7/20 Went over this morning to plants soaking wet and heavy rain. Went back around 4pm and plants actually look really good. The rain has stopped for a bit and the girls looked great. Apart from some septoria leaves I needed to defoliate on the first plant I treated. I also noticed a few others on other plants so it's spreading albeit slowly. I treated the three in the middle with their second dose of Plant Doctor at 3tsp/1gal. One gallon administered to each plant via root drench. I think I may treat the other plant showing signs with a diy Dr. Zymes using citric acid as the active ingredient. That way I Gould start treatment right away without having to rely fully on plant doctor. Plus it would kill any pests. Ive seen damage but the birds do a number on them. I dont want to spray my plants with a bunch of chemicals if I don't have too. I shouldve replaced the pallets and cleaned the cage better. I think I did a good job sanitizing as I have no wpm. Just this septoria I probably got when the lady mowing the lawn cut all tjis fucking grass and blew it in my pen, throwing bird seed and I'm sure tons of disease into my grow bags. I literally had to harvest a bunch if fucking sunflowers. It looked like my plants had been mulched. Just with small disease carrying shrubs. At some point some of this stuff has to be on purpose. You CAN'T be that stupid. A couple kushes in the back look hungry. I think I may need to up my feed. I've written to much. I'll keep this updated. Thanks if you made it this far. 7/21 I guess it rained last night. Oh well. It was blue skies for hours before dark. It must've rained late/early morning. I'm sure the app of plant doctor will be fine. Like I said I'm considering using citric acid as a foliar spray to help with the septoria and clean up any pests. I don't have enough pests to warrant spraying. I just don't want to put all my eggs in the plant doctor basket. Today is overcast and windy. The wind has really assisted in spreading this virus. I remove anything I see infected immediately and since these plants are reveges they have plenty of leaves. Plants are really stretching. I know I talk about the septoria a lot but realistically if someone looked through my garden they'd have a hard time spotting it. I don't want to exaggerate the problem but I don't like dealing with ANY fungus or molds.

Die volle ist bruc benner die andere Papaya frostig langsam werden die immer besser die Papaya werden größer ist jetzt bei 149 die bruc auf 120

Clementine Slush #4: She is lagging behind the rest of the 5-gallon gals and is the weakest in the tent. Hopefully she will pick up post- transplant, but weak doesn't mean she won't be beautiful. Nothing experimental with this one though, we will just start some LST heading into week 6 and her 5-gallon vegetation. Tent-Wide Updates: Transplant Week! I've been looking forward to this week since the start of the grow. Transplant week always brings a bit of stress, but also brings a beautiful final tent product, where each plant is in their final home. 4 of the plants will be in 5 gallon Geopots, and 1 will be in a 3.9 gallon Geopot. They will all feed from the same reservoir once our roots are established, but with those 5 gallons pots, it will be a few weeks minimum before we are established enough to flip to flower. For my coco mix, we are keeping the same ratio of 70/30, and will do a Xtreme Mykos sprinkle in each root hole and on each root bundle. However, I did something new for this transplant: I incorporated Stash Base directly into some mixed coco, and strategically placed that enhanced coco around the root balls, around 1 inch think, and along the top third of each pot. I ended up mixing around 4 gallons of coco/perlite and I used around 12 tsp of Stash Base. My goal is to provide the areas where initial vegetation root expansion some extra Stash boost, and I am excited to see how this plant works as my first introduction of Stash in the grow. For my watering and pre-moistening mix, I will use the following recipe: 1 Gallon RO water 6 ml Ventana Plant Science Support 2 ml Ventana Plant Science Grow .5 ml Ventana Plant Science Structure 1 ml Mammoth P Active Microbes for watering in For each plant, I will water in around 1 liter where the root ball meets the new coco, with a bit of water (maybe 250 ml) on the root ball area itself. Once transplanted, I will adjust to 300 PPFD and let everything settle down until I start training. Each transplant went well and let's hope we continue with a beautiful veg!

This week has been going well, a bit cold in the dark hours! But these girls have been starting to flower nicely and im super excited! Its taken me some time to get the watering down with the living soil but im making it work! Ayeee much love, excited for this northern lights ✨️ happy growing

10/17/24 Short facts: - Continued with LST - Watered: 1 x 1.2L, 1 x 0.3L, 1 x 1L - VPD @ 0.9 — raised by 0.1 - Light @ 50% ~500 to 560 PPFD - Removed 2-3 leaves --------------------------------------------------------------------------------- As promised last week, i made a video and explained the progress so far, and did show you the plant. Not much to report. I continued LST, though I’ve stopped for a few days now since the branches are well spread out, and that should be enough for the time being. The Lemon Cherry Cookies is lacking behind in her development, maybe she got a little bit less light, because she is a little bit smaller than the other two plants.

