Bilder sagen mehr als tausend Worte ☘️☘️☘️☘️😊😊😊 Hello GROWBUDDYS!!! Wir sind jetzt bei Woche 9 angekommen und ich muss sagen das ich wirklich begeistert bin! Ist das dass sogenannte Cali Weed? Wirklich saftig wie die Ladys aussehen. Man sieht das es zwei verschiedene Phenos sind. Pheno 1 Ich denke high yielder mit einer sehr Grasigen note Pheno 2 mein top Favorite, es riecht sehr nach süßer Traubenschokolade , echt der Hammer. So ein Weed habe ich noch nie gerochen und dieser Zuckerbelag mit purple! Pheno 2 Wird grade gespühlt deshalb oben bei Düngerangabe Final Solution Wtf that's real bud porn!

This was my first ever grow ive done and I think I did great achieving 3.75 oz in a dr90

Showed early signs of vigor.

🍉🎂🌈🍬

💩Holy Crap We Are Back💩 Well i took the summer off to do some outdoor but thats all done so , we are back indoors and at it again 😁 So super happy to be trying this one out , can't wait😝 .....Let's see if we can get the best cherry 🍒 terps as possiable ..👍 Seed soaked for 24 then placed in a tub with paper towels , once it cracked and rooted , placed into its main pot 👌 Lights being readjusted and chart updated .........👍rain water to be used entire growth👈 👉I used NutriNPK for nutrients for my grows and welcome anyone to give them a try .👈 👉 www.nutrinpk.com 👈 NutriNPK Cal MAG 14-0-14 NutriNPK Grow 28-14-14 NutriNPK Bloom 8-20-30 NutriNPK Bloom Booster 0-52-34 I GOT MULTIPLE DIARIES ON THE GO 😱 please check them out 😎 👉THANKS FOR TAKING THE TIME TO GO OVER MY DIARIES 👈

