Likes
Comments
Share
@Mrdub
Follow
This girl is booming along colas starting to swell even more trichome coverage starting to reeks of rotten fruit kinda burns my nose a bit lol looks like she only has a few weeks left still waiting for the fade to start setting in loving these purple tips I'm going to get these branches spread out to get more light to inner colas she's so bushy don't look like I defoliated her but I did the added calmag had really helped I haven't seen any calmag spots so far running 6.2 ph lights at 100 percent give her a gallon of water every couple days now that I'm in late flowering I run one 24 hr cycle then let her rest for 8 hrs stopped using recharge jus feeding her heavy now starting to taper off so I can strating hitting her with the carbo flush and getting her ready for harvest so here's to another week of growing lfg
Likes
6
Share
Starting to get close to the end, these large girls are packing on the weight very large plants very frosty will have a great yield from these plant
Likes
10
Share
@Prilyfe13
Follow
12/09/2025 Last week of nutes and last week of real flowering. Both ladies look just about done. Papaya Cookies is nearly there. Lemon Cherry Cookies isn't too far behind either. But she definitely has the whole week plus a couple days to go. Papaya Cookies might be done by the end of the week, if not sooner. I might have to push her a little more so I can harvest them at the same time. I won't be changing out the water until after lights out as I always do. So today will just be a plain water top off. Well, that's been everyday for like 2 weeks. Lol. But, I noticed both ladies definitely didn't drink as much as usual last night. Another sign that they are almost done. Normally it's close to a gallon a day. This was about a half gallon. Anyway, I won't be recording the morning readings as the water will be changed out today. If it were under the normal night and day schedule, it would be easier to do this, but the AI suggested this time of day for lights out. It's warmer now than at night. Obviously. Lol. So now I have to wait for lights on after the plants have had their rest to change the water out. Then we can take readings. Next week, which will only be 3 or 4 days, I'll be doing a slow wet trim. Or I guess the defoliation I should have done 2 months ago. Anyway, I'll be pulling anything with a reachable stem. I won't be cutting the sugar leaves. That's after drying with my new cannabrush. We'll see how well this baby works. On a final note before lights out, Papaya Cookies has a few buds that are nearly done on the bottom and they are super hard. Really nice smalls. There's a bit of larf, and I can't really reach the buds in the middle, but they seem to be the ones taking the longest. So I think we'll be waiting for those ones to finish. Lemon Cherry Cookies is kind of the same. Lots of bud in the middle that I can't reach. They aren't done and still have loads while pistils. But the buds on top are still swelling, so that's a good thing. We'll definitely see some bigger buds from this little lady. Good afternoon everyone. It's 6:41pm. New water new nutes cut in half. Readings: Papaya Cookies: pH: 5.8 EC: 824 TDS: 409 Lemon Cherry Cookies: pH: 5.8 EC: 874 TDS: 439 So it's 10 pm and I decided to check the pH and whatnot. It spiked to 6.8. What is happening? I cannot get it to stay in range. I don't know what to do here. It has to be something in the roots. I wonder if it's my tap water. It seems to have worsened since I started using it, but I can't afford distilled bottles. I will be ordering distilled for the 3 day flush. But that's only 3 days and I'm saving up for it. Back to the matter at hand. pH spiking. Both plants. The EC and TDS also increased. Not by much, but still increased. The goal is to decrease. Hopefully, with the lower nutes, the roots or whatever gets diluted enough to slow everything down. They're already not drinking as much. So there's very little time. I wanted to get it corrected by today. But nope. Nothin doin. Well, I guess I'll be checking the pH tomorrow morning