Likes
Comments
Share
@Hempcules
Follow
WEEK 5 This last week of vegetation went wonderfully for my Fume Pop. It responded perfectly to topping and developed a very balanced canopy. Over the course of the week, I already trimmed and defoliated the lower parts a bit to keep the focus on the strong shoots. By the end of the week, I was also able to spot the first pistils. I’m now looking forward to the flowering phase and hope everything continues to go as well as it has so far. PPFD: 500µmol/m²/s Water: 2x water 1x nutrient solution Vpd: 1,2Kpa
Likes
2
Share
Rastliny reagovali dobre, bez známeho stresu. Ďalšia zálievka bude čistou vodou, v nedeľu (19. 10.) plánujem opäť pohnojiť zvýšenú dávku Fish Mixu podľa odporúčaní BioBizzu na druhý týždeň. 🌱 2. týždeň / 13 deň – Hnojenie a zosilnenie svetla 💡 Nastavenie Svetlo: Vipar spectra PRO 1000 LED panel pri 80 % výkone Fotoperióda: 20/4 Teplota: 25 °C deň / 20 °C noc Vetranie: aktívne + cirkulačný ventilátor (jemný 10 pohyb stoniek.26 ) 2025) Dávka živín (ml/l) Zmes pre ryby 2 ml Bio Heaven 2 ml Acti Vera 2 ml CalMag 0,3 ml pH: ~6,3 Voda rovnomerne rozložená okolo každej rastliny (približne 300 ml na kvetináč). Substrát mierne vlhký, bez odtekania. 🌿 Poznámky k rastline Titan – Silná a kompaktná štruktúra, tmavozelené zdravé listy. Perfektne reaguje na terapiu svetla. LSD-25 – Krásna farba, symetrický rast, začína vykazovať mierne fialový odtieň – sľubné pre fázu kvitnutia. Gorilla Zkittlez – Vertikálne sa naťahuje o niečo rýchlejšie, je energická a šťastná. Žiadny stres ani nedostatok. 🔆 Pozorovania ✅ Rastliny vyzerajú veľmi zdravo, majú sviežu farbu a silné stonky. ✅ Intenzita svetla 80% zatiaľ úplne vyhovuje. ⚠️ Ak Gorilla alebo LSD dosiahnuť siahať vyššie, zvážte čoskoro mierny ohyb LST. 📅 Ďalšie kroky Ďalšie zavlažovanie: iba čistá voda Ďalšie kŕmenie: utorok–streda (28.–29. októbra) Date: 29.10.2025 💡 Light: 80% power, distance 50 cm Temp: 25–26°C | 💧 RH: 55–60%
Likes
8
Share
Nothing major happening I just started the mainlining process I'll keep you guys posted
Likes
43
Share
Hi everyone 🤗. They made an extreme surge in growth last week 😀. This time I decided to leave only one plant per row. There are now three in total. This week the new network will be set up, in which I will introduce it. I think I will give them a maximum of 1 week of growth before they bloom :-). I wish you a good start into the week, stay healthy 🙏🏻 and let it grow 🌱 You can buy This Strain at : www.Zamnesia.com ☝️🏼☝️🏼☝️🏼☝️🏼☝️🏼☝️🏼 Strain Gelato clone from mother (Zamnesia ) ☝️ Genetics: Wedding Cake x Gelato x Gelato 33 👍 Vega lamp: 2 x Todogrow LED CXB3590 COB 55 W 1 x Sanlight S2W 62 W 💡 Flower lamp : 2 x Todogrow LED CXB3590 COB 55 W 1 x Sanlight S2W 62 W 💡 ☝️ Grow Aero System : Growtool 0.8 ☝️ Fertilizer: Canna Aqua Vega A + B , Canna Aqua Flores A + B , Rizotonic, Cannazym, CANNA Boost, Pk 13/14, Canna Cal / Mag, Canna Ph - Grow, Canna Ph-Bloom ☝️🌱 Water: Osmosis water mixed with normal water (24 hours stale that the chlorine evaporates) to 0.2 EG. Add Cal / Mag to 0.4 Ec Ph with ph- to 5.5 - 5.8 💦 💧
Likes
5
Share
For a couple of runts I think I'll end up with a couple of blunts! Tight little buds. Lots of resin and great scent. I kind if wish I could just keep them going but they are nearing the end.
Likes
14
Share
@Terpyboyz
Follow
Hi everyone thanks for stopping by 🙌🏻 So this is week 8 of vegetive stage almost complete 👌🏻 - I’ve had some hesitation holding of on flowering for all a good few reasons - Clones ✔️ starting to get most of them up to a decent ppm as I’ve had few N defs/calmag difficulties all in check now ✅ We’ll be setting up the second 2.4 grow tent, for the clones & others to veg for a week or so then get them into some 20litre 👞 Start flowering them the week after give or take 💪🏻 for this tent im going to add in a 12litre or 20litre dehumidifier to keep RH in check.