The cannabis strain Grape Guava can be a purple strain, depending on its specific phenotype and genetic makeup. While not all phenotypes of Grape Guava are purple, some variations, such as the Zatix Grape Guava, are noted for their striking purple appearance due to the genetic expression of anthocyanin pigments. https://www.youtube.com/watch?v=cKdVmdoKJ5k In a garden of green, Grape Guava gleams, With its fruity aroma, enchanting dreams. Clusters of grapes, guava's sweetness ignite, A strain so divine, in purple and white. Euphoria whispers, a lush fruity haze, Grape Guava's embrace, a tranquil daze. Off and away.@1400ppm. The increased CO2 allows plants to thrive at higher temperatures, which in turn necessitates higher humidity to maintain the ideal VPD for healthy growth and transpiration. 80F -5F = 75F LST with 70% RH = 0.72 kPa. Higher temperatures and humidity promote rapid growth, nutrient uptake, and photosynthesis while maintaining a lower stress level. Temperature influences the rate of enzymatic reactions involved in aerobic respiration. Enzymes, such as those involved in glycolysis, the Krebs cycle, and the electron transport chain, work most efficiently at an optimal temperature range. In low temperatures, enzymatic activity will slow down, thus reducing the rate of aerobic respiration. In high temperatures, enzymes can become denatured, thus impairing their function and stopping the process of aerobic respiration. Glucose is the primary fuel for aerobic respiration. The rate of aerobic respiration increases with the availability of glucose, as it is the starting point for glycolysis. If glucose levels are low, cells may rely on alternative energy sources such as fatty acids or amino acids , but these processes may yield less ATP or be less efficient. To determine this effect, carbon dioxide volume was measured (as carbon dioxide is an output of aerobic respiration) 18/6 with the 6 being IR. The near infrared (IR-a) borders around 700nm up to 1400nm @ photon par flux density of 1.8 instead of darkness, keeping temps overnight a neat 77F-80F. Think of my tent as a lung. What goes in must come out. When the rate of air going out exceeds the amount of air coming in, it creates a negative pressure. Tent concaves (bends in). If set up correctly, your RH will begin to drop slowly to the desired level you set, and the extraction turns off when it reaches desired% RH. The plant, as it performs cellular respiration, will always be releasing more water into the air, so the RH% of the tent overnight will always increase, so long as oxidative phosphorylation is occurring. As soon as the RH% creeps back up to 55%, the extraction turns back on, over and over. This creates a strong pressure differential which will work wonders on your grow. Replicating high and low-pressure fronts in nature. Critical for oxygen diffusion at the critical time of peak cellular respiratory function.. Moisture will not transfer from a saturated atmosphere to another if that air is already at or above its saturation point, meaning the air can't hold any more water vapor. Once I understood that water is produced as a by product during cellular respiration, specifically at the very end of the electron transport chain (ETC) where electrons are finally transferred to molecular oxygen, the higher the RH of the air, the more resistance there is for more moisture to be added to that environment, and effects the ease with which it does so. But none of that water comes from the pot; it's pulled from the air. If you run high daytime RH, your medium/pot is 100% reliant on transpirational root pull to move water. ZERO evaporation happens across the atmosphere if the tent air has high RH%, the medium cannot release its water through evaporation. Once a canopy develops, light no longer slowly wicks and evaporates from the topsoil. The Soil-Plant-Atmosphere Continuum (SPAC) describes the continuous pathway and process of water movement, driven by a gradient in water potential, from the soil, through the plant's roots, stem, and leaves, and finally evaporating into the atmosphere through transpiration. There is evaporation, there is transpiration, and then there is evapotranspiration; Evapotranspiration (ET) is the combined total of two processes: evaporation (water lost directly from soil and surface water into the atmosphere) and transpiration (water released from plants to the atmosphere through their leaves). Evapotranspiration represents the total amount of water that moves from the medium into the air. There is no such thing as a medium with too much water, only a medium that retains too much for too long. The water must always flow efficiently from one atmosphere(Medium) to another(Air) in a timely manner. Moisture is a critical factor for bacterial growth and decay. Dictating how long it's allowed to sit in any one location for any given period is a key preferred control. To ensure a net reduction in a bacterial population, the rate of removal (ET) must exceed the rate of bacterial growth (decay rate), which is often modeled as a growth rate for the specific bacterium under the given conditions. By optimizing daytime VPD, we also optimize conditions for bacterial growth to explode exponentially above 77°F.. If water is allowed to sit in a medium without an escape within a timeframe, nothing good will happen. IF High RH is maintained overnight as well as during the day, placing 100% of water movement at the behest of daytime transpiration, roots can only pull where they can reach, and if soil is compressed above a certain point, moisture will become trapped in a medium with no way of moving day or night. This will begin the countdown for decay to take hold. When water stagnates in a medium, it loses oxygen, creating anaerobic conditions that foster the growth of harmful microorganisms like bacteria and fungi, which can produce toxins and disease vectors. Thigmomorphogenesis, the process by which plants respond to mechanical stimuli like touch by altering their growth and development, results in significant morphological changes to improve survival against mechanical perturbations. This complex response involves sensing touch and initiating physiological and genetic responses, leading to changes in form and structure over days or weeks. The process is triggered by physical forces such as wind, rain, or touch. Plants adapt to these stimuli by changing their shape and structure, which may include slower growth, thickened stems, or altered leaf development. Plants possess sophisticated mechanisms to detect even subtle mechanical stimuli and initiate responses. A variety of molecules, including calcium ions, jasmonates, ethylene, and nitric oxide, are involved in signaling these mechanical inputs. Touch can induce the expression of genes that encode proteins for calcium sensing, cell wall modification, and defense mechanisms. A plant exposed to constant wind may become shorter and sturdier. A plant that is touched frequently might grow more slowly to conserve energy and develop thicker cell walls. These changes increase a plant's resilience and ability to survive in harsh environments. Let's get Thiggy with it.

