Likes
Comments
Share
Likes
Comments
Share
🌱 Skywalker OG — Week 3 VEG Report 12/12 from seed | Vegetative phase ongoing General Overview Week 3 of vegetative growth ends with Skywalker OG performing exceptionally well. Both plants are growing in near-perfect sync, once again showing that environmental consistency is doing the heavy lifting here. Despite being grown in different containers (plastic pots vs Pro-Mix bags), there is no visible difference in growth rate, structure, or vigor. Rhythm, height, and development remain aligned — true twins in motion. Growth this week has been fast, confident, and clean. Growth & Structure • Stage: Vegetative • Flowering signs: None observed • Node count: ~6 nodes • Growth habit: Compact, fast, very controlled • Internodal spacing: Tight • Leaf development: Large fan leaves, dominant canopy At this stage, Skywalker OG is clearly prioritizing leaf mass and photosynthetic surface over branch elongation. Branches are present but still relatively short compared to leaf size — a classic sign of a plant building energy reserves before structural expansion. There are a few funky leaf expressions here and there — small personality traits rather than problems. Nothing concerning, nothing progressive, and nothing that requires correction. No training has been applied so far. ⸻ Container Comparison — Pot vs Pro-Mix Bag An important observation this week: There is no meaningful difference in growth between the plastic pot and the Pro-Mix bag. Both plants: • Grow at the same pace • Maintain similar height • Express similar leaf size and color This reinforces that, at this stage, root environment is equally supportive in both setups under these conditions. ⸻ Training Outlook While no training has been done yet, Week 3 observations suggest that training may begin next week to encourage lower branch development. The idea is not to force growth, but to: • Balance canopy dominance • Promote lower branch exposure • Prepare structure early and gently For now, observation continues. ⸻ 📸 Photo & Video Documentation This week includes both photos and a short video captured during the photo session. During the session, content from My Cheap Home Grow was playing in the background — a YouTube channel focused on home growing, sharing practical experience, open discussion, and solid grow knowledge. It’s a great resource with: • Passionate growers • Real-world setups • Honest learning environments If you’re into growing and learning from others, it’s definitely worth checking out. https://www.youtube.com/@cheaphomegrow7096 ⸻ Environment — Room Conditions (Week 3) • Photoperiod: 12/12 from seed • Day temperature: ~26 °C • Night temperature: ~18 °C • Relative Humidity: 60–65% • VPD: In optimal vegetative range • Airflow: Gentle, constant, non-stressful • Solution temperature: ~21 °C • Substrate temperature: ~21 °C Environmental stability remains consistent across the room. ⸻ 💡 Lighting • PPFD: ~600–700 (adjusted to plant size) • Plants continue to grow naturally into the light • No stretch, no light stress ⸻ 💧 Watering & Nutrition • pH: 6.0 • EC: 1.0 Nutrient program: • Plagron Terra Grow • Power Roots • Pure Zym • Sugar Royal Foliar: • Vita Race • Used selectively and intentionally Nutrition continues to support strong vegetative growth, lush color, and clean metabolism. ⸻ 🔍 What to Expect / What Not to Expect (Next Week) What to expect: • Continued vegetative expansion • Larger fan leaves • Potential start of gentle training • Increased lower-branch response once canopy opens What not to expect (yet): • No flowering initiation • No stretch explosion • No need to increase EC or push inputs Patience and observation remain the focus. ⸻ Final Thoughts Skywalker OG closes Week 3 as fast, lush, and confident. Tight internodes, big leaves, and twin-like behavior across different containers confirm that conditions are dialed in and the plants are comfortable. No rush. No force. Just strong foundations being built. Thank you to everyone following along and sharing this journey with us 🌱 FOR DISCOUNT CODES AND MORE JUST FOLLOW THE LINK https://website.beacons.ai/dogdoctorofficial 