Going good!

Welcome to Week 1 of the Sweet Seeds Gorilla Girl XL Autoflowering grow courtesy of the fine folks at Sweet Seeds! This is the second of three consecutive grows/diaries that I am doing to showcase the tried and tested genetics from this reputable seed breeder. My last grow was a smashing success so I have high hopes for this grow as well. Nothing much to report for Week #1 although I will mention that the first watering was only 0.7 of a litre per plant (0.18 of a litre per plant per day) and the second was 1.4 litres per plant (0.35 of a litre per plant per day). I am watering on my usual schedule of every fourth day as this seems to be the sweet spot throughout past grows. I am using the usual- air bubbled tap water that is PH’d to around 6.0 and if need be (over the winter months in Canada) warmed to 68-70 degrees prior to hand watering with a small watering can. The seedling that lost one of it’s cotyledon leaves is fine but still a little smaller than her sisters. So now on to Mom’s tip of the week… Mom’s Tip for Week #1 is- YOU GET WHAT YOU PAY FOR- QUALITY IS KEY!… When considering growing Cannabis, even on a small scale, quality is an important factor in all aspects from the seeds to set up to the supplies used throughout the grow. Starting with seeds from a established breeder will raise the odds considerably in your favour for a successful outcome. Many seed companies are more than willing to ship out freebies while building up their brands which seems attractive to new growers- but use at your own risk! There’s nothing worse than being halfway through a grow and discovering male flowers tucked in amongst the lowest branches or realizing that your beautiful buds have been mysteriously pollinated just weeks before harvest. I know that seeds from a reputable seed breeder are usually more expensive and can be hard to access in certain parts of the world. But purchasing quality seeds from a reputable seed company is the first step towards homegrown Cannabis success. An area that new growers often overlook due to the high price is the quality of crucial components in their set up- including tent, lights, and intake/exhaust fans. Anyone can get away with cheaper pots, oscillating corner fans, water pumps for dechlorination, etc but it’s worth every penny investing into the workhorses of your entire operation. An initial investment of around two thousand dollars will provide serious growers with the longevity and hassle free basics needed. If done right, quality components will pay for themselves within the first 6-12 months of use and continue to serve your needs for 3-5 years to come. Supplies used throughout the grow are the final area where quality is important but somewhat subjective too. Although I’ve already stated that I don’t feel the need to spend big dollars on all the extras (pots, oscillating fans, water pumps for dechlorination, PH/moisture meters, etc- I do believe in doing my homework to make sure that I’m getting the best bang for my buck. I thoroughly research every item purchased and used in my grows by reading customer reviews, speaking with other growers and sometimes even trial and error at my own expense. Making quality an important factor in all aspects of Cannabis cultivation will benefit you, your grows and the planet we live on. 🌳🌎🌳

colheita

สุดยอดมากสายพันธุ์นี้ ฉันรักมัน ฉันจะกลับมาทำให้ดีขึ้นกับรอบต่อไป แน่นอนเก็บโคลนไว้

Wow she is looking beautiful and I am very happy with the results so far!