and changing the water out. I might have to change it in the morning and after lights out. We shall see. If it drops, I'm going to pH it back to 5.8 and leave the water alone. That's the plan. 12/10/2025 So today I checked the readings like everyday. BUT today my back is killing me and I can't lift the shit. It's really annoying. So frustrating. Anyway, Lemon Cherry Cookies didn't change one bit overnight. pH is still at 6.8. the EC and TDS are also in roughly the same spot. But she did drink about a half a gallon and there was no change, so that's good. No increase in nutrient concentration. But the pH man, the pH is brutal. Papaya Cookies dropped her pH down to 6.6, so that's good. Not in range, but still good. Her EC and TDS are also about the same. So same situation but a lower pH. So I popped 3 ml of pH down in and mixed it up. Half gallon went into each container. It did nothing to Lemon Cherry Cookies. The pH stayed the same. But the EC and TDS dropped a little. Papaya Cookies with the gallon, dropped down to 6.2 and the EC and TDS dropped a little bit as well. Readings: Lemon Cherry Cookies: pH: 6.74 EC: 922 TDS: 465 Papaya Cookies: pH: 6.5 EC: 867 TDS: 430 Forget everything you just read. LMAO. The numbers increased. I guess it's just a waiting game now. I'm gonna pH the water for both ladies after lights out. This morning I just added the plain pHed water. And not much happened. It's the roots. Gotta be. There's nothing left to look at. Well there's the tiny dose of nutes, but I don't think that's the problem. It could also be from the water itself. It's pretty hard. But I have no idea what to do about that. Is there a water softener that can be used in a bucket? Or would that be a really bad idea? Also, I just thought about this yesterday when I was removing Lemon Cherry Cookies from her bucket into the reserve for the water swap. As we all know, the tail of the roots is super long. So I have to lift it with my hands out of the water. My question is why didn't it ball up like Papaya Cookies? I think they have the same amount of roots, but Papaya Cookies has an actual ball where Lemon Cherry Cookies has a tail and smaller root ball. What gives? Anyway, that was my weekly WTF question. Next week it's gonna be something like why won't this carboflush work? Should I add more? Should I swap out the water... Again?... You know. I'm implementing Murphy's Law here. What can go wrong will go wrong. LMAO. It's all good. I'm preparing for that exact question. I bet it's gonna be increasing EC and TDS levels. That's gonna be the problem. And no idea how to solve it. Swap out the water every few hours? That's crazy. Maybe one or two swaps every day, but not every few hours. A waste of carboflush and water. So I'm super concerned with who will finish first. Papaya Cookies looks like she could be done by the end of the week. Lemon Cherry Cookies looks like she could use the whole week and then some. I know I said this last week, but it is a real concern. And I still have nowhere to put the other tent. But it's only for a few days and not an entire week. Well, hopefully not an entire week. I have to trim in the tent so I can kinda keep the smell concealed. The fan on level 10 with just a side door open should be fine. Plus, I'm only taking off the sugar leaves at that point. So it should be a little faster with this brush thing and less smell will escape. Oh, I'll be using Grove Bags for the curing process. I really do like them. But I still need to add a Bovida pack because of the dry winter air. 12/11/2025 Morning readings after correction. Papaya Cookies: pH: 5.95 EC: 763 TDS: 381 Lemon Cherry Cookies: pH: 6.2 EC: 946 TDS: 473 I got a couple trichome videos posted for everyone to see. I actually haven't watched them yet, so I'll update shortly. But in bigger news. I found a full fledged flower on Lemon Cherry Cookies this morning. Complete with 1 seed. Then I found a bud with 3 seeds. Not developed yet, but there nonetheless. So that explains why she's taking longer to finish up. I'm hoping it was isolated and those are the only ones. I