~ AirCube Active Oxygen Ebb/Flow System sponsored by GrowAce, featuring Strawberry Gorilla Auto by FastBuds ~ Well guy's and gal's here we go again on another exciting Autoflower run together! This time will be different as I will be doing a 'Hydroponic' run utilizing the AirCube Active Oxygen Ebb/Flow System by GrowAce, who were kind enough to sponsor me for this run, so it should be interesting to see what results I get and have some fun along the way! •Let me first tell you about this 6 Pot Ebb/Flow system from GrowAce: "The AirCube system is the one and only Ebb & Flow grow system on the market that combines the benefits of air pruning with a fully automated Ebb+Flow system! With the AirCube's proprietary fabric pot in bucket design, this system is guaranteed to outgrow any other Ebb + Flow system on the market. The results speak for themselves- grow MASSIVE roots that result in MASSIVE fruits! Air Pruning- Air Pruning only happens with fabric pots. As the roots reach the fabric walls of the pot, they penetrate and grow into the breathable fabric. Once penetrated, the roots are exposed to air, which causes the tips of the root to dehydrate and naturally prune themselves. This natural pruning process forces the roots to grow tons of lateral fibrous feeder roots. This results in a plant that utilizes the entire root zone and fills the entire pot with tons of roots. These fibrous feeder roots are incredibly effective in uptaking water and nutrients, resulting in a plant that grows healthier and more vigorously! Oxygen Benefits- Without oxygen, nutrient absorption cannot occur. On a molecular level, oxygen is needed to transmit nutrients across the cell walls and into the roots of a plant. With the AirCube's proprietary bottom lifted draining design, the system actively draws all of the water out of the bucket pulls vital oxygen into the root zone. Maximum Versatility with Any Grow Medium: The AirCube System is the only system on the market that allows you to use any growing medium you like. Use coco coir, soil, peat moss, perlite, vermiculite, hydroton, rockwool or any other medium you wish! This system is the most versatile Ebb and Flow bucket system in today's hydroponics industry. Temperature Control- with the fabric pots constructed with highly porous polypropylene fabric, heat dissipates easily and effectively. Unlike standard plastic pots, heat isn't trapped in the root zone. Heat in standard plastic containers can reach temperatures of up to 125 degrees. When this type of heat is trapped and unable to escape, it can damage your plant's health and limit the potential of your harvest. Growing in the AirCube System, plant roots grow cooler, healthier, and more vigorous. Largest Pots in its Class- this system features 5 Gallon grow buckets, the largest pot size of any other ebb and flow hydroponic system in the market. Modular and Expandable- start with 6 grow buckets and expand up to 36 grow buckets with the optional 105 gallons PopTank reservoir!" For my medium and nutrients I decided to also switch things up from my regular Organic runs, going with Plagron Nutrients and Root Royale 70/30 Coco/Perlite. When filling the fabric pots with medium, I first added just under a gallon of horticulture perlite from Nor-Cal as a base layer to ensure good drainage and then filled the remainder with the Root Royale. •Now for one of my favorites, and award winning strain from my friends at FastBuds... Strawberry Gorilla Auto: I'll be running Strawberry Gorilla Autoflower which is a 55/45 Sativa/Indica Hybrid. "ATTENTION ALL! Due to our continuous efforts in evolving our breeding process, we are proud to confirm that our Strawberry Gorilla Auto has now become one of the most potent autoflowers in the world! Paving the way to our recent success where she ranked on top & brought home the gold at the very first American Autoflower Cup in California. Moreover, she proved that not only modern autoflowers can compete with photoperiods, but they can even beat them in their field. At the most recent edition of the Farmer’s Cup