Processing
Likes
11
Share
This bugger neatly drank 3L of the solution I had prepared for three weeks!! there some serious growth happening. Defoliation was a good idea at this point to reduce the amount of wasted nutrients and increase the flowering priority. Had to share the last "video" to show my appreciation in learning about LST here on growdiaries, those are pepper plants.
Likes
14
Share
She is cover all in buds nice little green monster. She will stretch in next week by few more centimetres
Likes
11
Share
The ice dream cake plant takes the cake. Pun intended. This plant has such a crazy smell to it and I love it. I cant stop cracking the jar to get a wiff lol love growing different strains and comparing them. This plant grew much differently than the jealousy plan. Definitely stretched more during the stretching phase but didn't bulk up as much as the jealousy plant. The buds are coated in trichomes and the resin is oozing out of them. I will post a Pic of after I press both plants with the nug smasher. Should get some high quality resin. Overall great grow and looking forward to the next one. Thanks for following!
Processing
Likes
17
Share
1/14: All 3 are looking great! This morning, I did a foliar application of big bloom and fulvic acid, then about 5 hours later I watered them with about a half-gallon of rainwater each and added armor si, humic acid, endoboost myco/tricho, liquid molasses, and a bunch of cal-mag. Today, I also I wired up and mounted my new samsung sun board strips (660nm/730nm) and my Solacure FlowerPower UVB fixture. I'm running the deep red/far red bud boosters a few hours per day right now, but will run them for the entire photoperiod once I start flowering them. I'll run the UVB for 4 * 15-minute sessions a day for the full flowering cycle, and if they don't protest too much I'll increase each session by 5 minutes and evaluate again. Some strains are more forgiving than others and I've got 5 different strains in this space...so really not sure much time I'll get away with exposing them to the deadly rays without damaging them too much...😈 1/15: I received one of the rapid led/growmau far red initiator pucks today. With the placement of my UVB light, I'm realizing I'll need another far red puck to have even and intense far red coverage, so I'm ordering another with Prime delivery and waiting to start flowering until I receive it. I sprayed them down really well with ph adjusted rainwater tonight to rinse off nutrient build-up from foliar applications. 1/16: I'm really excited to try flowering under 14/10. I grew photos indoors on an off for 15 years before I semi-retired. If I added up all the additional flowering time I could have done through the years if LED technology existed, I'd have had an extra truckload of bud to smoke. I did another application of Axiom Harpin a|b Proteins this evening, right before dark. I'm expecting a big growth burst this week, leading up to the flower stretch. I really need them to trigger under 14/10 within 4 or 5 days🙏 ...if not, I'll switch to 13/11 and wait a few more days🙏😟..if still no pistils are poppin, I'll go to 12/12 and chalk it up as bad luck or varietal indifference to Pr and Pfr manipulation. 1/17: I fed each of them about 3/4 gallon of full strength veg nutes. This will be the last. I'll go with half-strength veg and half-strength bloom for a week, then go with full strength bloom nutrients until I start flushing them in 6-8 weeks. 1/18: I installed the second far-red flowering initiator today and got all my timers configured for flowering: ========================================= timer#1 - power strip with qb's and red boosters 10:00am -12:00am timer#2 - (dual/independent setting) sideA- 3-way cube with uva bars 10am - 3pm 7pm - 11pm sideB- flowerpower uvb 1pm - 1:15pm 4pm - 4:15pm 7pm - 7:15pm 11pm - 11:15pm timer#3 - far red pucks 11:00pm - 12:15am timer#4 - sub-canopy tube 10am - 1pm 3pm - 6pm 8pm - 11pm ======================================== I also did some testing on the timers and sealed myself into the closet to check for any light leaks. All good.👌 1/19: Tonight is their first long night. It's ON!👍 1/20: I watered them today with about a half gallon each. I'm seeing calcium and magnesium deficiencies here and there, so added some boomerang and heavy cal-mag-Fe along with liquid molasses, humic acid, and endoboost myco. I also foliar fed with big bloom and fulvic acid. That's it for week 4-
Likes
6
Share
@Bluemels
Follow
Tag 45: Ich beginne mit dem Scroggen der Pflanze, ich habe dafür das Netz eingebaut und etwas entlaubt. Doch die Cookie Gelato sieht nicht mehr so Vital aus , vermutlich war die Lampe etwas zu dicht, zur Stressbehandlung gebe ich jetzt noch Alg a mic in das Gießwasser. Ich hoffe sie erholt sich noch 😱
Likes
13
Share
@CBDezz
Follow
Growing these ladies was great and super easy. I ran into a problem early on from not using the correct PH when watering and they bounced back nicely. Seed to harvest in 10 weeks probably could have went another week.
