This week has been pretty smooth sailing. Since all 4 of the testers are being watered at the same time splitting a gal of water ph to 6.1 with products listed. Started some LST on them this week and seems like all the babies are doing well. Tester 01/#1 by far grown the most at this point but time will only tell how they will all turn out. Enjoying this grow quite alot and am super excited to see how it goes.

Ich Warte nochmals 1 Woche, trinken fast 6 Liter pro Tag

Here we are about a month and a half in and we’re still veg, not even a sign of gender yet no pistils at all. Super bushy keeping up with the low stress training each one has approximately 10 tops.

Que hay familia, volvemos con las crazy cookies, que variedad más locura no veas que puntones se han formado , variedad algo lenta en cuanto a floración pero valdrá la pena . Ph controlado temperatura también dentro de los parámetros , humedad baja, menos de 45%. Pronto aportamos overdrive y veremos cómo terminan de hinchar.

~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_ 3/26/22 😻 First day of week 6!! These girls are starting to get REALLY frosty!! We dropped the MarsHydro 2inches this week, we're approximately 22" from the lowest and 18" from the highest part of the canopy..we're monitoring closely, we've burned plants close to this distance before.. the extra shot of N straightened their color out fast, they look great today..we removed all large fans just from cola tops so they receive as much direct light as possible for the next few weeks..its been an effortless run so far!! We'll upload again midweek. thanks for dropping by and happy harvests everyone!! ⚡Mars Hydro/SP-3000⚡ Specifications ⚙️: Diodes: Samsung LM301B / Osram 660nm (960 total!) Driver: Meanwell 300watt 🔌 (300W±5% @AC120V-277V) PPF: 824umol/S ☢️ PPE: 2.8 µmol/j 〰️〰️ Lifespan: 50k+ hrs ⌛ Weight: 10.1 lbs (4.6kg) Veg Coverage: 3 x 5 ft 🌱 Flowering Coverage: 2 x 4 ft 🌼 -The SP-3000 uses an aluminum heatsink (no fan) and the driver can be placed outside the tent 🌡️⬇️ -IP65 waterproof ratings, tolerant to high humidity grow environments 💦 .. -Up to 15 can be daisy-chained together and all controlled from a single light! 💡~💡~💡~💡 ~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~ Song: "I got a girl" Artist: Philip Morris ~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_

I will be getting 1000 phyto mites to kill the spider mites in my tent & in the meanwhile i chaugt about 50 ladybugs & put them on my plants, i hope they both do the job right haha

