Entering week 3, Co2 was implemented and the plants love it. Will be spraying for pests this week.

Holy smokes another great week. I could not help myself and my snippy hands trimmed some of the lower larfy flower sites, and interior fan leaves. She exploded in bud production. Dialed back the nutes a bit as she nears the finish line.

Everything looks fine. Stopped feeding them for 2-3 days because of the yellowlish leaf tips. I am thinking to make a defoliation since a week but i am not sure how i should do it. Would appreciate some advice ^^

had some left over fish shit tea brew from the veg run, so I gave it to the flowering girls right now, due to the brewing there are only low levels of N and lots of microbes. Worry about the microbes and the plants will uptake what they need, this philosophy seems to be working very well.

Rite early days so dunno exactly wot methods a fancy trying this time maybe transplant one of the clones maybe not tho mite make an attempt at main lining but a know am goin to struggle for space so it iz wot it iz got a scrog n al squeeze a sexy as fuk sea of greenery they can lock the locks 🔐 but cannot stop the clocks ⏰ if ye know ye know @chedderbob112@s2340420 🏴󠁧󠁢󠁳󠁣󠁴󠁿

Pre flower some awesome growth little bit of nutrient burn but she'll be okay I know for next time 🏆 Rome wernt built on a day . :) happy Update no lst applied she's really tall and spaced herself out well so I think I'm going to just leave her alone and give her feeds when she wants :)

No training, just hope for them to deliver. Day 57 . All is good, small doubts about FD3 but she has to make it or bin it ... Future looks brighter, other girls form some buds and 50 g is looking achievable at least on couple of them ;) Future will show ;)) N went down as feed chart, still no huge hopes from them.... Some leaves look hungry, couple redish stemps with mini Mag def on FD and thats all for now.... Day 58 Morning. Girls starts to love it 4 sure. Droped down temp by 2 degrees from 28 to 26, they liked it even more. Hope it will stop pistils going amber in begining of flower ... In the midle of the day all will get molasses and cal mag, leaves a bit too bright, hope molasses will boost bacterias and last bits of N will be used. Increasing level of Top-Max aswel. So feed looked like : Heavy feed Water with silica Water Water with molasses and CalMag At the end of the week they will get heavy feed again. Day 58 Evening. New attack system ;)) instead of 2-3-3 , girls regrouped into two heavy rows and now go like 2-2-2-2 ;)))) Girls are drinking really fast, still get only around 1.5 liters every second day. For auto i quess its ok. In couple hours afer feed they pray, so its a good sign always ... Day 60. Heavy feed day, they started to bulk up everyday, really nice to see them everytime. Day 61. They are bulking up. Thats all i have to say and i really really like it ;))) Day 63. End of week. Everything looks fine, just i really would want to defoliate them a bit, but dont want to stress at the same time. They look too sensi for me. All 3 FastDiesels started to show Mag def even on stemps, gave stronger cal mag water mix just for them. They need it often and a lot. Happy growing !

Week 13 / week 1 of flowering / may 2 first week of flowering finally. we are really happy here. i have applied Flora Booster and also bio neem to prevent plague. we are good and preparing to do our Best to achieve a Nice flowering for this plants.