📲 Don’t forget to Subscribe and follow me on Instagram and YouTube @DogDoctorOfficial for exclusive content, real-time updates, and behind-the-scenes magic. We’ve got so much more coming, including transplanting and all the amazing techniques that go along with it. You won’t want to miss it. GrowDiaries Journal: https://growdiaries.com/grower/dogdoctorofficial Instagram: https://www.instagram.com/dogdoctorofficial/ YouTube: https://www.youtube.com/@dogdoctorofficial ⸻ Explore the Gear that Powers My Grow If you’re curious about the tech I’m using, check out these links: 🔆 Lighting & Environmental Control • Future of Grow — Advanced LED lighting technology https://www.futureofgrow.com/ DISCOUNT CODE: DOG20 • Lumiflora — Under-canopy LED lighting https://lumiflorade.com/ • TrollMaster — Environmental controllers and automation gear (past collaboration) ⸻ Genetics • Zamnesia Seeds — Genetics used in this project https://www.zamnesia.com/ ⸻ 🌱 Soil, Substrates, Boosters & Root Support • Plagron — Substrates, bio mixes, and supportive products https://plagron.com/en/ ⸻ 🎒 Storage, Curing & Preservation • Grove Bags — Curing and storage solutions https://grovebags.com/ ⸻ 📸 Photography Equipment & Tools (Not sponsors, but part of my creative toolkit) • Sony A6700 • Sony full-frame macro lens + few more • Stacking photography workflow - learning • iPhone (for behind-the-scenes shots) We’ve got much more coming as we move through the grow cycles. Trust me, you won’t want to miss the next steps, let’s push the boundaries of indoor horticulture together! As always, this is shared for educational purposes, aiming to spread understanding and appreciation for this plant. Let’s celebrate it responsibly and continue to learn and grow together. With true love comes happiness. Always believe in yourself, and always do things expecting nothing and with an open heart. Be a giver, and the universe will give back in ways you could never imagine. 💚 Growers love to all 💚 📸 P.S. – The Eye Behind the Lens All photos in this diary (for now — except for the ones showing the camera, which I took with an iPhone) are taken with a Sony A6700 paired with a Sony full-frame macro lens and a few more. Photography is part of the story — it’s how we share the fine textures, the glow, and the quiet details that words can’t always capture. I’ve also started experimenting with photo stacking — a technique where multiple images, each taken at a slightly different focus point, are layered together to create one perfectly sharp image from front to back. It’s not digital enhancement or AI; it’s pure photography — a way to reveal the plant’s beauty in microscopic depth, from trichome to petal. You’ll even see a few shots of "ghost me" capturing the shots — camera, lens, setup — because every grow deserves not just to be cultivated, but documented like art. FOR DISCOUNT CODES AND MORE JUST FOLLOW THE LINK https://website.beacons.ai/dogdoctorofficial NEW DISCORD - Official Server Invite Link : https://discord.gg/ksjAkA5T74
Likes
300
Share
@Ju_Bps
Follow
Hello growmies 👩‍🌾👨‍🌾🌲🌲, 👋 Veg is now over and let's go for the flowering, girls start to stretch and look happy 😊. 💪 Continuing Defoliation, lst, preparing scrog and daily fighting with this big leaves 😅 💧 Give water each 2/3 day And vaporise plant with water + Plagron Roots (1ml/l) 1.5 l Water + Roots + Bloom + Zym + Sugar Royal (1 + 3 + 1 + 1 ml/l) PH @6 💡Mars Hydro - FC 3000 50% 45 cm Mars Hydro Fan kit Setting 5 Have a good week and see you next week 👋 Thanks community for follow, likes, comments, always a pleasure 👩‍🌾👨‍🌾❤️🌲 Mars Hydro - Smart FC3000 300W Samsung LM301B LED Grow Light💡💡 https://www.mars-hydro.com/fc-3000-samsung-lm301b-led-grow-light Mars Hydro - 6 Inch Inline Fan And Carbon Filter Combo With Thermostat Controller 💨💨 https://www.mars-hydro.com/6-inch-inline-duct-fan-and-carbon-filter-combo-with-thermostat-controller Fast Buds - Tropicana Cookies FF🌲🌲 https://2fast4buds.com/us/seeds/tropicana-cookies-fast-flowering
Likes
5
Share
@Borberad
Follow