Likes
10
Share
Everything is moving smooth with all of the plant except lots o bear by fox genetics it popped and just never grew so I’m planting the 3rd seed and if it doesn’t work I’m going to sub for purple punch auto
Likes
16
Share
Gracias al equipo de Sweet Seeds, Marshydro, XpertNutrients y Trolmaster, sin ellos esto no sería posible. 💐🍁: Big Devil Fast Version: Atendiendo a las peticiones de nuestros amigos y clientes, presentamos la versión feminizada y fotodependiente de nuestra apreciada variedad Big Devil Auto (SWS15). Para el desarrollo de esta variedad utilizamos nuestras mejores cepas seleccionadas de Big Devil Auto. Hemos eliminado el carácter autofloreciente de la Big Devil Auto hibridando estas cepas seleccionadas con un clon élite de características muy semejantes a la Big Devil Auto original. El resultado es una planta muy vigorosa, de gran porte y de muy alta producción, con cogollos muy densos y repletos de resina. Desarrolla un fuerte tallo principal y largas ramas laterales. Conserva el aroma y sabor de nuestra Big Devil Auto original, muy dulce e inciensado. 💡TS-3000 + TS-1000: se usaran dos de las lámparas de la serie TS de Marshydro, para cubrir todas las necesidades de las plantas durante el ciclo de cultivo, uso las dos lámparas en floracion para llegar a toda la carpa de 1.50 x 1.50 x 1.80. https://marshydro.eu/products/mars-hydro-ts-3000-led-grow-light/ 🏠 : Marshydro 1.50 x 1.50 x 1.80, carpa 100% estanca con ventanas laterales para llegar a todos los lugares durante el grow https://marshydro.eu/products/diy-150x150x200cm-grow-tent-kit 🌬️💨 Marshydro 6inch + filtro carbon para evitar olores indeseables. https://marshydro.eu/products/ifresh-smart-6inch-filter-kits/ 💻 Trolmaster Tent-X TCS-1 como controlador de luz, optimiza tu cultivo con la última tecnología del mercado, desde donde puedes controlar todos los parametros. https://www.trolmaster.com/Products/Details/TCS-1 🍣🍦🌴 Xpert Nutrients es una empresa especializada en la producción y comercialización de fertilizantes líquidos y tierras, que garantizan excelentes cosechas y un crecimiento activo para sus plantas durante todas las fases de cultivo. Consigue aqui tus Nutrientes: https://xpertnutrients.com/es/shop/ 📆 Semana 5: Comienzan a formarse los cogollos, las hojas se llenan de resina cada dia y el olor es bastante fuerte. Parece que ha terminado de estirar. Practico una defoliación intensa para airear los futuros cogollos y dejar mas espacio en el cuarto de cultivo. Agrupo de nuevo las macetas en su lugar optimo para asi rellenar por completo la carpa @marshydro. Me quedé algo corto de nutrientes pero estoy muy contento con los resultados, cada vez le voy encontrando mas su punto optimo. Siempre es mejor quedarse corto que pasarse.
Likes
19
Share
@BB_US
Follow
Ladies are looking fabulous and getting frosty. The smells of sweet skunk is in the air
Likes
11
Share
Solid week with good growth. Thinking about doing some lst later this week.
Processing
Likes
4
Share
Off and running with some flowers starting to show up and swell. Had some nutrient deficiencies I had to address but looks like all is dialed in now. Started using Fish Shit and some Grow Big to help with deficiencies and this seems to have helped, but I will continue to monitor and update. 🌱🤙
Likes
6
Share
Entrando a la 7ma semana de floracion por suerte pude combatir el oidio de forma cacera con esponjita y jabón potásico. Tambien hice foliar con tricodermas y previo un foliar con agua oxigenada lo cual la planta se lo tomó bien y pude controlar el hongo antes de que me agarre los cogollos, bueno súper feliz con los resultados que estoy teniendo 100% orgánico hay cosas que mejorar si pero para eso estamos para aprender y ayudarnos entre todos , espero les guste luego de este post se viene la cosecha así que atentos! En 15ltr individuales dos esquejes de darth haze (bubbakush pre 98 x Lebron haze) de @bsfseed Espero les guste y le den like! Vamos arriba cultivetas y buenos humos 💚🙏🌱💨💨
Likes
1
Share
defoliated just 5 biggest leaves from the very bottom of the plant
Likes
11
Share
Hi guys! For this run i got some nice looking clones. Really looking forward for this one. 11x Gelato Sorbet (Dna Genetics) left side in the box 13x Cookies&Cream (Exotic Genetics) middle of the box 8x French Macarron (T.H. Seeds) right side of the box My setup got a nice update with the Sanlight Evo 5 100 with 320w. Aim to upgrade all of my S1 Q6w soon. All together with 985watt now. I use Biobizz-Lightmix and started to add Nutrients at week 3 after i planted it in the 8l pots. For this run ill use Hesi Nutrients because i use them for years and worked most of the time pretty well for me. I fimmed some plants and trained most of them with LST-Training. I will send them into flower in the middle of week 5 ---‐------------------------- Week 4: Plants are looking ok. I wanted a higher humidity and tried to increase it with a humidifier. Week 5: The fimming worked quite well on the plants i used it on and i got a nice increase in height and strength Aiming to send them into flower in the next few days. :) Week 6: Day 3 of Flowering plants look nice and healthy. Some gelato sorbets had issues from stress but they catched up ok. Week 7: End of week 2 of flowering plants look ok most of them. After i saw some nice results at tents from friends and had some own nice experience with the terpinator i start giving "purpinator" this run a go and start mixing it into my feeding schedule every watering Hope u like the diarie and follow with this run!
