Likes
Comments
Share
The plant has grown significantly in height, approximately 2-3 times in the two weeks since I switched to 12/12. It looks healthy and green, with large burdocks the size of a palm and larger on the central cola. I didn't top or trim this shoot. I started bending it this week, using plastic clips from AliExpress that I stole from Milya. They're even more convenient than rubber bands—no need to tie a ring around the pot and tie to it. I simply form the main cola parallel to the floor, and the side colas as far away from the main one as possible. This way, I can fill the entire space of the box, and air circulation between the branches will be better. Yesterday, I watered it with 0.2 liters of BioEnchancer solution.
Likes
14
Share
Esta semana no he tenido mucho tiempo para hacer un buen reportaje de fotos. Las plantas van geniales han acabado de pegar ese ultimo estiron y estan empezando a formar las flores. De momento todo bien. Dosis suaves de nutricion
Likes
8
Share
The #1 Pheno was growing pretty clumped up, so i Trained it a little bit. I did take some clones from all of them and i will switch them to flower at the end of the week. So far so good. Hoping for the Best.
Likes
184
Share
#seedsman420growoff and #SeedsmanSeeds 📆 Week 15, 3-9 August 2024 3-9 August - Observed and let the plant grow. 📑 Pineapple OG performed well this week! Her water intake has slowed down, one of the final signs of maturity. About 4 more days of a light nutrient feed and then a fresh RO flush for 2-3 days. Harvest is right around the corner. 🍶 6 Aug nutrient solution changed 🍽️ 6 Aug feeding schedule updated 💧 Using reverse osmosis water with EC/TDS at 0 🐉 Nutrient Solution EC 1.9 at 74 degree F 🔆 Light power at 65%, DLI 40 canopy coverage at 12hrs 😤 Using General Hydroponics, HGC728040, Dual Diaphragm Air Pump, 320 GPH That is it for this week. Thanks for the look, read and stopping by.
Likes
2
Share
She's not as big as last time, I think I didn't catch it with the nitrogen soon enough.
Likes
12
Share
Struggling with RH, tent is too crowded bc I have lots of negative pressure, tent is bowing in hard. The best I can get down to is 50%RH, however I have tons of circulation. Look at video. I put a dehumidifier in the lung room. Rh drops if I open window, but its raining. Too wet outside rn. It went from blizzard (dry) to rain for 7 days now, maybe thats why Im struggling. Need circulation in lung room too. Vents open, still struggle, tent door open, im fine. And I use blackout curtains so no light penetrates the room. It maintain complete darkness 24/7. Plants sleep when i sleep, so never worried about it. My house was built in 1952 post WWll, so no insulation, just straight brick and a solid slab. That means it will hold moisture. Lung room at 35% RH. Rearranged set up. Trichomes...... 70% clear, 20-25%% cloudy, 5% amber
Likes
5
Share
@braxat420
Follow
Everything is filling out nicely. The Banana Jealousy is finally catching up to the Black Opal x Zkittles in terms of bud size. She's starting to smell sweet and creamy. I'm very much looking forward to these finishing up. 13 hours on, moving toward 10 hours on over the last two weeks.
Likes
58
Share
143gr for the Larger pheno and 97 for the shorter, very respectable yield in total for 3 Wk Veg. Total 240gr even they each had 1.5’x1.5’ of space. Big yielder, buds are 10/10 & very easy to grow . Could be prone to mold in an uncontrolled environment.