looked all through the bottom where I found the 2 sites. I think I found one more, but I left it alone. My question is, if I clear out the seeded sites, will the plant mature faster? Good question right?! Because what I read was that seeded cannabis plants will take longer to mature because of seed production, as seeds take 6 to 8 weeks to mature.i had a gorilla cookies that went for like 21 weeks because it got seeded everywhere. No clue how, I never found the pollen sacks. But that plant was super healthy and HUGE. Well huge for an Autoflower in a 3x3 tent with 3 more plants in there. Anyway, I'll definitely have to bring out the 2x2 now. As I said, I have trichome videos and I haven't seen them yet. But I have a feeling that Papaya Cookies is just about finished. As in I could probably start the flush this weeks as I suspected. We'll see though. Oh speaking of healthy plants. Lemon Cherry Cookies is also still unhealthy. I spoke too soon. Still locked out and now more leaves are turning yellow. The weird thing is, I added a very small amount of nutrients. How there's still an issue I don't know. I guess just wait longer? 🤔 Ok, so I just watched both videos. Lemon Cherry Cookies definitely has more time to go. The trichomes are mostly clear toward the middle of the plant. So she definitely has more time to go. Hopefully with any luck, she'll mature by the end of the week. Papaya Cookies has almost all cloudy trichomes. I like a bit of amber in the mix and there is none. So I'm going to wait for Sunday I think then start flushing her. I'll flush for 3 days. So that will be finished on Tuesday. And that's when I should be able to start flushing Lemon Cherry Cookies. Then I chop Papaya Cookies and hang her up. At the same time, I do a 3 day dark period for Lemon Cherry Cookies while she finishes up. In the meantime, Papaya Cookies is happily drying right above her. I'm still trying to figure out the best way to work the environment. I'm thinking I can just keep the temp at around 66° and bring the humidity up to 50% I think that's good. I have to look into it. But it's only for a few days and there's still plenty of airflow. I will be turning 1 fan off though. As to not disturb Papaya Cookies while she dries. Plus I don't need 2 fans for 1 plant this size. So yah, that's my plan. And as long as it works I'm good to go. If it doesn't work, I'll have to bring out the 2x2 and hook it up to the 3x3 and use that exhaust to pull from the tent. I have an extra fan so I can run that as well. For air circulation. Not too sure how I'm gonna keep the humidity up in there. Hmmmm. That's not good. I can definitely keep the temp low, but the humidity is super dry here right now. Well, it'll be 3 days in the 3x3 drying so if the 3x3 isn't ready for both plants to dry, the 2x2 will only be used for like 7 days. With a 10 day dry, that is. I'd rather not rush the drying time. Although, if I can't figure out the humidity, I may be rushing it quite a bit. Like in a very bad way. So I hurt my back and am having trouble even checking the readings. Hopefully it's not all messed up. Also, I've been thinking. Both plants have nutrient lockout. Would it make sense to start flushing Papaya Cookies like tomorrow? She only has about a week left. 12/12/2025 Readings: Papaya Cookies: pH: 5.5 EC: 731 TDS: 364 Lemon Cherry Cookies: pH: 6.2 EC: 877 TDS: 438
Likes
37
Share
@Rob96
Follow
Really late updating this week so next got next week to upload tonight too, plant has been doing fine, she is fattening nicely and filling out along the stems nicely, surprisingly not too smelly yet though but hopefully that will come stronger soon, looks packed with crystals already overall pleased coming along nice
Likes
20
Share
Interesting week, plant #4 Topped & LST grew past plant #2 LST to 37 inches high. All 5 plants flowers are maturing at different rates so i'll be harvesting at different dates. I'm getting so stoked about these girls I bought a 2019 Dynavap M to try vaping.
Likes
19
Share
@babyoda
Follow
Flush day!!! Buds are like stonedd. AN products working very well.