3rd week of flower completed. They got a lollipop cut and a bit defoliation. Besides that I increased the light a bit to 950-1000 umol/m2/s, that’s a DLI of 41-43 mol/day. Nutrients got adjusted a bit. This week was overall a bit more chill because they stopped stretching so hard. I expect still a stretch but it shouldn’t be that much any more. Flowers start to build up more and more and there are already quite a lot of trichomes. At the moment I will push the plant regarding to light and the overall environment. But later on I will go for terp and trichome preservation and will lower the temps. Starting warm and getting colder to the end. Right now I aim for a VPD of 1.5-1.55 kpa. Let’s see how week 4 turns out. Conditions of the Grow: 💡 PPFD: 1000 umol/m2/s ☀️ DLI: 43 mol/day 🌓 Lightcycle: 12/12 h 💨 Humidity: 47-52 % 🌡️ 🌞Daytime Temp.: 23-24 *C 🌡️ 🌙Nighttime Temp.: 19-20 *C 🌡️🌱Leaf Temperature: 21 *C 🌡️💧Water Temperature: 19-20 *C Water TDS: 1100ppm | EC: 2200us/cm 🚰Watersource: Rainwater (TDS: 15ppm | EC: 0.03 us/cm Vegetation Equipment: 🔦 Lamp: Mars Hydro FC-E6500 📤Container: 3x DIY 63L Euro-Box with lid Pot: Netpot 2 inch 💦Pump: M.R.S. Ultimate Whisper Powerpump 22 bar 🚿Nozzles: 12x 0.3mm 🫧Waterfilter: 150 microns 🌬️Fan: 3x Clipfan 🌪️Duct-Fan: AC Infinity 200 mm with Controller and Carbon Filter 🍶Nutrient Brand: Terra Aquatica 🔬Sensors: Waterstation (EC, TDS, Temp, PH, Salt), CO2, Air Temp. & Humidity (VPD), Temperature-Sensor Root Container

So this week is the start of flower !! Woooohooo finally get to show what I'm made of ! Step one ) take all the big fan leaves Step two ) establish a "light line" and take all small shoots that are unable to get the proper amount of light due to their distance from the top of the canopy. * These are the places we all wish would grow ! These are also the places that are at risk of - hermaphroditism - mold - waste of energy for the plant. ** These are also some of the best places to take clones ** Continue to tie and secure everything in preparation of massize buds ! I hope some people looked at this like " This took way too much off " I took ALOT. Yes I push , I push hard to know how much they can take . Yes I would say 60% of plants DO NOT like a massive defoliating. But, the ones who do , you will unlock a yeild like never seen . It's the risk we take . One thing I have noticed is when I'm gonna defoli , I don't combone high stress or toping + a bunch of other techniques . Should have some pretty huge plants by two months ! Thanks for stopping by more notes and pictures to follow . First week of flower was a great success!!! Unfortunately I did have covid this week so my pictures weren't exactly where I would want them . For these genetics, it's crazy , they haven't been topped or LST'd and yet they are growing flat at the top ! *** I did have covid this week so my pictures weren't exactly up to par. So I'll do my.best to make it up with notes , - this week very little flower stretch that is definitely a plus for people who want medium sized bushy plants . Not saying that this one won't stretch but so far there has been very little stretching . - there are ALOT of nice shoots throughout the canopy, plenty of places to take clones *** this genetic clones very well so that is another thing to note ! So great clonability . The end of week one I have seen very little stretching , in my opinion these could all be considered S1 . It interesting, even with no topping or training these plants NATURALLY grow FLAT! so for all you Screeners out there this is a primal genetic for that !!! In to week two !!! Here We Go !!! -------------------------- Find these world class genetics at : https://www.exoticseed.eu/products/exotic-animal#:~:text=What%20is%20Exotic%20Seed's%20Exotic,be%20cultivated%20indoors%20and%20outdoors. Or https://www.seedsman.com/eu_en/exotic-animal-feminised-seeds Find all about the nutrients that fuel this grow on here:. https://diablonutrients.com/ Absolutely a life-changing nutrient company for me really brought my game to the next level.