11/10/21 new week for Captain future Single photos will be updated soon She bit slower then the rest but getting there topping has bin done and everything going great so far plants loving the new FC-4800 so as i 🤩 absolutely no extra heat is coming of them 👌🏻 I maybe will top some more but as far it Goes for LST this will be the only thing i will do to the plants let the rest grow freely visit www.marshydro.eu for your best gear and use the PROMO CODE: DEVILSBUD Fully marshydro supported Setup: Marshydro GT120x120x200 Marshydro FC-4800 LED lamp Mars Hydro tent handy info ●【Lock All Light Insid】MARS HYDRO Grow Tent Interior is made of diamond mylar. Non-toxic to the environment, no harm to plants. High-quality 1680D canvas being double stitched, (ALL OTHERS BRAND grow tent is 601D canvas) which is tear-proof for perfect light locking, No light leaks or rips at all. ●【Durability Grow Tent】Stable Metal corner adapters and poles are the trustful supporters of the tent. No rusting nor paint-falling. Quick easy tool-free installation. Carries strong heavy-duty SBS zippers, double layer lining to create a light-proof seal. ●【Easy Observation of your Plants】Special peeks window made by double layers of cloths. Observe the growing conditions of your plants without opening the tent and avoid disturbing plants. The peek window also serves to dissipate heat and ventilate air. ●【Removable Tray Keep Clean】The package includes a removable waterproof floor tray to hold soil and fallen leaves. The tray can be taken out easily to wash. Removable and water-proof makes cleaning easy. ●【Good Ventilation&Fast Assembly】 Circular double-sleeved vent holes with adjustable nylon strap for air circulation by exhaust fan, ducting, carbon filter, or reflector. Better allows proper light, heat, and airflow. Quick tool-free installation. Reinforced by a sturdy metal frame to ensure security and stability, supports up to 140lb. Perfectly safeguard your plants to thrive even in winter. Some info about the Marshydro FC-4800 Superb Quality LED Chips: The whole light is composed of 1206 pcs Samsung lm301b and Osram 660nm chips. More than two times as many LEDs are used to drive the grow lights at low currents and to avoid overdrive. Quality is guaranteed and efficiency is up to 2.8 μmol/j. Even PAR Distribution and High PPFD Output: The multi-light bar design and the densely distributed light chips enable the LED grow lights to achieve the optimum PPFD required for plant growth over the entire effective coverage area. Specifically Designed Spectrum: To ensure even plant growth, blue and red light are enhanced on the basis of a full spectrum combination. Not only does this accelerate plant growth, but it also improves the yield and quality of the plants at the same time. Dimming Daisy Chain Function: The dimming function saves on electricity costs and enables brightness from 10% to 100% for the different stages of plant growth. A single master light can connect up to 30 lights in a daisy-chain system. Business LED Grow Light: The light's wavy heat sink dissipates heat quickly and the IP65 waterproof allows the light to operate in humid conditions. 180° collapsible feature for easier installation. All these features provide favorable assistance for commercial cultivation.

Day 12 since the lights went to 12/12. This week just general maintenance , as the autopots water the premixed soil. Every teo days I have tightened the ties holding the branches down. Lots of defoliation as growth rate is really good. Also did some lollipoping remove all the low hanging buds.

Welcome to the next week of great adventure with young gorillas. The beginning of the week I started with a small flush with tap water at pH 6.3. I intend to change the 150W HPS lamp to brand new 250w plantstar this week. In next few days gonna use pk 13/14 One love for everyone 🌱🐒🌱🐒🌱🐒 P.S: mobile application is terrible, it is very difficult to update something, it always gets stuck during the upload of photo, no upload percentage. Already twice made me mess up the whole week EDIT: Additional HPS mounted 250w plantastar. Unfortunately, after purchasing the wattmeter, I discovered that my LED consumes only 220w of guaranteed 350w. I'm thinking about giving it back for a guarantee. The current energy consumption of the entire project is 810w / h

Germination - I planted the seeds at home in a light mix substrate. After 5 days, I transplanted into the previously prepared substrate Ingredients of my Substrate : 10l soil, 1l perlite, 0.8l vermikulit, 0.8 worm humus, 30g Guanokalong powder, 30g Guanokalong seaweed powder, 30g Guanokalong veg pearls. Unfortunately, the weather forecast called for a night temperature of 7 degrees, so I made a greenhouse out of pet bottles Blue granules are protection against slugs, I have had very bad experiences with them. As you can see slugs are really many and have made my plants slug cemetery :D Slime everywhere one looks, I call it the path of death Watered with water from the stream directly from the spring

The Tropsantois was a male had to chop him :( . Having some issues with humidity I think it’s causing some hairs to turn red on few buds ! Other then that trichomes are getting crazy on The buds , they are really filling out now starting week 3 . Futur vert FM8 led is killer I’m loving it , added a SensorPush and a carbon filter the dank dank smells are coming on strong 👃 🍓🍪🍉

Time for chop is here 🤚🏼😎 Smells good, looks good. I have these three girls hanging upside down in a dark room with a heater on to keep between 60°F & 70°F & indirect airflow in the room to prevent mold & preserve terps. Aiming for 7-14 days drying time followed by a minimum of 21 days burping & curing. Will make a harvest post regarding dry weights smells & better flower pics in 4-5 weeks time. Until then check out my other grows & happy growing to all. 😊🌿

What a week. First off these girls are way to damn small to be 8 f'n weeks in. But I've delt with about 2 weeks of very hot weather eary on. The water temp got up to 85 that I know of. So it fried the roots. I discovered hydrogen peroxide little to late but it has helped. I really thought I was gonna lose a couple this week but they are doing much better. I got my new grow tent lights in. Using them on the main grow room until I get the other new light built but thatbwont be for some time. The other light is almost done. I've got the new pvc pipe frame made. Yaya I know cheap. But hey that's why I did it. I just ordered to more light setups. That puts me at $300 for this light alone. But damn it is so Brite. Right now with just 6 lights on high its at 283watts. I'm adding 2 more that should put me around 376 Watts for a 5x5. These are the large cog legs. I have 3500 wave length ones. I also built a cloner. Shout out to @icanthc for one of his videos that gave me the inspiration to build my own with improvements. I've had bad luck with clones so far so I hope this will help. I'm going to cut down CDG#2. She so damn far behind. I will get 3 cloned out of her. Fingers crossed.