Likes
116
Share
~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_ 10/14/21 😻 Everything looks great!! It's not often that our seedlings pray like this, they couldn't be happier under this MarsHydro..we should of noted last week that all seeds were placed immediately in their final pot (we do transplant autos sometimes, this was more for convenience) ..being a new light we're a little iffy on distance but 24 inches has them pointing skyward (we're keeping a close eye for any buring)..we typically do 18/6 for all autoflowers but thought we'd try 20/4 for a change..we'll update again midweek..thanks for reading if you made it this far and happy harvests everyone!! ❤️💡🌱😽💨 ⚡Mars Hydro/SP-3000⚡ Specifications ⚙️: Diodes: Samsung LM301B / Osram 660nm (960 total!) Driver: Meanwell 300watt 🔌 (300W±5% @AC120V-277V) PPF: 824umol/S ☢️ PPE: 2.8 µmol/j 〰️〰️ Lifespan: >50k hrs ⌛ Veg Coverage: 3 x 5 ft 🌱 Flowering Coverage: 2 x 4 ft 🌼 Weight: 10.1 lbs (4.6kg) -Uses an aluminum heatsink (no fan) and the driver can be removed to be placed outside the tent 🌡️⬇️ -IP65 waterproof ratings, tolerant to high humidity grow environments 💦 .. -Up to 30 of these lights can be daisy-chained together and controlled from a single light! 💡~💡~💡~💡~💡 ~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_
Processing
Likes
47
Share
hey guys so my welsh brother sent me some daffodil seeds called FTB1 from the Fast Buds company, and if i'm honest with you i'm so happy to be growing next year's autos, always been a dream of mine to grow the unreleased genetics, let's see if they sprout, i'm a bit nervous because they came unwrapped in the mail you know ... let's see. alright so first thing that happened is my propagator broke so i had to fix it up best i could with some cling film then threw it in the bathroom in the sink basically lol, day one many of the non test gens cracked and were growing, and fbt1 didnt yet, and i was like oh well, it was a long shot, it came loose in the mail, and it breaks my heart. Day 2 it had cracked and day 3 it had shot through the cube, check out the cookies week you can see the root sticking out from the bottom already, in the end it's definitely some strong gens and i cant wait to see it grow !
Likes
5
Share
🌱 Sour Diesel — Week 8 (Flower Week 3) — Strategic Reset Week ⸻ 🔁 Quick Recap — Where We Are • Genetics: Sour Diesel • Timeline: Week 8 from seed • Flowering: Week 3 • Height: ~60–70 cm (compact structure) • Room Temp: 28°C • RH: 65% • Feed EC: 2.9 • pH: 6.5 (kept above 6.0 intentionally) • Lighting: LED • Action this week: Strategic defoliation This plant is not tall — she’s compact, dense, and structurally tight. Which means airflow and internal light penetration become critical early. And that’s exactly why this week mattered. ⸻ 🍃 The Defoliation — Not Aesthetic. Architectural. This was not cosmetic trimming. It was: • Removing large fan leaves blocking interior bud sites • Cleaning inner congestion • Opening airflow channels • Resetting light distribution across the canopy • Helping the entire room environment (not just this plant) The room needed air — this plant was advanced enough to handle stress. That’s key. Week 3 of flower is the transition window: • Stretch is slowing • Bud sites are set • Energy shifts toward stacking At this stage, a strategic defoliation: • Improves transpiration efficiency • Reduces microclimate humidity pockets • Prevents internal leaf-to-leaf condensation • Encourages bud site activation below the top canopy This was structural architecture. Not haircut vanity. ⸻ 🌡️ 28°C in Flower — “Too Hot?” Let’s Go Deep. People panic when they hear 28°C in flower. But here’s where most growers confuse: 🔥 HPS vs LED Heat Behavior Under HPS: • Radiant heat warms leaf surfaces directly • Leaf temperature often equals or exceeds room temp • 28°C air under HPS can mean 30–32°C leaf temp • That pushes VPD dangerously high Under LED: • Less infrared radiation • Leaf surface temp is typically 1–3°C LOWER than room temp • So at 28°C room temp, leaf temp might be 25–26°C And VPD calculations depend on leaf temperature, not air temperature. ⸻ 🌿 What Is Leaf VPD? VPD (Vapor Pressure Deficit) measures the difference between: • Moisture inside the leaf • Moisture in the surrounding air But if you calculate VPD using only room temp, you’re missing the real transpiration dynamics. With: • 28°C air • ~25–26°C leaf surface (LED) • 65% RH Leaf VPD sits in a very workable mid-flower zone. Not extreme. Not stress-inducing. Not shutdown territory. We’re driving metabolism, not cooking terpenes. ⸻ 💧 Why 65% RH Isn’t Dangerous Here Context matters: • Good airflow • Opened canopy • Compact but cleaned structure • Early-mid flower (Week 3, not Week 7) At this stage: • Pistils are forming • Bud density is still moderate • Transpiration is active High humidity becomes dangerous when: • Bud mass is dense • Internal airflow is poor • Late flower resin traps moisture We’re not there yet. And we just improved airflow with defoliation. ⸻ ⚡ EC 2.9 — Aggressive but Intentional That EC is strong. But: • Plant is compact, not oversized • Sour Diesel can eat • pH 6.5 keeps availability wide (Ca, Mg, P balance) The key will be: • Watching leaf tips • Monitoring