IM SLOWLY MOVING ALL THE PHOTOPERIODS INTO THE 8X8 TENT. THEY HAVE BEEN IN VEG FOR TOO LONG AND STARTING TO SHOW ROOT BOUND SYMPTOMS, SO IM HOPING I DIDNT WAIT TOO LONG TO FLOWER THEM🙏🙏🙏🤞🤞🤞 FOR EVERYTHING MARS HYDRO VISIT: www.mars-hydro.com www.marshydroled.ca PROMO CODE: rocknroll VISIT THE ALIEXPRESS STORE: @marshydro_aliexpress Instagram: @marshydropenny Thanks for taking the time to read and check out my diary🤜🤛 TS3000 FEATURES: WIDEBAND SUNLIGHT FULL SPECTRUM LED GROW, Infinite close to natural sun light, suit for all plants whole stages indoor growing, rapid plant response from seed to flower, achieve maximum quality and quantity, much better than traditional HPS grow systems. HIGH REFLECTIVE & NOISE FREE-Fanless LIGHT BOARDS design will make your growing life easy and quiet, quickly heat dispersing material aluminum reducing light lost to aisles and walls, increase the light intensity up to 20%, allowing your plants receive more energy and without burning your plants for maximum headroom. HIGH EFFICIENCY ENERGY SAVING PLANT LIGHT, high-power NEW LED grow, Compares to traditional 3000 watt HPS lamp and other brand led grow light while only 450 watts true output with 1016 LEDs, more scientifically and energy-efficient! Perfect for 5' x 5' veg stage, 4' x 4' bloom stage, higher intensity in a MARS HYDRO grow tent, reflective area, or by crossing over using multiple TS3000. BOOM YIELD LARGE GROW LIGHT, NEWEST SMD LED technology provide highest PAR/LUMEN output(1095.6umol/), makes you get 30% higher yield compare OLD led lights, can get max yield at 2.5g/watt, less pay but get more yield, bring a amazing grow trip to any home grower as it beams huge amounts of light energy to plants below. COMMERCIAL LED GROW LIGHT, Updated easy dimming & daisy chain function, main light controlled, especially come with two waterproof and dimmable Mean Well Drivers, auto sensing power supply works on both 120VAC and 240VAC and 277VAC, suit for Large Rooms and Commercial Setups. Low Energy-Consuming LED Grow Light: Consuming 300w and also mounted with 1016 chips, TS3000 has the ability to replace a 450w HPS light while reducing 40% power intake. High Efficiency LED Grow Light: With overall light output PPF 343umol/S as well as amazing PPE 2.3 umol/j, it's 50% even more photon efficient and can assure a 30% more return than the old HPS/MH lights. Patent Highly-Reflective Hood Shape: The reflector design on TS3000 is patented, which can effectively gather the light dispersed in all directions to enhance its light intensity as well as assist plants in absorbing more light. Full Spectrum Plants Favorite Spectra: By the unique mix of spectra that makes most light in the 400-700nm waveband, incredibly conducive to plant photosynthesis. Adequate IR(730-740nm) is additionally consisted of in the range to generate larger buds. Dimming And Daisy Chain Feature Available: Upon an independent dimming button on the external driver, backing 0-100% settings adaptation and up to 30 LEDs daisy-chained in a group, it supplies different light levels for various plant stages meanwhile saving energy. Safety Certifications And Service Warranty: CE, ETL, RoHS, UKCA security certifications accepted, 50,000 hours durability, 5-year service warranty, and local after-sales repair 5x5 GROW TENT: LOCK ALL LIGHT INSIDE MARS HYDRO Indoor Grow Tent interior is made of diamond mylar which is highly reflective. (Other brand's mylar and reflective rate is as low as 50%, won't provide efficient light. )MARS HYDRO 1680D canvas, being double stitched, it is tear proof and has perfect light locking. Mars Hydro's grow tent keeps 100% lighting beams inside and helps your plant absorb more lights. EXTRA-THICK --No light leaks or rips at all DURABILITY GROW TENT Stable metal corner adapters and poles are the trustful supporters of the tent, standing sturdy, neither rusting nor paint-falling, quick easy tool-free installation. Mars Hydro's heavy-duty metal zippers, with double layer black lining, are the best on the market which create a light-proof seal EASY OBSERVATION FOR YOUR PLANTS. Special observation windows are made by double layers of cloth. Observe the growing conditions of your plants without opening the tent and avoid disturbing plants. The observation window also serves to dissipate heat and ventilate air AUTOMATIC 6 INCH EXHAUST FAN KIT W/ CONTROLLER: Mars Hydro 6'' Inline Fan uses a mixed-flow design to maintain peak performance in a high static pressure environment. GROW TENT FAN: MARS HYDRO inline fans are designed to ventilate hydroponic grow rooms, transfer heating/cooling, cool AV closets, and exhaust odors. EFFECTIVE VENTILATION: Variable speed controller for easy fan speed adjustment. Optimal ventilation for your planting. LOW NOISE LEVEL: Durable plastic fan housing and blades for extremely low noise(32dB-A); create a truly quiet growth environment. EASY INSTALLATION: Removable duct ends with locking tabs for quick removal and easy maintenance and a cord length of 4.9 feet for hassle-free setup. This grows tent fan with a controller for easy fan speed adjustment. BASIC PARAMETERS: Ventilation exhaust fan size: 6” | Dimensions: 315mm*225mm*210mm. | Weight: 2.7. | Airflow: 402CFM | Noise: 32dB-A | Bearings: Dual Ball. 

