Pretty basic week. I transplanted the Green Tea plant from a Jiffy Pot to a 1 gallon fabric pot. The plant probably could have stayed in the Jiffy Pot for another week or so but some of my plants that were a little bigger when I transplanted them were packed with roots. I just figured I'd transplant a bit earlier to give my roots more space sooner.

Smell is starting to increase

4/15- Her bud sites are becoming very big and the white pistils are REALLY coming out. I hope she’s done stretching 🤞🏻 Had to move the lighting all the way to the top bar of the tent. She’s now 12 inches from the light. Seeing those spots again on some leaves. I gave her 4ml of calmag instead of 3.13. I’m hoping the calmag will help and the plant enzymes. Gave her a little hair cut ✂️

By now I also cut the second Apple strudel so just papaya cookies and banana purple punch are left now, in the meantime the other are drying slowly, the guava is ready for trimming and curing. I’m very curious about the quantity from each plant now. Happy growing!

Week 4 middle floração and they are looking beautiful….

This is the first grow im am using trainingmethods... i really have no clue if i am doing it right with the LST, if you guys have any advice for LST or Topping at my plants, please leave a comment.... And yeah maybe someone knows why the lower leafs at the OGs are lookin like this Greetz

just a wet papertowel in a plastic bag for one day then after one day into a germination type of thin from rqs 5x Fat banana Auto Left side 3x Bubble Kush Auto Right Side

Week 2 off flower. Topped dressed with buildaflower Bokashi

Hello growmies 👩‍🌾👨‍🌾🌲🌲, 👋 Girls keep stretching, #1 doing big stems with hedgehogs, water only this week. 💪 Just let Grow, will do a defoliation in the next week. 💧 Give water each 2/3 day 2 l Water Only PH @6 💡Mars Hydro - FC 3000 50% - 28 cm Mars Hydro Fan kit Setting 8 Have a good week and see you next week 👋 Thanks community for follow, likes, comments, always a pleasure 👩‍🌾👨‍🌾❤️🌲 Mars Hydro - Smart FC3000 300W Samsung LM301B LED Grow Light💡💡 https://www.mars-hydro.com/fc-3000-samsung-lm301b-led-grow-light Mars Hydro - 6 Inch Inline Fan And Carbon Filter Combo With Thermostat Controller 💨💨 https://www.mars-hydro.com/6-inch-inline-duct-fan-and-carbon-filter-combo-with-thermostat-controller Fast Buds - GG4 Sherbet FF🌲🌲 https://2fast4buds.com/us/seeds/gg4-sherbet-fast-flowering

📅 D29 - 12/09 📜 Entering in the 4th week of vegetation, almost ready for preflowering. Today I made a big defolation and tied up the main branches with LST. Focus strongly on res as it has a strange behavior (EC falling and pH static). If tomorrow will be again like this, I will completely change the water and I will set a lower EC. T and H are now under control. ✍️ 1,3 EC ♒ 5,5 pH 🌊 9,5 L (added 1 L) 📏 9 cm 📅 D30 - 13/09 📜 Today I made a big defolation, cutting all the branches not interesting. Sadly I cut also one of main branch by mistake. Too bad, I'm very upset. Added 1,5 L of water with EC = 1,43 and pH = 5,8. ✍️ 1,29 EC ♒ 5,8 pH 🌊 10 L (added 1 L) 📏 9 cm 📅 D31 - 14/09 📜 I made some LST in order to cover the space of the broken stem and leave more space to the other branches. Today I not feed her, waiting for tomorrowv to add 1,5 L. Lucy is almost ready for SCROG. I think she will start soon, for sure this week. The res EC and pH seems stable now. T and H are under strict control. ✍️ 1,29 EC ♒ 5,8 pH 🌊 10 L (added 1 L) 📏 9 cm 📅 D32 - 15/09 📜 I start ScrOG training today. Tommorow I will change the res as I don't like how pH and EC are moving. pH tester is broken again, I purchase a professional one for a lot of money. I hope this will do his job for long time. ✍️ 1,2 EC ♒ 6 pH 🌊 8,5 L (added 1 L) 📏 11 cm 📅 D33 - 16/09 📜 Big News: Lucy starts preflowering. A little bit earlier than my tought but I think I can manage, as she looks great right now. I also changed the res, pushing the EC until 1,45 and turned on the flowering lights.The ScroG Net is working fine, I guess. Update: T is really too high (now near 36 °C) as I turn on the bloom lights. I'm trying to fix the problem in a creative way: I put some dry ice just in front of area injector and T lowered a little. H is in between 70% - 85%. ✍️ 1,4 EC ♒ 6 pH 🌊 10 L (new res) 📏 15 cm 📅 D34 - 17/09 📜 Lucy in ple flowering stage and the buds are starting grow very fast. The ScrOG net works good until now. I've some problem with the Temp, cause it's always around 35 °C that is too much.. I need to keep the H in between 75% - 85% to balance such high Temp but it's quite difficult. The reason of such high T is because I turned on the bloom lights. Also, today I had a strange beahavior of pH that is decreasing. Now I fix it on 5,5 but I've to be prepared to change res again. Made also some defolation. ✍️ 1 EC ♒ 5,6 pH 🌊 9 L 📏 15 cm 📅 D35 - 18/09 📜 Last day of fouth week and last of vegetation. Today pH gone again down 5,5. I added 1 L. of water with normal nuts, pH+ and also GHE Pro Bloom, raising both pH and EC. I will change the res on monday, as soon as I will have affordable measuring tools. SCroG seems working very well and Lucy looks healty. ✍️ 1 EC ♒ 5,8 pH 🌊 9,5 L 📏 15 cm