Likes
92
Share
The Greenomatic doing Good Getting bigger and the buds are devoloping. Nothing Special Happend . Just doing my Narcos Organic Nutriets every water theye gaining . Water : 2-4 Liter every 1-2 days 19hour light 200 watt light 20liter pot 28 day Temperature 55%Humidity
Likes
5
Share
stiamo arrivando alla fine
Likes
7
Share
VERY HAPPY WITH THE GROWTH THIS WEEK. HAPPY WITH ALL THE BUD SITES THAT ARE SHOWING UP. PLANT 1 IS 26.5 INCHES TALL AND PLANT 2 IS 18 INCHES TALL. NO SMELL YET.
Likes
14
Share
@BLAZED
Follow
Week 4 (21-2 to 27-2) 21-2 Temperature: 25.3 degrees (lights on) 20.4 degrees (lights off) Humidity: 63% (highest) 49% (lowest) Watering: None. 22-2 Temperature: 25.9 degrees (lights on) 19.8 degrees (lights off) Humidity: 64% (highest) 49% (lowest) Watering: Both 1500 ml. Light 60% at 60 cm, LUX: +/- 15.500 Today i gave them both their first real feed of 1.5L 1.5 Liter water + 0.75 ml Calmag + 0.3 ml Silica + 0.45 gram Grow. EC: 0.7 PH: 6.0 23-2 Temperature: 29.4 degrees (lights on) 19.6 degrees (lights off) Humidity: 66% (highest) 49% (lowest) Watering: None. No pictures. 24-2 Temperature: 23 degrees (lights on) 18.8 degrees (lights off) Humidity: 65% (highest) 51% (lowest) Watering: None. 25-2 Temperature: 23.8 degrees (lights on) 19.7 degrees (lights off) Humidity: 61% (highest) 49% (lowest) Watering: None. Removed some leaves. 26-2 Temperature: 23.6 degrees (lights on) 19.7 degrees (lights off) Humidity: 65% (highest) 46% (lowest) Watering: None. 27-2 Temperature meter was broken, so no temps etc for today. Watering: Both 2000 ml. Today i topped the plants and gave them both 2L. 2 Liter water + 1 ml Calmag + 0.4 ml Silica + 0.7 gram Grow. EC: 0.8 PH: 6.0 I fully installed the AutoPots and their base aswell, wich get connected to a water reservoir.
Processing
Likes
10
Share
@yaron
Follow
starting week 6,the wedding cheesecakes are in flower for a couple of days now and the gg are starting to flower. alot of wind and clouds and rain these past two weeks but the girls are looking good in my opinion. update:after 4 or 5 days of rain and low temperatures finally the re is sunlight so the girls have to recover a bit. but things are looking better wheatherwise. cheers!
Likes
5
Share
Likes
1
Share
@Xpie77
Follow
Purple Punch is a popular cannabis strain known for its potent effects and fruity, dessert-like aroma. Its genetics are rooted in a cross between Larry OG and Granddaddy Purple (GDP), two highly regarded strains in the cannabis world. Here's a breakdown of its genetics: Parent Strains 1. Larry OG Type: Hybrid (Indica-dominant) Origin: Derived from OG Kush, a classic strain with a strong, earthy, and piney aroma. Effects: Known for its relaxing and euphoric qualities. Larry OG contributes to Purple Punch's calming effects and robust growth structure. 2. Granddaddy Purple (GDP) Type: Indica-dominant Origin: A cross of Purple Urkle and Big Bud, GDP is famous for its deep purple hues and sweet grape-like aroma. Effects: Provides sedative, body-heavy effects. This parent is responsible for Purple Punch's vibrant purple coloration and sweet, fruity terpene profile. Purple Punch Characteristics Type: Indica-dominant hybrid (80% Indica / 20% Sativa) THC Levels: Typically ranges between 18-25%, making it potent but manageable for most users. Flavors and Aromas: Sweet, fruity notes reminiscent of grape candy, blueberry muffins, and Kool-Aid. Effects: Starts with a euphoric cerebral high, followed by deep body relaxation and sedation. Medical Uses: Popular for treating insomnia, stress, pain, and lack of appetite. Growing Information Difficulty: Moderate; suitable for growers with some experience. Height: Medium-sized plants with dense, bushy growth. Flowering Time: About 7-9 weeks indoors. Yield: Moderate to high yields, especially with proper care and nutrients. Appearance: Striking purple hues, dense frosty buds covered in trichomes. Purple Punch seeds are highly sought after by both recreational and medicinal users, thanks to their unique genetic makeup and well-rounded effects.