Die Mission Bubble Gum Sherb started– Eine Reise durch den genetischen Dschungel Willkommen, werte Chronisten, zu unserem nächsten botanischen Experiment. Unser heutiges Studienobjekt ist die Bubble Gum Sherb, eine feminisierte, photoperiodische Sorte von Blimburn Seeds, die das Versprechen auf reichlich Harz und ein intensives Geschmacksprofil in sich trägt. Ihr Name weckt sofort Erinnerungen an süße Klassiker, und ihr Stammbaum vereint die Genetik zweier legendärer Linien. Doch hinter den vielversprechenden Daten verbirgt sich ein kompakter Kraftpaket-Indica-Hybrid, der im Indoor-Anbau optimal betreut werden will. 1. Genetik & Stammbaum: Ein kraftvolles Fundament Die Bubble Gum Sherb entstammt einer gezielten Kombination der Genetik von Sunset Sherbet und Bubblegum. Diese Elternteile verschmelzen zu einer hochwirksamen indicadominierten Sorte, die stabile, kräftige Eigenschaften mitbringt. Das Ergebnis ist ein ausgewogener Hybrid, der die klassischen, süßen Züge seiner Vorfahren mit moderner, hochpotenter Züchtung vereint. 2. Wuchs, Größe & der Weg zum XL-Ertrag Dieses kraftvolle Exemplar behält eine kompakte Form bei und erreicht im Innenbereich eine maximale Höhe von etwa 150 cm. Dennoch liefert sie nach einer kurzen Blütephase von nur 8 bis 10 Wochen beeindruckende XL-Erträge von bis zu 550 g/m². 3. Aroma & Terpene: Wenn Beeren auf Erde und Zitrus treffen Wie der Name schon sagt, dreht sich bei der Bubble Gum Sherb alles um ein süßes und fruchtiges Geschmackserlebnis. Noten von Beeren und Zitrusfrüchten vermischen sich mit erdigen Nuancen zu einer äußerst zufriedenstellenden Erfahrung. Dies ist in erster Linie einer reichhaltigen Terpenmischung zu verdanken, zu der Beta-Caryophyllen, Limonen und Myrcen gehören. 4. Wirkung & Anwendung: Glückseligkeit und stundenlange Entspannung Die Terpene synergieren mit massiven THC-Werten, die zwischen 30% und 32% liegen können. Sie erzeugen ein euphorisches und entspannendes High, das stundenlang anhält und den Konsumenten in ein Gefühl tiefster Glückseligkeit hüllt. Aufgrund dieser enormen Potenz richtet sich die Sorte vor allem an erfahrene Genießer. 5. Spezielle Merkmale: Üppige Blütenstände unter genauer Beobachtung Egal ob indoor oder outdoor – die starken Indica-Gene zeigen sich in Form von reichlich Laub und üppigen Blütenständen. Da die Pflanzen eine enorme Dichte entwickeln und viel Blattwerk ausbilden, ist eine akribische Überwachung der Umgebungsparameter im Blütezelt unerlässlich, um Schimmelbildung bei den schweren Colas vorzubeugen. Mit dem professionellen Setup im Rücken sind die besten Voraussetzungen geschaffen, um das maximale Potenzial aus diesem Harz-Wunder herauszuholen. 6. Das Team Setup: Marshydro Pflanzregal 150 W • Maße: 35 cm x 95 cm x 150 cm • Beleuchtung: 3 Ebenen à 50 W • Belüftung: DIY-Vortex-Belüftung mit Mini-Lüftern 2.Hombox Ambient R120 • Maße: 90 cm x 120 cm x 180 cm • Töpfe: Stofftöpfe mit Bodenheizungen (stabil bei 22 °C) • Heizung: Im Zelt auf 26°C eingestellt • Luftbefeuchter: AC-Infinity Cloudforge T3 • Beleuchtung: ◦ Greenception GCX4PWR (180 W) ◦ Greenception GCX9PWR (360 W) • Umluft: 2x Mars-Hydro-Ventilatoren 1x AC Infinty-Ventilator Wind-simulation • Abluft: Prima Klima 125 mm, 2 Stufen (160 und 280 m³) • Klima-Controller: AC-Infinity Controller 69 Pro 3. DIY120X90 •Maße 120x90x180 • Töpfe: Stofftöpfe mit Bodenheizungen (stabil bei 22 °C) • Heizung: AC-Infinity Thermoforge T3 (angeschlossen an die Zelt-Zuluft) • Luftfeuchtigkeit & VPD: AC-Infinity Cloudforge T6 (über Schlauch in das Zelt eingeleitet), aktueller VPD bei 1,5 • Beleuchtung: ◦ 2x Greenception GCX9PWR (360 W) ◦ Steuerung: GC-Signal 2-Kanal-Steuerungsgerät für pseudo Sonnenauf- und -untergang (meist 30 Minuten) • Umluft: 3x Mars-Hydro-Ventilatoren (positioniert unten, mitte, oben), 1xAC-Infinty Claudray S8 • Abluft: AC-Infinity Cloudline T6 • Klima-Controller: AC-Infinity Controller AI+ Tag 0 Es geht für ca 20h zum Quellen in 1% H202. Tag 1 Das Sämchen kommt mit Wurzel nach unten in den vorbereiteten Easyplug. Tag 2 warten.... Tag 3 Sie kommt ans Licht, also ab mit Torf und ein bißchen Pilzen in den Easycube. Tag 4 Sie wächst Tag 5 Das Schlimmste ist überstanden. Tag 6 es gab einmal wieder Wasser mit Hesi Root Tag 7 Gamz schon groß die kleine.
