Likes
Comments
Share
@PapaTerps
Follow
Night Ritual - Wizard Trees Day 116 🚿 Watered every 2-3 days with 2L of RO tap water pH'd to 6.3; I wait for her to dry back to about 5% soil moisture content. As she is approaching harvest, I have slowly reduced the nutrients until she was receiving just plain water. From today, she is just about half way through flush, so another watering and then she'll be left to dry back. ✂️ No work on her this week, she had a good defoliation last week, so she is just sitting there waiting for harvest 👍🏻 🌸 Week 9 of Bloom, and all her trichomes have taken on a cloudy white colour, with her pistils drying and becoming amber. She has been thoroughly flush over the last 10 or so days, so she should be good to harvest in the next couple of days 🙌🏻
Likes
23
Share
Week 15! Nothing much to add. She is plumping up nicely. She is not using as much water as she was when the buds started forming. I can leave it for 5 days no problem.
Likes
21
Share
@NG420
Follow
Fattys are growing and seem to be thirstier.Used foliar spray to help the leaves and also started tucking. When the plant was topped pistils were seen for first time.
Likes
111
Share
@DevilsBud
Follow
10/10/21 new week for Hyper glue Growing almost a month now did some topping last week and today started to LST the main everything going great so far plants loving the new FC-4800 so as i absolutely no extra heat is coming of them 👌🏻 I maybe will top some more but as far it Goes for LST this will be the only thing i will do to the plants let the rest grow freely one hyper glue has to wait for main LST 12/10/21 The other hyper glue got LST clip on the main and think this was one of best ones so far 14/10/21 Growing very nicely giving them the watering and nutrients when they need it . I am trying to understand plants better by looking at feeling soil etc instead of a regiment. And learning we do every day because bin growing in 11L pots but now in 8L pots so that means that there gone be smaller then my first grow . But hey got now 12 plants going on and not 4 so that will help lol 15/10/21 Did some small defoliation and some of them get light penetrating better visit www.marshydro.eu for your best gear and use the PROMO CODE: DEVILSBUD Fully marshydro supported Setup: Marshydro GT120x120x200 Marshydro FC-4800 LED lamp Mars Hydro tent handy info ●【Lock All Light Insid】MARS HYDRO Grow Tent Interior is made of diamond mylar. Non-toxic to the environment, no harm to plants. High-quality 1680D canvas being double stitched, (ALL OTHERS BRAND grow tent is 601D canvas) which is tear-proof for perfect light locking, No light leaks or rips at all. ●【Durability Grow Tent】Stable Metal corner adapters and poles are the trustful supporters of the tent. No rusting nor paint-falling. Quick easy tool-free installation. Carries strong heavy-duty SBS zippers, double layer lining to create a light-proof seal. ●【Easy Observation of your Plants】Special peeks window made by double layers of cloths. Observe the growing conditions of your plants without opening the tent and avoid disturbing plants. The peek window also serves to dissipate heat and ventilate air. ●【Removable Tray Keep Clean】The package includes a removable waterproof floor tray to hold soil and fallen leaves. The tray can be taken out easily to wash. Removable and water-proof makes cleaning easy. ●【Good Ventilation&Fast Assembly】 Circular double-sleeved vent holes with adjustable nylon strap for air circulation by exhaust fan, ducting, carbon filter, or reflector. Better allows proper light, heat, and airflow. Quick tool-free installation. Reinforced by a sturdy metal frame to ensure security and stability, supports up to 140lb. Perfectly safeguard your plants to thrive even in winter.
Likes
7
Share
@Organic_G
Follow
Ein wunderbarer aber auch anstrengender Grow geht zu Ende. Erstes Mainlining, erste Photoperiodische im Zelt… Qualität, Resistenz, Geschmack 🤩super Habe bisher nur einen geraucht, THC hat mich gut weggehauen, hätte ich selbst nicht gedacht
Likes
17
Share
Buds r maturing nicely and loads of colas on her. Tips of leaves r showing nutrient burn so I halved the nutes and will see how it goes. Think that terpinator sent it over the edge with all the other biobizz nutes too. It better make the buds stink!! Another couple weeks n she might be ready!
Processing
Likes
25
Share
This big, beautiful healthy girl has switched to flower. Cooler night time temps are yielding some red streaks on her stems. Excited to see what these flowers will look like. She smells fabulous! She was given some Coast of Maine 5-2-4 around her base yesterday, and I have some BT arriving tomorrow to thwart those pesky inchworms.