***Sponsored Grow*** = Medic || https://medicgrow.com || Grow = ***Sponsored Grow*** Still have some issues with the feed and this pineapple dream, they are getting some burning in the sides on some of the larger fan leaves, I would say it could have been over feeding but the runoff is not that bad, and I would expect more burning on the other plants as well. Its smell has changed a bit as well, its not as fruity as it was earlier on or its diluted by all the other smells in the tent, might be a sign I am giving them to much water at a time as well. Still giving them a 2:1 or 2.5:1 grow vs bloom nutrient. Its helping with some of the pink stems from last week. Feeding strength is up .2 point to reach 900ppm or aorund 1.8EC will leave it here fro the remainder of Veg. Prob will do for 2 more weeks then flip to flower as I just topped them and want to give them some time to recover. NPK ratio of 7-7-14 1:1 equal parts grow/bloom. Grow=8-4-15 Bloom=6-10-14 Boost=1-15-30 "not yet used it yet" Also took some clones from the plants as well, took two main cuttings from each plant, forgot to do the one so its not shown in the first video up the updated clone pics later in the week. If any of these impress me then the clones will go outside and grow there all year for a extra special harvest. Or I'll give them out to some friends and family maybe a little gorilla gardening project, but I will wait before getting ride of them all as I'm still kicking my self in the ass over the Blue Cindy loss. really liked that plant and wish its clones I gave out where still aorund. Lights doing well. The V1 spectrum is good on the medic grow mini sun-2's 240w. No issues so far, dimmed at 80% till flower is initiated then up to 100%, Will test out 13/11 I think as the schedule to give them some more photons for an extra hour vs 12/12 . Till next week. ***Sponsored Grow*** Official Website: https://medicgrow.com/ + https://www.kannabia.com/en Facebook: https://www.facebook.com/medicgrowled + https://www.facebook.com/kannabiaseed/ Twitter: https://twitter.com/medicgrow + https://twitter.com/kannabiaseeds Instagram: https://www.instagram.com/medicgrow420/ + https://www.instagram.com/kannabiaseedsint YouTube: https://www.youtube.com/channel/UCNmiY4F9z94u-8eGj7R1CSQ + https://www.youtube.com/c/KannabiaSeedCompany Growdiaries: https://growdiaries.com/grower/medicgrowled https://growdiaries.com/grow-lights/medic-grow + https://growdiaries.com/grower/kannabia https://growdiaries.com/seedbank/kannabia