runoff behavior • Watching for clawing or salt stress Right now, if she’s praying and stacking, she’s handling it. ⸻ 🔍 What To Expect Next Week (Flower Week 4) After defoliation: You may see: • Slight pause (24–72 hours) • Increased vertical bud push • Better lower-site activation • More defined pistil clustering • Stronger apical dominance response If recovery is clean: • Buds begin early stacking phase • Internodes tighten • Resin production initiates at bract level If stress appears: • Slight leaf droop • Tip burn acceleration • Reduced upward leaf angle But based on structure and timing — this looks calculated, not reactive. ⸻ 🧠 Why This Week Matters Long-Term This week determines: • Airflow pattern for late flower • Mold resistance later • Bud density uniformity • Final trim efficiency • Light-to-bud conversion efficiency This wasn’t about now. This was about Week 7 and 8 survival. ⸻ 🙏 Appreciation Section To: • The OGs here since seed • The new followers discovering the journey • The silent readers • The critics • The skeptics • The lovers • The haters • The platform • The sponsors • The community • Grow Diaries itself Everyone has a place here. Growth happens in public. And that takes courage. Respect to all of you. 📡 Please stay tuned they can try and take us down but we never quit https://www.youtube.com/@DOGDOGTHEDOCTOR NEW 🙏 Thank you for your patience and continued support. FOR DISCOUNT CODES AND MORE JUST FOLLOW THE LINK https://website.beacons.ai/dogdoctorofficial 📲 Don’t forget to Subscribe and follow me on Instagram and YouTube @DogDoctorOfficial for exclusive content, real-time updates, and behind-the-scenes magic. We’ve got so much more coming, including transplanting and all the amazing techniques that go along with it. You won’t want to miss it. GrowDiaries Journal: https://growdiaries.com/grower/dogdoctorofficial Instagram: https://www.instagram.com/dogdoctorofficial/ YouTube: https://www.youtube.com/@dogdoctorofficial Deleted by Youtube Vimeo : https://vimeo.com/dogdoctorofficial Under construction stay tuned ⸻ Explore the Gear that Powers My Grow If you’re curious about the tech I’m using, check out these links: 🔆 Lighting & Environmental Control • Future of Grow — Advanced LED lighting technology https://www.futureofgrow.com/ DISCOUNT CODE: DOG20 • Lumiflora — Under-canopy LED lighting https://lumiflorade.com/ • TrollMaster — Environmental controllers and automation gear (past collaboration) ⸻ Genetics • Zamnesia Seeds — Genetics used in this project https://www.zamnesia.com/ ⸻ 🌱 Soil, Substrates, Boosters & Root Support • Plagron — Substrates, bio mixes, and supportive products https://plagron.com/en/ ⸻ 🎒 Storage, Curing & Preservation • Grove Bags — Curing and storage solutions https://grovebags.com/ ⸻ 📸 Photography Equipment & Tools (Not sponsors, but part of my creative toolkit) • Sony A6700 • Sony full-frame macro lens + few more • Stacking photography workflow - learning • iPhone (for behind-the-scenes shots) We’ve got much more coming as we move through the grow cycles. Trust me, you won’t want to miss the next steps, let’s push the boundaries of indoor horticulture together! As always, this is shared for educational purposes, aiming to spread understanding and appreciation for this plant. Let’s celebrate it responsibly and continue to learn and grow together. With true love comes happiness. Always believe in yourself, and always do things expecting nothing and with an open heart. Be a giver, and the universe will give back in ways you could never imagine. 💚 Growers love to all 💚 📸 P.S. – The Eye Behind the Lens All photos in this diary (for now — except for the ones showing the camera, which I took with an iPhone) are taken with a Sony A6700 paired with a Sony full-frame macro lens and a few more. Photography is part of the story — it’s how we share the fine textures, the glow, and the quiet details that words can’t always capture. I’ve also started experimenting with photo stacking — a technique where multiple images, each taken at a slightly different focus point, are layered together to create one perfectly sharp image from front to back. It’s not digital enhancement or AI; it’s pure photography — a way to reveal the plant’s beauty in microscopic depth, from trichome to petal. You’ll even see a few shots of "ghost me" capturing the shots — camera, lens, setup — because every grow deserves not just to be cultivated, but documented like art. FOR DISCOUNT CODES AND MORE JUST FOLLOW THE LINK https://website.beacons.ai/dogdoctorofficial NEW DISCORD - Official Server Invite Link : https://discord.gg/ksjAkA5T74
Likes
5
Share
@BelBudz
Follow
Despite the deficincies I'm still happy with the result! I used Coco/perlite as medium and found some deficincies in the very beginning and at the. For a next grow I would probably add worm castings and silicium flash for a better start. Place the tabs in a bit later so they last the entire grow. Use orgatrex and bactrex more throughout the grow. Update after drying: End result is 31 grams of small and fluffy buds. Not my best result and most likely caused by the deficincies early on in the grow. Smell and look are all right. Waiting some more for curing before I will taste them.