I gave Isopropyl alcohol 70% equal parts water, 1 tsp cayenne, and kept enough for multiday application, what little population of aphids is left I shall catch them the next morning, opening the tent 10 min before lights on the clovers have yet to open, all the aphids hiding on undersides are easily visible, still none ever went near cannabis plant. Clovers are far tastier it seems. The alcohol kills on contact, the idea was to saturate the leaves with a light foliar application, and once I was done I ran it through the canopy with my hands making sure as much of the clover surface came in contact with the iso, once done turned on the fans and evaporate it quickly. Beautiful thing about Isopropyl is that it evaporates rapidly at room temperature way below boiling point leaving behind zero residual so nothing seeps its way into rootzones unless you spill it there. It is a magical solvent that leaves no trace that it was ever there. Resonant Frequency: A resonant frequency is the natural vibrating frequency of an object and is denoted as ‘f’ with a subscript zero (f0). When an object is in equilibrium with acting forces and can keep vibrating for a long time under perfect conditions, this phenomenon is resonance. In our daily life example of a resonant frequency is a pendulum. If we pull back the pendulum and leave, it will swing out and return at its resonant frequency. Objects combine to form a system, this system can have more than one resonance frequency. The resonant frequency is termed as the resonance frequency. The phenomena of resonant frequency used in the series circuit when the inductive reactance (XL) is equal to the capacitive reactance (XC). If the value of supply frequency is changed, we can observe that the value inductive reactance (XL) and capacitive reactance (XC) is also changed. Inductive reactance (XL) and capacitive reactance (XC) are inversely proportional to each other. When we increase the frequency, the value of XL increases, whereas the value of XC decreases. When we decrease the frequency, the value of XL decreases whereas the value of XC increases. At series resonance, when XL = XC. The mathematical equation of resonant frequency is: XL = 2πfL; XC = 1/2πfC XL = XC 2π f0L = 1/ 2πf0C ; f0=1/2π sqrt{LC} Where f0 is the resonant frequency, L is the inductance, C is the capacitance How to Calculate the Resonant Frequency of an Object? An object exposed to its resonant frequency can vibrate in symphony with the sound. The wavefronts pushing on the object will arrive at just the right time to push the object with greater and greater amplitude in each cycle. To get a clear idea of this concept one of the best examples is pushing a friend on a swing. If you push the swing randomly, the swing will not move very well but if you push the swing at a specific time, the swing will get higher and higher. Another example to find the resonant frequencies is to place the object next to a speaker and place a microphone attached to an oscilloscope next to the object. Then play the sound in the speaker at a given volume, and then without changing the volume slowly change the frequency. Now observe the oscilloscope, you will observe that at certain frequencies the amplitude of the wave, is proportional to the volume of the sound that the microphone is able to pick up. The frequency that is caught by the microphone will be greater than at surrounding frequencies. These are the resonant frequencies and are detectable as the sound energy absorbed by the object is re-emitted more efficiently at these frequencies. The precise moment that constructive interference happens the amplitude of the wave will spike at the precise frequency emitted. Q: Compute the resonant frequency of a circuit whose inductance is 25mH and capacitance is 5mu F? A: Known values are, L = 25mH = 25 x 10-3 H C = 5mu F = 5 x 10-6 F Formula for resonant frequency is, f0= 1/2π sqrt{LC}1/2π√L f0=1/2 ͯ 3.14√ (25 ͯ 10-3 ͯ 5 ͯ 10-6) = 450.384Hz Why Neodymium? Ferromagnetism is an exciting phenomenon observed in certain materials, known as ferromagnetic materials, that can retain their magnetization even after removing an external magnetic field. Ferromagnetic materials can become ferromagnets and interact strongly with other magnets and magnetic fields. A characteristic of ferromagnetic materials is their magnetization ability, distinguishing them from paramagnetic and diamagnetic materials, where weak magnetism exists temporarily. This unique property allows for making permanent magnets widely used in various applications such as motors, generators, speakers, and data storage devices. The ability to generate and maintain a magnetic field without the need for a constant external source of power makes ferromagnets highly valuable. An alloy of neodymium, iron, and boron discovered in the 1980s is ferromagnetic, yielding permanent magnets over 1000 times stronger than anything ever seen before. The name neodymium comes from the Greek neos didumous, which means "new twin." Neodymium magnets are made of an alloy of neodymium, boron, and iron. This allows them to simultaneously store impressive amounts of magnetic energy while being highly resistant to demagnetization. Because iron oxidizes quickly, neodymium magnets are coated to prevent rust from accumulating. The attraction between two neodymium magnets is so strong that if placed close enough together, they can collide and shatter. Neodymium magnets have an unusually high-temperature resistance, and they can even withstand heat exceeding 200 degrees Celsius. N50UH 1-1/2"OD x 1.065"ID x 3/8"

Wk4, Day22, 4/27/22 Wk4, Day23, 4/28/22, continued defoliation and tied down tops, each plant has at least 6 tops Wk4, Day27, 5/2/22, no issues requiring adjustments Wk4, Day28, 5/3/22, heavy tie downs and defoliation to finish Wk4

Plantas de buenas estructuras y fácil de cultivar ,resistente a las plagas y estrés hídricos. "WAKA" pasará a ser una de mis favoritas ,( guardaremos madres ) . una genéticas maravillosa muy resinosa de cogollos compactos . Olores muy marcados a cítricos especialmente limón y otras más dulces esto también se refleja al momento de degustar las flores al fumar. Seguiremos trabajando esta genéticas con las madres que seleccionamos de los fenotipos que más nos gustaron . Corte : 08.12.2019 (secado) Curado : 23.12.2019( puestos en frascos )

Last day of lights exposure. The buds will now go into a 48 hours of darkness. Last watering was done 2 days prior. The plants will use the last bit of energy to produce more resine . Trichomes are 10% amber .