This ladies got pretty big for real, hands down the biggest autos I've ever had grown in 7l pots, excellent performance, and the flowers start to stink really strong, there is one pheno which is more developed than the other 2 phenos but the 3 have developed really good and they are producing a lot of sticky and stinky trichomes! Let's see how this will end up! Can't wait 🤤

We are starting the last weeks. Ripening and trying to get them salts out before its harvest time. LSD-25 still the Star of the grow. And thats good, because its my favorite strain. 😁

This strain of Kings kush is a smelly one, I still can put my finger on the terp profile yet. Almost a kushy herby dank is all I can describe atm. Growing these plants, I would suggest pruning every second node once you get her into flower since the bugs tend to push up against each other and may cause bud rot. Say ontop of defoliation and try to qork on them on a daily basis rather than lolipoping. Another key thing is to keep rH in range during flower, I will recomend to set it to 40-50rh in flower. Also if you are growing outdoors, Be sure to cover them up during rain when in flowering, I uses a transparent tarp for the last 5 weeks of flower. Save my plants from 9 huge rain events during the last 5 weeks, my plants would of died from br. This strain had some decent cold resistance also! She stay alive with with few events of temps getting down to 4 deg c.

Super easy trim✂️ The buds are super dense & sticky🤩 For the smell it’s cherry & blackcurrant with a gassy touch the Cherry Cola Diesel ⛽️🍒

Major defoliation/ lollipoping that happened this week right on day 20 my main concern was looking for more hermies (due to stem cracks from lst) and also cut out any lower branches that where going to make larfy buds. I only cut up the branches untill the point that the budsites where at least a nice pistil cluster (10and up ) some branches got a good 6-7 inches shaved off some more like 2-3 just depends on the plant with so much variety. Also my plants are like touching the lights it just wont let me mark less then 4inches i have the ability to raise my light another 2inches so i will definitely be doing that. For now i have the taller branches off to the sides so the can outgrow the light without burning. Smells finally starting to come in with more gassy earth coming from DD and devine chocolate GG4 smell coming from the mellows Still see some nitrogen toxicity not sure if should cut all nutes in half considerIng week three biogrow increases to 3ml/L

So these 2 grew a little different, one from the other... They really thought me so much... Great growth all grow throughout and the low hight helped to avoid light burn, something I had trouble with last time. Will chop the second one in a few days time and add more info... Added some Bison pics

Hi all 😁 Hope everyone keeping well and having a wonderful week! Thank you all for such amazing support on this bananas journey 💚💚💚 Will be updating this week journal daily so please remember to revisit to see full week content. So far this grow it's going great. Girls are stretching by hour. Great health, nice green colours, more and more squares taken on the netting, flowering nicely progressing, I'm very happy 😁 Planning to apply more selective defoliation, especially to Xena. No changes to nutes except few extra drops of calmag just in case and will try to fill the net entirely. Week 7 Nov 27- Dec 3 Nov 27 Selective defoliation applied on Xena. 8-10 mainly small fan leaves. She is still a bit shy to open as much as her sister. No rush my girl. You still doing great! Nov 28 First watering for this week. 7ltr beetwen them both with 4h spread. Runoffs. Xena 300ml PH 6.1 Athena 250ml PH 6.4 😁. So far the largest amount of my magic mixture consumed by my 🍌💜👊 girls. Well done👏 Nov 29-30 Leaves tucking and joyful observation🤓 Dec 1 Selective defoliation and first stage of lolipopping on both girls. Decided to go a bit heavier as tomorrow heading for trip and wont see my girls until Tuesday! They will be all alone without any supervision so hopefully they will behave and I will be nicely surprised of their development on my return. Watered with 2tr mixture and sprayed with water and fish mix solution right after defoliation. Planning to feed them tomorrow as much possible 6-7ltr before heading off to our voyage to Amsterdam 😎 do anyone know ls if any of coffeeshops have Fastbuds strains available? Would love to try 🍌💜👊🤤😋 Dec 2 Girls watered as above and both PH 6.4 on runoffs. Dec 3 Girls are unsupervised until December 5th. Thank you all for such amazing support on this journey 😊 love you all!!, 💚💚💚 Stay tuned for upcoming week update right after my return. Peace and love brothers and sisters ✌️💚