A big hello to all the cannabis growing gardeners...and all the other visitors that came across my grow journal. This week i need to change the reservoir again, the plants drink solution just as I add fresh water the EC stays at 2.7 and i need to add PK and Calmag so that's why. The weather outside is very cold this whole week around -18 degree Celsius at night...this made my reservoir water go under 15 degree Celsius. Since i ran the Spider Farmer UV lights i noticed some purples on my cannabis plants i think it's their doing....i run it now for two weeks the UVs ---------------------------------------------------------------------------------- The SE 7000 is hanged at 28 cm. over the canopy and runs at 520W. This whole grow's main sponsor is Spider Farmer. You can easily obtain all the great grow equipment we use at: spider-farmer.com A big thank you to Jessie and the whole Spider Farmer crew for supporting me with the newest technological advancements in horticulture. Thanks to them what i do here is possible. Thank you Seeds Mafia for giving me the opportunity to try out your stock. seedsmafia.com/en/feminized-cannabis-seeds/moby-dick-feminized.html Plagron did send us their Contest package for the Power Buds competition . Thank you for your visit, please leave a like and hope to see you beck here in about a week.

Всем привет. Я назвал этот дневник "Old tree" и это не просто так, этому кусту 13 месяцев! Также интересный факт это растение уже дало урожай после чего я решил оставить 30% от растения, обрезать ему корни и пересадить в горшок поменьше после чего отправил его на вегетацию 18/6 и оно начало вегетировать. Также с этого растения мне получилось взять много хороших клонов, но теперь старушке пора на пенсию ее работа выполнена! Надеюсь это будет интересно.

Flowers week 10 Flush week

Going Strong!

Hey folks, I'm finally back at it again. It took me a while for a couple of reasons: 1) I usually only grow in the winter. 2) I completely revamped my grow room after the issues I ran into with the last setup. 3) It took me a while to brainstorm exactly what I wanted to do. I bought these seeds from D.C. Seeds and was very pleased with the experience. I'm very happy to give business to a fellow American and Veteran. I've only ever purchased seeds from the UK in the past and that experience has been "dodgy" to say the least (not the vendors fault, but the transit). I've only ever grown photo's, but chose to go with all auto's moving forward. After calculating the intensity of my current light, with it being on a 20/4 rotation I'm very close to hitting 40 moles per day, at least directly under the light. It doesn't quite cover my 2' x 5' trellis. I'll eventually upgrade my light, but auto's should get me the best bang for my buck with this light. Also, I spent a pretty penny building this new grow room. The other obvious reason for growing auto's is their shorter seed to harvest time. I've got a small grow area, and never plan on expanding. Theoretically, auto's will allow me to produce the most out of my room. A few things about my grow room: 1) I lined the whole closet with 1/2" plywood and put that piece of ply the air intake/outtake/power as the divider between each side of the closet 2) The grow room itself has ply on all wall surfaces so I could mount stuff to it and paint it 3) The other side of the closet is my storage/prep/power distribution/etc. area. Maybe I'll take a pic one of these days 4) My last grow my carbon filter/fan was venting into the other side of the closet. This created a headache for a number of reasons. I tapped a 4" hole through the floor and am now venting into my crawl space below the house. 5) I moved to bubbleponics to speed up my grows even more. I will be removing the drip system once the roots hit the water in the res. 6) The larger res. will hopefully make my life much easier. Late in the last grow I could only fit 3 gallons of water in the bucket and that sucker was pounding down at least a gallon a day. That required too much micro-managing for me (both ph and refills). 7) I no longer have a fixed trellis with chicken wire. The trellis is held in place by dowels that I can pull out by hand. The short sides of the trellis have hinges on the bottom, so I can fold it and pull it out easy-mode. Lastly, I'll be using string for the trellis so come harvest all I have to do is cut the string instead of dealing with trying not to destroy buds pulling them through chicken wire (it takes forever). 8) I built a light diffuser on the other side of the air intake 9) My res. is on a motorcycle lift I'm using a drill to move up and down I have now started using Jack's as my primary nutes. They tell you the full break-down of each macro and micro nute, giving me more control and understanding. I think House & Garden is a good product, but when stuff goes bad it's more difficult to troubleshoot when you have no idea what each piece of their full lineup contains. I'm assuming it's kind of a proprietary type thing, which I understand, but knowledge is power. I am still using their Drip Clean (while the bubbler is going) and Roots Excelurator Silver, both excellent products. I'm still using Hydroguard, and will FOREVER. I'm a true believer now of why Hydroguard is necessary for any hydro application, IMO. I also purchased water soluble fulvic acid, but have decided not to use it for this grow....or at least while the bubbler is going (I'll elaborate below). Ok...now that all that is out of the way.... I really wanted to use my well water instead of R/O to make my life easier. Soooo....I filled up my res., and put two seeds in the system immediately. Nothing happened after 1 1/2 weeks. I finally opened up the cubes and saw that the beans had popped, but it looked like maybe I drowned them, or they ddin't grow straight up or something. For round two, I didn't change the water out, and decided to soak the beans for 24 hours in R/O water first. I had the exact same problem. I'm still not really sure what happend, but I suspect it was the well water. My PPMs were sitting at ~500 with the well water, which was probably too spicy for the beans just starting. Also, my well water is questionable (even though it's at 165ppm), but I won't elaborate further....it's a long ass story and I've spent an absurd amount of money on it. Lastly, I did put the Fulvic acid in, and it was very messy. I really want to avoid having to clean my res. Once the roots get big it will be a real pain in the ass to clean. I'm leaning towards not using the Fulvic acid this grow just to see how things go. I had 10 beans total of the Sour Apple and have already ruined 4. So here's hoping third times the charm. So, I went back to my tried and true method: 0) R/O water for everything. Ditching the well water idea. 1) Soak beans in R/O water for 24 hours 2) Paper towel method between plates on a heating mat 3) Once the roots pop, I place them pointed down in the hole of the rockwool cube 4) Hand water once a day by dipping the cube in the pre-mix of 1/4 strength Jack's and everything else I've listed above. This put my PPMs at 300...a way more reasonable value for starts. It's been exactly 7 days since I followed the above. It's probably hard to see but the cotyledons came up, and multiple roots have come out the bottom of the cubes....way faster than I've ever seen since I started growing. That means even though I'm doing my old process this already shaved at least a week off of when I'd normally put it in my bucket in the past.