9/16 Day 8: transplanted 3 of them into 1 gallon plastic pots. they werent very rooted but the roots they did have were healthy and thick. will transplant the others as soon as i can. Up potted about half of the tent. i need to set up another tent 9/18 day 10 transplanted the last 2 plants into 1 gallon pots. im reusing soil with them and i dont normally do that. hoping that there arent any random issues to pop up. 9/19 finally numbered the plant's. #1 is the one that's looking more sativa leaning. she has longer petioles or fan leaf stems. Longer, thinner leaves and has stood out from the rest from the very beginning. im going to use the terms indica/ sativa and hybrid as generalized terms. on the other end #5 is super short and tightly spaced nodes. has a more even indica style look to her. #'s 2-4 i have noted as being "hybrid" as in they look to be a mix of both and not on one end or the other such as #1 and #5 are. also onr of the hybrid ones has super thick indica maple leaf style leaves that stands out as well. these are more so for my notes and i understand that these are all technically hybrids 60/40 sativa/indica i believe.

Stressing them out let’s see what they got

~3cm vertical growth this week. I decided to put her in her 10 Litre fabric pot forever home.

(3.8.22) Day 21 of flower. Watered each plant 2.5L of nutrient mix. POST NUTE FEED RUNOFF LEVELS: Plant 1: 1605ppm, 6.2ph Plant 2: 1367, 6.6ph Apprehensive/not sure how to go about further defoliation. I’ve removed everything from below the net, and taken away every fan leaf that looks like it’s not directly connected to a bud site. Everything that remains appears to be connected to a bud site. Do I need to remove more? On one hand, I’m afraid that I’ll end up stressing out the plant this far into flower. On the other, I’m afraid of possibly running into PM at some point. RH is increasing with the warmer weather (between 45-55, 65 on a rainy day). Lots of little leaves laying on each other. Thinking about getting a small dehumidifier to put into the tent. Also, just going forward with future grows, should I have removed every branch that grew out of one of my mains? If you look at the photo below the net, I’ve got my main branches and all those little stems that branched out seem to be what’s really causing the crowding. I thought the point of LST was to have it do exactly that, but looking at everyone else’s grow it looks like they just limit themselves to the big main branches and clean up everything else. (VIDEO) I've got two 6" fans. One at the bottom right under the net blowing up, one at the back left above the plant (but slowly being taken over) blowing down. Everything in between seems to be dancing around with air. It being my first grow, I'm not sure if I'm not doing enough or overdoing it lol (post script): For plant 1, the scrog net is only 8 inches above the soil. With plant 2, it's only 5 inches above the soil. I was so concerned about the plant "possibly doubling or tripling in flower" that I really LST'd my plant early on and did my best to level her out. As a result, I was able to fill out the perimeter of my tent easily, but there was not much vertical growth to speak of. This meant that when I put my scrog up, it was barely above the rim of each pot. Next time/grow, I may experiment with letting the plant get a little more height before leveling her out? Idk/not sure. Also, my light placement was close enough that my node spacing was VERY tight. I've read that this is a good "problem" to have, but I can't help but thinking if my plants had a bit more verticality to them they'd be easier to work with. (3.10.22) Watered both plants with 2.5L of ph'd water. Was a bit lower than I would have liked at approx 6.2ph, ppm was 83 Post water runoff: Plant 1 - 6.2ph/1248ppm Plant 2 - 6.3ph/776ppm