and competing against various photoperiodic strains, Strawberry Gorilla Auto took home the title of 'Highest Combined Terpenes' in the highly sought-after 'Home Grow Hash' category, with an impressive 97.163 mg/g total terpene content! Our exceptional genetic selection's crowning Strawberry Gorilla Auto strain is a spectacular hybrid known for producing yields of up to 600 gr/m2 in 70 days. This is a very manageable grow that can reach heights of up to 150 cm - due to its magnitude we recommend it for more experienced growers, as a huge plant may be a little overwhelming for first-timers. This show stopping sativa heavy hybrid is perfect as an all day smoke, producing a taste bud tingling, pungent berry and diesel terpene-rich flavor combo that leaves you with a grin from ear to ear, a perfect choice for those looking for a day-and-night autoflower! "* *References: GrowAce.com, 2fast4buds.com ______________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________ The Setup: • AC Infinity 4x4 tent •AC Infinity Cloudline T6 Exhaust Fan w/ Controller 67 •HLG 650R w/UVA Bar *** For some reason GD does NOT have a listing for the USA version of the 650R so I selected the closest match to it. •AirCube Active Oxygen Ebb/Flow 6 pot System •TrolMaster Hydro-X Controller for light •AutoPilot APC8200 co2 controller fed by a 50# tank •16" Hurricane oscillating fan and 8" floor fan •Tent cooling via filtered outside air delivered by AC Infinity Cloudline T6 fan •BlueLab instruments: PH Pen and Truncheon Nutrient Meter ______________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________ Weekly Updates: 10/10- Here we go again with another killer strain from FastBuds, Strawberry Gorilla! I went ahead and germinated 4 seeds originally by first soaking in a glass of tap water for 12 hours then placing in pre-moistened Peat Pellets, of which all four were successful. Two however looked like they they might not make it, so I germinated 3 more by first soaking for 12 hours, then placed on moist paper towels for 48 hours. I checked them on the third day and all had sprouted. I then planted the additional 3 seedlings next to the ones already in pots and will wait 5-7 days to see which look the best, then cull the 3 'losers'. 10/12- Yesterday, I went ahead and ran the AirCube system manually today to give them their first feed. I have the reservoir filled with 60L of well water which was adjusted to 6.2ph @ 75℉. I then added 60ml each of Plagron Cocos 'A' and Cocos 'B' and 30ml of Plagron Power Roots to the reservoir and, after mixing thoroughly, readjusted the ph to 6.3 @ 75℉. I then ran the AirCube system on the 'Fill' setting for 10 minutes. While the system was filling the pots, I used a soil hydrometer to monitor the moisture level in the medium to make sure that I had the floats in the 'Brain Bucket' that control how much solution flows through the system adjusted correctly. Everything worked flawlessly with all of the pots getting saturated, then fully drained... excellent! 10/14- I ran the AirCube system again today after checking the ph of the reservoir which had risen to 8.0 due to off gassing of CO2 which occurs because of the large air stone I have in the reservoir to oxygenate the water in it. I adjusted the ph to 6.2 using SaferGrow's PH Down which BTW I love! After adjusting the ph, I ran the system manually for 10min, then drained it. I have the HLG 650R hung @ 28" above canopy and have it set to 45% power on a 19/5 cycle via a TrolMaster HydroX Controller. Tent temp's are running 80-82℉ with the lights on, 74-75℉ during the dark cycle. RH is being maintained by a 1.5g humidifier at 63% currently resulting in a 1.41kPa VPD. 10/17- Well there goes the first week for these three girls and so far, so good! They all have good color and leaf structure and I'm just waiting for them to take off now. I ran one manual feed cycle today for 15min upping the ppm's to 700, then drained the pots. I'll start gradually increasing the feed schedule along with the ppm of the nutrients starting next week... See you there!💚