Likes
21
Share
Flowering day 7 since time change to 12/12 h. Hey guys :-) The flowering started last week because otherwise the space in the small tent would end up being too narrow :-) Cuttings were taken from each phenotype beforehand. To change the flower, I rinsed it very lightly with clean fruits. With the next watering she gets a mix of grow liquid and bloom liquid before she only gets bloom. The heating mat works perfectly in the small tent and the parameters are all in the optimal range 🙏🏻👍. Now we hope that everything stays that way and that the cold days will slowly pass :-) . Everything was cleaned and checked. have fun and stay healthy 🙏🏻 👇🏼👇🏼👇🏼👇🏼👇🏼👇🏼👇🏼👇🏼👇🏼👇🏼👇🏼👇🏼 You can buy this Nutrients at : https://greenbuzzliquids.com/en/shop/ With the discount code: Made_in_Germany you get a discount of 15% on all products from an order value of 100 euros. 👇🏼👇🏼👇🏼👇🏼👇🏼👇🏼👇🏼👇🏼👇🏼👇🏼👇🏼👇🏼 You can buy this strain at : Clearwater Seeds Water 💧 💧💧 Osmosis water mixed with normal water (24 hours stale that the chlorine evaporates) to 0.2 EC. Add Cal / Mag to 0.4 Ec Ph with Organic Ph - to 5.8 - 6.5 MadeInGermany
Processing
Likes
31
Share
@Dunk_Junk
Follow
Day 49 - another week in the books. She grew over 2" this week.
Likes
12
Share
@Brujha77
Follow
Start Woche 4 Blüte Heute bekamen alle 3 wieder 20ml Green Bull. Ansonsten gibt's grad nix zu tun. Alle 3 entwickeln sich richtig schön. Grade #3 währ von Wuchs her n Keeper..
Likes
11
Share
Likes
40
Share
WEEK 12 - She is getting fat and frosty and she have crazy amount of leaves, so far Im happy how she is growing and cant wait to smoke her up
Processing
Likes
29
Share
I have been super excited with everything up to this point . I have made all my preparations that I think need to be made and did some trial runs on my environment. I starting preparing around the 15th of January and my set up was complete around the 19th of February. I spaced my purchases out based on budget constraints. I wanted a cheap and efficient grow area. Some thing I paid more for because through all the research I did I felt quality was more important. If you are as excited as I was, you get pretty anxious when awaiting order status when you first order your seeds. You should remember you are ordering from an online seed bank not amazon. Most work Monday - Friday and are in a complete different time zone. I ordered my seeds from seed supreme Seedbank. I placed my order on 31 January and mailed money as directed. This was the scariest part for me especially when I didn’t hear anything back. I finally received a email on the 12th if February saying my invoice was paid and then subsequently mailed out on the 15th and I received on the 20th. One thing I would like to note that recommend to anyone mail cash is to make sure you spend the extra cash and track your payment. I’m currently germinating all five GSC I received I placed them in water for the first 24 hours and then a paper towel for approximately 40 Hours. I’ll add links to most of the items I purchased below. Some items I purchased through offer up and let it go app to save money. VIVOSUN 48" X48" X 80" Hydroponic... https://www.amazon.com/dp/B07GNBCVPZ?ref=ppx_pop_mob_ap_share LED Grow Light 1000W Full... https://www.amazon.com/dp/B074MBP32M?ref=ppx_pop_mob_ap_share AcuRite 00613 Humidity Monitor... https://www.amazon.com/dp/B0013BKDO8?ref=ppx_pop_mob_ap_share Hydrofarm Grow!T Premium Coco... https://www.amazon.com/dp/B01DA4PZI4?ref=ppx_pop_mob_ap_share iPower LGTESTSOIL 3 in 1 Soil... https://www.amazon.com/dp/B075LRY5M7?ref=ppx_pop_mob_ap_share Unco Industries (WWSB15LB) Wiggle... https://www.amazon.com/dp/B00062KQ42?ref=ppx_pop_mob_ap_share General Hydroponics pH Control Kit https://www.amazon.com/dp/B000BNKWZY?ref=ppx_pop_mob_ap_share VIVOSUN Air Filtration Kit: 4... https://www.amazon.com/dp/B06XFRNPR8?ref=ppx_pop_mob_ap_share VIVOSUN pH & TDS Meter Combo, 0.05ph High Accuracy Pen Type pH Meter & +/- 2% Readout Accuracy 3-in-1 TDS EC Temperature Meter https://www.amazon.com/dp/B06XKMH86J/ref=cm_sw_r_cp_api_i_2xyCCbK4MKNN4 Botanicare CAL-MAG Plus Plant Supplement 2-0-0 Formula, 1 Quart https://www.amazon.com/dp/B004JKBMRW/ref=cm_sw_r_cp_api_i_LyyCCbY8SMFTK Century 24 Hour Plug-in Mechanical Timer Grounded https://www.amazon.com/dp/B00MVFF59S/ref=cm_sw_r_cp_api_i_ozyCCbHG8Q2PB Day 1 - 2/23/19: I planted my