Likes
20
Share
Vamos familia, actualizamos la novena semana de floración de estas Lemon Cherry Runtz de FastBuds. La temperatura que estuvo entre los 24-25 grados y humedad dentro de los rangos correctos. En cuanto a las plantas las veo verde sano, estiraron bien y ensancharon bastante también. Ya desde esta semana ya van solo agua para limpiar bien las plantas. Hay que reivindicar que en este indoor no tengo ni plagas ni problemas. Las flores acaban madurando bastante bien, por el momento todo correcto, os dejé también alguna novedad y un cambio en la sala, agradecer al equipo de Mars hydro por el nuevo TSW2000. (los últimos 5 años cultive solo con los leds de esta marca) los cuales probé, TS600, TS1000, TS3000, TSL2000. - os dejo por aquí un CÓDIGO: Eldruida Descuento para la tienda de MARS HYDRO. https://www.mars-hydro.com Hasta aquí todo, Buenos humos 💨💨💨
Likes
5
Share
I'm doing an organic soil grow using Purple Cow Organics for the substrate. For germination and seedling phase, I'm using their Seed Starter mix. Once they are ready to focus on vegetative growth, I will transplant them into 5 gallon fabric AutoPots using Purple Cow's Indicanja soil. This is a "water only" soil that I will be attempting to use without feeding much additional nutrients, except for Bloom City Cal-Mag, since I will be using RO water. My tent has CO2 enrichment, so I will be using ~25% higher DLI levels starting at week 2 or 3 than are typical for photoperiod grows. I will adjust as necessary based on how the plants react. #2 and #3 emerged from soil after 2 days (August 22). #1 and 4 took two extra days to be fully emerged with open cotyledons (August 24). During germination, I had VPD set to 0.5 kPa. PPFD was 200 and DLI was around 13, with an 18 hour light cycle. CO2 levels are between 1000-1400 ppm. I included a video showing and explaining my AutoPot and AirDome setup and my general plans for this first grow.
Likes
4
Share
@nijuana
Follow
I had the same problem with the nutrients you can very see this problem on the gorilla and specially the killer Kush ones with just one of the little apricot but the 2 big plants have nothing, I think it's an excess
Likes
6
Share
@MxGrow
Follow
<Frisian Duck🦆> Se inicia germinacion de 3 semillas. ▪️︎El día 7 de Nov 22 en un recipiente con agua purificada.. ▪️︎El día 8 de Nov se colocan en toallas húmedas. ▪️︎ El día 10 de Nov 22 se coloca 1 semilla que germino en sustrato. ▪️︎ El día 12 Nov 22 ya creciendo.
Likes
16
Share
This grow turned out to be quite a journey. Originally, this run was meant to be a simple between-grow project, something to keep the season going outdoors, without too much effort. But plans changed, and the Orange Sherbet ended up in the tent, where it took a completely different direction than expected. She grew big and strong early on, but the LST was tricky. she didn’t respond very well at first, and shaping her the way I wanted took a lot of time and patience. It was interesting to see how she stretched and filled out later, but overall, the structure stayed somewhat awkward to manage. Throughout the grow I struggled with CalMag and potassium balance. I tried several adjustments, sometimes with high CalMag doses, but it never fully stabilized. It’s still unclear if that came from the strain itself or from the BioBizz line, but it made the mid-to-late phase more difficult than I had hoped. The flowering time was also much longer than advertised. the breeder mentions around 9 weeks, but in reality this one took closer to 14–15 weeks total. What was supposed to be a quick side project turned into a long, demanding run. On the bright side, she delivered a very solid yield. a bit over 160 g of trimmed buds plus another 50 g of popcorn, well above 1 g/W. The aroma is lovely after 10 days of curing: creamy, with vanilla and a subtle orange note returning. However, the buds are airy, not as dense as I hoped. The effect and flavor are great, but visually it’s more on the average side. Even so, this grow was one of the most instructive I’ve done. I learned a lot about deficiency management, humidity control, watering and how far genetics and environment interact. Going forward, I’ll take a break from autos and focus on photoperiod strains again. I just prefer the control and predictability they offer. All in all: not my prettiest grow, but a very valuable one. About drying in dry ferm/dry age and regular drying: the material in the bags took a few days longer to dry which is said to be good (regular dry was 7 days, bags was 9 or 10). initially I think the buds from bags look better but now in curing I can't really tell a difference, not visually and not in the nose. Let's see how everything evolves over time but honestly I am not expecting it to differ a lot from regular drying.