Tiene unos cogollos bien duros y compactos,son muy pegajosos y los pistilos son de un naranja radioactivo,tiene un aroma muy rico como terroso y mentolado

Hi everyone 😁 Welcome back in another week update! Thank you all for this amazing support on this bananas journey💚💚💚 Uploading and updating each week content on daily bassis so please revisit this diary if week not over yet. So far all going great. Girls looking very healthy and happy. Due to my short trip had to leave my 🍌💜👊 girls unsupervised for 3 days. Was stunned when opened my cabinet on the Dec 5th. Athena stretched like crazy. Good 3 inches. She better slow down as not much roof space left for her. May tie some taller branches to netting if necessary. Introducing blooming nutes for the first time this week on December 6th at smaller dosage and on the second watering as listed. Week 8 Dec 4 - Dec 10 Dec 5 Leaves tucking Dec 6 Heavier selective defoliation on both girls. Athena fully lolipopped and Xena at 75%. Watered with 8 ltr beetwen both with perfect runoofs PH 6.4. Girls were very thirsty 🤤 Dec 7-8 Just enjoying how my girls developing. Frost has landed and they are start showing colours. All is looking great. Dec 9 Second watering for this week 7 ltr beetwen both. Runoffs PH 6.4 Even with so much difrence in size of my 🍌💜👊 girls it seems that they are drinking my juice almost equally. Dec 10 Applied selective defoliation and tied 3 tallest branches of Athena to netting to avoid any potential burns on these beautiful baby colas. It's the end of the week! Thank you all again for such a great support, all the likes, dm's, comments and follows 💚💜💚💜 Stay tuned for coming week update 😁✌️💚

8 week finish this run

Plant starts off slower than others. But once she’s in flower and starts packing on resin and changing colors, everything changes. The plant reeks of funky terps and citrus and just stinky goodness. The colors are crazy ranging from pink to blue and purple. Highly recommend this strain and she produces super fat sticky buds. She’s a keeper.

Day 66 : Her buds are full of crystals and are so dense. The smell is really strong stinky skunk like GZ , but GZ smell is more acidic. Her crystals are milky and soon will start to amber. Breeder refers that will be pretty mature in 70 days. Not in my case :D we will see in 4 days, in next watering. For now no ambers. I prefer to cut when we have 15%-20% amber and 80%-85% milky, because after the smoke is very heavy for my taste. Edit Day 70 : She watered with juices and i continue until i see first signs of amber trichomes. Still no ambers. She has gained so much weight , side branches cant lift their self. I think she will be the heavier. You can understand her weight if u lift it.

Vamos familia, actualizamos la séptima semana de floración de estas Permanent maker de Seedstockers. La temperatura que estuvo entre los 24-25 grados y humedad dentro de los rangos correctos. En cuanto a las plantas pues estas últimas semanas cogimos un poco de trips y pues ahí ando combatiendo con planchas pegajosas de color azul, estiraron bien y ensancharon bastante también. Las flores se están llenas de tricomas y van madurando, aún con la plaga, por el momento todo correcto, aportamos mega pk y thor de Agrobeta, que será la última semana en aportarlos. Hasta aquí todo lo de esta semana , ya queda nada, buenos humos. - os dejo por aquí un CÓDIGO: Eldruida Descuento para la tienda de MARS HYDRO. https://www.mars-hydro.com Hasta aquí todo, Buenos humos 💨💨💨

plants are looking great, nice and thick and growing well. Smells are increasing and so is bud density. Giving them water and the occasional top dressing, They should be fine till harvest now. Added in some bokashi grains to the medium to help unlock even more potential for the plants and nutrient uptake. If that's how it works, more a less kitchen sink mentality and does not seem to hurt. Going to be hard to check the trichomes on this plant as it is so dark but will need to keep and eye on it in the next few weeks and it will be getting close to its estimated 13w harvest date. I made a little tea out of some of the flower the spider mites/thrips where not touching. in hopes some of the extract will stay on the plant and prevent them from eating it, I honestly can't tell if it did a thing, I like to think it did something but doubtful. Also got my hands on a bunch of predator mites. There where a bit past the BB date so hopefully they will still be active/alive. Side note uploading videos into the diaries is great and all, but takes to long to resize and process, can't hit save till its all done... no idea what its doing in the backend.

Beautiful plant 💚

awesome strain would 100% recommend.... still got a plat and a half to chop