Likes
35
Share
Hun er virkelig sød og dejlig og hun er virkelig smuk og spændende og se på hun . Jeg har gang i et forsøg med at hun kun skal lave topskud og gerne 3-4 pr gren ;) pt ser det ud til at lykkes. Håber i vil være sød at rette mig hvis i ser fejl ! Jeg overvejer brug mit sidste frø i DWC :)
Likes
12
Share
Likes
4
Share
@deseed_uy
Follow
Pasamos de todooo y aun asi salieron tremendas rocas, de un clon ya con varios meses de crecimiento, con led y probando una tecnica nueva: sog. A pesar de todo enamorada de los resultados, pura resina con terpenos muy ricos, es como una galletita cremosa
Likes
2
Share
Likes
20
Share
Day 98 Day 63 Flower 30/05/24 Thursday Finally the time has come!! The fox tails aren't a issue for me as it's Percy smoke, and to be fair, there decent fox tails 😍😂. The plant is huge for a auto. I have wet trimmed, Removed all excess stem. Wet bud weight is 587g Wet trim is 35g I will update dry weight and smoke report 👌 Thank you to everyone who liked, commented and followed 🙌 Love for the grow 💚 Till next time ✌️
Likes
18
Share
@Mastr
Follow
She is absolutely monster I proud myself it's my second run This strain bud growing so wired so slow and even not good looking 🙄 let see when it finish I don't know about taste but I just don't like bud shape and they way she grow
Likes
4
Share
Likes
20
Share
De groeiperiode heeft ze doorgebracht op de vensterbank in de volle zon achter het raam(vegetation). Toen ze wat groter werd en de bloemetjes uitkwamen heb ik haar in de tent geplaatst onder een ledlamp van 600 watt van aliexpress, omdat het de laatste weken voornamelijk bewolkt was. De LST heeft haar geen kwaad gedaan, ze reageerde goed op het buigen en trekken. Ik heb haar verwend met de producten van Plagron en Spa Reine mineraalwater (PH6). Omdat ik haar in een air-pot van 38 liter heb geplant had ik verwacht dat ze een veel groter wortelstelsel zou hebben, maar dit is niet het geval zoals je kan zien in het filmpje. Dit was mijn eerste grow en ben super tevreden met het eindresultaat. Heb haar geknipt en opgehangen en wanneer alles droog is zal ik dit verslag voltooien. Ben zeer benieuwd naar de smaak. Wordt vervolgd... tot snel. 18 juli | de ganja van de lijn afgehaald, dikke takken weggeknipt en gewogen. 61 gram ben ik zeer tevreden mee🙂 Zojuist de eerste joint gerookt, de smaak is zoals je van Northern Light mag verwachten echt klassiek old school, kruidig, aardeachtig en het effect is op de bank hangend voor je uit staren. Na een maand in potten curen is de smaak nog voller en lekkerder. Growdiaries rocks, geweldige concept van een wereldwijde gemeenschap van kwekers.