~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_ 👊😺Woo-Hoo!! About half way there!! everything is going fantastic in this tent! (wish i could say the same for all of them😿)..The SP-3000 is crushing it again! Their nodes are spaced perfectly for fat buds, they start stacking super low, we would normally get light colored growth down there with our old LEDs, this is definitely penetrating deeper..We're still feeding with every watering but one standout will be getting just water this week (too dark)..we removed a few more large fans from the tops but nothing drastic...temps are much better since firing up a 2nd 390CFM for the far tent.. all 3 tents pump thru 6" host to a single 8" hose out a window, the ambient temps of the room are much warmer than the inside of the tents with that much air moving.. thanks @Asnoriu for confirming we wont be hurting much running full time with some negative pressure this summer..We're counting on these "Fast" strains to go about 8 weeks but time will tell.. not too much else to report, its been a breeze this week...thanks as always for dropping by and happy harvests friends!! ⚡Mars Hydro/SP-3000⚡ Specifications ⚙️: Diodes: Samsung LM301B / Osram 660nm (960 total!) Driver: Meanwell 300watt 🔌 (300W±5% @AC120V-277V) PPF: 824umol/S ☢️ PPE: 2.8 µmol/j 〰️〰️ Lifespan: 50k+ hrs ⌛ Weight: 10.1 lbs (4.6kg) Veg Coverage: 3 x 5 ft 🌱 Flowering Coverage: 2 x 4 ft 🌼 -The SP-3000 uses an aluminum heatsink (no fan) and the driver can be placed outside the tent 🌡️⬇️ -IP65 waterproof ratings, tolerant to high humidity grow environments 💦 .. -Up to 15 can be daisy-chained together and all controlled from a single light! 💡~💡~💡~💡~💡 ~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_

This smell ... sweet, very sweet, like sweets, lemon smell slightly noticeable at the very beginning, but when you touched her... on your fingers start to appear sticky and rich smell of juicy lemon. It is unbelievable that my babie can smell and look so great. I just can't wait... :D

Did a bit more LST but the branches are very woody so won't bend much. Steady as she goes.