ALRIGHTY THEN GROWMIES 😎 REMINDER I DO 2 UPDATES PER WEEK 👉WEEKLYROUNDUP👈👉MIDWEEKLY UPDATE👈 We just hit week 7 and all is well , have to admit she's just killing it super happy with how shes coming along 😃 ....... I'm still training her with LST and it's looking good 👌 And she's filling out the pot perfectly👌 Lots of tops 👈 Have had no troubles with her what so ever, rain water to be used entire growth Lights being readjusted and chart updated .........👍 I GOT MULTIPLE DIARIES ON THE GO 😱 please check them out 😎 THANKS FOR TAKING THE TIME TO GO OVER MY DIARIES 👍 👉IF ANYONE IS LOOKING FOR A PLACE TO HANGOUT VIA GROWDIARIES AND TALK GROWING AND JUST CHILL AND WHATEVER .....👈 👉I CREATED GROWDIARIES DISCORD SERVER !!!!!!!!!!!👈 LINK IS 👉 https://discord.gg/zQmTHkbejs AND SEE HOW IT PLAYS OUT !!!!!!!

Em atualização

I have forced flower a few days ago so not to overbush her when she stretches in this period in going to stick her down in this first week of flower to keep her lower to the soil and opening her up it also hardens out the branches to support the buds better Day 33 pinned her down just 2 nodes further down the line so the stay horizontal

This strain is just incredible, perfect indica high with a sativa sidenote It grows strong and is quite resistent to mold. All plants were done after about 60 days of flowering. First time i used a tumble trimmer and it works perfectly. I didn't check PH or EC at all

12/12-Tried to get the girls in the ground 14 days after sprouting but life got in the way. They spent 17 days under a blue light for root growth. They are planted into some high quality living soil. The room is clean and ready to go! Planted 3 in 7 gallon pots, planted the other 3 in 5 gallon pots. We will see who yields more or the same 🤷‍♂️🏽. I am going to push these girls hard! Purple City Genetics TONGUE KISS- Grapenana X PapayaBomb 12/14- Turned the lights up today. They are running about 3100 PAR MMOL. This Mylar is 97% reflective. It cannot be attached fixed. It needs to be installed dynamic so the light is diffused and not focused. Lighting the room and not the plant when possible is ideal. The clones in the pics are from the CloneGuy. I may start a diary on those 🤷‍♂️🏽

11/20/23 - Day 14 - Today the box flipped to Veg state. I made the decision in the software yesterday, its take effect the next day at the light on schedule. The system will do a couple of things now that it's in Vegetative mode. Lights will remain at 18Hrs On/6hours Off, however the intensity will slowly creep from 30% intensity to 100% within a couple of days. Air Temp will remain the same at 79deg. F Humidity will go down to 50% Water temp and PH will remain the same, 64.5deg. F and 6.0Ph Because I have it all hooked up for Auto water. It started the first video about 1 min after lights on. It drained the water, refilled it. After it refilled it, it turned on the air stone, started the water temp cool down, and it slowly over the next 30 minutes delivered nutes, and finished it off with balancing the PH. All of this was done on its own. I DID NOTHING. Other than verify because why not. I sat back and watched the system work. This time around with everything hook up for auto I really am not doing much. The hardest part of this grow so far is not opening the door while the light is off. the rest of the week I don't expect to do much. I will update daily with pictures and things that I am noticing. This is an Auto strain. I am a little worried about growing an Auto in this box. usually, I can control the growth utilizing the lights because I'm space limited. This time the plants going to flip to flower on its own. I'll need to make sure I am training and cropping early on. 11/24/23 - Day 18 - Everything is starting to get aggressive in there. I say that because the new nodes are growing out of new nodes on the top. It's like its packed full of plant and it all wants to come out at the same time. The leaves have more serrated Leafs than I have seen on any of the other strains I have grown. Ill post a picture of the last time I grew this strain. I did it in Coco Coir. It will be cool to see the differences. 11/25/23 - Day 19 - The Leaves are all reaching up, and the plant is growing so fast! Its such a bushy plant.