Likes
5
Share
All three girls are officially in bloom! 🌼 #2, our surprise LST candidate (thanks, fan 😅), has now also entered flowering, and is looking strong! #1 has shot up and is clearly the tallest in the tent, stretching like there’s no tomorrow. Meanwhile, #3 decided to skip the gym and focus on curves, she’s staying short but growing wide, even without any training 💪 Overall, everything is going smooth, healthy. Let’s see what these girls bring in the next few weeks!🌱
Likes
1
Share
This week they have started to stretch, especially Lemon Cherry Cookies. Their lengths are now: L.C.C: 33 cm Guava: 31 cm Apricot: 27 cm Guava and Apricot started to stretch later, and they're getting bushy. LCC has stretched to a great wide shape. Sadly I rushed the training session a bit, and one of the four main branches on the Guava plant snapped right off. I taped it and now it has recovered and it is growing well. I have set the lights to full effect, but I have risen it to 80 cm above the canopy to get less light intensity in the beginning of flowering. It's starting to get warm, and I have to try to keep the temperature down...
Likes
7
Share
@starke
Follow
Day 85 - first day of Week 13 and she is going into darkness for 48 hours. Hasn't been watered since 2 days. Even though she looks the least done of all three, her trichomes are now a good 20-30% amber with the rest milky and some tiny bits of clear. I checked her buds on the calyx all around, from top buds to middle to bottom. She really shows a lot of heavily swolen calyxes, which I have never seen like that. I can now add that to the things I learned/experienced: calyxes swell a lot before the plant is finished. Let's see. My Girl Scout Cookies does not look like she even has calyxes. Funny individuals. Happy wedding cake day, almost 😍 Day 88 - out of darkness. She was in there for 2,5 days. Opening the drying tent she gave off a really strong smell of hash 😍wow. She has some nice looking buds and looks def. more done, but below her dress, she has some light fluffy buds. I have hung all of them now in the dry tent, after I removed some of the bigger fan leaves. One part of it, I think I want to low and slow dry in the fridge. I am interested in finding out about the difference in taste, when a more wholesome profile is retained. For anyone interested, I can highly recommend this forum and this article: https://www.420magazine.com/community/threads/drziggys-low-and-slow-drying-maximizing-your-harvest.366783 Another part I would like to use for fresh cut oil, also from here: https://www.420magazine.com/community/threads/fresh-harvest-infused-cannabis-oil.363371/ As with everything else, I was obsessing about the perfect dry room & conditions. I bought a small tent (40x40cm), a small oszillating fan hung over the buds/on top of the tent. Due to size limitations, I have the filter on the bottom with the duct leaving the tent at the bottom connecting to an exhaust fan. Inside the tent I have a humidity sensor from an Inkbird Humidity regulator. Connected to that is a mini-dehumidifer and a humidifier. I have set it to 20°C (68F) and 50-55% humidity. I'm excited to see how long my dry will last this time. My first grow was drying way too fast in the middle of the heat wave last year with 30% humidity. The overview added to the pictures, I started making over Christmas. It was when I noticed, that I'm a so impatient, and that something must be wrong, especially in the first weeks. I get so obsessive, that I tend to overcare. Which she showcases beautifully in this overview. I hope this will calm me down the next time. Oh my haha Let's see what the final dry weight is. My guess is about 25-35g. Any other guesses? Happy Wedding Cake day 😇
Likes
2
Share
@Ninjabuds
Follow
My Grand Turismo plant is looking amazing! The leaves are a really vibrant green, and they have this cool, almost waxy texture that makes them look super healthy. It's growing nice and bushy, and I'm loving the overall shape. This one's definitely a showstopper, and I can't wait to see how it blooms. Stay tuned for more updates on this beauty! The weather has been absolutely gorgeous this past week! We've been hitting that sweet spot of 70 degrees during the day, perfect for getting outside and soaking up some sun. Then, it cools down to a comfy 50 degrees at night, which is ideal for sleeping with the windows open. I've been loving all the fresh air! I finally got around to building that little wooden planter for my windowsill. It was a fun project, and now my regular plants have a nice new home. It really brightens up the room, and I'm thinking of adding some herbs to it soon. Maybe I'll even try growing some basil!
Likes
15
Share
Likes
15
Share
@CG420
Follow
Comenzamos semana nueva sin síntomas apreciables de flor . Las plantas han crecido bastante esta última semana llenando totalmente la superficie de cultivo. Esperamos terminar la semana viendo algún síntoma más en nuestras pequeñas.💚
Likes
36
Share
@SAC87
Follow
Hi Growers. These little plants have been cruising along just fine. The whole week they have just been sprayed with ph RO water with a touch of cal pow. Yesterday I noticed they were a bit lighter in color and using peat based medium with zero nutrients I decided to feed according to the FastBuds suggested 1/8 strength. It still ended up being around 225 ppm. I also raised the light 3” as I noticed the serrated leaf edge starting to point straight up. That SF4000 is a beast against tiny plants even at 30%. I’ve got the environment at approx 77 & 60% with a oscillating fan and humidifier running. I finally was able to remove that shell helmet off the middle plant. Once I did she immediately took off. I just sprayed and saturated the membrane and ultra gently manipulated it til one cotyledon popped out and left it alone. The hull fell off the other side by itself. All in all they’re looking happy and are doing what they should be. 🤞👍🏻🌱 Happy Growing 🌱