26 18/7/20 And.. She's topped! You can see the video of the procedure. Now let's hope everything will be ok! 27 She's doing fine, no signs of stress at all. So today I gently bent her to start with lst since she's already showing pre flowers. 29 Today I added mulch! I used shredded straw and grass clippings. I also upgraded her lst. I love using natural elements as little sticks to help with lst! Unfortunately with the mulch the photos are a bit confused. And today we had a little friend, a bumblebee! 🐝 as far as I know, there are no other outdoor cannabis plants in the surroundings so I'm not afraid of accidental pollination. She's clearly concentrating on her 2 new "tops".

🌱 Week 1: The Journey Begins! 🌟 Hey Grow Fam! 🙌 We’re off to an epic start with our TrolMaster adventure, and I’m already feeling the love for the setup, the seeds, and the growth happening in the room! So, let’s dive right in and get into the details of this exciting week! 🌿 Germination Update: Our first Gorilla Melon seed from Fast Buds didn’t sprout, but no worries—round two was a success! 🦍🍈 The second seed has germinated and is looking full of potential. I’m throwing in a Sweet Seeds Papaya Zoap into the germination station too, so we’re keeping this exciting lineup going strong! Germination is such a key part of the journey, and having a healthy start is what it’s all about. 🔧 Room Build & TrolMaster Setup: The build is coming along beautifully, and I gotta say, the TrolMaster system is blowing my mind! Everything’s under control like magic 🎩✨, and the TM+ app? Wow, just wow. I mean, I can literally be in the bathroom and still keep an eye on the plants—check all the metrics, adjust settings, and fine-tune what I need, all from my phone! 😂💧 This level of control is next level. I’m loving how smooth and seamless it makes managing the room. The gear is just unreal, and seeing it all come together is truly something special. 🌱 Nutrition Talk: As for feeding, we’re starting light but smart! I’ve begun with 0.15ml of Regulator and 0.25ml of Startbooster per liter for now. I always believe in starting easy and ramping up as the plants develop. These early stages are crucial—balance is everything. For the time being, I feel this is more than enough to keep the babies happy and healthy. 🌿💧 The Regulator is working wonders in maintaining plant structure and health, while the Startbooster is fueling the early root and vegetative growth, laying down a solid foundation for the weeks to come. It’s about getting it right from the start—too much too early can be a killer. Keeping it steady with precision, that’s the goal! Big Shout-Outs: To the amazing team at @TrolMaster, @Fast_Buds, @Sweet_Seeds, @AptusHolland, and all the incredible sponsors—I’m beyond grateful for the support! 💚 And to my GrowDiaries fam and followers, you guys make this journey what it is—thank you for the love, and I’m so honored to have you along for this ride. 🙏 We’re just getting started, and I can’t wait to show you what’s next. Stay tuned for more updates, epic builds, gear reviews, and plenty of insight. Don’t forget to follow me on GrowDiaries, YouTube, and IG for exclusive content, and let’s make this grow the best one yet! 🌿🔥 Growers Love to All 💚💚💚 P.S.- A deep dive into the Full Spectrum Quantum Sensor (MBS-PAR): The Full Spectrum Quantum Sensor (MBS-PAR) is an essential tool for any serious grower looking to optimize their light environment. This sensor measures photosynthetically active radiation (PAR), which refers to the spectrum of light that plants actually use for photosynthesis—typically between 400 and 700 nanometers and more depending . What makes the MBS-PAR sensor special is its full spectrum capability, meaning it accurately detects not just visible light but also far-red and UV light—which are crucial for maximizing plant growth, development, and flowering. With this tool, I can monitor the exact intensity of light my plants are receiving, making sure they’re getting the optimal levels for every stage of growth. By using this sensor in my grow room, I’ll be able to ensure that the light distribution is uniform across the canopy. Plus, it allows me to fine-tune the light output from my ThinkGrow LED setup, ensuring my plants are thriving under the best conditions. Whether it’s increasing light during the vegetative phase or fine-tuning it for flowering, the MBS-PAR sensor helps me keep everything on point. And the best part? I can monitor it all through the TrolMaster app, ensuring I can make adjustments whenever needed—even if I’m not in the grow room! This level of precision means healthier plants, better yields, and maximum efficiency. It’s a game-changer for taking the guesswork out of lighting and getting closer to growing perfection! 🌱💡 Growers Love to All 💚💚💚

Made it 67 days before the chop. •••03/21/2020 After a 6 day hang I've trimmed and started to jar cure. Had a total flower weight of 85 grams. Over all I'm pleased. Will update with a smoke report in about 3 weeks.