Likes
2
Share
@Doncuero
Follow
Ultima semana solo riego con 3 ml De enzimas por litro de agua, esta etapa es un riego final, donde se puede esperar a que se seque el sustrato. Una vez las hojas no muestren signos de vida, o estan muy amarillas, ya no cumple función para realizar la fotosíntesis, dejar la planta mas tiempo ahí es perdida de recursos. Es el momento ideal para poder cortar. NOTA FINAL: Cherry Lemon AUTO: Es una genética compacta pero productora, con manifestación de antocianinas ante los cambios de clima, mas calor es igual a un color de las inflorescencias mas lilas. Mas Frio, y el color central tiende a ponerse morado, a un color purpura y vino tinto, propio de las genéticas Cherry. Tonos de aromas cítricos y dulces en el aire. AK ULTRA: Es una genética bastante sativa, con una floración larga, esta planta todo lo que le puedas dar, se lo va a comer , asi que hay que tener precaución a la hora de administrarle la comida semanalmente. Para verano es una genética excelente, y puede llegar a dar bastante producción, dentro del indoor llegando a 1.20 metros 1.30. Tolerando mucho el calor y la sequia. Flores densas y compactas, ramas laterales abundantes , aromas a limón y Diesel por el aire. En lo que respecta a la alimentación de las sales, tantos A+B y C . Las autoflorecientes con las solución A ( N 4- P 2- K 3) tienen una buena base de nitrógeno, calcio y magnesio, lo necesario para que la planta crezca hasta la semana 5 sin necesidad de cortar el nitrógeno de golpe. Sino que aplicando la mitad de la dosis cuando la planta entre en floración. Durante las primeras dos semanas se recomienda tirar la mitad de la dosis utilizada en vegetación + la solución B que es la de flora ( N1: 5 P- 5 K) luego de la tercera semana ya se puede aumentar la dosis de 2ml x Litro en cada riego a la semana. Por ejemplo, si la planta en la semana come 800ppm. El primer riego debe aumentarse cada 1ML en agua base de osmosis 0.045ppm hasta que la solución marque 400ppm - ML. A los tres días repetimos hasta lograr 400pm-. El próximo riego si no vemos excesos, se puede diluir un poco mas de ML x L hasta un máximo de 5ml de la formula B. Luego de 3 riegos con sales, es recomendable regar con agua lo mas limpia posible o usar enzimas para que haya un arrastre de las sales y el sustrato quede mas liviano. Dejando de aplicar sales y regando solo con agua 2 semanas antes de la cosecha. En la solución C para auto florecientes en todo el cultivo con un NPK de 1:1 5:1 . Las dosis acá fueron mas altas empezando de 2.5ml hasta 6.5 ml x Litro de agua. Aquí no hay sobre-fertilización, se puede agregar tranquilamente hasta 4 riegos en dosis bajas , y ya en el quinto riego es recomendable usar solamente agua. Debido a que es una formula que expreso una pequeña falta de PK, se pueden agregar aditivos ricos en Fosforo y potasio para potenciar el cultivo. También como la solución C, es recomendable dejar de fertilizar dos semanas antes de la fecha de corte o cosecha , cualquier tipo de aditivos minerales, dejando así un sabor mas suave a la planta. OJO: Si ud va a usar este producto con fines medicinales como aceites y extracciones, es recomendable que limpie bien el sustrato, Cortando con la fertilización 10 a 15 días antes de cortar la planta. De lo contrario, puede seguir alimentando la planta hasta el ultimo de sus días. Pero el sabor no será el mismo y arruinará el trabajo de meses solo por un capricho de querer tener mas producción. Pero si a ud no le molesta, puede fertilizar hasta el ultimo dia de vida de la planta. TIP: Si tiene la posibilidad de usar enzimas por cada 3 riegos de sales minerales, seriá lo mas perfecto para la planta. Luego puede volver a fertilizar tranquilamente. Aqui un ejemplo. 💧( AGUA) Semana X Fertilizacion (🔴 ) Fertilizacion (🔴 )Fertilizacion (🔴 ) 💧( AGUA) O enzimas. Repetir, dos semanas antes, parar de fertilizar.Y regar solo las proximas dos semanas con agua.
Likes
13
Share
@Guillhemp
Follow
Han estado creciendo 4 semanas (1Mes) con tan solo 260w full spectrum LED. Hoy las paso a floración y aumento hasta 611W añadiendo los COB.💪
Likes
27
Share
Looking great and flipping within days Grown under Smart-8 Check out MEDICGROW website https://medicgrow.com/ Really excited to see what it can do I’m flower. Love the Bloom button which increases red spectrum when wanted/needed… Currently running at 40% Official Website: https://medicgrow.com/ Facebook: https://www.facebook.com/medicgrowled Twitter: https://twitter.com/medicgrow Instagram: https://www.instagram.com/medicgrow420/ YouTube: https://www.youtube.com/channel/UCNmiY4F9z94u-8eGj7R1CSQ Growdiaries: https://growdiaries.com/grower/medicgrowled https://growdiaries.com/grow-lights/medic-grow
Likes
8
Share
Cut some lower leaves that was touching dirt.
Likes
20
Share
@DE_BW
Follow
The plant showed clear signs of maturity, with slowed growth and stabilized bud structure. A strong, complex aroma developed, combining sweet and slightly sour notes that filled the space. No further swelling was expected, as the plant fully shifted into its final ripening phase.