Likes
18
Share
June 7 - We ordered some new lights last week, they are 240w kingbrite samsung lm310h with uv/ir, 3000k, and meanwell drivers. We setup the new room and moved the girls into there. After a bit of LST and a watering (with nutrients) at roughly 7ph, they were ready to go under the 2 new lights and the same SF-1000 we have been using in this grow. The new room is a 12 ft enclosed trailer. I moved everything from the small tent into this. I put clear poly on the walls, floor and ceiling. I put poly on the shelf I am going to be keeping in there as well. I bought 50ft of 6mm mylar and lined the floors, roof and sides with it. I plan to get some reflective tape to seal everything and to cover the wood. I did not get much of a chance to watch temp's today as they it was later in the evening after all was said and done. The inline fan blowing in air from outside. June 8 - 9 AM i checked the plants, they were at 25.2 and 50% RH. Late through the day I had checked and we had gotten up to around 32 degrees. So I moved the inline fan to the closer vent, hooked up to that, and had the air blowing out of the trailer with the inline fan sucking it from above the lights. I then added oscillating fan and had it blowing air on the left side of the room so it would somewhat circulate once I closed the doors. I then checked at about 9pm and we were at 22 degrees. Definitely noticed a decent amount of growth already. I have the lights on a 22/2 cycle as I was worried about the heat at night time. June 9 - Some great growth from the girls, still having problems controlling the temps in the afternoon. I decided to prop the door open a bit to have a constant breeze throughout the day while I am at work. Decided to do some more LST and also a bit of defoliation. I took about 25% of the leaf's that were blocking the new growth as it was getting a bit bunched up. I was then told the leaf's are almost solar panels for them. So from now on I will be trying to just do some tucking unless needed. The leaf's I removed were most of the damaged leaf's, I am not to sure if that makes much of a difference. I gave them a watering with only water as there is a potential I am getting a bit of a nutrient buildup along with the PH problem. Or potentially the reason for the ph problem is nutrient buildup. After watering with A PH of 7 I got some run off and tested it. The smaller plant gave me a PH of about 5.5 where the bigger one is around 5.0. June 10 - Plants are looking happy and showing tons of growth. Seems to be trying to stretch outwards. Not a ton of sign of PH issues showing so potentially getting it under control. Still a bit of damage to previous leaf's but it is what it is! The last few days I have been leaving the door open a bit in order to keep the temps down. I decided to test something and turn the lights off (automatically) at 11AM and back on at 5PM so light schedule has now changed to 18/6 and it seems I may have figured out the issue. We haven't had lots of sun the last couple days so it hasn't been to hard and I have yet to know if it truly fixed the heat issue for now. (I will be looking into a ac unit as well since it typically gets to around 30-35 around here. June 11 - Pulled some of the branches back down and added a few more LST spots. Seems we have a good amount of growth from the smaller plant out of the 2 topped spots. Unfortunately it looks like I fucked up on the bigger plant and only one of the nodes seems to have new growth. I will continue to monitor that but I think I cut the node to low and also to soon. Other then that, the girls are doing great. They seem to be absolutely loving these new lights. I gave them some nutrient water today as well. roughly 3L each. They seem to be A hell of A lot more thirsty under these new lights. June 12 - The girls are doing great , they are still just doing growing away. Lots of progress everyday. I am going to be getting a go-pro so I can set-up a time-lapse for the rest of this grow. I received my new inline fan, I got A ac infinity CLOUDLINE T4 with the temperature humidity controller. I am going to be having one fan pushing fresh air in and one fan pulling out the hot air. I will be doing that tomorrow since I have to work today. June 13 - I ordered another 50ft of mylar and that showed up today. I have decided to remove the shelf and add another 3+ feet to the grow space. So today I installed more poly, mylar, the ac infinity fan. I have it set-up to pump in air if it gets to warm. I am thinking of switching it to the output that way if it gets to hot or to humid I can have that air pulled out of the trailer. Right now my other inline fan is the outtake and I just have it set on full. Overall I think everything is set-up a bit better and more accessible. I will be putting my 2x2 tent in there at the left of the doors so I can have a veg room when these 2 are in flower. I plan to have 4 in veg and 4 in flower for the next grow. Still waiting on JOTI seeds, ordered 3 weeks ago and still have not been shipped. I will be getting those going the moment they arrive. The girls seem to be happy still, did a bit more LST to try to keep everything even, mainly I'm just pulling down on the spots I already have tie wire on.
Likes
3
Share
Likes
18
Share
@CANNASIM
Follow
Have fliped the switch to 11/13, as suggested by Dj Short, the blueberry strain creator. I’m experimenting a bit with light schedules, in veg I have used 6/2 x3 , so the lighting was divided in equal periodes of 6 light 2 dark, that provided a more stable climat, girls responded well. The ignitor to try that was a few articles that suggested the plantas have a limited amonth of light that can be processed and that helps absorb and process more since they have fragmented rest periods. I’m wanting to experiment with some deep red diodes, IR and UVA diodes. I have taken some clones of this mistery strain that is growing great, and the veg tent will be their home for two months Until I harvest the girls. The HLG leds are working great, and was very fun to build, I’m not sponsored by this guys, by the way, but the outcome is just amazing by what I has used to... My next DIY project is a Aeroponics cloner machine!