Hallo zusammen 🤙. Sie wächst sehr schön und macht keine Probleme

Hello friends and followers, Welcome to my weekly update. 3/3-9 This has been a good week for learning. 1) Autos do not tolerate high stress training. Don't do it unless you are sure of yourself. I topped too late. This reduces yield, stresses the plant and delays harvest by a week. 2) Too much of a good thing is not good. My Teapot gal has a copper excess (I believe) and unless I take her out of the copper pot, she will continue to be stunted. Everyone needs a bonsai in their garden, so I'm going to grow her out. 3) Know your plants. Other than Zkittles, my grows have been a 4 plant variety using only 1 seed per strain. Without a comparison, you don't know what to expect. I have looked at other gromies gardens for appearance, size etc. Everyone grows differently with their multitude of nutes and high-tech equipment that it's fair to say that I have to base any improvements in my grow only on what I have done in the past. Let the stacking begin; we are off and growing buds. RQS says harvest 70-75 days or 40-45 days of flower. My calculations – harvest of T3 will be April 13-18 and T2 15th-20. Based on the size of my gals, and the number of bud sights, I’m only estimating an ounce between both plants. This is one time I hope I’m wrong. For these Titans, I water 1- 2 liters every other day. Most of T2s (teapot gal) water (1ltr) runs thru to the bottom catchment. I leave it on the towel to keep humidity around the pot. T2 grew .5 inches and now shines brightly at 3 inches, T3 is 7. I topped my T3 last week after she started flower. Big Mistake. Autos can be HST only in week 2 and never in flower. If you remember my week 2 stats, neither girl was over .5 inches tall and only T3 had the second set of true leaves. There wasn’t any growth to even begin training. Know your plant. Here I should have chsnged.my grow plan and.not done any training besides defoliation. T3 in the 3-gallon air pot is larger at 7 inches now. I did a bit more lst on T3 tying branches down. The leave branches are at the most an inch long with most smashed up against the main stem. I also put a separator between the top 2 buds to give a bit of space. The stem on T3 is thick for being so small. A solid ¼ inch. If this gal was growing to her estimated height of 60cm, the main stem would be over an inch, like my Apollo grow. I will say for sure the RQS F1s are strong and sturdy. With T2’s stretches her tippy top is just peeking above the copper pot rim. She is towering at 3 inches. I keep supplementing and foliar spraying with Cal-mag but the internodal chlorosis is still visible. Despite separating the copper pot from the soil with coco liner and coffee filters, I think Teapot gal (T2) has a copper deficiency. ✅️ Slowed Growth, ✅️ Fewer branches ✅️ Internodal Chlorosis ✅️ Stumpy roots (I won’t see this until I harvest and reveal the root ball). I'll show pics at that time like I have with my other diaries. Given these RQS Titan are F1 hybrids and should be stable, I believe the height and the health differences are attributable to the copper wire teapot. They are in the same soil, same tent environment, same nutrient solution, same light, same everything except the growing container. As I stated in previous discourse, I expected the overall plant to be smaller than T3 simply based on the pot size but did not expect to see such size differences so early, not to mention the nutrient issues. Thanks for the likes and comments, I appreciate all the plant love💚. Have fun & love what you grow 💚 Sending love and light 💫 💫Natrona 💫 **************Sponsored Grow*************** Royal Queen Seeds is the first to off genuine F1 cannabis seeds. F1 hybrids are the future of cannabis genetics, offering unrivalled stability, vigor, and yields. They have eight (8) F1 hybrid strains including a CBD. Unlike regular hybrids, which can be created by crossing virtually any two cannabis plants, F1 hybrids are made by crossing two pure (also known as "inbred") genetic lines. The resulting seedlings not only grow bigger and stronger, but also maintain stable growth traits that result in a uniform crop. I would like to express my sincere thanks to @James at @Royal Queen Seeds for giving me this opportunity to grow their quality seeds. It was a hard decision to select the strain to grow; I’m excited to grow Titan F1. ==================================== Royal Queen Seeds Https://www.royalqueenseeds.com use Discount Code use **GROWERS20** for 20% discount Titan F1 stands out as one of the most potent options in F1 hybrids. Thanks to her genetic lineage, she produces sky-high levels of THC and boatloads of delicious terpenes. Plus, plants reach modest heights while churning out impressive yields. Talented breeders created this F1 by crossing inbred lines that share a heritage with Blue Dream, Sugar Magnolia, and Amnesia. Effects, Flavors, and Aromas of Titan F1: Powerful Effects and Sugar-Citrus Notes Titan F1 will treat your olfactory system throughout the flowering phase, and beyond. This auto flowering variety unleashes a powerful terpene profile consisting mostly of myrcene, farnesene, ocimene, pinene, bisabolol, and limonene. Combined, these aromatic compounds offer notes of fruit, candy, and lemongrass. With the highest THC concentration within our F1 hybrid range, Titan F1 exerts a powerful and fast-acting effect that melts the muscles and clears the mind. Perfect for enjoying after a long day at work. Growing Titan F1: Stealthy, High-Yielding Plants With an average height of 65cm, Titan F1 can grow just about anywhere and maintain a low profile. This bushy plant features an indica morphology, a huge trichome count, and develops into a mature specimen in around 73 days from germination. Gear up for a uniform, consistent crop that will thrive in practically any environment.