Extreme defoliation

In dieser Woche hat der Stretch endgültig deutlich eingesetzt. Insgesamt macht die Pflanze momentan einen sehr gesunden und kräftigen Eindruck. Die 8 Haupttriebe entwickeln sich weiterhin relativ gleichmäßig, auch wenn zwei davon momentan etwas hinterherhinken. So langsam zeigen sich mehr und mehr Pistillen und die Blütenansätze beginnen sich auszubilden. Das LST wurde an Tag 51 noch einmal überarbeitet. Die alten Bodenanker habe ich inzwischen vollständig entfernt und verwende nur noch Schnüre, um die 8 Haupttriebe etwas nach außen zu führen und auf einer möglichst einheitlichen Höhe zu halten. Ich hatte durch das mittlerweile ziemlich dichte Zentrum zwischendurch ein paar kleine Feuchtefallen, die sich aber mit dem Stretch zum Glück größtenteils von allein wieder aufgelöst haben. Lediglich insgesamt 3 Fächerblätter wurden zwischendurch entfernt, da diese direkt vor den Lüfter wuchsen und den Luftstrom blockierten. Ansonsten versuche ich die Pflanze bis zum Lollipopping nach dem Stretch möglichst in Ruhe zu lassen. Der Wasserbedarf ist inzwischen etwas gestiegen. Gegossen wurde diese Woche 2 mal: 1. Gießvorgang: Tag 52, insgesamt ~4 Liter (1ml/l Fish-Mix, 1.5ml/l Bio-Grow, 1ml/l Bio-Bloom, 1ml/l Top-Max, 2ml/l Bio-Heaven, 0.81ml/l CalMag, ca. 0.24g/l Bittersalz, pH-Wert ~6.4, EC-Wert ~1.7mS/cm, Topfgewicht vorher ca. 4.4kg, nachher ca. 6.9kg) 2. Gießvorgang: Tag 55, insgesamt ~5 Liter (0.5ml/l Fish-Mix, 2ml/l Bio-Grow, 2ml/l Bio-Bloom, 1ml/l Top-Max, 2ml/l Bio-Heaven, 0.81ml/l CalMag, ca. 0.24g/l Bittersalz, pH-Wert ~6.2, EC-Wert ~1.7mS/cm, Topfgewicht vorher ca. 4.1kg, nachher ca. 7.1kg) Kurz vor dem zweiten Gießvorgang wurde zusätzlich der Topf noch einmal mit etwas frischem All Mix aufgefüllt. Die Lampe ist mittlerweile auf ihrer vorerst maximalen Höhe angekommen, um so die Lichtverteilung etwas zu verbessern. Zusätzlich wurde diese auf nun 100% Leistung eingestellt und liefert damit momentan etwa 700-750 PPFD an den Triebspitzen. Die Regelung für den Luftbefeuchter habe ich mittlerweile wie folgt eingestellt: rF: min. 55% | max. 63%; VPD: min. 1kPa | max 1.5kPa In der ersten Nachtphase nach einer Bewässerung steigt die Luftfeuchtigkeit zwischenzeitlich noch zu stark an. Die Abluft und Zuluft wurden daher mittlerweile auf volle Leistung gestellt, aber wenn das Problem bestehen bleibt, muss ich mir mit fortschreitender Blüte noch mal mehr Gedanken darüber machen, wie ich das besser in den Griff kriege. Zu Beginn der Woche wurde auch, wie vorher beschlossen, die Webcam durch ein neueres Modell mit besserer Bildqualität ausgetauscht. Leider habe ich in der Box jedoch nicht mehr die Möglichkeit die Webcam weiter von der Pflanze weg zu positionieren, wodurch diese mittlerweile nicht mehr ganz ins Bild passt.

Girls are growing out great even with a few mistakes this week. I keeping for getting to get a clamp for the exhaust fan. Came home twice to Temps in the 90s. But the girls are just pushing

Another great week of bud growth and terpenes production. Think I'll be finished half was through week 9, or at the end of week 9. So far no signs of any hermaphrodite traits. Wish I started flower with a little less light intensity, as I feel that's caused the buds near the top to slightly fox tail, as the ones lower down look abit of a better shape, although smaller.