seeds today about a fingernail length down with tap root pointed and gave a light watering with plain tap water at a PH of 5.8. Day 2 - 2/24/19: Nothing new to report no activity on the surface, misted watering at 5.8 PH. Day 3 - 2/25/19: Plant number 1 which had the longest tap root broke the surface I started a time lapse on it to cover the first moments of birth 😭 daddy is already so proud lmao. I have another light watering today with my humidity domes on, the intent is to have the plants roots work to get the required water and hopefully promote root growth. I also added 1ml of Rapid start and diluted into 1 gal. Day 4 - 2/26/19: Checked the status this morning prior to work and two more have reached the surface only two more remaining which I suspect will reach by the time I make it home from work. Misted this morning pot was looking pretty dry with the exception of the humidity domes, which I removed on all the sprouted seedling. I intend on shifting to a 20 on 4 off cycle and starting my other fans. Day 5 - 2/27/19: All five plants have broke the surface. I did a normal watering this am still utilizing the dome to avoid watering on top of the plants. I lowered the light again some of the early sprouters we stretching a little more than I wanted and appeared leggy to me. Day 6 - 2/28/19: Nothing really to report today. Excited for the name reveal tomorrow. I did a light watering. I played around with my ppm meter and ec I definitely plan on using in conjunction with my first feeding this weekend. Day 7 - 3/1/19: Was watering this morning normal levels. I also mixed a new feed to be ready for them tomorrow. While I was watering # 5 fell over I accidentally tipped it with the spout. I grabbed some left over soul to help prop it up hopefully she is ok.
Likes
38
Share
@Roberts
Follow
Been fading great, and full of colors. Will be placing it in 48 hours of darkness today. Trichromes are really cloudy and about 10 percent are amber. Will update a video of harvest when done. Next update will be last one. Thanks again for likes, follows, and subscriptions. I appreciate the support. Happy growing everyone and be safe out there 👍
Likes
3
Share
Absolutely amazed by this genetic. Grew flawlessly and stacked some serious nugs. She ended up purping nicely and had reds and pinks as well. I've never grown something so greasy and the 👃 it's absolutely amazing!!! It's a very sour pine with a peppery lemon aroma.
Likes
8
Share
These two did great even through a lil stress they still came out on top. I almost want to run it back but I think it's time for something fruity maybe, maybe having a terpene profile that helps initiate a more stone heavy affect and be indica heavy.
Likes
3
Share
Poda apical hecha y brotes y hojas que no pintan na, fuera, a crecer 4 brotes con fuerza, que de estos sacaremos 8 y así sucesivamente. Buueno, pues para lo pocha que iba, y se ve que fue, está recuperando muy bien. Edito domingo 22/02: cambio de armario, de luces y de maceta. El armario es la leche, se nota la calidad joder jajajajajaja es de la marca Vevor, poco conocida de momento... Pero dadle tiempo, uso también su extractor y de verdad que funciona de lujo y muy silencioso. Las luces las tengo a 300W ya que es lo minimo pero bastante alejadas, a unos 40/50 cm. Les llega una media de 11,12k de ppfd. Y lo dicho, trasplantadas a maceta todas.
Likes
7
Share
LOLLIPOP!!!! TOP DRESS and get outside for the bloom phase!!!!
Likes
8
Share
Likes
3
Share
Always enjoy growing these awesome genetics looks like we're off to another great start with the first week
Likes
27
Share
High GD community, Week 8, Sweet Thai doing fine, but trips got to her 2, like all other plants, and now its waiting for the predatory bugs to arrive and do their thing. I think the best way ist to wait for the bugs to arrive, get them at work for minimum 2 says and only at that time, ill switch to 13/11. If everything comes on time, maybe thursday, but friday should be the goal. Ive ordered 100 bugs, needing 5 to 10 at each plant, so it will just fit the needs. When the trips invasion is defeated, the bugs need pollen to survive, so the small flowers in the plantmix is a plus for that. That will be it for this week boys and girls, Thanks for reading and passing by, Grow safe buds and feel free to check out my other ladies doing fine, 🙏🌿🌿🌿🙏