Wow, they are growing! Began LST on day 26 and have been working them daily. We did run into our first speed bump. Noticed that some newer growth near the tops of the plants had white/yellow tips on leaves. Using a CMH, I was concerned my light was too close. I moved the light up quite a bit but continued seeing new growth with this problem. Realized it was likely minor nute burn from FFOF... wow it really is as HOT as I have heard... something to consider on future grows. I have left the light up higher though, as I read multiple accounts of people using CMHs near top of tent with no negative effects. To this point, I have seen no stretching or anything that would cause me to lower the light. I did do a light cal/mag feeding once this week but do not believe it has anything to do with the burn. Reading other grow diaries for this strain, and using RO water, I wanted to begin feeding at a low ppm. Maybe not the best idea considering, but we live and we learn. Photos/video are day 29 since breaking the soil.

Na

Just finishing up week 3 of flower. Did another defoliation on day 21 but you can’t tell now...lol everything’s been rolling along nicely so far. Been feeding them around 8 gal of water every 2-3 days. Well that’s it for now, easy growing so far! Cheers 💨

As an Auto she has been the most finicky plant ive ever grown. EXPERIENCED GROWERS ONLY!!!!

Second topping on day 28! 1 more to go! Will include all details once done with topping (going for mainline). Photos/video taken 28 days after breaking soil.

Waited 5 days for soil dry and cannazym to arrive. Watered ¾qt today. Will monitor soil moisture levels a little closer. Also going to recalibrate both of my ph meters. More pictures to come, waiting on the lights to kick on. Suggestions appreciated! Happy growing!

the weather in my part of germany is really bad for this summer at the moment. it's raining too much. i've put them in a dry place to prevent mould from forming. maybe they're not getting as much fertiliser. they'll get one more week and then they'll be harvested.

LIVING SOIL!!!! WOW SUPER CONTENTO! dentro de la bolsa hay recolecion de organismos indigenas IMO2 mezclado con sustrato growers tmb melaza de caña y la verdad no mido cuanto de ferti pero le pongo mas bioblom q biogrow hasta llegar a 600pmm y el ph queda en 5 6 pero luego del fermento de 24hs se estabiliza en 7 para flora increible uso levadura de mi masa madre q tengo hace 5 años y los lactobacilos de mi yogurt el suero todo dentro del té ! curo todas las deficiesias la AK esta viva y la choco increible! la cannalope x skunk de Yeruti seeds SON DE OTRO PLANTEA! UN GUSTO A CITRICO MANGO CON NARANJA WOW

10/29/19 - All is going good. The stretch always amazes me on how fast they grow! Watering 4 cups of water each plant every three days. I did not switch to 13/11 yet. I will do that the last few weeks. I moved the lights up to compensate for the stretch so lets see what that does. 10/31/19 - Moved the one that is not flourishing from the net to the side. The other are rocking the house!!! Did a bunch or rearranging and LST in the net. Should be set this week to leave it all alone. I also did a bunch of defoliation. Too bad I was not going to clone this strain anymore, cause there was some great cuttings. 👌

SATIVA DREAM by KANNABIA Week #16 Overall Week #1 Flower This week she's looking great got her newly started buds and a nice color to her so far she's dealing with the elements!! Stay Growing!! Kannabia.com SATIVA DREAM

She had her last fed last night, microscope shows a few oranges so I think it the final week/10 days hopefully flush time! Oops forgot the videos

02-10-2025 il ya eu un peu plus de soleil que d'habitude. la météo est entre 15 et 20 degrés. je dirais que tout se passe bien pour l'instant. la plante en pleine terre à 2 semaines de retard comparé à celle en pot.

More growth plus added co2