Likes
17
Share
@foxbberg
Follow
Day 22: Drain EC 3 feet high and risin'😅( average 3.3 to be exact...) dunno how much whatever-salt is building up in that pots, but it obviuosly doesn't bother the ladies. Dark green colour, very few 'claws', no signs of tipp-burn, new foliage appears in a juicy green and turns dark in an instant, leafs point upwards....... looks like they're happy😊. Planns for this week: - Install the scrog-net - Obsereve plants/soil ( when do i have to feed nutrients again?) otherwise there will be no changes...... Thoughts: These bushy babies will be kind of a challlenge to create this scrog the way i'm used to (basically bending the 4 main main colas to the corners of the tent, upper branches to the walls and spaces between the pants, lower branches to the very center). Now these ladies make so many branches, so close togehter and so equal in length, underneath huge fanleafs..... i'd love to have them in a 100 square meter canna-crib....but in a tent...????? I really hate doin' things without having them planned - but in this case i guess i will have to install the net, start weaving and see what's happening😯 Day 23 Let's keep it positive...... indoor-climate of 64% rh is perfect for my health💪😁!!! ......but in my tent it's killing the vpd😖. at a lousy 24 degrees C, i'm readin' about 60-64 % rh wich results in about 0.7 to 0.8 kPa.* More figures? Here come the crazyones👻!: pH 5.5; EC 4.2😨 but thats only drain from plant 3....... average was 6.1/3.6 The girls busy produce roots, shoots and leafs....... still very green, still not unhealthy.......few claws, no tipp-burn. Basically a comfortable place to be: It's not bad yet - no work but watering - and it can only get better!!!😁 *VPD issue solved: The sensor hung too close to a fanleaf - didn‘t expect this thing beeing so sensitive 😅. Day 24 Climbed new hights this morning: Plant 1 had an EC of 3.8 - the others didn't climb any higher than yesterday. So maybe we've reached the climax..... 😇 Visible growth now - so i installed the scrog-net and will start bending and weaving these days:-) Thoughts: Did beeing out of VPD-range for one day harm my plants? How exact can my sensor measure VPD? after a bit of research i found out: Whatever you buy for less than 200 bucks is far from beeing exact! Even professional sensors have a margin of about +/- 1% in relative humidity. Thermometers at least +/- 0.5 degrees C. This could give some a good guess of the actual VPD BUT: Leaf-temperature-offset is absolute key! Many of our trusted homegrow-equippment isn't even able to measure it (some offer default temp-offset) ....don't wanna go further here - but there's no way to achieve something like a precise VPD-measurement in homegrowing. So why caring for VPD? Even with those less accurate instruments, you may be able to keep your plants in something like a comfort-zone. Way better than only guessing 👆!!! In case i ran a much higher VPD than planned, yesterday (due to a missplaced sensor) , it will not harm or kill my plants. they might have had a bit of stress from dry air - but nothing to worry about! STAY TUNED 👈!
Likes
2
Share
Update week 2 veg👽
Likes
47
Share
@Roberts
Follow
Apple fritter clone did really well. Heavy dense buds on her. I think she did better then the mother plant. She grew great under the Spider Farmer SE3000. Strong smell, and great frost. Thank you Amsterdam Marijuana Seeds. 🤜🤛🌱🌱🌱 Www.amsterdammarijuanaseeds.com Thank you grow diaries community for the 👇likes👇, follows, comments, and subscriptions on my YouTube channel👇. ❄️🌱🍻 Happy Growing 🌱🌱🌱 https://youtube.com/channel/UCAhN7yRzWLpcaRHhMIQ7X4g
Likes
Comments
Share
📆 Semana 9 La A5 Chaze de Terpyz continúa madurando con firmeza. Tras quitar una de las dos puntas por exceso de humedad —ya controlado— la planta responde concentrando energía en la estructura restante: los cogollos se endurecen más, ganan resina y muestran un brillo más intenso. Los pistilos siguen oscureciendo y la flor empieza a enseñar ese aspecto serio y definido de una Haze en su tramo decisivo. El aroma sube otro peldaño: terroso, amaderado y especiado, ahora más afilado y profundo. La ventilación queda perfecta con la punta principal, y los riegos bajan ligeramente para mantener estabilidad y evitar cualquier repunte de humedad. 🌼 Semana de ajuste fino: potencia, aroma y resina concentrándose en lo que queda de estructura. ¡Seguimos creciendo fuerte 💪!
Likes
27
Share
New Aeroponics "root rain" mist cloner! Holds 2 gallons of water. I added 8 Tsp of CloneX clone/seedling nutrient. PH was 6.0-6.5ish, good enough! These clones inside got zapped pretty hard one day, because I forgot to plug in the water pump one time after playing with it hehehe... Some didn't make it, but most survived! every other plant was watered with just de-chlorinated tap water, for re-hydration. #4 has been selected as the winning pheno! The mother plant had her home upgraded to a 2gal pot. The root ball was not so bound, due to her receiving a root-prune not too long ago, she was re-potted back into a solo cup. I pruned the bottom of the root mass off with a light pinch, and potted her into her new 2gallon home!