra USA: bit.ly/ViparspectraUS ______________________________________________ 🌈 Tired of blowing on your weed hoping it dries quickly? Check out the Wedryer website! You will find a well-made accessory that will help your weed dry in just 8-10 days without the annoying risk of finding mold or other annoyances! (no affiliate links) ✅https: //bit.ly/Wedryer_ ______________________________________________ 📷🥇Follow the best photos on Instagram 🥇📷 https://www.instagram.com/dreamit420/ Backup https://www.instagram.com/dreamit4200/ 🔻🔻Leave a comment with your opinion if you pass by here🔻🔻 🤟🦄💚 Thank you and good growth 💚🦄🤟

Another strong week here. The blumats are working well at this point so the girls get adequate water intake. They continue to develop and the fade has now started. Will be looking to chop some of them next week.

What’s up yall!!?? Week 6 and we got some serious buds growing in. Some of the sites that I thought wouldn’t produce actually surprised me. I haven’t changed much with this grow. I think the flush I did worked well and the plant seemed to react in a positive way. Trellis net and some LST just to get light down to the lower sites seem to have worked. No real change in nutrient and feeding. I do feed every watering so there I no skipping. I still use the General Hydroponics flora series and some cal mag. That’s literally all! See y’all in week 7

--------------------------------- 📅 WEEK 3 --------------------------------- 💧 22.04.2024 - new pots (6L) 💧 30.04.2024 - watering* (300 ml/pot) 💧 04.05.2024 - watering* (500 ml/pot) *(plain tab water) --------------------------------- 💡 light is 40cm+ away, dimmed to 50% --------------------------------- 📰 NOTES All three went to new pots (6 Liter) at monday 22.04.24. This week later are doing way better! The soil (All-Mix) was prepared and watered well - so the plants we're not watered for a week - but looking much better now and start growing compared to the weeks before. Number three looks strange, first leaves almost died. Maybe mutating? But i"ll giver here a chance, since there ist still space in the box --------------------------------- from munich with 💚 ---------------------------------

Sorry not many pics this time

This is a strain that is very easy to grow and resistant, after the fourth week it sticks a lug, and does not need a lot of vitamins, it grew with only 13 and 12 hours of light and went through cloudy days and a lot of humidity

Never ever put an autoflower and a photoperiod in the same grow box. The harvest was fantastic despite my mistake. I have to admit that the Sativa gave me a lot more pleasure than the Skunk as well as a superior final yield. 100% satisfied. Thanks Sensi Seeds.

Light off for 72 hours and screw into the plant stem at the same time

Another week of veg for our Fast Version B from super sativa seeds club. At the beginning of the week we gave some bactrex and orgatrex from biotabs. The plant is evolving good! Nice and green

Fruity aroma all over. This run came out better than i expected even though she took some abuse. Drying with herbnow dryer.

buenl gente esta semana cortare la chocolate haze qe tuvimos en exterior por problemas en el kndor (temp) , se nos quedo enanas pero se ven muuuy resinosas estas bellezas.

20.05.24 I flushed as of today 23.05.24 Day 119 Bloom 60 - today is harvest day

Última semana antes del corte solo un riego con agua 💦